I've already ordered the Mine Keyboard and the Adapter to later know that atrix uses a micro USB...
this is the adapter:
http://produto.mercadolivre.com.br/...-conversor-usb-a-fmea-para-mini-usb-macho-_JM
Sure it doesnt fit in atrix. but.. if i buy this?
http://produto.mercadolivre.com.br/...-para-micro-usb-motorola-moto-q11-cpmt018-_JM
and then convert micro to mini then mini to usb normal? would i be able to plug a keyboard? Thanks
or even buy this new one?
http://produto.mercadolivre.com.br/MLB-195555339-conversor-usb-femea-para-micro-usb-_JM
Lordareon said:
I've already ordered the Mine Keyboard and the Adapter to later know that atrix uses a micro USB...
this is the adapter:
http://produto.mercadolivre.com.br/...-conversor-usb-a-fmea-para-mini-usb-macho-_JM
Sure it doesnt fit in atrix. but.. if i buy this?
http://produto.mercadolivre.com.br/...-para-micro-usb-motorola-moto-q11-cpmt018-_JM
and then convert micro to mini then mini to usb normal? would i be able to plug a keyboard? Thanks
or even buy this new one?
http://produto.mercadolivre.com.br/MLB-195555339-conversor-usb-femea-para-micro-usb-_JM
Click to expand...
Click to collapse
you will not be able to plug in a USB peripheral (mouse, keyboard) directly into the phone. it will not work.
you can, however, purchase a +5V powered USB hub (that plugs into the wall), and use that to plug into the phone and plug your KB/mouse into the hub, and it should work. you can find such hubs at www.dealextreme.com
to further answer your question, USB-___USB converters will work as long as the converters have all four lines hooked up. many converters are 'power-only' where only the power/ground lines are connected and the other two lines (data) are not.
So if i buy an ordinary pc hub that connects to power and the plug usb-to-microusb, it will work?
Well let it alone, ill buy a Bluetooth keyboard, will spare time and cables and converters ahahha
The Micro USB plug must be OTG (USB ON THE GO) or your phone won't recognize the peripheral. Also the advice given was correct, the phone USB port can't provide power to a peripheral device and so you must use a powered hub in between the phone and the peripheral device.
A USB OTG has pin 5 and pin 4 tied together in the Micro USB connector end to tell the phone to invoke OTG mode.
Lordareon: yea... if you'd go the wired route, you'd need a powered USB hub, since the Atrix's micro-USB port doesn't work as a host port. It doesn't provide power to external devices.
elementaldragon said:
Lordareon: yea... if you'd go the wired route, you'd need a powered USB hub, since the Atrix's micro-USB port doesn't work as a host port. It doesn't provide power to external devices.
Click to expand...
Click to collapse
already been stated twice.
Has anyone found a MHL cable that also includes a USB OTG port? Samsung reportedly changed from a 5-pin configuration to an 11-pin configuration to allow MHL with USB Host mode simultaneously. Perhaps for a future Desktop Mode?
Has anyone been able to find one of these cables?
Just wanted to update, I believe I found the type of connector that I was looking for, but it is missing HDMI and it is sold out. This essentially could give you PC type connectivity on the S3.
http://www.mobilefun.com/35462-mobile-fun-connection-kit-for-samsung-galaxy-s3.htm
I think we still have a bit of a wait. What you found is essentially a USB OTG hub with some card readers built in. I seriously doubt this will pass through the pins for HDMI to work out of the usb port. We'll see something when this phone finally launches everywhere. It's not even out in the US officially yet
EDIT: Sorry, didn't see the article in the link in the OP. Man.. I might have to get me a GS3 now. I'm quite satisfied with the reasoning for a pin change. =)
Samsung sells 11 pin MHL adapters and USB female to Micro USB male adapters on their accessories page, but I'm not sure if you could piggy back the USB input into the charging port of the MHL cable. I don't see any all in one cables on their site, and the desktop dock is just micro usb/audio. I tried.. =(
Here's what I was looking at.
Old and mostly unrelated. See edit.
