Hello Everyone!
I built a costume firmware and I want to test it, but I have WAVE II and the firmware based on S8500DXLD1.
Is there anyway to run it on pc?
No
No it isn't...
Make a backup of your files...
try to flash your firmware and then restore your files...
Taxidriver05 said:
No it isn't...
Make a backup of your files...
try to flash your firmware and then restore your files...
Click to expand...
Click to collapse
I can't, because I have Wave II and the fiemware baced on S8500's firmware
shaiws said:
I can't, because I have Wave II and the fiemware baced on S8500's firmware
Click to expand...
Click to collapse
So request someone to do it. There is no alternative but to test.
Could you upload the files of the firmware? Then i could have a look on it. I am also on a LD1-version of my cfw.
written on my Samsung GT-S8530 with badaBoard!
Related
Hi, is there a 4.2.2 update (official or unofficial) the Rogers model sgh-i467m?
Is it possible to flash gt-5120 roms on sgh-i467m without losing LTE or text messaging.. or bricking?
I'm pretty new at this... if it's possible, a little step by step would be really appreciated.
Thanks!
dsp0704 said:
Hi, is there a 4.2.2 update (official or unofficial) the Rogers model sgh-i467m?
Is it possible to flash gt-5120 roms on sgh-i467m without losing LTE or text messaging.. or bricking?
I'm pretty new at this... if it's possible, a little step by step would be really appreciated.
Thanks!
Click to expand...
Click to collapse
it is possible but not as is. you have to port it and it is very easy. I have been using it for some time, I would post it but i just dont have patient to upload 1 GB.
a1jatt said:
it is possible but not as is. you have to port it and it is very easy. I have been using it for some time, I would post it but i just dont have patient to upload 1 GB.
Click to expand...
Click to collapse
Thanks, that is good to know. Sorry for being newb but can you explain how to port it? And do you still have LTE with this rom you ported?
dsp0704 said:
Thanks, that is good to know. Sorry for being newb but can you explain how to port it? And do you still have LTE with this rom you ported?
Click to expand...
Click to collapse
google android rom porting. you will have to extract ram disk from boot.img and device specific files from i467 rom and then mix those will 4.2.2 n5120 files and build the rom.
4.2.2
a1jatt said:
4.2.2
Click to expand...
Click to collapse
Can you at least please send us the boot.img if u don't wanna share the rom ?
thanks
Edit: thanks I don't need it I made it to work withoit modifiying the boot.img or anything just via odin
Yorgo1982 said:
Can you at least please send us the boot.img if u don't wanna share the rom ?
thanks
Edit: thanks I don't need it I made it to work withoit modifiying the boot.img or anything just via odin
Click to expand...
Click to collapse
Could you help me with mine? I'm so lost
Yorgo1982 said:
Can you at least please send us the boot.img if u don't wanna share the rom ?
thanks
Edit: thanks I don't need it I made it to work withoit modifiying the boot.img or anything just via odin
Click to expand...
Click to collapse
Odin doesn't let me flash anything from n5120, I wonder if you have a different boot loader than I have.
a1jatt said:
Odin doesn't let me flash anything from n5120, I wonder if you have a different boot loader than I have.
Click to expand...
Click to collapse
ur phone is i467 or i467m what I see its a m
Yorgo1982 said:
ur phone is i467 or i467m what I see its a m
Click to expand...
Click to collapse
I467M
a1jatt said:
I467M
Click to expand...
Click to collapse
so we have the same boot loader. flash my rom you will be able to do it
Yorgo1982 said:
so we have the same boot loader. flash my rom you will be able to do it
Click to expand...
Click to collapse
Where do I find this 4.2.2 ROM that works with the Canadian i467M
i have install ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 on Galaxy Ace 2.
After install rom, mobile network not working.
Please help me
sorry for my bad English
dhenys said:
i have install ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 on Galaxy Ace 2.
