UPDATE 2015\08\01 ICS & JB Patch
Since ICS and JB contain boosted (modified boostedass) and sio by default now, I made a cwm zip to patch the default values of boosted and sio's correct values (they're for cfs in CM9\10). This is not for CM7 and won't work with it.*
Link to Post
UPDATE 2015\05\16 DroidXGovernorsV2.2
Removed blank bootmenu folder
Cleaned up init script, removed unsupported lines, added supported lines
Included SD Card Cache Tweak with 2048 value, to match io tweaks
**The lines weren't supported on Bravo Froyo Kernel, added new lines from /sys/block/mmcblk0/queue/iosched**
**If the removed lines are supported on GB Kernel, let me know and I'll make a zip for each kernel.**
**Just remove the last 2 lines of the init script if you don't want\need the SD Cache Tweak**
UPDATE 2015\05\15 DroidXGovernorsV2.1
Screenshots showing battery savings and usage
Fixed dumb script error
UPDATE 2015\05\15 DroidXGovernorsV2
Removed Undervolted Cpu Clocks -- Gave problems for Defy+ useres on GB kernel
SIO IO Scheduler now properly loads -- No market app needed now.
This CWM compatible zip will install the DroidX smartassv2 and BOOSTEDassV2 cpu governors as well as the SIO Kernel Scheduler. While I've only tested this on CM9, it should work on ANY rom with init.d support and Defy 2nd-init Bootmenu....meaning all CM7\9 and Miui roms. I'm unsure if MS2Ginger and Stock Froyo have init.d support. It also undervolts the rom to [email protected], [email protected], and [email protected] Those values work fine with CM9 on my phone, meaning no fc's due from being too undervolted.
To install, simply flash the zip in cwn and you're done. Wiping Cache and Dalvik Cache isn't necessary.
To use the Governors, select the governor in the CM Performance Menu and select apply on boot, or use a CPU Governor program from the market. I recommend No Frills CPU Control --- its free, no ads, no bs permissions, and you can select the io scheduler.
To use the SIO Kernel Scheduler, install No Frills Cpu Control from the market and select SIO (or noop) from the bottom menu.
I haven't used SIO very much (5-10 mins now), but it seems to be working well. The noop scheduler works great, and is what I normally use; but I've always read good things about SIO (and wanted to use it), so I thought I'd include it as well.
I'd give thanks to the authors of the Governors and Schedulers, but I have no idea who wrote them....I only found them in Beanstown106's DroidX Miui V4 rom and they happen to work wonderfully on the Bravo.
UPDATE Post
SimpleOverclock
An alternative to No Frills CPU Control with profile support, apply on boot, io changer, governor changer, & more features to come. Probably going to be my new overclock app, need to test for more than a few minutes.
My Little Experiment
I uploaded the governors here for the Bravo, and to Mediafire for the Defy. In the first 2 hours of posting -- 6 Bravo downloads to 45 Defy Downloads (and a page full of posts). Not very surprising, but interesting none-the-less.
*CM7 - The modules for boosted and sio aren't included with this patch making it useless for CM7. I've already released a patched CM7 with this in my Kang thread.
skeevy420 said:
UPDATE 2015\05\15 DroidXGovernorsV2
Removed Undervolted Cpu Clocks -- Gave problems for Defy+ useres on GB kernel
SIO IO Scheduler now properly loads -- No market app needed now.
Download DroidXGovernorsV2.zip
This CWM compatible zip will install the DroidX smartassv2 and BOOSTEDassV2 cpu governors as well as the SIO Kernel Scheduler. While I've only tested this on CM9, it should work on ANY rom with init.d support and Defy 2nd-init Bootmenu....meaning all CM7\9 and Miui roms. I'm unsure if MS2Ginger and Stock Froyo have init.d support. It also undervolts the rom to [email protected], [email protected], and [email protected] Those values work fine with CM9 on my phone, meaning no fc's due from being too undervolted.
To install, simply flash the zip in cwn and you're done. Wiping Cache and Dalvik Cache isn't necessary.
To use the Governors, select the governor in the CM Performance Menu and select apply on boot, or use a CPU Governor program from the market. I recommend No Frills CPU Control --- its free, no ads, no bs permissions, and you can select the io scheduler.
To use the SIO Kernel Scheduler, install No Frills Cpu Control from the market and select SIO (or noop) from the bottom menu.
I haven't used SIO very much (5-10 mins now), but it seems to be working well. The noop scheduler works great, and is what I normally use; but I've always read good things about SIO (and wanted to use it), so I thought I'd include it as well.
I'd give thanks to the authors of the Governors and Schedulers, but I have no idea who wrote them....I only found them in Beanstown106's DroidX Miui V4 rom and they happen to work wonderfully on the Bravo.
UPDATE Post
SimpleOverclock
An alternative to No Frills CPU Control with profile support, apply on boot, io changer, governor changer, & more features to come. Probably going to be my new overclock app, need to test for more than a few minutes.
My Little Experiment
I uploaded the governors here for the Bravo, and to Mediafire for the Defy. In the first 2 hours of posting -- 6 Bravo downloads to 45 Defy Downloads (and a page full of posts). Not very surprising, but interesting none-the-less.
Click to expand...
Click to collapse
wow you are amazing skeevy420 to try.....
mataflakitas said:
wow you are amazing skeevy420 to try.....
Click to expand...
Click to collapse
Don't use the V2, I uploaded the wrong file. Its fixed now with 2.1 attached to the first post.
skeevy420 said:
Don't use the V2, I uploaded the wrong file. Its fixed now with 2.1 attached to the first post.
Click to expand...
Click to collapse
Ok your best friend I hope I will not have problems updating....
mataflakitas said:
Ok your best friend I hope I will not have problems updating....
Click to expand...
Click to collapse
You won't. The script crapped out on the first command.....I left in a single space and forgot to put () around the code. It was fixed on my phone when I tested it, but I uploaded my pc's first copy (which was bad) by mistake.
skeevy420 said:
You won't. The script crapped out on the first command.....I left in a single space and forgot to put () around the code. It was fixed on my phone when I tested it, but I uploaded my pc's first copy (which was bad) by mistake.
Click to expand...
Click to collapse
Ok best friend did not move to my device I am a newbie and do not want to damage it ....
skeevy420 friend buy my wife a cell phone is locked you can help me unlock it, now I live in mexico the phone is a Samsung 4G Exhibit II, or I can assign any web page that does not cost
mataflakitas said:
Ok best friend did not move to my device I am a newbie and do not want to damage it ....
It won't damage it. In fact, you'll get really good battery with it. I really recommend using this.
skeevy420 friend buy my wife a cell phone is locked you can help me unlock it, now I live in mexico the phone is a Samsung 4G Exhibit II, or I can assign any web page that does not cost
Click to expand...
Click to collapse
If it requires calling ATT then no, I don't have the account's password.
skeevy420 said:
If it requires calling ATT then no, I don't have the account's password.
Click to expand...