I happened to buy what looks exactly like that adapter today earlier at Micro Center. Now, I do have a Galaxy Nexus, but the USB OTG works great with keyboards/usb/mice/hubs; however, I cannot get it to simultaneously work with my MHL adapter. I understand the GS3 has a different pin layout though for MHL - my phone works with my MHL adapter correctly, but I didn't think it would have any change on the USB OTG. I'll most likely be breaking these apart and start tinkering. My goal is to show people how much of a full desktop-like experience I can provide from my phone, since so many people somehow think a GNex or GS3 are inferior to tablets, just because they're smaller... lol
Good luck finding information out on some kind of MHL/USB OTG setup. I'm just trying to provide any information I can from how my situation works with MHL/OTG, since I'm currently on the quest to achieve this myself.
kynolin said:
EDIT: Sorry, didn't see the article in the link in the OP. Man.. I might have to get me a GS3 now. I'm quite satisfied with the reasoning for a pin change. =)
Samsung sells 11 pin MHL adapters and USB female to Micro USB male adapters on their accessories page, but I'm not sure if you could piggy back the USB input into the charging port of the MHL cable. I don't see any all in one cables on their site, and the desktop dock is just micro usb/audio. I tried.. =(
Here's what I was looking at.
Old and mostly unrelated. See edit.
I happened to buy what looks exactly like that adapter today earlier at Micro Center. Now, I do have a Galaxy Nexus, but the USB OTG works great with keyboards/usb/mice/hubs; however, I cannot get it to simultaneously work with my MHL adapter. I understand the GS3 has a different pin layout though for MHL - my phone works with my MHL adapter correctly, but I didn't think it would have any change on the USB OTG. I'll most likely be breaking these apart and start tinkering. My goal is to show people how much of a full desktop-like experience I can provide from my phone, since so many people somehow think a GNex or GS3 are inferior to tablets, just because they're smaller... lol
Good luck finding information out on some kind of MHL/USB OTG setup. I'm just trying to provide any information I can from how my situation works with MHL/OTG, since I'm currently on the quest to achieve this myself.
Click to expand...
Click to collapse
I'm not really sure why people think they NEED MHL and USB OTG simultaneously to get a "desktop-like experience". You can already accomplish this with just a plain MHL cable and a bluetooth keyboard and mouse as was demonstrated in the Connectivity Demo video on youtube.
Edit: Actually I just remembered about portable hard drives. If you want to hook up a mouse, keyboard AND hard drive I wonder if you can plug all three into a powered USB hub connected to a bluetooth dongle. Hmm...
I'm looking for a dock with USB OTG, charging and MHL. Maybe some day.
I believe this is already capable. Everything I say here is purely speculative, but what I see is that Samsung moved to a 11-pin connector for MHL and the standard 5-pin is no longer functioning. To call it MHL, they probably have to use the same standards for data encoding... but they simply "moved" the pins.
I put "moved" in quotes because of the way in which a standard 4 pin USB cable works (or 5 pin for our case)... you have a +5V, Ground, Data + and Data - (one data to phone, one data from phone, carrying ALL data). Since our phones still sync via 5-pin cables, this means the 5 pins are still "hot" for data like all other phones. I am presuming, that for the 11-pin connector, Samsung simply added a few more data+ and data- connectors (much like having two or three USB ports on a normal computer) but consolidated the ground/5V reference. I could be wrong, but it would make sense.
Lets call the stock 5 pin data connectors (2 wires) USB1. This is where MHL is conventionally sent through and all sycing can be completed through, 5 pin cable or 11 pin cable. If samsung added two additional USB ports to the single connector, lets say MHL is now over USB2 (wires inaccessible to 5 pin connectors). This frees up bandwidth and COM ports on USB1 and USB3 to use for accessories like a USB hard drive and keyboard/mouse. On a 5 pin connector, however, only USB1 is accessible. The Samsung 11pin to 5pin MHL adapter simply moves the data+/- from USB2 to USB1 (standard 5 pin location), so with the adapter you are syncing/exporting video over USB2 on the phone with a standard 5pin cable.