After install rom, mobile network not working.
Please help me
sorry for my bad English
Click to expand...
Click to collapse
Which ace 2 varient you have? If P or L remember to replace the tee folder
Sent from my GT-I8160 using Tapatalk
Yes, this always happens when you use a custom ROM which is not on your variant, replace the tee folder on system/lib.
You can download it from YouTube, I watched a video with a mediafire link with this folder.
Mord Fustang said:
Yes, this always happens when you use a custom ROM which is not on your variant, replace the tee folder on system/lib.
You can download it from YouTube, I watched a video with a mediafire link with this folder.
Click to expand...
Click to collapse
Thanks. I'll try
if your come from GB flash last JB stock first, (www.sammobile.com/firwares), Root and install CWM, full wipe, (i always do system format too), and install your desire Rom.
Edray said:
if your come from GB flash last JB stock first, (www.sammobile.com/firwares), Root and install CWM, full wipe, (i always do system format too), and install your desire Rom.
Click to expand...
Click to collapse
This has to do with 'tee' folder. And jb version doesnt matter
Sent from my GT-I8160 using Tapatalk
On my I8160, same problem.
After I flash CyanogenMod 11.0 (By New Maclaw) into my I8160, only mobile networking doesn't work!
My I8160 is running the original Andrpoid 2.3.6 (baseband version: I8160DXLF2, kernel version: 2.6.35.7-I8160XXLD8-CL11100997)
dhenys said:
i have install ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 on Galaxy Ace 2.
After install rom, mobile network not working.
Please help me
sorry for my bad English
Click to expand...
Click to collapse
qianw said:
On my I8160, same problem.
After I flash CyanogenMod 11.0 (By New Maclaw) into my I8160, only mobile networking doesn't work!
My I8160 is running the original Andrpoid 2.3.6 (baseband version: I8160DXLF2, kernel version: 2.6.35.7-I8160XXLD8-CL11100997)
Click to expand...
Click to collapse
......
flash jb first then cm11
which jb firmware can be used? please recommend a firmware for me.
thanks.
teddytsen said:
......
flash jb first then cm11
Click to expand...
Click to collapse
qianw said:
which jb firmware can be used? please recommend a firmware for me.
thanks.
Click to expand...
Click to collapse
any(for your varient)
From http://live.samsung-updates.com/index.php?device=GT-I8160 , I can't find android 4.1.2 firmware for my I8160.
Could you confirm that any android 4.1.2 firmware can be used?
thanks.
PDA: I8160DXLF2
PHONE: I8160DXLF2
CSC: I8160LBLF2
teddytsen said:
any(for your varient)
Click to expand...
Click to collapse
qianw said:
From http://live.samsung-updates.com/index.php?device=GT-I8160 , I can't find android 4.1.2 firmware for my I8160.
Could you confirm that any android 4.1.2 firmware can be used?
thanks.
PDA: I8160DXLF2
PHONE: I8160DXLF2
CSC: I8160LBLF2
Click to expand...
Click to collapse
what are you finding??? firmware code??
I could not find a zip file whose PDA is same as my I8160's PDA code.
So I don't know which one can be used for My I8160.
teddytsen said:
what are you finding??? firmware code??
Click to expand...
Click to collapse
qianw said:
I could not find a zip file whose PDA is same as my I8160's PDA code.
So I don't know which one can be used for My I8160.
Click to expand...
Click to collapse
i just said, the firmware codes are different so theres no point matching em. ind any fw
Sorry for my misunderstanding.
After I flash any android 4.1.2 firmware into my I8160 using ODIN, if it bricks my I8160, then how to do?
teddytsen said:
i just said, the firmware codes are different so theres no point matching em. ind any fw
Click to expand...
Click to collapse
qianw said:
Sorry for my misunderstanding.
After I flash any android 4.1.2 firmware into my I8160 using ODIN, if it bricks my I8160, then how to do?
