Develop Bugs

[Q] Cannot install Miui port.

http://forum.xda-developers.com/showthread.php?t=1719746
Original Thread.
For those that want information I've a GSM model and I flashed this upon
.58 Enhanced v2
-Firstly Flash DooMLoRDs ICS Beta Kernel via fastboot OK!
-Boot the phone into recovery OK!
-Perform a Factory Reset OK!
-Wipe cache and dalvik-cache OK!
-Flash the Zip from SD Card in recovery OK
-REBOOT and Enjoy! - Stuck On Kernel Screen / DoomLord Kernel ICS Beta
I'm unsure what to do, all the other roms seem to work well for me.
This rom is built based on KA14 Test Play which does not work for me either, and Cyanogen 9 RC2 is sluggish at games at least for me.
Cyanogen 7 is slow on the menu and all apps always stay in memory.
I just want to add this rom to my collection I.E I make a backup of each Rom and Kernel so I can switch without using a laptop.

sewer56lol said:
http://forum.xda-developers.com/showthread.php?t=1719746
Original Thread.
For those that want information I've a GSM model and I flashed this upon
.58 Enhanced v2
-Firstly Flash DooMLoRDs ICS Beta Kernel via fastboot OK!
-Boot the phone into recovery OK!
-Perform a Factory Reset OK!
-Wipe cache and dalvik-cache OK!
-Flash the Zip from SD Card in recovery OK
-REBOOT and Enjoy! - Stuck On Kernel Screen / DoomLord Kernel ICS Beta
I'm unsure what to do, all the other roms seem to work well for me.
This rom is built based on KA14 Test Play which does not work for me either, and Cyanogen 9 RC2 is sluggish at games at least for me.
Cyanogen 7 is slow on the menu and all apps always stay in memory.
I just want to add this rom to my collection I.E I make a backup of each Rom and Kernel so I can switch without using a laptop.
Click to expand...
Click to collapse
Hi , what was your rom before trying to install miui?

It seems so I had two recoveries at that point of which one being the leftover and which is terminated upon forst boot and one in the IcsBeta Kernel. What have I done is used the leftover CWM and that was the error. Anyway I found out this by accident when trying to enter flashmode and I didn't realise the kernel booted. I've flashed this rom using the kernel's touchscreen recovery and that worked for me. Anyway to answer your question it was 2.3.4 stock (.58) Enhanced version v2 anyway considering this is as an ICS ROM I should be able to get to it with any Gingerbread version.
Sent from my R800i using xda app-developers app and Miui v4 - Which IS installed.

[Q] lightening zap v1 help

Hello all, I have been arduously trying to install lightening Zap v1 to my LG Nitro HD (P930) with no success. I have tried several flashing software through links I have found on this site with no success.
1. I have tried LG Flash tool v1.3.77.21 "errors" LG/USB Parallel Lock Key is not detected clicked "OK" and prompted for "ID" and "PASSWORD" I cannot get past this step.
Lastly, specifically, how do I just flash the Lightening Zap to the phone? Do I just extract the zip files and place the files on my SD card and reboot or will I need flash the operating ROM at the same time. I appreciate any and all patience to assist.

You use CWM recovery to flash lightning zap. No need to flash a ROM with it unless you're wanting to. That's it.
Sent from my LG-P930 using xda premium

Thank you for the response. I am waiting on a new SIM to root this pig before I can follow your help.
Sent from my LG-P930 using xda app-developers app

I forgot to ask, will lightening zap work with i s 4.0.3?
Thanks again.
Sent from my LG-P930 using xda app-developers app

The LZ kernel is compatible w/ 4.1 JB ROMS (pA 2.55, CM10, AOKP/CM10). I haven't tested it w/ ICS. The worse to happen would be a soft brick but a flash of your backup will have you up and running.

LIghtening Zap flashed
X0dus said:
The LZ kernel is compatible w/ 4.1 JB ROMS (pA 2.55, CM10, AOKP/CM10). I haven't tested it w/ ICS. The worse to happen would be a soft brick but a flash of your backup will have you up and running.
Click to expand...
Click to collapse
So I "flashed" lightening zap to my LG Nitro HD p930 after backing up the ROM and the screen reads:
Secure booting Error!
Cause : boot certification verify
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
Enter the fastboot***
Enter the fastboot***
Long time no see!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I took the battery out since It wouldn't allow me to turn it off, and it re-boots the ROM with no indication of LZ being flashed via looking at "system information"
any ideas here?
Thanks.

that message on boot means you semi-bricked it, happened to me whan i tried to install recovery on rooted stock ICS 4.0.4 LG blocked bootloader with their ICS update, anyways seems like you semi-bricked it while trying to flash the kernel.

