I just received this skin for my Evo:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=400129173520
1. Way thinner than the HTC silicon rubber case
2. Somewhere between hard plastic and soft silicone. Think vinyl but stiffer.
3. Definitely not as shock absorbent
4. The skin extends up past the face of the phone about 1.5mm, so if you set the phone face down it won't touch the surface
5. It does not wrap around the face of the phone at all, which I like -- it gives you touch access to the entire touch screen surface, as opposed to the HTC silicone rubber skin. It's much easier to reach the edges of the touch screen, like using the phone naked
6. The top of the camera lens protrudes slightly from the back of the case. However, due to the curvature of the phone, when resting back-down on a table, the lens doesn't actually contact the surface by a small gap, .5mm at best
7. The argyle pattern on the back is very subtle
8. All the cutouts line up properly. The cutouts are rather large however; for example, the diameter of the cutout for the speaker hole is probably 5mm which is a bit excessive.
9. The skin is not tacky at all, it slips in and out of the pocket with ease and doesn't attract lint. However it's more slick and less grippy, so it won't stay put on your dashboard for example.
10. It's snug but not super snug, like it's not skintight.
11. For some reason there is a cutout for the backplate nail groove
is there a non-argyle version?
Looks like a white-label Amzer case:
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88260.htm
How does the product you have compare to the looks of that one?? Pretty much the same? I have been debating over one of these cases for a while now. Tried a lot of them out so far and havent found "the one"
i just dont want something that adds too much bulk! lol if i wasnt affraid of destroying the phone i would just let it go naked, but thats just too risky.
frettfreak said:
How does the product you have compare to the looks of that one?? Pretty much the same?
Click to expand...
Click to collapse
Well it doesn't say amzer anywhere on it or the packaging, and the amzer picture is a little different. There is one big cutout for the flash leds, camera, and speaker on the back. However the amzer picture might just be a photoshop mockup, and perhaps they are in fact the same.
If you want some protection without bulk and inconvenience, I recommend this case. It isn't quite as protective as the thicker silicon cases in terms of shock absorption, but it will protect against scratches and abrasions without sticking to your pocket or attracting lint.
I wasn't able to find one without the argyle print, but like I said, it's pretty subtle. If you wait, you can get one of the case-mate ones which I'm sure are higher quality.
just noticed the epik cases are out on ebay, only like 3.49 with free shipping! looks like it has individual cutouts for the led flash, camera, and speakerphone. i had to get one at that price, smoky black no pattern:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=300440215923
Just received my Epik case --
Now I have 3 different cases:
1. Sprint retail OEM silicone skin
2. Smoke argyle pattern TPU skin
3. (new) Black Epik TPU skin
Here are my impressions of the Epik TPU:
* The skin is thicker, softer, and tackier than the argyle skin, but less thick, soft and tacky than the silicone skin. I'd say it's right in the middle on all 3 accounts.
* The thickness fully recesses the camera lens
* Easy to get in/out of the pocket, doesn't attract dust/lint
* The color is not really black but more of a dark smoke color
* There are 3 individual cutouts for the components on the back
* There is no silly cutout for the battery cover nail groove
* The skin extends in over the bezel further than the argyle TPU, covering the screen seams
* The mic cutout is smaller than the argyle's
* The power and volume buttons stand out further than the argyle's, making them easier to find by touch
I definitely prefer this skin to the others. IMO, it provides the best tradeoff in terms of protection, looks and bulk.
catpunt said:
Just received my Epik case --
Now I have 3 different cases:
1. Sprint retail OEM silicone skin
2. Smoke argyle pattern TPU skin
3. (new) Black Epik TPU skin
Here are my impressions of the Epik TPU:
* The skin is thicker, softer, and tackier than the argyle skin, but less thick, soft and tacky than the silicone skin. I'd say it's right in the middle on all 3 accounts.
* The thickness fully recesses the camera lens
* Easy to get in/out of the pocket, doesn't attract dust/lint
* The color is not really black but more of a dark smoke color
* There are 3 individual cutouts for the components on the back
* There is no silly cutout for the battery cover nail groove
* The skin extends in over the bezel further than the argyle TPU, covering the screen seams
* The mic cutout is smaller than the argyle's
* The power and volume buttons stand out further than the argyle's, making them easier to find by touch
I definitely prefer this skin to the others. IMO, it provides the best tradeoff in terms of protection, looks and bulk.