Click to collapse
skeevy420 the company's phone is T-MOBILE
You know someone from that company
mataflakitas said:
skeevy420 the company's phone is T-MOBILE
You know someone from that company
Click to expand...
Click to collapse
No, only Verizon. But she's my friend's wife and a total ***** who wouldn't help.
skeevy420 said:
No, only Verizon. But she's my friend's wife and a total ***** who wouldn't help.
Click to expand...
Click to collapse
jajaja do not worry I hope to find someone who can help me...
I figured that I'd let you all know that Epsylon3 is going to add BOOSTEDassV2 (boosted) to the bootmenu, and its already supported with his Touch Recovery. No eta on anything, but its good news.
I'm loving the BOOSTEDassV2 governor! I have my voltages a bit high right now and I'm still getting great battery life with the really slick scaling. Thanks a ton for these!
sdrawkcab3 said:
I'm loving the BOOSTEDassV2 governor! I have my voltages a bit high right now and I'm still getting great battery life with the really slick scaling. Thanks a ton for these!
Click to expand...
Click to collapse
Me too. I was using them for about a week before I released them. I didn't realize how good they were until I installed CM9 2012\05\12 without them and used conservative. Boosetdass stock runs more efficient and smoother than a heavily tweaked conservative (which I usually get good results with).
I'm just glad that they picked up support from Epsylon3.
I'm currently working on an init script to tweak the BOOSTEDassV2 and smartassv2 settings like the other governors have in the bootmenu. Placing them in 04govandio causes boot to freeze, so I'm gonna make a 98govloader (pick governor) 99asstweaker (tweak smart\boosted) and go from there.
While Epsy is adding them into the bootmenu, there's no telling when Quarx will merge in those changes and provide a new build with them. Besides, its nice having a script that's easy to edit.
skeevy420 said:
Me too. I was using them for about a week before I released them. I didn't realize how good they were until I installed CM9 2012\05\12 without them and used conservative. Boosetdass stock runs more efficient and smoother than a heavily tweaked conservative (which I usually get good results with).
I'm just glad that they picked up support from Epsylon3.
I'm currently working on an init script to tweak the BOOSTEDassV2 and smartassv2 settings like the other governors have in the bootmenu. Placing them in 04govandio causes boot to freeze, so I'm gonna make a 98govloader (pick governor) 99asstweaker (tweak smart\boosted) and go from there.
While Epsy is adding them into the bootmenu, there's no telling when Quarx will merge in those changes and provide a new build with them. Besides, its nice having a script that's easy to edit.
Click to expand...
Click to collapse
skeevy420 wow I have really wanted to try that on my motorola bravo....
New version up.
Removed blank bootmenu folder--caused Touch Recovery issues
Cleaned up init script to almost match Epsylon3's new overclock script
Removed unsupported lines from init script
Added all Bravo SIO commands into init script
Added SD Card Cache Tweak
skeevy420 said:
New version up.
Removed blank bootmenu folder--caused Touch Recovery issues
Cleaned up init script to almost match Epsylon3's new overclock script
Removed unsupported lines from init script
Added all Bravo SIO commands into init script
Added SD Card Cache Tweak
Click to expand...
Click to collapse
skeevy420 which I recommend you smartassv2 governor or BOOSTEDassV2 ...?
mataflakitas said:
skeevy420 which I recommend you smartassv2 governor or BOOSTEDassV2 ...?
Click to expand...
Click to collapse
BOOSTEDassV2
On another note -- I managed to fully compile Patchrom MIUI v4 with Quarx CM9 2012\05\12, but ALL MIUI apps force close. It does fully boot, but it doesn't work....Damn I wish I knew just a bit more about coding.
skeevy420 said:
BOOSTEDassV2
On another note -- I managed to fully compile Patchrom MIUI v4 with Quarx CM9 2012\05\12, but ALL MIUI apps force close. It does fully boot, but it doesn't work....Damn I wish I knew just a bit more about coding.
Click to expand...
Click to collapse
We skeevy420 sure that you can not ask for help to master wajik
mataflakitas said:
We skeevy420 sure that you can not ask for help to master wajik
Click to expand...
Click to collapse
I sent him a few PM's with no response back; same with Quarx, but not about MIUI.
skeevy420 said:
I sent him a few PM's with no response back; same with Quarx, but not about MIUI.
Click to expand...
Click to collapse
skeevy420 no longer carries the [ROM] [MIUI] Pikachu Edition 2.4.20b * Rom For Lovers *
because....
Related
First is an O/C kernel that I built from the HTC source. This kernel is stable and with the right profiles setup in setCPU has given me very good battery life. I'm giving coolbho3000 credit here as his post in the G2 forums is what helped me to do this. I am also acknowledging gr8gorilla who helped me several times through this process. Second is a kernel built from the latest CM kernel zource from zinx. It has proven to be very stable (after tweaking the voltages).
Now for the boring part ... If you choose to flash this you do it at your own risk. I am in no way, shape, or form responsible if you flash this and your phone turns into a paperweight. Once again, flash this at your own risk.
There, now that that is out of the way we can get on to the good stuff.
Make sure you choose the right kernel. The stock kernel will break your CM install if you flash it.
Kernels for Stock and Stock based roms
Kernel 2.6.32.21grankin010OC0v0.05
http://t1mgmaps.com/file.php?id=24
Md5Sum: 72c3430177eeefc6ff4b2c658efa0949
Features:
adb root enabled by default
system set r/w at boot (no need to remount)
voltages tweaked
cacheflush hack from zodttd integrated
noatime for better FS performance
Kernel 2.6.32.21grankin01-OC-v0.04
http://t1mgmaps.com/file.php?id=20
Md5Sum: a8668bdb2c1c7ca6ef0d9fbdafbe6969
Features(+v0.03):
Same features as v03 but with different voltages
Kernel 2.6.32.21grankin-OC-v0.03
http://t1mgmaps.com/file.php?id=19
Md5Sum: a82111399a9a4d570def14dce563a073
Features(+v0.01):
Voltages tweaked - Hopefully this one is more stable for you guys.
Kernel 2.6.32.21grankin01-OC-v0.02
http://www.mediafire.com/?o216o3b6jea13f9
Md5Sum: 2fdcde29532339743f0c41daae32db7f
Features(+v0.01):
O/C'd to 1.8Ghz with several intermediate clock speeds
Voltages for 1.7Ghz have been turned up a little bit to address stability concerns
Kernel 2.6.32.21grankin01-OC-v0.01
http://www.mediafire.com/?bqbdgb38m15n789
Md5Sum: af73907d0f9d8fbc1b5dcc41ea6b9552
Features:
Ext4 support (if you want to play with it)
O/C'd to 1.7Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Kernels for CyanogenMod and MIUI
Do not use these with CM7-GB. They will not boot properly.
