Related
After praising the tp2 for nearly two weeks now I have decided I will return it to MPD.
I paid 457 for this phone and I will except nothing less than 100 percent perfection in terms of build quality.
After 2 weeks use I have to following problems:
- The sceen travel before it hits the lcd in the centre of the screen had increased rapidly and I can now notice a significant change between sensitivity at the edges and the centre (about 1-2mm).
- The sliding mechanism has got easier which is good, but the movement of the screen is about 7mm when at full tilt, where as it was minimal at best when I received it.
Im not writing this as a sob story; I have a genuine worry that these could be very common problems and yet im unsure at the chances of returniing it for a replacement - hoping it wont have the same problems
Mine went back I had it one day, They called me when they received it and then acitoned a refund. The Touch Pro 2 is a terrible built device for something that cost's half a grand.
I have gone back to the Touch HD but really miss the keyboard oh well at least my device isn't going to fall apart. My partners device was perfect and now after a month of use it is now wobblying when you touch the screen and slider is so loose.
sorry you need to mail the webshop and wait for your reply sometimes they reply quick other days they take a while to reply. It will get worse get it replaced or refunded is my advice.
had two deviced now and sent both back. i cross my fingers the third onw will be without any isues. think MANY bad manufactured devices are out there
on my 4th so far and not 100% happy, wobble in the screen when tilted. Very bad design from HTC, poor build quality.
wobble in the screen would not be such a big problem for me i never tilit the screen. hope ill get a device with no other problems next time.
i cant understand why they built this useless tilt feature into the slider the slider could be much more "robust" without this tilit mechanism.
Say it ain't so....
How common are these screen issues that you guys are mentioning, the wobble and such? These issues that you folks are bringing up are starting to worry me, and what worries me even more is that some of you went through 3 or 4 of the TP2s already, leading me to believe that these problems are more widespread than I'd like. I've been anticipating this phone's arrival since February and I really hope that these issues aren't so common that it turns the TP2 into a total let-down instead of the great device that all this hype is leading me to believe. If at all possible could you guys please post updates on your situations?
thanks, and I hope all works out well for you guys.
What do you mean by a wobble? Is the screen itself deformed or are the letters/pictures deformed on the display?
Maybe you can post a picture or something?
I hardly ever use the Tilt feature. When I first heard about it I thought it was brilliant, still looks cool, but it isn't comfortable to work with ...
the wobble issue is discussed in this thread:
http://forum.xda-developers.com/showthread.php?t=524641
some people are worried about the screen wobbles a little bit when its tilt like in this video:
http://www.youtube.com/watch?v=I6A5v-DR1A8
i think this is ok if it is not too much.
BUT i had two devices with a problem similar to this video and thats absolute not ok for me:
http://www.youtube.com/watch?v=BObBGt40hYg
the screen wobble isnt such a big problem for me, it makes it easier to slide out flat.
my problem is with the flex on the touchscreen. it feels like you push down on one plastic layer which then hits the lcd behind, making it less sensitive in the centre than the edges where i dont have this problem.
i think there is nothing to do. this is the "touch" in touch screen. it has to be little bit flexible to react to your input. dont compare it to the iphone thats a nother technique.
or do you mean something else?
Hi lhwparis
real glad you posted those videos of the wobble. I was beginning to think it was something quite serious, but i see that kind of bounce in most tiltable systems. So not so worried now.
Has anyone done a poll yet of how many people have a phone that does this? strange that its not the same with everyones.
what do you mean with "bounce"? video 1 or the beginning of video 2.
i think the wobble when screen is tilt is normal on most phones (only some without wobble) and thats not a great problem. the second video with the gap between the display and the phone in closed position is a realy great problem for me.
yes i did watch both, i guess im refrerring to the wobble, whilst its open.
perhaps the bounce whilst its closed is not so normal, although again im not sure how much of gap would be a source of concern.