My thinking is such: If you plug in the OEM 11pin MHL adapter, it will also have access to the standard 5pin USB1 connection. Since USB2 is used for MHL, you can then plug any OTG device into the micro USB connector on the MHL adapter to make use of it. The only problem here is power (or lack thereof). By plugging in a USB hub with a discrete power source, plugging this into the MHL adapter, and plugging in the USB device of choice into the HUB, you *SHOULD* be able to get simultaneous data and HDMI. This assumes they put the standard 5 pins to the connector on the side of the MHL adapter and only wired the HDMI to the USB2 area.
Alternatively, you *SHOULD* be able to plug the micro USB cable from the MHL adapter into a computer, and simultaneously be able to sync files while outputting HDMI video. It sort of just comes down to being able to provide power to the MHL adapter on the +5V pin while using the data pins to access the phone. As soon as I have my MHL I'll figure it out, but that could be a bit. If anybody has access to a pinout from a Samsung 11 pin micro USB that would be helpful too.
Again, just dreaming here. I don't know anything about this, but if I was the engineer at Samsung I would choose this over analog outputs like Apple used for their giant connector.
kthung said:
I'm not really sure why people think they NEED MHL and USB OTG simultaneously to get a "desktop-like experience". You can already accomplish this with just a plain MHL cable and a bluetooth keyboard and mouse as was demonstrated in the Connectivity Demo video on youtube.
Edit: Actually I just remembered about portable hard drives. If you want to hook up a mouse, keyboard AND hard drive I wonder if you can plug all three into a powered USB hub connected to a bluetooth dongle. Hmm...
Click to expand...
Click to collapse
for me at least i already have several keyboards and mice ... none are bluetooth.
I'm looking for the cheapest option available.
I'm just hoping someone releases a cable with 4 plugs:
Male MHL - To Phone Obviously
Female MicroUSB: To plug in charger
Female HDMI - To Display
Female USB - To USB Device
That's all I want... should cost less than $2 to make, just sell it for $20 and I'd be happy.
v8bait said:
I believe this is already capable. Everything I say here is purely speculative, but what I see is that Samsung moved to a 11-pin connector for MHL and the standard 5-pin is no longer functioning. To call it MHL, they probably have to use the same standards for data encoding... but they simply "moved" the pins.
I put "moved" in quotes because of the way in which a standard 4 pin USB cable works (or 5 pin for our case)... you have a +5V, Ground, Data + and Data - (one data to phone, one data from phone, carrying ALL data). Since our phones still sync via 5-pin cables, this means the 5 pins are still "hot" for data like all other phones. I am presuming, that for the 11-pin connector, Samsung simply added a few more data+ and data- connectors (much like having two or three USB ports on a normal computer) but consolidated the ground/5V reference. I could be wrong, but it would make sense.
Lets call the stock 5 pin data connectors (2 wires) USB1. This is where MHL is conventionally sent through and all sycing can be completed through, 5 pin cable or 11 pin cable. If samsung added two additional USB ports to the single connector, lets say MHL is now over USB2 (wires inaccessible to 5 pin connectors). This frees up bandwidth and COM ports on USB1 and USB3 to use for accessories like a USB hard drive and keyboard/mouse. On a 5 pin connector, however, only USB1 is accessible. The Samsung 11pin to 5pin MHL adapter simply moves the data+/- from USB2 to USB1 (standard 5 pin location), so with the adapter you are syncing/exporting video over USB2 on the phone with a standard 5pin cable.
My thinking is such: If you plug in the OEM 11pin MHL adapter, it will also have access to the standard 5pin USB1 connection. Since USB2 is used for MHL, you can then plug any OTG device into the micro USB connector on the MHL adapter to make use of it. The only problem here is power (or lack thereof). By plugging in a USB hub with a discrete power source, plugging this into the MHL adapter, and plugging in the USB device of choice into the HUB, you *SHOULD* be able to get simultaneous data and HDMI. This assumes they put the standard 5 pins to the connector on the side of the MHL adapter and only wired the HDMI to the USB2 area.
Alternatively, you *SHOULD* be able to plug the micro USB cable from the MHL adapter into a computer, and simultaneously be able to sync files while outputting HDMI video. It sort of just comes down to being able to provide power to the MHL adapter on the +5V pin while using the data pins to access the phone. As soon as I have my MHL I'll figure it out, but that could be a bit. If anybody has access to a pinout from a Samsung 11 pin micro USB that would be helpful too.