Kernel_grankin01-CM-OC-v0.10
http://t1mgmaps.com/file.php?id=26
Md5Sum: 6c4f5b18ca5509cc83cf5eac0667b3e0
Features:
Same as v09 but video works
Kernel_grankin01-CM-OC-v0.09
http://t1mgmaps.com/file.php?id=25
Md5Sum: 63bcc734bf33cb30eb0dd335f807bf10
Features(+v0.08):
Wifi is fixed in this release
Kernel 2.6.32.27grankin01-CM-OC-v0.08
http://www.mediafire.com/?4hs3ix1b8rdmz36
Md5Sum: 7822eb4dcf547d712c455c72c83d4118
Features:
Noatime for better FS performance
Cacheflush hack by zodttd is integrated
Voltages have been tweaked (again )
Inludes all the standard features also
Kernel 2.6.32.27grankin01-CM-OC-v0.07
http://t1mgmaps.com/file.php?id=18
Md5Sum: 9273d9405e6bdb76f754c96916e36262
Features(+0.06):
System Permanent R/W Fix (edited code in v06 and left that out ... oops)
Video is fixed
Voltages changed (hopefully for better battery life)
Kernel 2.6.32.27grankin01-CM-OC-v0.06
http://t1mgmaps.com/file.php?id=17
Md5Sum: 55f04250126b6763db2f180b2829e4ac
Features(+0.05):
Newest Bluetooth fixes
Newest Video fixes - broken/missing code
System Permanent R/W - Broken (edited code and left that out ... oops)
Kernel 2.6.32.27grankin01-CM-OC-v0.05
http://t1mgmaps.com/file.php?id=16
Md5Sum: 026e5717311fa42da073ac8a9fc442d5
Features(+0.03):
Bluetooth fix
Charge issue fix
Kernel 2.6.32.27grankin01-CM-OC-v0.03
http://www.mediafire.com/?3g6yv8g9ypsu953
Md5Sum: 0424f5565387f86818c1e67ff636443e
Features(+v0.02):
New version of kernel includes fix for video
Kernel 2.6.32.27grankin01-CM-OC-v0.02
http://www.mediafire.com/?jsux5wtj7mgcvzo
Md5Sum: 8c243df7f53143a6a3be5292073f052b
Features:
Ext4 support (if you want to play with it)
O/C'd to 1.8Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)FIXED
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Interactive
CM7-Gingerbread Kernels
Do not use these with CM6-Froyo! They have different ramdisks and wifi options built in.
These kernels have no issue with video. If you are having trouble with youtube and such update your GB rom to one of the newest. There was a memory leak in the source for the rom itself that zinx has fixed. Thirty to Forty-Five minutes of straight youtube action and I had no problem at all.
Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09
http://t1mgmaps.com/file.php?id=29
Md5Sum: 7565340ac31ff7560d45ab42e043acc0
Features(+v0.08):
Changed voltages a tad
I get great battery life with light to moderate usage on this kernel
Kernel 2.6.32.27grankin01-CM-OC-v0.08-GB
http://t1mgmaps.com/file.php?id=22
Md5Sum: b7b5fde8db99a01d827c3b7fc81a387e
Features:
Noatime for better FS performance
Cacheflush hack by zodttd is integrated
Ext4 support (if you want to play with it)
O/C'd to 1.8Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Interactive
I have packaged this into an update.zip format that you can flash through your custom recovery. Simply choose to install a zip from the sdcard and pick the update package to install it. It will install the wifi driver at the same time so you don't need to worry about that. Everything works with this kernel so far for me if you have any problems please post them and I'll see what I can do to fix them.
Remember that you hardware is not the same as your neighbor's so while he may be able to max the settings out and run stable your device may need to be set to a lower clock speed to run stable.
Source code for both kernels has been added to github. If you want to play around with them download source from here: https://github.com/grankin01
Happy Modding/Devving!
wow, thank you sir
I was just about to start testing kernels with Zinx's CM6 anyway. Looks like yours is first.
hmmm... could not run update.zip through clockworkmod. I was looking to extract the files and push them manually, however, I don't see a zImage file to push.
No luck with the miui rom. Cant get past the splash screen.
Sent from my HTC Glacier using XDA App
monnietron said:
No luck with the miui rom. Cant get past the splash screen.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Yeah, its based off of CM. I'm working on one built fromthe CM source right now.
Christopher3712 said:
I was just about to start testing kernels with Zinx's CM6 anyway. Looks like yours is first.
hmmm... could not run update.zip through clockworkmod. I was looking to extract the files and push them manually, however, I don't see a zImage file to push.
Click to expand...
Click to collapse
There isn't a zimage. I wrapped it all up in its own boot.img and then packaged it in the update.zip with the wifi module.
Does this break the nightly CM ROM? I know gorilla's kernel does.
I appreciate your work!
TmobileDash12 said:
Does this break the nightly CM ROM? I know gorilla's kernel does.
I appreciate your work!
Click to expand...
Click to collapse
Yes, it breaks it horribly. I'm working on it now.
grankin01 said:
Here is an O/C kernel that I built from the HTC source. This kernel is stable and with the right profiles setup in setCPU has given me very good battery life. I'm giving coolbho3000 credit here as his post in the G2 forums is what helped me to do this. I am also acknowledging gr8gorilla who helped me several times through this process.
Click to expand...
Click to collapse
Thanks for this grankin01. Great work to you and the others involved.
So no miui or cm6 on this kernel correct I just dont wanna break anything.
Sent from my icey cold glacier 4g freezing every phone in its path.
jriv said:
So no miui or cm6 on this kernel correct I just dont wanna break anything.
Sent from my icey cold glacier 4g freezing every phone in its path.
Click to expand...
Click to collapse
Not yet. It will work with the rom that you have installed right now though.
hey guys. im a noob to android. every other phone i have had has been winmo. i wanted to try this oc kernel because it seems easier to install than the gorilla one. however i ran into a problem when installing. i have a stock rom 2.2.1, perm rooted s=off, using clockwork recovery. i backed up my rom and flashed via rom manager. it then began to send me into a boot loop never getting past the first screen. just kept turning off and rebooting. soooooo i rebooted directly into clockwork and tried to do it from there and the same thing happened. so i restored my recovery and now everything is back to normal. can anyone point me in the right direction? i did notice that in clockwork it gave me two options to flash the kernel or to flash an update from the sd card. should i have flashed the update zip instead of the kernel or flash both.. sorry im a partial noob. i know how to use adb a lil and the emulator, this is the first thing i flashed on my phone and nearly had a heart attack from thinking i was bricked! any help is appreciated
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
grankin01 said:
Not yet. It will work with the rom that you have installed right now though.
Click to expand...
Click to collapse
Oh I'm running miui now just haven't changed my sig lol
Sent from my icey cold glacier 4g freezing every phone in its path.
Can't wait for your kernel for CM! I wanna see my phone unleash its true power! Lol thanks dude.
Sent from my HTC Glacier using XDA App
grankin01 said:
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
Click to expand...
Click to collapse
thanks.... stupid me... duuhhh.... i have setcpu installed already and it is set at "set on boot".... thanks for the help man... will give it a go and let you know how that works out!