I've got to be honest here. I am one of the fussiest people in the world when it comes to gadgets, but I think there is a lot of over-reaction about the "wobble" issue. The mechanism which allows the screen to tilt will have some "play" in it - otherwise you'd never be able to slide the keyboard out. The same "play" is what means that there is a gap between keyboard and screen - and this will be larger on the side nearest the power button, and it will give a little when you push on this side of the device, as the two halves are held together by the hinge at the opposite edge. It's unavoidable - even if your device doesn't do this from new, I can pretty much guarantee that it will do so within a few weeks. If the hinge is actually loose - so the screen doesn't stay put where you leave it, or if the slider mechanism works without you wanting it to, then you have a problem - but small gaps and small amounts of play in the mechanism are not only normal; they are what prevents damage from operating the mechanism.
"Give" near the centre of a large touchscreen is also pretty common - it's difficult to get the touchscreen to lay perfectly flat, as it is only secured at the edges. Again, there will be a degree of variation between samples, but this is another thing that will change with time. It also quite often varies with air pressure - if you take any touchscreen device (other than the iPhone, which uses a different principle) up in an aircraft, the touchscreen will frequently bulge out more from the screen due to the reduced ambient pressure and the small amount of air trapped under the touchscreen.
I really think that some of you are getting a little too over-stressed about this - 99% of these devices are fine. Leaving aside anything else, these will all have been tested in the factory, and mechanical function of the screen hinges and touchscreen will have been tested on every device before it was packed.
still, its disturbing to hear how many people are getting differences in their build quality. perhaps this is why tmobile uk are not going to be launching the device?
lhwparis said:
i think there is nothing to do. this is the "touch" in touch screen. it has to be little bit flexible to react to your input. dont compare it to the iphone thats a nother technique.
or do you mean something else?
Click to expand...
Click to collapse
The flexibility in the hinge is nothing to do with the resistiveness of the screen. Regardless of the screen, there should not be this amount of flex in the hinge.
what a load a rubbish.............if any of you fusspots owned a tytn 2 you probably would have nightmares. too much fussing over a wobble which is manditory to avoid sudden harsh impacts and decrease tension on the ribbon that goes from the board to the screen. the screen when tiltled was not actually done so we can sit there wobbling it. in fact no one actually needs to wobble the phone. the phone is sturdy when in full tilt then it works. imagine people actually sitting there wobbling the thing. what do you think will happen? it will loosen...........the wobble is not a feature of the phone but for safety and longevity of the moving parts of the phone. if you don't like the phone then don't buy it. if the screen had no wobble i'd be reading whole new thread of how it should. obviously this phone willl not please everyone and so those moaning about wobble should not buy the phone! obviously there will be some faulty handsets but needing 4 handsets should tell you that maybe it ain't the phone but actually you with the issue. it amazes me how people always find one thing negative to focus on but forget all and i mean all the positive aspects of this phone. what wobble?????????? touch HD which i do own has nothing on tp2 so thats a backward step! this is a phone not a tennis racket
no you are right, but the gap has got bigger in the middle since when i first got it, and comparing it to my friends HD the gap is far greater. There is barely any travel when it comes to the edges, and I see no difference of why this couldnt be the same for the centre.
shure2 said:
what a load a rubbish.............if any of you fusspots owned a tytn 2 you probably would have nightmares. too much fussing over a wobble which is manditory to avoid sudden harsh impacts and decrease tension on the ribbon that goes from the board to the screen. the screen when tiltled was not actually done so we can sit there wobbling it. in fact no one actually needs to wobble the phone. the phone is sturdy when in full tilt then it works. imagine people actually sitting there wobbling the thing. what do you think will happen? it will loosen...........the wobble is not a feature of the phone but for safety and longevity of the moving parts of the phone. if you don't like the phone then don't buy it. if the screen had no wobble i'd be reading whole new thread of how it should. obviously this phone willl not please everyone and so those moaning about wobble should not buy the phone! obviously there will be some faulty handsets but needing 4 handsets should tell you that maybe it ain't the phone but actually you with the issue. it amazes me how people always find one thing negative to focus on but forget all and i mean all the positive aspects of this phone. what wobble?????????? touch HD which i do own has nothing on tp2 so thats a backward step! this is a phone not a tennis racket.
Click to expand...