Again, just dreaming here. I don't know anything about this, but if I was the engineer at Samsung I would choose this over analog outputs like Apple used for their giant connector.
Click to expand...
Click to collapse
hi v8bait, are you able to get data thru the micro usb port at the side of the 11-pin mhl adapter? i was thinking of using the motorola lapdock with my s3 thru the mhl adaptor (other then a micro hdmi male connector, the lapdock also has a micro usb male connector that apparently send out power as well as push keyboard/trackpad data upstream) - if it works, we can have an inexpensive "clambook"
Just to recap,
Will this we possible:
Official MHL adapter -> hdmi to monitor.
|
>OTG cable> Powered USB hub> USB keyboard & mouse.
In other words, the PC Experience with a keyboard and mouse.
Dont really want to spend the money to buy a Bluetooth keyboard and mouse when the USB ones can work just fine (theoretically).
romulusram said:
Just to recap,
Will this we possible:
Official MHL adapter -> hdmi to monitor.
|
>OTG cable> Powered USB hub> USB keyboard & mouse.
In other words, the PC Experience with a keyboard and mouse.
Dont really want to spend the money to buy a Bluetooth keyboard and mouse when the USB ones can work just fine (theoretically).
Click to expand...
Click to collapse
I am also very interested in this exact thing. Using USB devices (multiple ones, e.g. plugging a powered USB hub into S III and then plugging them in) but also putting out S III video to HDMI.
However the other workaround is using AllShare Cast. In fact that is the route I'll likely go, because of the other unique advantages of AllShare Cast (i.e. using it for presentations to screens, etc.)
So: has anyone plugged a powered USB hub into S III and used multiple devices? Such as a keyboard and mouse?
I also want to use this S III more as a computer. the other perfect thing I wish I could buy would be a keyboard case, like the one available for iphone, so I can prop the S III up on a kickstand and use a real mini-QWERTY physical keyboard.
macdroid01 said:
I am also very interested in this exact thing. Using USB devices (multiple ones, e.g. plugging a powered USB hub into S III and then plugging them in) but also putting out S III video to HDMI.
However the other workaround is using AllShare Cast. In fact that is the route I'll likely go, because of the other unique advantages of AllShare Cast (i.e. using it for presentations to screens, etc.)
So: has anyone plugged a powered USB hub into S III and used multiple devices? Such as a keyboard and mouse?
I also want to use this S III more as a computer. the other perfect thing I wish I could buy would be a keyboard case, like the one available for iphone, so I can prop the S III up on a kickstand and use a real mini-QWERTY physical keyboard.
Click to expand...
Click to collapse
We're in the same boat; i want to use the s3 like a mini computer too. I think it'd be great for business travel, when i dont really need a laptop during the day but want something when i'm back in hotel room. I'd much rather use hotel TV instead of a laptop because that's what i am used to at home... pc hooked to TV.
I've been planning to use the allshare cast dongle too, but they dont seem to be available yet. I was thinking HDMI out with the allshare.. charging with the wireless charging kit and then keyboard and mouse with USB OTG. My logitech unifying receiver for keyboard/mouse works perfectly i just need the wireless charging and allshare dongle to be released.
For what it's worth I tried a powered USB hub and could not get it to work with the s3.
faulkton said:
For what it's worth I tried a powered USB hub and could not get it to work with the s3.
Click to expand...
Click to collapse
Wait so your saying you tried a (a) powered USB hub with a OTG cable connected to the phone or you tried a (b) powered USB hub connected with a OTG cable to the MHL adapter and then to the phone?
If it was (a) then there are some vids out there of ppl using powered USB hubs.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
I'm puzzled that there aren't any more postings about this kind of stuff. I was expecting the GS3 to be easy to use as a "PC" replacement but it seems no one besides us few wanted to do that ? A simple cable should have done it but I'd even be willing to shell out 40-50$ for a decent dock that would do just that
romulusram said:
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
Click to expand...
Click to collapse
Me too.