Edit: turning off set on boot in setcpu didnt work. still boot looped. i will try uninstalling setcpu, then flashing, then reinstalling. i dont get it though because my highest on setcpu is the stock 1024.... hmm maybe its the profiles i have set up... either way, gonna give it another go in a few. im gonna get this working today if its the last thing i do. so thankful for backups to restore lol
grankin01 said:
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
Click to expand...
Click to collapse
That's...retarded. I can't wait to see how that handles. lol! Are you incorporating U/V's on the lower frequencies as well?
UV / OC?
Is this a UV / OC kernel? Thanks for the help.
Christopher3712 said:
That's...retarded. I can't wait to see how that handles. lol! Are you incorporating U/V's on the lower frequencies as well?
Click to expand...
Click to collapse
Yes, and O/V's in the higher frequecies for stability. This one was picky.
InvisibleHero said:
Is this a UV / OC kernel? Thanks for the help.
Click to expand...
Click to collapse
Only in the lower frequencies. The higher frequencies weren't stable running lower voltages.
Thanks OP. When you say the lower ranges, at which MHz did you not UV? Just curious. I am thinking of not OC'ing more than 1.4MHz and didnt know if I would get the UV benefit.
*EDIT* Meant GHz
THIS KERNEL IS NOW OBSOLETE, DON'T USE IT.
Mine newest and stable kernel releases are now integrated into my version of CyanogenMod 7.2, please use only a kernel provided with that ROM, not this one.
Im leaving it for historical reason or for some geeks
The testing release of kernel for p350 based on kernel by drapalyuk - taken from kernel and rom + sources
I do not take any resposibility for bricked devices!
This kernel aims to optimize the performance, responsivity and battery life so please share your opinion about these factors and your ideas.
If you are experiencing any problems with WiFi or 3G try much less tweaked but more stable LITE version.
Instalation:
Download zip to your phone
Get the Custom Recovery for p350
Reboot into recovery
Backup your boot partition (if you like risk you can ommit this step )
Choose Flash zip menu
Turn off verification (as I dont signed my kernel yet)
Flash downloaded zip
Reboot and enjoy
Changelog(2.6.32.48 version):
[0.4]
Fixed black screen after wakeup issue
Added vr and sio I/O schedulers (SIO is default)
Added smartassv2 governor
VM_MAX_READAHEAD changed to 512
[0.3]
Kernel version updated to 2.6.32.48
BFS CPU Scheduler
Applied few tweaks from https://github.com/arco/buzz-kernel-2.6.32/
Some other small tweaks (List of applied patches is on github)
Compiled with newest Linaro toolchain with -Ofast flag and tuned to our architecture
LITE version:
For all guys having problems with internet connection on my kernel there is a LITE version.
It contains less tweaks thant normal version but should not have problems with internet. This version is much less tweaked so it should be more stable.
What is in lite version:
Kernel version 2.6.32.9 (not updated)
Smartass v2 governor
SIO and VR IO schedulers (SIO as default)
VM_MAX_READAHEAD changed to 512
Compiled with newest Linaro toolchain with -Ofast flag and tuned to our architecture
If you dont have any problems with 0.4 version I reccomend NOT to install Lite version
DOWNLOADS
version v0.4: http://hotfile.com/links/139705983/d792c47/kernel-pax-0-4.zip.html
version Lite: http://hotfile.com/links/139705851/518d0ef/pax0r-kernel-lite.zip.html
SOURCE: https://github.com/pax0r/pecan_kernel
Thx for:
drapalyuk - for biggest work for this device
All other devs for Android kernel - as I can learn so much from all of your work!
Debuging Info
or how to help make it better
If you have any problems with my kernel and you want to help in some way - here it is some info how you can.
Just after apearing of the problem please get logs from your device.
How to do it:
Info on CM wiki how to get Logcat
http://wiki.cyanogenmod.com/wiki/Logcat
Info about getting kmesg:
Open Terminal Emulator (or shell with ADB if you know how)
Write the following commands:
Code:
su
cat /proc/kmsg > /sdcard/kmsg.log
There should be new file kmsg.txt on your sdcard. Copy it to your PC.
info about last kmsg after sudden reboot/crash
Same as for normal kmesg but the command now should be:
Code:
su
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
Created file will be named last_kmsg.txt
Attach all logs to your post (prefered way is to use http://pastebin.com/
Of course if you have any programming skills you can tinker with my sources as you wish and send patches to me
Hi Pax0r,
I will test the new kernel!
Great, file not found
Sent from my Optimus Me using XDA App
thanks from the Philippines bro..
downloading it now.. will let you know how it goes..
edit : just booted up and already like it.. i had a problem with drape's rc3 kernel because everytime my phone went to sleep and i would wake it up, the screen would just stay black and the buttons would light up and i would have to touch the screen for it to turn on.. now that problem is history!!! thanks paxor!!!!
SikatPimp said:
edit : just booted up and already like it.. i had a problem with drape's rc3 kernel because everytime my phone went to sleep and i would wake it up, the screen would just stay black and the buttons would light up and i would have to touch the screen for it to turn on.. now that problem is history!!! thanks paxor!!!!
Click to expand...
Click to collapse
i still experience that problem. well after the kernel's flashed, does that mean it will run the next time the phone's booted up?
downloading...
edit:screen stays black like before..
uploaded to mediafire
Daryll99 said:
Great, file not found
Sent from my Optimus Me using XDA App
Click to expand...
Click to collapse
here..i uploaded it to mediafire. enjoy
www . mediafire . com/ ?l5cqpdhvi8c8acw
ikazu said:
i still experience that problem. well after the kernel's flashed, does that mean it will run the next time the phone's booted up?
Click to expand...
Click to collapse
ok i just got excited. it seems i still get the touch screen problem but it happens less frequently now and right now i am also cruising at 825 mhz with no fc yet !!!
SikatPimp said:
ok i just got excited. it seems i still get the touch screen problem but it happens less frequently now and right now i am also cruising at 825 mhz with no fc yet !!!
Click to expand...
Click to collapse
tried playing games with 825 freq?
---------- Post added at 05:23 AM ---------- Previous post was at 05:21 AM ----------
on screen animation dsnt work either
Thx for feedback.
I also noticed the 'black screen issue' sometimes and working on it. Drapalyuk fixed it in CM but its not in his sources :/
What versions of ROM (CM, 2.2 etc) do you use?
only angry birds... can't tell any difference but still no fc
---------- Post added at 02:17 PM ---------- Previous post was at 02:08 PM ----------
I'm using drape's 20.10 rom... and before i would reflash to try and get that black screen took care of but in a couple days it would come back.. and it isnt so bad.. it doesn't really effect anything.. but after flashing your kernel i am getting them less now so thats a plus..