Click to collapse
i said that wobble is normal in all posts before but i sent back my two devices because of the issue shown in this video (at the beginning):
http://www.youtube.com/watch?v=BObBGt40hYg
so you want to tell me its normal that i can lift of the screen more than 5mm in closed position?
my friend has a TP2 too and he cant lift of the screen from device and there is nearly no gap!
shure2 said:
After praising the tp2 for nearly two weeks now I have decided I will return it to MPD.
I paid 457 for this phone and I will except nothing less than 100 percent perfection in terms of build quality.
After 2 weeks use I have to following problems:
- The sceen travel before it hits the lcd in the centre of the screen had increased rapidly and I can now notice a significant change between sensitivity at the edges and the centre (about 1-2mm).
- The sliding mechanism has got easier which is good, but the movement of the screen is about 7mm when at full tilt, where as it was minimal at best when I received it.
Im not writing this as a sob story; I have a genuine worry that these could be very common problems and yet im unsure at the chances of returniing it for a replacement - hoping it wont have the same problems
Click to expand...
Click to collapse
Good luck..
The screen went really weird on mine, colours all messed up so on. Emailed mpd, which of course they didn't answer in a timely fashion so I phoned them to which they refused to help me over the phone and told me to email.
Half a day later I get a reply refusing to take it back as I've had it for over seven days and to send it to Regeneris or whoever they're called so I did that. The idiots at MPD failed to realise Regeneris wont' repair these phones, and then forward it on to HTC .. which of course it bizarrely taken them three days to do so.
Apparently now HTC have had it a week, and I've been bugged Regeneris every day, and the answer is the same .. "We've not heard anything, but I'll email them again" Either they've not emailed them as promised or HTCs customer service is evern worse than MPDs.
I've now been without my TP2 for over two weeks, with no sign of getting back and needless to say I'm pissed off!
Hi.
I've got a small question for all. I had my galaxy phone for only 2 weeks now, and treaded it with the same care I've done with all my phones (have had earlier a Galaxy S for 1.5 years without a single scratch on it).
Just a few days ago I saw a very thin crack in the screen, stretching from almost the edge of the top left corner, and diagonally down a bit to the right side.
Curiously as I am, I checked if anyone else had the same problem.
I found a few places online, but not a lot.
[cant add links due to first post]
I want to know if this can be a build problem, since I'm pretty sure I didn't miss treat it.
It doesn't affect the usability of the screen, meaning all pixels and everything with the touch layer seems to be working perfectly, and its quite hard to spot even if you know its there. You need the right amount of light and angle to see it. Perhaps that's why I cant find a lot about it.
Has anyone a similar problem?
That sucks. You might not be able to exchange it since that is physical damage. Youre probably going to have to live with it, sell it or get it repaired which will be costly.
Sent from my Galaxy Nexus using xda premium
Is that on the digitizer or on the glass? If its on the surface you could throw a screen protector on it to fill it in.
http://www.youtube.com/watch?v=qoMRO4OiXw4
if its on the digitizer, that shouldn't happen. I would try and get it replaced.
there is certainly no harm in taking it back to the place of purchase to see if they are willing to help...
I've tried to take it back, but they didn't want to take it without examination, and that will cost $150, and from experience, they will probably come to the conclusion that its not a manufacturer error (unless several people reports the same issue)
Its not in the top glass, but as far as I can see, its not in the digitizer either (I assume the digitizer would at least behave differently with a crack in it)
Still hoping that more people have this problem, since that would prove that its a bad batch or something..
Hi Mazy,
I just discovered a hairline crack on my nexus too.
Unfortunately I don't have a camera right now to take pictures of it, but suffice to say the crack matches the one you have!
I cannot think of how this crack came to be - its so new and hasn't been mistreated at all.
I'll try and upload some photos in the next few days if I can borrow a camera to do so.
With some effort I managed to get to take a photo with a webcam (see attachment).
I haven't yet contacted the place of purchase to see what can be done about this - I'll keep this thread posted.
Thanks for that image.. This seems to be more than a coincidence, the angle and size of the crack seems very similar. I suspect that your phone works as normal as well, and that the crack is more or less invisible in normal usage, but in specific angles it shines up?