But it is possible to get that this way working:
Code:
S3 -> Mobile Fun Connection Kit -> microusb -> HDTV Adapter TIP (5 to 11 Pin Converter) -> MHL HDMI adapter
|
-> USB -> keyboard etc.
Links
http://www.mobilefun.com/35462-mobile-fun-connection-kit-for-samsung-galaxy-s3.htm
http://www.samsung.com/us/mobile/cell-phones-accessories/EPL-FU10BEGSTA
Maybe I'm not reading these posts correctly but I am using an usb keyboard and a usb mouse on my S3 with no problems using these two accessories:
http://www.amazon.com/Belkin-USB-2-...e=UTF8&qid=1343845994&sr=8-1&keywords=usb+hub
http://www.amazon.com/Micro-USB-OTG...UTF8&qid=1343846045&sr=1-3&keywords=otg+cable
Have my keyboard and mouse plugged into the usb hub and then the usb hub into my usb OTG cable which of course plugs into the S3. Everything's working on my end.
romulusram said:
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
Click to expand...
Click to collapse
I have the official MHL adapter and there is no female USB port on it for OTG
badbeat33 said:
Maybe I'm not reading these posts correctly but I am using an usb keyboard and a usb mouse on my S3 with no problems using these two accessories:
http://www.amazon.com/Belkin-USB-2-...e=UTF8&qid=1343845994&sr=8-1&keywords=usb+hub
http://www.amazon.com/Micro-USB-OTG...UTF8&qid=1343846045&sr=1-3&keywords=otg+cable
Have my keyboard and mouse plugged into the usb hub and then the usb hub into my usb OTG cable which of course plugs into the S3. Everything's working on my end.
Click to expand...
Click to collapse
You are not reading it right.
they want to use the MHL adapter, too.
As far as i can tell, the MHL adapter needs to be in the phone, not a hub. it is all dictated (the output being OTG, or MHL) by the impedance of what is plugged in. It is an either or situation.
Perhaps with a firmware update they MIGHT be able to run both signals and split it.. but i doubt it.
The new MHL adapter for the Galaxy S III supports both HDMI and USB OTG simultaneously, according to this article:
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
I'm wondering if this means it could be used for USB OTG with a flash drive while charging the phone at the same time--something that's impossible with current adapters and cables. And does it also work with the Galaxy Nexus? Does anyone happen to have the adapter and a GN to test this?
highvista said:
The new MHL adapter for the Galaxy S III supports both HDMI and USB OTG simultaneously, according to this article:
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
I'm wondering if this means it could be used for USB OTG with a flash drive while charging the phone at the same time--something that's impossible with current adapters and cables. And does it also work with the Galaxy Nexus? Does anyone happen to have the adapter and a GN to test this?
Click to expand...
Click to collapse
My friend has an S3 and I know the 5 pin MHL adapter we use doesn't work with his because of the pin configuration, so I would assume if he can't get HDMI out using the 5pin, we won't be able to get HDMI out using the 11pin. Of course I am only guessing, but it makes sense to my mind.
I don't see how it could work, to use the HDMI out you need the charger cable plugged in to the MHL adaptor. So where would the OTG cable go?
danben7 said:
I don't see how it could work, to use the HDMI out you need the charger cable plugged in to the MHL adaptor. So where would the OTG cable go?
Click to expand...
Click to collapse
Looks to me like the standard S3 MHL adapter has a micro USB "charging port". Could be that it could also accept an external drive. I don't have the phone or the cable yet, so I can't test. Maybe somebody who has both could post results?
it's not actually a charging port, it's a power port because apparently it needs more power to output HDMI, i.e. if you don't have the charger plugged in to the vacant port, no HDMI.
Samsung does sell a bunch of dual head micro usb to usb cables.... so maybe you need one of those and they sell this: http://www.samsung.com/us/mobile/cell-phones-accessories/ET-R205UBEGSTA which says it allows you connect drives, keyboards, etc to S3's....