So you know How to compile the kernel
will you try to add more features ???
can you add these features
Code:
* shifted to TinyRCU kept it as default
* enabled support for various file systems
o EXT3
o EXT4
o JBD
o RFS
o JFS
o NTFS (with R/W)
* TUN/TAP now integrated into kernel
* enabled support for various network file systems
o NFS (client/server)
o CIFS
* optimized kernel for size
* enabled LZMA/GZ2/LZO compressing support for ramdisk
* bumped jHash to v3
* increased VM MAX READAHEAD to 512KB
* corrected "current kernel" string in CWM app & Tweaks app
* Universal CF-Root and CWM for I9003 Gingerbread by amit.bagaria
* CPU Governors
1. InteractiveX
2. Savaged-Zen
3. SmartAssV2
4. BrazilianWax
5. Smoothass
6. Lagfree
7. Smartass
8. Scary
9. MinMax
10. Interactive
* I/O Schedulers
1. BFQ-v2-rc1
2. V(R)
3. SIO
I flashed the kernel and now everytime i try to turn on the wifi its says error, it wont turn on. And please fix the blackscreen issue.
Daryll99 said:
I flashed the kernel and now everytime i try to turn on the wifi its says error, it wont turn on. And please fix the blackscreen issue.
Click to expand...
Click to collapse
Maybe try flash again.
If it would not work I will check on this issue later.
There must be some problem with loading wifi module for your phone...
vivekkalady said:
So you know How to compile the kernel
will you try to add more features ???
can you add these features
Code:
* shifted to TinyRCU kept it as default
* enabled support for various file systems
o EXT3
o EXT4
o JBD
o RFS
o JFS
o NTFS (with R/W)
* TUN/TAP now integrated into kernel
* enabled support for various network file systems
o NFS (client/server)
o CIFS
* optimized kernel for size
* enabled LZMA/GZ2/LZO compressing support for ramdisk
* bumped jHash to v3
* increased VM MAX READAHEAD to 512KB
* corrected "current kernel" string in CWM app & Tweaks app
* Universal CF-Root and CWM for I9003 Gingerbread by amit.bagaria
* CPU Governors
1. InteractiveX
2. Savaged-Zen
3. SmartAssV2
4. BrazilianWax
5. Smoothass
6. Lagfree
7. Smartass
8. Scary
9. MinMax
10. Interactive
* I/O Schedulers
1. BFQ-v2-rc1
2. V(R)
3. SIO
Click to expand...
Click to collapse
I will try do as much as I can - thx for some kind of list of 'thigs I should look at'. Few comments I have:
About governors - there will be smartass v2 for sure in next version - I just hadnt time to integrate it in this release (I tested it earlier at it really was smartass )
I/O Schedulers - deadline is quite enough for sd cards, but I will look into this SIO as it is based on deadline - thx for hint. I think rest of them is not needed.
File Systems - do we really need support for them? More supported format means bigger kernel.
"optimized kernel for size" - I prefer optimize for speed and it is done
Thanks again for this list - looks very interesting
Havent find the Governer in the cyanogen Mod ??
do I have to use external apps to select that governer??
edit : wifi working Fine
vivekkalady said:
Havent find the Governer in the cyanogen Mod ??
do I have to use external apps to select that governer??
edit : wifi working Fine
Click to expand...
Click to collapse
The governor does not come with the cyanogen mod ofLG p350. No you can't use external apps to install that governor,assuming it is smartass
Sent from my Optimus Me using XDA App
pax0r said:
File Systems - do we really need support for them? More supported format means bigger kernel.
Click to expand...
Click to collapse
It would be great if ntfs file system is supported as it is fast
Sent from my Optimus Me using XDA App
Daryll99 said:
The governor does not come with the cyanogen mod ofLG p350. No you can't use external apps to install that governor,assuming it is smartass
Sent from my Optimus Me using XDA App
Click to expand...
Click to collapse
I know that Dude
But we need external apps to select which Governer and I/O scheduler to be used even if it is in the boot.img. Not installing but selecting
no-frill app is used in my phone (i9003) it contains all the above items in the list i have specified earlier
Its from i9003 by doomload it contains all the things
https://github.com/DooMLoRD/SGS-SL-i9003
Hm... I can select governor from CM menu (performance -> CPU settings - not sure about english names ; ) but be aware of a fact that there is no smartass here (yet ), just standard ones (ondemand,usersapce,powersave,performance)
Sadly your kernel from i9003 is .35 one an here we have .32 so patches do not apply so easy...
But when I will have more time (Im in the middle of Bsc thesis ) I will try to port some .35 kernel for p350
Hi everybody. First of all I'm not developer. I just compile the latest 3.0.50 Virtuous Kernel with smartassV2 and lazy governors for myself but I decide to share it. I was really surprised when I saw only vanilla governors without the new modern and fancy smartass, lagfree, interactivex etc. On my old G1 smartassV2 give really good improve.
If someone doesnt know what are the governors in kernel - please read here.
If somebody wants to test it I will appreciate a lot some feedback. If the result from test isn't so satisfying I will pimp a bit the governor for more battery friendly settings.
My final idea is to pull the kernel with more from the good governors lagree, interactiveX and maybe Intellidemand and then to make pull request. I'm open for feedback and suggestions before commiting the changes.
Install:
Download kernel_with_governors.zip for sense roms and place it on sdcard. Flash into recovery. It's all! Enjoy of your new governors.
Change the covernor:
I recommend for changing the governors using of No-frills CPU Control , AnTuTu CPU Master (both of apps allow scheduler changing) or SetCPU ( search in forum for free version or donate in the market )
Setup:
I feel best performance with smartassV2 governor and deadline scheduler!
My Sources
My GitHUB
update 01.10:
Kernel code name "Hushi" - this kernel deserve some name
Implement DMA Buf - the biggest change in this release. More about Buffer Management
A lot of patches - For more info checkout my github
update 15.08:
Switch to SLOB allocator instead of SLAB
Used latest CB toolchain
update 30.06:
Added force fast charge patch!
notes to get it working :
1 Install Fast Charge app /it is free/
2. The most important - toggle fast charge on and then plug the pc cable otherwise fast charging don't work! /don't be noob like me/
update 24.06:
Added Row Scheduler
Added FIFO Scheduler
update 08.03:
Updated cpu frequency
Added patch to allow lower wifi signals
update 13.01:
Added Lionheart governor
Added interactiveX governor
Added patch for enable swaptoken only when swap is full
Build with CB toolchain instead of linaro
update 12.01:
SmartassV2 governor is set to be default instead ondemand
Added lagfree governor
Enabled BFQ scheduler by request
Added Patch for release swapcache more aggressively
Reboot phone 5 sec after update the kernel
Thanks to:
Linus Torvalds
Virtous Team
yozgatg
-ck
Linaro Team
Sourcery CodeBench
ps I get the kernel sources from yozgatg's git if somebody know more recent repository please to tell me.
ps2 Please have in mind - the zip isn't signed.
hey thanks for the added governors, in the gen y visionx r3 thread qriozum posted a compiled kernel that was v3.0.56.1 post #1489 you could probably ask him where his git is. also if you could, it would be nice to see a kernel with 2 way call recording, as i have heard that its easy to implement in the kernel.. but thanks for this.
btw, just saw that in his sig he has 3.0.57, also check his post history.
also, if you could include the new bfq scheduler and allow the minimum clock speed to be set to 128mhz, that'd be great. thanks!
pyrorob said:
hey thanks for the added governors, in the gen y visionx r3 thread qriozum posted a compiled kernel that was v3.0.56.1 post #1489 you could probably ask him where his git is. also if you could, it would be nice to see a kernel with 2 way call recording, as i have heard that its easy to implement in the kernel.. but thanks for this.
btw, just saw that in his sig he has 3.0.57, also check his post history.
also, if you could include the new bfq scheduler and allow the minimum clock speed to be set to 128mhz, that'd be great. thanks!