Click to expand...
Click to collapse
Bought the argyle verison skin on ebay...then the non patterned ones. Been an epik case lover for ages...Well I tell you the ebay non patterned skins and the epik cases come in the same packaging. Note the original epik cases didnt come in retail packaging. When I emailed the seller he confirmed that they could sold by other ebay sellers too....hmmmm
frettfreak said:
Looks like a white-label Amzer case:
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88260.htm
How does the product you have compare to the looks of that one?? Pretty much the same? I have been debating over one of these cases for a while now. Tried a lot of them out so far and havent found "the one"
i just dont want something that adds too much bulk! lol if i wasnt affraid of destroying the phone i would just let it go naked, but thats just too risky.
Click to expand...
Click to collapse
I feel the same about the bulk. I like what people have been doing for the iPhone and skinning it which leaves it thin and adds a small layer of protection to it. I think the EVO could benefit from the same. (just my personal thoughts on the matter).
catpunt said:
Just received my Epik case --
Now I have 3 different cases:
1. Sprint retail OEM silicone skin
2. Smoke argyle pattern TPU skin
3. (new) Black Epik TPU skin
Here are my impressions of the Epik TPU:
* The skin is thicker, softer, and tackier than the argyle skin, but less thick, soft and tacky than the silicone skin. I'd say it's right in the middle on all 3 accounts.
* The thickness fully recesses the camera lens
* Easy to get in/out of the pocket, doesn't attract dust/lint
* The color is not really black but more of a dark smoke color
* There are 3 individual cutouts for the components on the back
* There is no silly cutout for the battery cover nail groove
* The skin extends in over the bezel further than the argyle TPU, covering the screen seams
* The mic cutout is smaller than the argyle's
* The power and volume buttons stand out further than the argyle's, making them easier to find by touch
I definitely prefer this skin to the others. IMO, it provides the best tradeoff in terms of protection, looks and bulk.
Click to expand...
Click to collapse
I just got that same Argyle case in the mail today and have the Epik one on order as well. The Argyle looks pretty nice, but the lip that extends past the screen is bugging me some. I guess I will get use to it. Does the Epik have the same lip or is it more flattened out?
catpunt said:
Just received my Epik case --
Now I have 3 different cases:
1. Sprint retail OEM silicone skin
2. Smoke argyle pattern TPU skin
3. (new) Black Epik TPU skin
Here are my impressions of the Epik TPU:
* The skin is thicker, softer, and tackier than the argyle skin, but less thick, soft and tacky than the silicone skin. I'd say it's right in the middle on all 3 accounts.
* The thickness fully recesses the camera lens
* Easy to get in/out of the pocket, doesn't attract dust/lint
* The color is not really black but more of a dark smoke color
* There are 3 individual cutouts for the components on the back
* There is no silly cutout for the battery cover nail groove
* The skin extends in over the bezel further than the argyle TPU, covering the screen seams
* The mic cutout is smaller than the argyle's
* The power and volume buttons stand out further than the argyle's, making them easier to find by touch
I definitely prefer this skin to the others. IMO, it provides the best tradeoff in terms of protection, looks and bulk.
Click to expand...
Click to collapse
pretty interested in this case, any chance you could post any pics of it since they dont have any in the ebay listing?
catpunt said:
Well it doesn't say amzer anywhere on it or the packaging, and the amzer picture is a little different. There is one big cutout for the flash leds, camera, and speaker on the back. However the amzer picture might just be a photoshop mockup, and perhaps they are in fact the same.
Click to expand...
Click to collapse
Just for the record, it does seem like a photosphop mockup (coloring wise) but the shape of the cutouts on the Amzer page is accurate. I got the Amzer Argyle skin off Amazon, took FOREVER to ship and then like 2-3 weeks to get here once it shipped but I'm pretty pleased with it. I'm pretty darn sure that the Amzer Argyle skins and the Epik TPU cases (along w/a couple other plain TPU cases on Ebay) share the same mold, based on the comparison/description that catpunt posted above.