troystan said:
So I "flashed" lightening zap to my LG Nitro HD p930 after backing up the ROM and the screen reads:
Secure booting Error!
Cause : boot certification verify
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
Enter the fastboot***
Enter the fastboot***
Long time no see!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I took the battery out since It wouldn't allow me to turn it off, and it re-boots the ROM with no indication of LZ being flashed via looking at "system information"
any ideas here?
Thanks.
Click to expand...
Click to collapse
What ROM did you try flashing it on? If it's an ICS/CM9 rom, then that just means the kernel won't work. If it's CM10, well...that's a different story.

not sure what ur want BUT
If u want some speed on stock rooted with recovery on any stock ICS 4.0.4 ...kernel from thunder pretty amazing fast
Spec: GPU clocked from 266mhz to 301 CPU clocked from 1500mhz to 1944 (safe 1728-1890mhz)

Ok after doing a factory reset (wipe data) and flashing fresh ROM + flashing the LZ kernel, i cant honestly say it just doesnt work on the latest CM10 Nightlies, still showing cm10 kernel rom in about phone.

try this
just1nsama said:
Ok after doing a factory reset (wipe data) and flashing fresh ROM + flashing the LZ kernel, i cant honestly say it just doesnt work on the latest CM10 Nightlies, still showing cm10 kernel rom in about phone.
Click to expand...
Click to collapse
try flashing the ROM + Gapps, then booting the system. let it fully boot and settle out (10 minutes should suffice). After it has booted and settled, reboot into recovery and make a backup, then wipe cache and dalvik cache and try re-flashing the kernel.

[Q] CM 9.1 crashes continiously

Dear Community,
this is my first post on XDA-devloppers.
I ask you for help as y have a serious promlem with CM 9.1 on my xperia arc.
I flashed CM on my phone using the latest stable rom downloaded from the official cyanogenmod website (cm-9.1.0-anzu.zip)
Everything worked perfectly and i was delightet.
Unfortunately, after two days my phone crashed.
By crashed i mean that it first reacted very slow then froze. After this, the screen went black (backlight on) an then dark.
no button could get me back to lockscreen.
then suddenly the phone rebootet.
this happened every time about one minute after booting my phone.
As the problem didn't seem to get away i decided to reflash it:
wipe SD
delete davlik cache
reseting to factory
and then istalling the same rom and gapps from zip
everything worked fine again, but after one day i got the same problem again.
what can I do to fix this?
I would appreciate any kind of help
and excuse me if this isn't the right forum (search also, didn't help)
sincerly,
PraetorAce

You might want to try FXP's release:
http://forum.xda-developers.com/showthread.php?t=1356685
僕のLT18iから送られてきた

popthosegaskets said:
You might want to try FXP's release:
http://forum.xda-developers.com/showthread.php?t=1356685
僕のLT18iから送られてきた
Click to expand...
Click to collapse
thank you!
but which version should I take and how do I flash it? (just copy on SD and then install from zip?)

PraetorAce said:
thank you!
but which version should I take and how do I flash it? (just copy on SD and then install from zip?)
Click to expand...
Click to collapse
You can try the nightly versions if the stable doesn't work for you.
Take out the boot.img inside the ROM zip and flash with fastboot. Then put ROM zip onto SD card and flash with CWM.
僕のLT18iから送られてきた

I tried a few roms and it didn't work.
with the latest nightley version from cyanogenmod website gapps wans't installed properly and my home button didn't work.
and the roms I tried from the link you gave me abortet the installation.
i always flashed the kernel (boot.img) via flashtool and then used CWM to: 1 wipe davlic cache, 2 reset to factory and 3 install from zip
will it maybe work with odin (or is odin only for samsung devices?)
thnx

PraetorAce said:
I tried a few roms and it didn't work.
with the latest nightley version from cyanogenmod website gapps wans't installed properly and my home button didn't work.
and the roms I tried from the link you gave me abortet the installation.
i always flashed the kernel (boot.img) via flashtool and then used CWM to: 1 wipe davlic cache, 2 reset to factory and 3 install from zip
will it maybe work with odin (or is odin only for samsung devices?)
thnx
Click to expand...
Click to collapse
Odin is for Samsung devices only. If CM9.1 doesn't work for you then you might want to try CM10.
僕のLT18iから送られてきた