Click to expand...
Click to collapse
it wont(unless you use wrong varient fw)
sir, the problem is i could not find a correct variant fw for my I8160. :crying:
teddytsen said:
it wont(unless you use wrong varient fw)
Click to expand...
Click to collapse
qianw said:
sir, the problem is i could not find a correct variant fw for my I8160. :crying:
Click to expand...
Click to collapse
...
If yours in I8160 find one that belongs there. Dont find the P or L varient fws
Theres a fw thread in general forum
Sent from my GT-I8160 using Tapatalk
Hi,
I have a very similar problem as described above: I don't get any network connection on my I8160P.
I flashed from Gingerbread to CM 10.2 (cm-10.2-20140228-UNOFFICIAL-codinap) and now I can't get any any mobile network connection. Phone says no service.
I read the suggestions in this thread but not really sure if I get them right as I'm totally new to this.
Some people here talk about deleting/editing the tee folder. Could this solve my problem? How to do that?
Others say that I need to to update a Samsung version first before flashing to CM 10.2. Again same questions: Could this solve my problem? How to do that?
Let me me know if you need further details.
Hope you can help me!
SGA2 problem
Hey guys
can someone helpme to fix problem in my GA2,
cannot access to the internet (cannot display HDSPA&EDGE signal)
im frusrtated for this problem, help me :crying:
Hey folks, just wanted to know is there a way to downgrade from 4.4.2 to 4.2.2?
I don't care about triggering the knox counter whatsoever.
Is it possible by rooting maybe?
Thanks.
Oxbob said:
Hey folks, just wanted to know is there a way to downgrade from 4.4.2 to 4.2.2?
I don't care about triggering the knox counter whatsoever.
Is it possible by rooting maybe?
Thanks.
Click to expand...
Click to collapse
Try this way http://forum.xda-developers.com/showpost.php?p=53752825&postcount=620
N0Ntoxic said:
Try this way http://forum.xda-developers.com/showpost.php?p=53752825&postcount=620
Click to expand...
Click to collapse
It totally worked, thanks man.:good:
N0Ntoxic said:
Try this way http://forum.xda-developers.com/showpost.php?p=53752825&postcount=620
Click to expand...
Click to collapse
good tip thanks
hi.
I managed to downgrade 4.4.2TCL with knox 2.0 to 4.2.2.
was simple SamMobile I went to download the "ZTO-4.2.2-I9195UBUBNE2 Brazil" so Caribe; worked with this. Then just put in odin mode and 4.2.2 again.
Sorry my english
Cool, it worked for me aswell for m'y broken N4
hi there!
is it posible to perform this downgrade from 4.4.2 to 4.2.2 in a i9190 device? Because I think the link to the solution is for the i9195 model only.
No its not. You will brick your device.
ok. So I'll have to wait until samsung releases 4.4.2 for my device and that would be in .......3....2....1........3/4..............1/2......................
nixiepro said:
hi there!
is it posible to perform this downgrade from 4.4.2 to 4.2.2 in a i9190 device? Because I think the link to the solution is for the i9195 model only.
Click to expand...
Click to collapse
N0Ntoxic said:
No its not. You will brick your device.
Click to expand...
Click to collapse
And in a i9192?
Oxbob said:
It totally worked, thanks man.:good:
Click to expand...
Click to collapse
I olso have a Samsung s4 mini i9195 with 4.4.2 and i want tio downgrade it can u tell me/write me step by step what to do?I just neade ODIN the firmware,coonect the handy start Odin and launch the application?Iì'm realy afraid to brick it or make something wrong.After if I want to go back to 4.4.2 I must upgraade only with ODIN and only with brasilian firmware?Or by handy i can upgrade or no?
Thank's
Helen
For the german folks out there...
I managed to downgrade from stock KK 4.4.2 Firmware to JB 4.2.2 by using this Rom:
s4miniarchive.com/2014/04/deodexed-and-rooted-stock-for-galaxy-s4-mini.html
Installation via CWM...