Have you used any "heavy" program for a long time, meaning did you use a program that could make the phone become warm?
We have two similar phones here, but only one is cracked, and thats the one that we used as GPS, and using that, the phone gets hotter than normal. I dont know if that can affect it at all, but Im trying to figure out what caused it.
Hey op is your phone GSM or CDMA? Australian guy I assume yours is GSM.
I have the exact same crack that you have found in your screen. (Verizon LTE version) Thought maybe I had simply been careless with my phone but then started thinking that it might be a manufacturer issue.
Buff McBigstuff said:
Hey op is your phone GSM or CDMA? Australian guy I assume yours is GSM.
Click to expand...
Click to collapse
Its a GSM, and from the charger I got, I assume it was meant to be shipped to UK (or any other country with that type of outlet)
Slowburn72: if its possible, please take a picture as well, Im planning to use this thread to prove that this is not a user mistreating the phone, but rather some problem in manufacturing or assembly of the phone.
Slowburn72 said:
I have the exact same crack that you have found in your screen. (Verizon LTE version) Thought maybe I had simply been careless with my phone but then started thinking that it might be a manufacturer issue.
Click to expand...
Click to collapse
Wow guys, I smell something fishy here. Mark one up as my GN has the same thing.
I was out in the winter sun today for the first time with this phone after having it for about 4 weeks when I saw a line going across from the top left, diagonally down to the right side about 1/3 down.
Immediately I thought, WTF! I have NOT dropped this thing and have NOT sat on it. It's been in a case since day one which should also reinforce it. How the hell did I do this? I even tried rubbing it off when I first saw it thinking it was just another fingerprint smudge.
This is a Verizon LTE version so at this point I don't think this is specific to version.
I will also say that I am shocked that I didn't notice this before being a very picky nerd about this kind of stuff. At the same time, I can't actually see this until I get enough ambient light and hold it on an angle. It's a hairline crack beneath the topsheet of glass but not deep enough from what I can tell to affect the display. Most user damage appears to result in shattered outer glass and the fact that our cracks are the same that this is due to assembly or design.
I have a feeling we aren't the only ones with this issue. I have insurance on the phone but no way am I going to make an insurance claim considering we all have the same, and I mean SAME crack.
I will be printing this thread out when going back to where I got mine to kindly ask for a replacement. I will be taking this one up the chain, if I have to, after reading this thread. I am glad this thread was started.
I think we are on to something...
I would contact Samsung and point them to this thread. Maybe if they see its happening to multiple people they will replace it.
Same hairline crack on mine too!
I have had this galaxy nexus less than 24 hours. I literally watched a small scratch like mark turn into a diagonal and long hairline crack across 1 quarter of the screen. I didn't do anything to the phone I've had a nexus 1 for over year with no crack at all. Now I think I know why the guy was trying to sell me the warranty so hard. Will be returning the GN to best buy for a full refund.
Same symptoms everyone else is listing... shows up in only certain lighting and angles. But marked it is... ever presently defective.
Everyone with this defect, are you on gsm or verizon version? Only reason i ask is verizon version case is slightly modifies which can cause loose volume keys. Perhaps this bigger casing puts some awkward twisting force on the screen from the modified production assembly.
Thats why the crack would be in identical location on every one.
Its happened on both gsm and lte
Sent from my Galaxy Nexus using xda premium
I have the exact same "Hairline crack". Tried to get it replaced without success.
Btw, it's a GSM version.
I have a version from telus in vancouver canada. My crack is from top right (to the left of the front facing camera) and runs to the middle left side. There are absolutely no scuff marks on the phone as it has not been dropped once. Phone is in mint condition all except for this hairline crack.
I will be returning to best buy to let them know my unhappiness with this phone.
I suspect a change from inside temp afer taking video and pics all day at the local science world.. then going outside is when I noticed a small crack starting to spread. i had the phone less than 24 hours.
Unimpressed!
I also only kept the phone in my x-Large leather jacket pocket by itself.
When the phone is turned on the hairline crack can only be seen from certain angles. When it is turned off it is easier to see from the photos attached.