My Amzer skin also recesses the lens (just enough to protect it) and also extends just past the screen seams. Anyway, I'll be able to confirm just how close the two skins are (Amzer/Epik) in a few days, I ordered a couple of Epik ones as well from DCMugen on Ebay. $7.50 for a red and a black + a screen protector and a cleaning wipe, why the heck not?
I ordered the Epik one even tho I already have the Amzer one for two reasons... Number one, I want to see how they look w/a clear battery door, showing off the phone's red internals thru the case. I can do that w/Amzer's but it might look too busy, even tho I actually don't mind the Argyle pattern. It's VERY subdued and nowhere near as prominent as it is on Amzer's site. I'll post some comparison pics once I've got all three cases in my hands.
The other reason I ordered the Epik one in red and black is the coloring or tint on the Amzer one... On the back it seems pretty black/grey, as you'd expect, but around the side edges it's a bit off... Has a bit of a brown tint to it, maybe a mix of amber and black. It doesn't look bad, just a tiny bit off. The Epik case looks to be a truer shade of smoke black all around (and the red looks pretty close to the EVO's red details). I think Amzer's oddity might be a function of the Argyle pattern, it's sort of etched on the inside. It might affect the coloring somehow.
In the end, these are all probably coming from the same source, except for the Argyle batches on Ebay w/those odd cutouts, the large single cutout for LED/camera/speaker and that weird one for the fingernail hole on the battery lid. Like I said, I'll post pics when I get my Amzer ones. I'm surprised that there's like no pics whatsoever out there of how the red one looks ON the phone.
In summary, Amzer Argyle != Ebay Argyle, Amzer's skin seems to be higher quality, definitely sourced from a different place. Amzer's colors are way off on their pics tho, the colors are closer to what the other Argyle skins look like, tho there seems to be some variation on the black/smoked one.
Overall I'm loving these TPU skin/cases tho... They blow the silicon ones out of the water. My silicon case didn't catch the inside of my pockets that much, but enough to be a bother, these slip out super easy but they've still got very good grip on your hand (perhaps better than silicon even). They also don't attract dust/lint AT ALL, my silicon case would develop this crusty line of crap along the screen edges within just a day of cleaning it, was pretty irritating.
Finally, as others have said, they feel way more svelte on your hand than the HTC/OEM silicon case... I don't know if it's the way the corners are rounded off or what, but it's a big difference in feel (altho probably not a huge difference in reality, they're thinner but not THAT much thinner). Oh and they're much more rigid/tight around the phone, the edges around the screen don't flop out, AT ALL... On silicon cases after a few weeks (or even when they're brand new) you can stretch 'em pretty easily by just flicking at it or if your thumb slips off screen... Not so with these.
TPU >>>>>>>>>>> silicon
You guys are aware that there is a person on this board selling TPU cases right?
http://forum.xda-developers.com/showthread.php?t=719527
And they are nice, got 4 of them for 19 dollars, shipping included.
Quick bit of take to make the button mashing easier and they are perfect.
catpunt said:
just noticed the epik cases are out on ebay, only like 3.49 with free shipping! looks like it has individual cutouts for the led flash, camera, and speakerphone. i had to get one at that price, smoky black no pattern:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=300440215923
Click to expand...
Click to collapse
I bought an Epik. Hate it. So far the best TPU case I've found is the one in the "Evo TPU Cases available" thread. It's clear, and the back is a matte finish. The Epik is super thick and bows out on the sides.
Saw this over on the Case-Mate site:
https://www.case-mate.com/HTC-EVO-4G-Cases/Case-Mate-HTC-EVO-4G-Gelli-Cases.asp
I have the dark smoke Epik TPU case, but ordered the Tomato one for a splash of color.
Are they the rubbery feel that makes it hard to take out of a front jean pocket?
Let us know how this case is compare to the TPU case. I like tight fitting aspect of the TPU case but hate how the side/power button is too hard to press.
These ARE tpu
If you look carefully (also states in the description) there is a pattern on these. Sigh. It is triangles. I don't care for the pattern personally. I just did not want to see someone buy one without noticing this first.
I got mine yesterday and like it alot. It's much more refined and better looking than the Epik case. There are no rough edges or bulge near the volume rocker like on the Epik case, and the finish has a translucent quality to it. The case is also slightly thinner than the Epik case and feels much better in the hand.