Click to expand...
Click to collapse
Thanks for reply. I will ask qriozum for the newer sources For the scheduler I don’t think the bfq is good chose because noop and deadline are more battery frendly than it, or if you use swap cfq work better with swap defragmentation For minimum clock speed I must research more if this is possible Thanks again.
Thanks for making this
Is this kernel flashable on aokp vision milestone 6 (ICS 4.0.4) since it has 2.6.35.14 kernel?
Thanks
ilbeppez said:
Thanks for making this
Is this kernel flashable on aokp vision milestone 6 (ICS 4.0.4) since it has 2.6.35.14 kernel?
Thanks
Click to expand...
Click to collapse
I thins so. I use gen y visionx r3 (ICS 4.0.4). Try it but make backup before flash just in case
Thanks, have this kernel running with viperZ rom. It respons very wel, seems more stable. Will test for some days
ineedone said:
Thanks, have this kernel running with viperZ rom. It respons very wel, seems more stable. Will test for some days
Click to expand...
Click to collapse
Great, I don’t have really good experience with viperZ rom. For me was a bit slow and laggy I planning to improve few options tonight for more performance but first I will test them.
I don't know if Virtuous Kernel maybe it's only for Sense based roms and not AOSP like cyanogen / aokp..
someone already tried this on other aosp roms?
ilbeppez said:
I don't know if Virtuous Kernel maybe it's only for Sense based roms and not AOSP like cyanogen / aokp..
someone already tried this on other aosp roms?
Click to expand...
Click to collapse
I dont think so. But if you are disturbed about it the safest way is to do backup in the recovery and if something goes wrong just restore the backup I rarely test new roms but before flash every time I make fresh backup of my current rom if I dont like the new one restoring is easy
there are big differences between sense-kernel and aosp-kernel... shouldn't work without trouble!
alexinc said:
there are big differences between sense-kernel and aosp-kernel... shouldn't work without trouble!
Click to expand...
Click to collapse
Huh sad news in this case. Can you give me something to see more about those differences?
Neo2SHYAlien said:
planning to improve few options tonight for more performance but first I will test them.
Click to expand...
Click to collapse
Lookin forward to it. Can you tell me what tweaks you've used?
I've not yet supercharged it , do you think this is a good idea, give improvement? Will try anyway just want your opinion
ineedone said:
Lookin forward to it. Can you tell me what tweaks you've used?
I've not yet supercharged it , do you think this is a good idea, give improvement? Will try anyway just want your opinion
Click to expand...
Click to collapse
Fo sho big :good: for supercharging. I use it from very log time About the improvements are only kernel related - first i will remove some unnecessary options like himem support( it's needed for system with 4G and more ram ) and some formats this will decrease a bit size and boot time(aron few ms), also I will play with CONFIG_HZ value and enabling of sysvipc, cgroups and bfq scheduler too
Beastmode mod kernel
Here is the github for beastmode mod kernel :
https://github.com/thachtunganh/beastmode-1.5/
Try compiling it for vision.
Updates and so...
Updated version with lagfree governor, BFQ scheduler and patch for Patch for release swapcache more aggressively is available.
For next version i plan to add ck's Brain **** Scheduler (BFS), interactiveX governor and some ck's memory and swap management patches.
All feedbacks and suggestions are welcome!
ajhavery said:
Here is the github for beastmode mod kernel :
https://github.com/thachtunganh/beastmode-1.5/
Try compiling it for vision.
Click to expand...
Click to collapse
I will try but right now I don't have enough time for solving drivers issues ( actually I'm weak kernel dev ). Thanks for source.
There is also a thread for the Beast Mode Kernel in DHD section, seems to be very interesting. Might help as well.
http://forum.xda-developers.com/showthread.php?t=2049368
[KERNEL][GPL][3.0.y][Beast Mode MOD][v0.4][30/12/2012]
Sent from my HTC Desire Z using xda app-developers app
olobex said:
There is also a thread for the Beast Mode Kernel in DHD section, seems to be very interesting. Might help as well.
http://forum.xda-developers.com/showthread.php?t=2049368
[KERNEL][GPL][3.0.y][Beast Mode MOD][v0.4][30/12/2012]
Sent from my HTC Desire Z using xda app-developers app
Click to expand...
Click to collapse
Thanks. Yes in quick view I saw a lot interesting things, later will dig more deep in the thread.
I just flashed this kernel on my DZ with aokp,
booted and restarted like the description,
testing it right now
ok data / phone works,
wifi is not activable, not working at all
I'll remove the battery and reboot.
edit nothing to do, still not working,
the toggle in notification bar is grey out and i'm having now the text scrambled on all icons.
I'm restoring
I think it's because this kernel is for sense based roms.
Maybe you sould try to compile this from cyanogen : http://forum.xda-developers.com/showthread.php?t=1492461
source here : https://github.com/jerl92/htc7x30-3.0
thanks
Can this kernel work with virtuous sense 2.0 gb??
Sent from my HTC Vision using xda app-developers app
ilbeppez said:
I just flashed this kernel on my DZ with aokp,
booted and restarted like the description,
testing it right now
ok data / phone works,
wifi is not activable, not working at all
I'll remove the battery and reboot.
edit nothing to do, still not working,
the toggle in notification bar is grey out and i'm having now the text scrambled on all icons.
I'm restoring
I think it's because this kernel is for sense based roms.
Maybe you sould try to compile this from cyanogen : http://forum.xda-developers.com/showthread.php?t=1492461
source here : https://github.com/jerl92/htc7x30-3.0
thanks
Click to expand...
Click to collapse
Sad news but will be easy to add all modifications to jerl92's repo. Expect soon version and for aokp Can I ask you for your /proc/config.gz file?? I have need to see compilation options for this kernel maybe and the are different too.
Steven How said:
Can this kernel work with virtuous sense 2.0 gb??
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
I don't think so. This is kernel for ICS. If you want test with backup and feedback, but I expect issues with GB roms
Hello xda,
CAMERA PATCH FOR ALL CM11
http://www.mediafire.com/download/5lw858r2ctqakd0/VideoRecordingPatch+FOR+GIO.zip
FINAL RELEASE: https://www.mediafire.com/folder/cpra0qbzxn4k4/FINAL_RELEASE
RELEASE 4.5: https://www.mediafire.com/?gd5ampsaafmrjga
RELEASE 4: https://www.mediafire.com/?8rc4wblbymy00k2
RELEASE 3: https://www.mediafire.com/?dmicnl8wnj7fyjx
I got the cpu step!