Coincidentally, a friend bought the GN and just told me over gchat that the same thing happened to his GN phone, as described here.
I would call samsung. Ask to speak to a manager. That is crap. If this many people are having the same crack, it isnt isolated.
While I do not have this problem, I did want to chime in here. For those of you who tried to exchange your Nexus without success, I highly recommend going to another store or taking the matter up the chain until you get a replacement.
There is absolutely no reason they can't exchange the phone. This is clearly a manufacturing defect and there is absolutely no sign of physical abuse that the user could have done to cause this. If I were in your shoes I would not give up until it got replaced.
My last resort would be to go directly to Samsung with pictures and a detailed explanation of the issue. This is completely unacceptable in my opinion.
Hi all. Quick searching leads me nowhere as there are thousands of problems concerning issues I'm NOT having. Sorry for the crappy 3ds camera pic, it's the only thing I have at my disposal right now besides the phone. As I said in the title, I'm not using a screen protector - this is a stock phone right out of the factory with no accessories, albeit aged a bit.
If you'll take a look, you'll see two screen bubbles. The huge funky-looking one at the top started out looking like the one at the bottom, and grew over a period of a few weeks. The bottom one started out really small and doubled in size to what it is now, but has since stopped.
It's really annoying and starting to bother me, but I was wondering if anyone had experienced similar issues, or has any input whether or not I can maybe fix this thing without having to get a whole new screen/digitizer/whatever. No replacement plans on this phone so gotta figure something else out. Any idea what's going on?
D-Lew said:
Hi all. Quick searching leads me nowhere as there are thousands of problems concerning issues I'm NOT having. Sorry for the crappy 3ds camera pic, it's the only thing I have at my disposal right now besides the phone. As I said in the title, I'm not using a screen protector - this is a stock phone right out of the factory with no accessories, albeit aged a bit.
If you'll take a look, you'll see two screen bubbles. The huge funky-looking one at the top started out looking like the one at the bottom, and grew over a period of a few weeks. The bottom one started out really small and doubled in size to what it is now, but has since stopped.
It's really annoying and starting to bother me, but I was wondering if anyone had experienced similar issues, or has any input whether or not I can maybe fix this thing without having to get a whole new screen/digitizer/whatever. No replacement plans on this phone so gotta figure something else out. Any idea what's going on?
Click to expand...
Click to collapse
Is the plastic actually raised up? Can you see it when the screen is off? To me it looks like the digatizer may be going out, but its hard to tell from a pic.
It appears to be sealed and working fine... just has bubbles. I don't really know much about the insides of this phone, but it almost looks as if whatever is behind the digitizer is slightly warped and might be causing some contact with the glass or something like that. Reflections (off what is behind the screen - lcd? Not the reflections off the glass) tend to bend near the bubbles, whereas everywhere else behind the glass is pretty straight.
Essentially it just looks like water droplets or air bubbles forming on the inside surface of the glass, but it's never seen water before. I don't think the digitizer is failing.
Same problem, can I fix this myself?
Hi guys, I have the exact same problem on my HTC Desire. Touch is working fine, the pixels underneath are ok... yet this thing is expanding. What used to be 3 little bubbles near the very corner moved and turned into this amoeba looking thing after a few months.
Here are a few other shots.
Hope someone can let me know the possible verdict? Is it gone? Can it only be repaired by a professional or can I expect to be able to "clean up" the inside of the screen if I dismantle my phone as it is done here?:
http://forum.xda-developers.com/showthread.php?t=1566313
Maybe the liquids from the lcd are boiling from the heat? Sounds dumb but is a possibility
Sent from my ADR6300 using xda app-developers app
Yikes. Mine is still having the same issues. I'm thinking about just tearing it down soon and figuring it out myself. A little nervous working on something with such small components. Any tips for a first teardown? I need to get a T6 torx and I've already looked at a couple disassembly guides, was a while ago though.
As far as I can tell, I will have to replace either the digitizer/glass or the LCD. If it's the latter I'll probably just upgrade the phone cause they seem pretty pricey.
Ok, I did what I said and investigated myself. Unfortunately, I broke my phone doing it.