Can someone explain to me why it did work?
I succesfuly downgraded my i9190. But I can not turn on wifi. I dont want use custom kernel. Is there another solution?
Thanks for this helpful post.
Help
umuturunc said:
I succesfuly downgraded my i9190. But I can not turn on wifi. I dont want use custom kernel. Is there another solution?
Thanks for this helpful post.
Click to expand...
Click to collapse
What method used to Downgrade I9190 ?
If the radio does not work you can download a ROM SamMobile that is their region.
Ragdeana said:
What method used to Downgrade I9190 ?
If the radio does not work you can download a ROM SamMobile that is their region.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2549357
İs there anyone know how to install P601 5.1.1 Rom to P602 via ODIN?
this should work...
savarona said:
İs there anyone know how to install P601 5.1.1 Rom to P602 via ODIN?
Click to expand...
Click to collapse
Download 5.1.1 firmware for P601
open it by winrar...
then open .tar.md5 file by winrar too.
then extract all files... (such as boot.img.. recovery.img.. and etc) all of them.
then read this page:( the Tutorial of creating your own flashable rom that can be supported by odin)
http://www.rwilco12.com/forum/showthread.php?tid=92
savarona said:
İs there anyone know how to install P601 5.1.1 Rom to P602 via ODIN?
Click to expand...
Click to collapse
Hello. I dont change p602 rom. Pls say me how ı do this?
mohamadreza33 said:
this should work...
Download 5.1.1 firmware for P601
open it by winrar...
then open .tar.md5 file by winrar too.
then extract all files... (such as boot.img.. recovery.img.. and etc) all of them.
then read this page:( the Tutorial of creating your own flashable rom that can be supported by odin)
http://www.rwilco12.com/forum/showthread.php?tid=92
Click to expand...
Click to collapse
hello can you help me for this?
good morning. i have lightrom last release in galaxy s9 phone. i must return back to stock rom and i need help for do this and for software i need. Please help me, i must sell my phone with stock rom. thanks
myabc said:
good morning. i have lightrom last release in galaxy s9 phone. i must return back to stock rom and i need help for do this and for software i need. Please help me, i must sell my phone with stock rom. thanks
Click to expand...
Click to collapse
i assume the model is the G960F, correct? and if it is the F model, what country are you wanting it to be for?
youdoofus said:
i assume the model is the G960F, correct? and if it is the F model, what country are you wanting it to be for?
Click to expand...
Click to collapse
thanks gentlema. yes. it is g960f and from lightrom (i have twrp) i need help for return to stock original itv rom i need even apps... i hope your help. thanks
myabc said:
thanks gentlema. yes. it is g960f and from lightrom (i have twrp) i need help for return to stock original itv rom i need even apps... i hope your help. thanks
Click to expand...
Click to collapse
here
flash this in Odin
https://www.sammobile.com/samsung/galaxy-s9/firmware/SM-G960F/TIM/download/G960FXXU6CSGD/288804/
youdoofus said:
here
flash this in Odin
https://www.sammobile.com/samsung/galaxy-s9/firmware/SM-G960F/TIM/download/G960FXXU6CSGD/288804/
Click to expand...
Click to collapse
thanks. i am not able to download because i am already registered and for download it says that have to upgrade to pro, even if i never downloaded anything. please is there another way to download? thanks
myabc said:
thanks. i am not able to download because i am already registered and for download it says that have to upgrade to pro, even if i never downloaded anything. please is there another way to download? thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
https://forum.xda-developers.com/galaxy-s9/how-to/tool-frija-samsung-firmware-downloader-t3910584
both of those tools will download the firmware and are 100% trusted programs. They will ask you for information for the phone, CSC and PDA. On sammobile, there isnt anything labeled "phone", but its the same alphanumeric as the PDA