LINK: http://www.mediafire.com/download/8a67jkv4rs93x43/cm-11-20150328-UNOFFICIAL-gio+WITH+KERNEL.zip
As I promised
LINK: http://www.mediafire.com/download/b07mqnqrqmbxgbl/cm-11-20150328-UNOFFICIAL-gio.zip
Changelog:
FINAL:
Full Cyanogenmod code sync
New audio decoder (No idea)
Two Version (MSM, MSM7x27)
5/9/2015
Fix Camera recording
4/17/2015:
(RELEASE 4.5)
ADDED CPU GOVERNORS AND I/O SCHEDULERS
-Badass
-SmartassH3
-SmartassV2
I/O
-Sio
-Sioplus
(RELEASE 4)
Switched to Cm12 kernel (Net improvements, but still Cm11)
Updated Cyanogenmod Sources
4/06/2015: (RELEASE 3): Changed Cpu steps, added cpu governors, and added I/O schedulers
3/28/2015: Added cpu steps
3/28/2015 Initial Release
NOTES:
(RELEASE 4)
I need to re add all of the kernel governors and I/O schedulers.
What I noticed so far is loading website is much faster
(RELEASE 3)
CPU Governor added:
-SMARTASSV2
-SMARTASSH3
-BADASS with some algorithm
I/O Scheduler added:
-SIO
-SIOPLUS
-removed zen because I find it makes the phone slower and crappy battery
Thanks to @belyava for added gapps to my build. Here is the links to post 44
http://forum.xda-developers.com/showpost.php?p=59892898&postcount=44
Credits:
ME!
androidarmv6 for kernel and cyanogenmod
Kernel Source: https://github.com/HerroYou/android_kernel_samsung_msm
KERNEL: 3.0.31
Working:
Everything for the most part
BUGS: You tell me
*** Fixed Terminal issue
1. Backlights doesn't work
2. Video recording doesn't work (FIXED)
ISSUES: Can not pause recording, other than that it works!
FAQ:
- To enable Performance/Developer settings go to "About Phone" and tab the build number until it says "You are now a developer"
-To fix music stutter raise minimum cpu frequency to 245
I will upload a new build after I get the cpu steps to work
Release #2!
Download links fixed
100 downloads and no feed back?
And I might release something new this weekend, if I have the time.
HerroYou said:
100 downloads and no feed back?
And I might release something new this weekend, if I have the time.
Click to expand...
Click to collapse
I flashed this ROM the other day, but I couldn't stick to it because it's slow and buggy. The 3.0 kernel has not improved the ROM's perfomance. Thanks for your affords
Without gapps installed your ROM works great! no noticable lag.
From the convo in the Slim thread I have 113MB free internal space so I don't think that's the problem...
belyava said:
I flashed this ROM the other day, but I couldn't stick to it because it's slow and buggy. The 3.0 kernel has not improved the ROM's perfomance. Thanks for your affords
Click to expand...
Click to collapse
I need to put some governors into the kernel to improve performance. You enable SD swap for some more performance
orangejuice43 said:
Without gapps installed your ROM works great! no noticable lag.
From the convo in the Slim thread I have 113MB free internal space so I don't think that's the problem...
Click to expand...
Click to collapse
Check "About phone, Partition info, System."
I found a bug, video recording doesn't work.
HerroYou said:
I need to put some governors into the kernel to improve performance. You enable SD swap for some more performance
Click to expand...
Click to collapse
As stated by spyke83, Sd swap when enabled leads to random reboots. Since then I always disable it. More governors doesn't mean better performance
belyava said:
As stated by spyke83, Sd swap when enabled leads to random reboots. Since then I always disable it. More governors doesn't mean better performance
Click to expand...
Click to collapse
It doesn't reboot for me since I set it to 20% and I only added 3 governors: Smartassv2, SmartassH3, and badass with some I/O scheduler: Sio, and Zen.
And with the governor badass I added some power saving algorithm
HerroYou said:
It doesn't reboot for me since I set it to 20% and I only added 3 governors: Smartassv2, SmartassH3, and badass with some I/O scheduler: Sio, and Zen.
And with the governor badass I added some power saving algorithm
Click to expand...
Click to collapse
Alrighty, sounds good. May be you could also take a look at bug when Google Play Services are being stopped?
belyava said:
Alrighty, sounds good. May be you could also take a look at bug when Google Play Services are being stopped?
Click to expand...
Click to collapse
I never had that bug? The way that I install gapps is:
1. I install link2sd premium and connect it to my 2nd partion of 512 mb
2. turn on wifi and reboot to recovery
3. Install mardon's gapps
4. after booting turn off wifi and tell link2sd to move the google player service to the 2nd partion (move app to sd and link it)
5. Turn on wifi login
HerroYou said:
I never had that bug? The way that I install gapps is:
1. I install link2sd premium and connect it to my 2nd partion of 512 mb
2. turn on wifi and reboot to recovery
3. Install mardon's gapps
4. after booting turn off wifi and tell link2sd to move the google player service to the 2nd partion (move app to sd and link it)
5. Turn on wifi login
Click to expand...
Click to collapse
Installing gapps is not the problem. The issue comes up when when your Google Services and the Play store get updated. Then installing every app leads to a "Unfortunatelly, Google Services has stopped!" message. Wiping data and deleting the Google account doesn't help
HerroYou said:
Check "About phone, Partition info, System."
Click to expand...
Click to collapse
Oh right ok,
/System says 184MB / 206MB
So yes, it looks like there's not much space!
I guess I will try your method of installing gapps from above. I assume I just find an apk online of link2sd and install manually?
Thanks
orangejuice43 said:
Oh right ok,
/System says 184MB / 206MB
So yes, it looks like there's not much space!
I guess I will try your method of installing gapps from above. I assume I just find an apk online of link2sd and install manually?
Thanks
Click to expand...
Click to collapse
Link2SD won't link system apps. It links user (in /data) apps only
belyava said:
Link2SD won't link system apps. It links user (in /data) apps only
Click to expand...
Click to collapse
Oh right, so any idea how I would get this working?
Thank you!
Welcome To NegaLite HW+ Kernel!!!
I AM NOT RESPONSIBLE FOR ANY DAMAGES! Use At Your Own Risk!
This Also Voids Your Warranty!