The problem is the front glass/digitizer. I couldn't get the LCD off, but I pried it back enough to see bubbles through the glass looking from the inside.
I broke my LCD prying on it, now I have an ugly black spot. Guess I'll be buying an LCD and a digitizer now. Anybody have some spare ones, or know the cheapest place to get them?
D-Lew said:
Ok, I did what I said and investigated myself. Unfortunately, I broke my phone doing it.
The problem is the front glass/digitizer. I couldn't get the LCD off, but I pried it back enough to see bubbles through the glass looking from the inside.
I broke my LCD prying on it, now I have an ugly black spot. Guess I'll be buying an LCD and a digitizer now. Anybody have some spare ones, or know the cheapest place to get them?
Click to expand...
Click to collapse
There are some digitizers on ebay for about $20 USD. i dont know about LCDs cause i never needed to replace mine but i would assume that they would be a little more expensive. Also, make sure you get the digitizer WITH the bezel because it will make your life a ton easier.
I'd better not touch it then
Sorry to hear about your LCD, D-Lew
Guess I wont be touching mine on my own. I'll definitely break it trying to do the same thing as you. I wonder if it's gonna break my phone if I just leave it as is. I mean, apart from the fact that it is there, it is not affecting the performance at all.
The bubble might get bigger. That's all you have to worry about.
Sent from my GT-P3113 using xda app-developers app
Hello,
I'm a new to this so don't be mean.
My nexus 7.2 receives a grayish blueish smudge right down on the bottom middle of the screen probably on the 3rd quarter of the screen. Every time I apply medium pressure to anywhere the on bottom half of the screen the discoloration happens. Is this normal?
Thanks
No, that's not normal. Only thing I could think to try would be to try a kernel that allows you to change color and hue of the screen. If that doesn't help it sounds like you either might need to find a new screen and do a self repair or send it off for a fixing. Can't recall anybody else ever mentioning that. Unless somebody else has a better idea though, I think that's your only two options.
...man said:
Hello,
I'm a new to this so don't be mean.
My nexus 7.2 receives a grayish blueish smudge right down on the bottom middle of the screen probably on the 3rd quarter of the screen. Every time I apply medium pressure to anywhere the on bottom half of the screen the discoloration happens. Is this normal?
Thanks
Click to expand...
Click to collapse
Does it look like a light bleed or something? I realize you're new and they might not let you post pictures and stuff, but it's hard to say without seeing what the screen does.
It looks like pressure is accumulating upward at the single point, creating a grayish hue. I guess to be an example, when you press hard on an LCD there will be a rainbow hue next to or on the pressure point. But mine is always at a single spot.
Yeah, I think you have a display/hardware issue on your hands. I was just playing Dungeon Hunters last night in landscape and was hitting both sides of my screen pretty intensively and saw no color changes. If it's bad enough, you'll probably need to send it in for repair or try the DIY route. Sorry, not much else I can think of to help with your issue
Okay thank you for the input. I just have one more question, since the pressure seems to accumulatting in one spot, will that crack my screen? Because the color part is minor and I do not mind that slight discoloration. All I really care about is the chance that will crack my screen.
...man said:
Okay thank you for the input. I just have one more question, since the pressure seems to accumulatting in one spot, will that crack my screen? Because the color part is minor and I do not mind that slight discoloration. All I really care about is the chance that will crack my screen.
Click to expand...
Click to collapse
I doubt it, not unless you dropped it or something where you think you may have caused a weakness in the glass itself. You gotta remember, on all these device there are multiple layers to the glass itself. I'm guessing there might be a small defect in yours between two of those layers. Do you remember it happening after you did something or did it one day just start happening. If it's the latter, then definitely a manufacturing defect. If it's bad enough, if it were me I'd do some research and see how much it'd be to replace the screen. Depends on how long you were planning on keeping the tablet.
I broke my Nexus's screen and digitizer two weeks ago, I got it replaced by a company and that is when I noticed that grayish hue. Should I go back and ask them about it, because I plan to keep my tablet for a while. Also, as I said before I don't mind the color, I just want to know will my screen crack eventually from the increased (I'm guessing) pressure accumulating in that one spot.