4.3 MI6 Roms not working on N7100

Hey guys=)
So yesterday i installed (after an EFS Backup) a 4.3 Custom Rom (JoelDroid) on my Galaxy NOte 2 N7100. It was on a rooted 4.1.2.
The rom booted everythign looked fine. I also wiped Data/factory resetted my device before i install the rom. But when i have to configure it the first time, it always crashed. So i made a full wipe and flashed the rom again (Philz touch btw the newst version). But the same thing again.
So i decided to flash a new ROM. Full reset, resetted caches and so on and the same problem again. My device boots up correctly but after 1minute or so it freezes completly. Cant press any buttons and so on.
The last try for me was to install a CM 10.2 (Asylum) version. This one is working properly. Had 1 or 2 crashes, but now its working fine.
But i dont want to lose the stock features.
Can anybody help me pls? What did i wrong? what do i have to do to get a proper functional MI6 4.3 rom on my N7100?
Thank you very much
Greets Marco

Have tried any other 4.3 rom? Steps u are following are absolutely correct btw..
If u using philz then u should choose the option "clean install befire a new rom" and manually format system,data,cahe and preload..this is a clean install.
Sent from my AweSoMe ?♥Note2♥?

Thanks for your reply!
Yes i used the option clean for New installation and i used 2 other 4.3 Roms too AS i mentioned. But at least i know now that my procedure was correct. Should i try another Rom? Or should i flash back to stock 4.2.2 (if its possible) via Odin?
Sent from my GT-N7100 using xda app-developers app

ok it looks like that the Asylum CM 10.2 is also not working. Crashes after some time too (every 1-2 hours) :/ really need help guys!
EDIT:
Ok i installed Stock 4.1.2 ROM via ODIN and now everything's working fine again. I think i will stick to this for some time now (have a prerooted version so root still there)

‎

[Q] [SGS2 T-989]Wierd !!! Help plzzzz..all custom roms crashes

Hello guys i'm very new to SGS2 T-989 ...and recently got this 2 year old t-mobile sgh t989 ...and it worked fine for few day..till i trid cm11 as first custom rom on it..it too worked well until i used camera...it rebooted itself ...i thought it was because cm11 is nightly ..so i tried carbon rom ...it worked quit fine for a while......for some reson it to started rebooting after a while ..lastly i tried cm10.2 stable ...it worked quite good i updated with cm updater then after it worked good and affter a while it too strted rebooting ...i thaught of power button failure and replaced it too....and finally flashed stock JB 4.1.2 rom ...it works quite well even till now..but the problem is that i cant install custom roms on it ...any help would be honey in my throught...does any one have the issue...???.....................finally got to tell i'm new to this mobile not for customization of roms ..i tried every thing wipe/data/F.Reset/Delvik/System...and even trie super/dark wipe script too.....hmm the matter is unable to install custom roms/////

What recovery are you using? (latest is 2.8.1.0) get it here! Flashable .zip HereWich Gapps? . . . Stock 4.1.2 have some firmware upgrades so maybe you're good to go now if not you might want to try installing stock via Odin (kill any Kies process before using Odin). Find stock rom Here! You will need to register to dwl. Ooh and dont use darkside wipes scripts as they are outdated, you can/will brick your phone. Just wipe system, data, cache, dalvik and .android_secure

I'm using cwm 6.0.4.3 ...and I flashed stock rom the latest ...I have root and cwm backup too...stock rom works completely perfect ....prblm is with custom roms..

Keep a copy of cmw and your backups just in case and try flashing using twrp. Also read this thread , "Have you ever used odin to flash the factory 4.1.2 UVMC6 rom? Some driver stuff was updated in that version and can only be installed with odin."

I've used odin 3.0.7 to falsh stock t989 latest jb 4.1 ...stock rom works 100%....problem is with 4.2+ roms

Ok was just to be sure its not that.. did you try flashing with twrp??
Also what scheduler/governor are you using? I use sio/samsung (personnal choice) (stable, decent battery life, good performance) found out that some combinaisons crash the phone (reboot)

Just now installed twrp that u mentioned and took a backup....now I will try the cus rom process and tell u the result ...hoping this eleminates my problem...and one more thing...im just using stock rooted rom..had not done any changes with cpu governence...and have a decent battery..

Only problem is with KK and 4.3 Roms
I've changed the rrecovery to twrp latest and tried installing from CM9 worked ,
CM 10.1 even worked [4.2.2] :good: [camera crashes while using flash]
Tried 10.2 had bootloops.....whats wrong with 4.3+...help :crying:

Glad to hear that
Camera is known to crash when using the flash and battery is low.
About 10.2 idk .. maybe it has to do with CM itself (search in CM threads). Try some other roms/kernels combinaison. as long as you have a backup of a working setup you should be good. Personnaly i really liked hellkat w/diablo kernel (4.4.2) and Beanstalk w/wildkernel (4.4.4) but as they say , your mileage may vary.

K that's very helpful and ..tnx for ur sugession