Features:
F2FS Support(Module) - Big Thanks To r3pwn
GCC Uber 4.9.4 Toolchain
-o3 Optimized
Turbo 4x Zram(Module)
msm_hotplug
All Governors Boosted
CPU OC Up To 1.3 Ghz
GPU OC Up To 533MHz
FSB UC To 320MHz
Undervolted - 25mv Lower
All Cores Active
init.d Support
Configurable Tweak Scripts
Sysctl Tweaks
Memory Tweaks
Build.prop Tweaks
Busybox 1.27.0 Included
ADB Debugging Auto Enabled
Auto-Root Included
Kernel Adiutor 4 Wear App Included
Scripts Included In Source For Simple Compiling(Build The Kernel Yourself If You Want)
Custom Governors:
Darkness, Intelliactive, Intellidemand, InteractiveX, PegasusQ, Smartmax, ThunderX
Custom Schedulers:
VR, SIO, FIOPS, FIFO And ZEN
------------------------------------------------------------------------------------------------------------------------------
Downloads:
Nothing Needs To Be Done Prior To Flashing!!!
Just Do This:
1. Push Zip To /sdcard/ Via ADB
2. Flash zip In Recovery
3. Done (Enjoy!)
WEAR 1.5(Marshmallow)
negalite_kernel_HW_7eca452-1.5.zip - 1/12/2017
WEAR 2.0(Nougat) - Official Release Compatible
negalite_kernel_HW_dffc4c0-2.0.zip - 6/7/2017
Commit Log:
https://github.com/Negamann303/Huawei-W-1.5-2.0/commits/master
------------------------------------------------------------------------------------------------------------------------------
Source: Huawei-W-1.5-2.0
Boot Battery/Performance!!!
Advanced Users: (Optional)
You Can Have Pre-Configured Settings On Kernel Flash
Download One Of The Zips Below
Rename To bootperf.zip
Push To Your SDcard
Flash The Latest Kernel
Enjoy!
Nega's Tweaks:
battery_v6_bootperf.zip - Battery Save - 8/03/2016
performance_v6_bootperf.zip - Performance(See What This BadBoy Can Do!) - 8/03/2016
PablosMule_bootperf.zip - Pablo71 Has You Covered, Make Sure To Thank Him!
On The Fly Config Switching
Push bootperf.zip And The Flasher.zip Below To SDCard And Use Flasher In Recovery
BootPerf_Flasher.zip
Download link doesn't seem to be working...
bmg1001 said:
Download link doesn't seem to be working...
Click to expand...
Click to collapse
Fixed, thanks
Thanks for your efforts. Link is broken bro.
Huawei-Watch-3.10-mr1 is it lollipop-wear-release-1?
janjan said:
Thanks for your efforts. Link is broken bro.
Huawei-Watch-3.10-mr1 is it lollipop-wear-release-1?
Click to expand...
Click to collapse
It should be fixed. This kernel is for Marshmallow
This seems interesting. Could you explain how I move .zip files to and from Wear?
I'm rooted with TWRP on wear, but got no USB mount. How do I then move the files?
Thanks in advance
---------- Post added at 08:57 AM ---------- Previous post was at 08:32 AM ----------
Trying the pull command, but saying it's read only
Faspaiso said:
This seems interesting. Could you explain how I move .zip files to and from Wear?
I'm rooted with TWRP on wear, but got no USB mount. How do I then move the files?
Thanks in advance
---------- Post added at 08:57 AM ---------- Previous post was at 08:32 AM ----------
Trying the pull command, but saying it's read only
Click to expand...
Click to collapse
Worked here. This is the exact command I used: adb push C:\Users\bmg10\Downloads\negalite_kernel_HW_r99c9f93.zip /sdcard/
Did you set TWRP to allow system modifications?
bmg1001 said:
Worked here. This is the exact command I used: adb push C:\Users\bmg10\Downloads\negalite_kernel_HW_r99c9f93.zip /sdcard/
Did you set TWRP to allow system modifications?
Click to expand...
Click to collapse
Was just pushing from standard ADB. Not in TWRP. Suddenly it worked. But thanks
I currently run skin1980's MM kernel ... can I just flash this over it out should I wipe everything? thanks this looks awesome
pablo71 said:
I currently run skin1980's MM kernel ... can I just flash this over it out should I wipe everything? thanks this looks awesome
Click to expand...
Click to collapse
No prerequisites, just flash
Sent from my SM-G935P using Tapatalk
negamann303 said:
No prerequisites, just flash
Click to expand...
Click to collapse
awesome ... zip file loaded to sdcard and rebooting to recovery to flash here we go ... thanks
So far so good! Watch is running really fast and smooth and battery seems to be a bit better than what I got on Skin's kernel, but that might also be cause I factory reset my device when I flashed the kernel (since I was running Skin's kernel before). No issues like random reboots or crashes either. I haven't modified any kernel settings yet though.
Holy sh!t
Thanks!
This is the smoothest experience I have had on this watch so far and I've used all of the things!
loving this kernel to a high degree so far ... it was damn thoughtful of you to include kernel adiutor and make it flashable in recovery. the selection of governors, hotplug profiles and i/o schedulers is top notch (I'm no expert on these matters though I know just a small amount)
Early observations: on your stock settings both my watches don't like waking up on tilt to wake, they usually require a double-tilt to wake up and one watch even locked up and required a reboot BUT adjusting some settings fixed this instantly. I point out though that I did not do a factory reset or wipe any partitions or caches before installing this kernel. I just flashed and started having fun.
currently I'm getting VERY satisfactory performance with the cpu's frequency locked at 787mhz + interactiveX governor + intelliplug's eco-conservative profile + gpu freq max 320mhz with powersave governor + row i/o scheduler with 1024kb read ahead
so far this kernel is badass
pablo71 said:
loving this kernel to a high degree so far ...
Click to expand...
Click to collapse
I was wondering if all the Wear Shell and Tasker commands worked, sine I did not see that it was rooted. Thanks.
With the zram, should we see a reported higher amount of total ram available? What are others seeing?
Sent from my LG-D800 using Tapatalk
Sweet kernel need this for Android Wear 2.0 please dev
pmgnet said:
With the zram, should we see a reported higher amount of total ram available? What are others seeing?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Thanks for making me realize zram wasn't enabled, will be in the next release tonight
eduardozeassesme said:
Sweet kernel need this for Android Wear 2.0 please dev
Click to expand...
Click to collapse
Once wear 2.0 is released, I will move up
Sent from my SM-G935P using Tapatalk
pablo71 said:
loving this kernel to a high degree so far ... it was damn thoughtful of you to include kernel adiutor and make it flashable in recovery. the selection of governors, hotplug profiles and i/o schedulers is top notch (I'm no expert on these matters though I know just a small amount)
Early observations: on your stock settings both my watches don't like waking up on tilt to wake, they usually require a double-tilt to wake up and one watch even locked up and required a reboot BUT adjusting some settings fixed this instantly. I point out though that I did not do a factory reset or wipe any partitions or caches before installing this kernel. I just flashed and started having fun.
currently I'm getting VERY satisfactory performance with the cpu's frequency locked at 787mhz + interactiveX governor + intelliplug's eco-conservative profile + gpu freq max 320mhz with powersave governor + row i/o scheduler with 1024kb read ahead
so far this kernel is badass
Click to expand...
Click to collapse
How can you get your watch rooted? I tried flash some supersu for wear but I cannot start the kernel adiutor.