I would definitely go ask them. Being that it is a replacement screen I'd go get either their professional opinion or another. Ideally ask them about it and then get another opinion. In a normal situation I'd say no to your screen possibly cracking, but there's something obviously wrong with the screen. I would say it shouldn't but I'd take it back and get a second opinion just to be on the safe side if it's not too much money.
Thank you for your replies.
...man said:
Thank you for your replies.
Click to expand...
Click to collapse
Replacement digitizers are of various grades. There are those that work but didn't pass QC because of minor defects. These sell at lower prices. It's true that the LCD surface is harder to crack than the digitizer. But it lies on top of another much thinner layer that would crack as readily as the digitizer given undue pressure while handling it. The people who replaced should definitely be held accountable whether it's their fault or the manufacturer's. Hold them to it since if it's a tiny crack now, it's bound to expand with time..
All good here with Lollipop AOSP !!!
graphdarnell said:
Replacement digitizers are of various grades. There are those that work but didn't pass QC because of minor defects. These sell at lower prices. It's true that the LCD surface is harder to crack than the digitizer. But it lies on top of another much thinner layer that would crack as readily as the digitizer given undue pressure while handling it. The people who replaced should definitely be held accountable whether it's their fault or the manufacturer's. Hold them to it since if it's a tiny crack now, it's bound to expand with time..
Click to expand...
Click to collapse
I went in and asked them about it. They told me since I broke it and had it repaired, not everything is going to be 100% and that funny looking grayish thing from pressure is the result of them putting in a new screen.
Would that grayish thing really cause my screen to crack? What should I do?
...man said:
I went in and asked them about it. They told me since I broke it and had it repaired, not everything is going to be 100% and that funny looking grayish thing from pressure is the result of them putting in a new screen.
Click to expand...
Click to collapse
Well then, aren't they saying it's their doing that's causing it? I am not a technician, but I've replaced quite a few. I did it for fun, and a chance at learning what it's made of. Nothing you experienced was supposed to happen with a functional combo (even a B grade unit) , put in place carefully. They're supposed to have the necessary skills. They charged you for it. It doesn't cut it when their reply is that they don't measure up to the job, unless I'm missing something here.
Depending on the tape they used, removing the screen would more likely than not break it. But it's their responsibility. They chose the vendor, and they installed it, and now it has a defect. I'd contact the BBB if they refuse to fix it for free. It's an issue of implied warranty.
graphdarnell said:
Well then, aren't they saying it's their doing that's causing it? I am not a technician, but I've replaced quite a few. I did it for fun, and a chance at learning what it's made of. Nothing you experienced was supposed to happen with a functional combo (even a B grade unit) , put in place carefully. They're supposed to have the necessary skills. They charged you for it. It doesn't cut it when their reply is that they don't measure up to the job, unless I'm missing something here.
Depending on the tape they used, removing the screen would more likely than not break it. But it's their responsibility. They chose the vendor, and they installed it, and now it has a defect. I'd contact the BBB if they refuse to fix it for free. It's an issue of implied warranty.
Click to expand...
Click to collapse
Quick question, how do I attach a picture, so you guys can see what it looks like?
Thanks
Hi xda,
I am observing something very strange on my phone, and since I dropped it last week, I observed a new occurrence.
So now I have 3 scratch-like scars on my display, but they are not on the surface, but down below, they are perfectly straight and seem to be on the exact border between the display and the frame.
Sadly, I could only make one picture, since my phone has the better camera.
Hi,
i have a similar scratch in my P6 similar of yours...I didn't notice right away,only looking the screen very closely...My scratch is at the left-top of the border,straight to it.
you too. has the same scratch. is under the glass. I wonder if the warranty replaces.
So, it's not just me.... When I have time I will go back to stock and then go to the operator and ask for opinion and/or replacement.
I went to my carrier but they refused to fix it under warranty. It was due to the use of the phone, and I'd be charged 200 euro for the complete screen replacement. Not that this phone worth more now a days. And sadly my scratches have gotten a little big longer