Yeah those work, I actually use this one:
http://www.ebay.com/itm/Micro-USB-2...100-Note-i9220-Nexus-i9250-XOOM-/120894431890
or something similar, but you still can't use HDMI when you use those
you can however plug in keyboard, mouse, usb drive and anything else you want all at once which is cool
danben7 said:
Yeah those work, I actually use this one:
http://www.ebay.com/itm/Micro-USB-2...100-Note-i9220-Nexus-i9250-XOOM-/120894431890
or something similar, but you still can't use HDMI when you use those
you can however plug in keyboard, mouse, usb drive and anything else you want all at once which is cool
Click to expand...
Click to collapse
Is that one on eBay compatible with the S3????? Isn't the pin out's different?
stan.s said:
Is that one on eBay compatible with the S3????? Isn't the pin out's different?
Click to expand...
Click to collapse
only MHL is affected by the pins, usb OTG is not affected by the new layout
I had some initial difficulty getting a micro usb OTG cable working, I ended up testing a few and thought I would share in case it saves anyone else some time or money.
if anyone else has adapters they've tried feel free to list them
I actually haven't tried a straight USB type C OTG cable yet, all have been micro USB OTG units with a micro USB to type C converter since I already had so many lying around.
First off I should mention not all micro usb to USB type C converters support OTG.
this Meenova one does and works with the oneplus 3t: https://www.amazon.com/gp/product/B018G6IK7E/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
with that converter pretty much any OTG adapter will work.
Charging also works.
This micro USB OTG adaptor is nice because its so low profile.
I tested it with a flash drive and it works fine with the Meenova adapter listed above.
https://www.amazon.com/gp/product/B0196FG4DG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
This Samsung adapter also works well with the Meenova adapter, it has quite a few features which I tested on the Oneplus 3t, its expensive though so unless you have a Samsung tablet as well its not likely to be worth it for most people:
built in features:
two USB ports
Ethernet port
Charging port for simultaneous charging and OTG
On the Oneplus 3t both charging and OTG work fine but not at the same time.
whichever you plug in first is what it will use until you unplug and re-plug in the adapter.
That being said my understanding is that this is likely just a kernel limitation, it was the same way on the nexus 7 and a custom kernel enabled the simultaneous charging.
I'm not sure how useful that would be on a phone but I thought I would mention it.
Both USB ports work simultaneously, I connected two flash drives and both were picked up by the phone right away.
I wasn't able to get the Ethernet port working, or at least there was no indicator that it was working (My samsung tablet gives a notification that the Ethernet is plugged in but Samsung may have added that, I'm not sure) I'll play with it some more later.
Adaptor link: https://www.amazon.com/gp/product/B00J2N0GB4/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
and lastly I tried this micro USB to type c adapter and charging works but OTG does not:
https://www.amazon.com/gp/product/B0191FRCAA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Thanks for your post about OTG adapters. Do you have any updates on this issue? I'm looking for possible adapters but cannot find any.
The Meenova adapter is not available in Europe and also seems not to be available from Amazon.com anymore. I can also disadvise from Anker USB adapter because it doesn't work.
What I'm looking for is an USB typ-C to microUSB adapter for audio output via USB.
Anker adapter supports dash charge (works with oppo vooc power bank). I am trying OTG now, but I have some cheap OTG dongle (https://www.aliexpress.com/item/5pc...G-adapter-for-HTC-for-Samsung/1734417126.html) and I am not sure if it works at all Anyway OTG via Anker is not working for me at this moment.
mmmm1234 said:
Thanks for your post about OTG adapters. Do you have any updates on this issue? I'm looking for possible adapters but cannot find any.
The Meenova adapter is not available in Europe and also seems not to be available from Amazon.com anymore. I can also disadvise from Anker USB adapter because it doesn't work.
What I'm looking for is an USB typ-C to microUSB adapter for audio output via USB.
Click to expand...
Click to collapse
i have this one
http://www.ebay.co.uk/itm/381793306261
Black / For One Plus Two 2 3 (that's what it says in the drop down)
my Fiio E10k headphone amplifier works with it if that's what you're looking for
reubenbubu said:
i have this one
Black / For One Plus Two 2 3 (that's what it says in the drop down)
my Fiio E10k headphone amplifier works with it if that's what you're looking for
Click to expand...
Click to collapse
Thanks! Though it's USB type B. I need micro USB.