At first I was going to return the case because it appears that the camera lens is almost flush with the edge of the case, so I thought there was inadequate protection for the camera. However, I noticed that when you place the case on a flat surface, the back is actually tapered so that the bottom half of the phone is level with the surface, but raises up slightly towards the camera lens. There is a good 1-2 millimeter clearance between the surface and the camera lens. The phone is completely level though and you can't tell unless you are looking at it sideways. Quite brilliant!
The only downsides are the volume buttons are harder to hit than on the Epik case, and the glossy skin is a little bit more slippery than the Epik case. The Epik feels more "grippy". It also came with a screen protector which is about average at best. Anyways, feel free if you have any questions.
Oh and the pattern is actually circles, not triangles.
I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1
If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.
I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.
bought two of them from Dealextreme, but in black color, best TPU
Do they make them in matte black?
I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.
bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23
The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....
I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.
I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559
i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1
Got both. In my book, Poetic is the winner.
1. Better protection all around, especially around the power and volume buttons. As a plus, the cover between the power and volume buttons also helps my finger feels and distinguishes the buttons - just like the tiny raises on the 'F' and 'J' of the keyboard help us touch typists. With the Moko, I sometimes press the wrong button.
Top and bottom coverage is slightly better on the Poetic.
2. Better magnetic closure. On the Poetic, the metal is embedded in the flap cover, as opposed to the exposed chrome on the Moko which might actually scratch unprotected screen (unlikely but possible). The Poetic also has more magnet, so it should hold the flap cover better though I haven't run into any situation where the Moko flap cover opened unintentionally.
3. Better tri-fold stand. The embedded metal along the edge of the Poetic cover holds it in place when folded the natural way (toward the outside). With the Moko, I have to fold the flap the other way (unintuitively toward the inside) so that the magnet would keep the cover from unfolding and sliding.
4. The Nexus 'clicks' into place better with the Poetic than with Moko.
Cons:
1. The Poetic logo is shiny and looks cheesy on the light blue case. I wished it was more low key and sophisticated looking, or put it in the back instead of the front. On the other hand, the chrome metal on the Moko is cheesy too. It's subjective - and some might actually love it.
2. Moko has more color options.
Neutral:
1. Build quality is comparable. I can't see any discernible differences, but only time will tell how well they hold up.
Poetic has 3 year warranty!
I am also receiving another improved version for FREE.
I didn't trust a $10 case coming directly from China (Poetic), but I was VERY impressed with how solid and cleanly the case wrapped around my Nexus. Absolutely amazing case for the price.
Absolutely agree with you on the cheesy Poetic logo on the front... I've realized over time that I don't even really notice it anymore, and even if I did, it's a small sacrifice to make for such a rock solid case. I'm definitely a fan of Poetic now.
I first had the Seidio Surface case with kickstand and while I liked the case the kickstand was worthless in portrait mode, it was also a bit slippery to hold. Next I bought the SupCase and it does provide more protection than the Surface without adding too much bulk. The edges were a bit sharp but had started to wear down and the case provides more grip then the Surface & has a dimple. A downfall of this case is trying to type while the phone is on a desk/table as it slides around.
So I recently purchased the PureGear GripTek case in green. This case is not bulky but provides great grip due to the multitude of grooves in the sides and back of the case. The lip around the screen protects it if placed face down but thin enough that it doesn't interfere with swiping. The buttons have a good feeling to them and the bumpers on the corners will provide more impact protection without being obtrusive. The case slides very easily in/out of my pocket as well. Overall it's hands down the best case I've owned or seen. I plan on taking a Dremel with a round stone and carefully making a small dimple myself in the case, shouldn't be very hard to do and will make the grip even better.
I do wish that PureGear offered more color choices, I would like to see a darker blue & red along with other options. I bought the case from www.WirelessGround.com for $14 shipped with an online free shipping coupon.
http://www.pure-gear.com/griptek-impact-protection-for-motorola-moto-x.html
I kinda like this. Is it pretty much a TPU case with softer/more rubbery corners?
tallgrasshawk said:
I kinda like this. Is it pretty much a TPU case with softer/more rubbery corners?
Click to expand...
Click to collapse
Yes, the main material is not as gummy as Cruzerlite TPU cases I have had but it still flexible and easy to install. The added grip of the case is a big benefit with this case, I think I'm going to get a black one also.