[Q] want official ics, currently on the leak.. - Acer Iconia Tab A100

Is there any difference?
I've been running the leak since it was released and now see that the official update is out.
How do I go about upgrading?
I've seen no bugs with the leak.
Sent from my PG86100 using Tapatalk 2

intheb0x said:
Is there any difference?
I've been running the leak since it was released and now see that the official update is out.
How do I go about upgrading?
I've seen no bugs with the leak.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
014 in the development section is the official stock rom...not sure if you tried any games on the leak but the touch screen issues is one of the biggest flaws. Some apps that didn't function well on the leak seem to work now as well. Upgrading would be the same as how you did with the leak...place the update.zip on the root of the sdcard and hold up volume button + power upon starting up the tablet and you should be good...if you already have the bootloader unlocked and already installed a new recovery (cwm or teamwin) then just put the zip on your sdcard...load up recovery and install (wipe everything as usual of course)

cheeb said:
014 in the development section is the official stock rom...not sure if you tried any games on the leak but the touch screen issues is one of the biggest flaws. Some apps that didn't function well on the leak seem to work now as well. Upgrading would be the same as how you did with the leak...place the update.zip on the root of the sdcard and hold up volume button + power upon starting up the tablet and you should be good...if you already have the bootloader unlocked and already installed a new recovery (cwm or teamwin) then just put the zip on your sdcard...load up recovery and install (wipe everything as usual of course)
Click to expand...
Click to collapse
Thanks,I do not use it for games,
I thought it functioned pretty well.
Thanks for the help.
Sent from my PG86100 using Tapatalk 2

+1 for the .014 in the dev section.
It is one of the official ICS updates. I have personally seen one tab get updated to the same build OTA.

intheb0x said:
Thanks,I do not use it for games,
I thought it functioned pretty well.
Thanks for the help.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
BTW...if you have unlocked your bootloader and install the stock ics (014) then it will relock your bootloader....the process to get back to being unlocked will be the same as before which is good..

Downloaded from two different sources and tried to flash with the official recovery.
It starts but then goes to the android with the red exclamation point..
I'm on gen 1 device.
Why does this keep happening?
Sent from my PG86100 using Tapatalk 2

intheb0x said:
Downloaded from two different sources and tried to flash with the official recovery.
It starts but then goes to the android with the red exclamation point..
I'm on gen 1 device.
Why does this keep happening?
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
What steps are you doing? Make sure the update.zip is in fact named just that: update.zip, and make sure it is on the external_sd. A nice cleanly formatted microSD card is a good idea.

The normal steps. Rename the file to update.zip and boot into stock recovery.
Sent from my PG86100 using Tapatalk 2

I had a similar issue. Turned out my tablet wasn't charged up enough. Gave it a full charge and it updated fine.
Sent from my A100 using Tapatalk

BigGunn said:
I had a similar issue. Turned out my tablet wasn't charged up enough. Gave it a full charge and it updated fine.
Sent from my A100 using Tapatalk
Click to expand...
Click to collapse
My battery was pretty low, I'll try tonight, thanks for the heads up!
Sent from my PG86100 using Tapatalk 2

Got it to update.
Figured out I wasn't putting it on mnt/external sd or whatever.
Who would of known there were so many different little levels on tablet with its own set of folders.
If it wasn't for es file explorer or whatever it's called and it's favorite button I would of never seen it and known what I was doing wrong.
So I am now up to date and the touch screen is amazing, and spot on.
I was wondering why I would try to copy text and it would never select or if it did select it would select text on a entire different area of the screen.
My gf manages her Vista print website front the tablet and always complained of never being able to hit the right buttons or it would select a entire different area of the Web Page editor.
We never put 2 and 2 together that it was a touch screen issue.
Because I never seen another bug and thought the release was pretty stable and efficient.
Sent from my PG86100 using Tapatalk 2

Went back to go fwd and got nothing
ok so i have figured out how to go back and re-install HC 3.2. i took a pic of that version. then i got the update. another pic of version .then i ended up at 3.2.1 and then nothing. system update always says your system is up to date. i tried registering because the tablet asked for it. i did it. (it told me i was previously registered.) anyways, my girlfriends daughter has an a100 and it updated naturally and here is a pic of her version on her tablet. no one has mentioned this version anywhere that i have found. anyone heard or seen this version? is there something i need to do to get the update juices flowing? i been checking every 5 or 10 minutes with no luck....

bluevmax92 said:
ok so i have figured out how to go back and re-install HC 3.2. i took a pic of that version. then i got the update. another pic of version .then i ended up at 3.2.1 and then nothing. system update always says your system is up to date. i tried registering because the tablet asked for it. i did it. (it told me i was previously registered.) anyways, my girlfriends daughter has an a100 and it updated naturally and here is a pic of her version on her tablet. no one has mentioned this version anywhere that i have found. anyone heard or seen this version? is there something i need to do to get the update juices flowing? i been checking every 5 or 10 minutes with no luck....
Click to expand...
Click to collapse
Hmm seems there is a more up to date
. 15 ics.
Wondering what the difference is between that and the
. 14 I just loaded.
Sent from my PG86100 using Tapatalk 2

There is a third version .017. Seen here: http://forum.xda-developers.com/showthread.php?t=1635420
I don't think there is much (or anything) different between the three. But I'm not an expert.
http://forum.xda-developers.com/showthread.php?t=1641746

Just got this
Sent from my PG86100 using Tapatalk 2

Related

[Q] Sprint Galaxy S III Rooted/Installed ROM... Now won't power on. Help!

Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.
alexanderd said:
Hi everyone. I'm new to the forum and I'm looking for a little help today.
I rooted my new Sprint Galaxy S III using Odin3-v3.04, and CWM_SuperUser_v3.0.7. Afterwards I rebooted and all was good.
I then downloaded I9300_Omega_v6.0_XXALF6 ROM and loaded on my phone and rebooted into recovery to install the ROM. I went through the install process, selected remove bloatware and installed. When finished I checked the reboot phone and clicked finish. The phone turned off and didn't ever turn back on.
I have pulled the battery and tried to power on using recovery, download mode and just power but nothing works.
Anyone have any idea what I can do?
Thank you for your time and help.
Click to expand...
Click to collapse
development area has a thread for that:
http://forum.xda-developers.com/showthread.php?t=1727171
ONLY use ROMs that you'll find here in these threads not the I9300; that s a different phone from ours.
Thanks I'll check there.
Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA
But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2
Epix4G said:
But seriously I hope you learned your lesson and will read and hope you get your phone fixed or replaced
Sent from my Sprint Galaxy Nexus CDMA using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
Hopefully this fail helps us all back from a potential brick. We live, flash and learn.
Sent from my SPH-D700 using xda premium
New phone on the way!
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.
alexanderd said:
I was able to get a replacement sent from Sprint. Had to go to a corporate store and have a tech look at the phone and they agreed it was toast...
Luckily they didn't know it was due to my failed attempt to load an unsupported ROM.
Lesson learned... new phone should be in by the end of the week.
I'll be waiting for a supported ROM this time.
Click to expand...
Click to collapse
No wonder our insurance deductibles keep going up...
bizdady said:
No wonder our insurance deductibles keep going up...
Click to expand...
Click to collapse
+1
Still sucks for op
Sent from my SPH-L710 using Tapatalk 2
matrixzone5 said:
Honestly I was waiting for this to happen gid luck restoring it phone
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
Oh man tell me about it, I almost stupidly went on to the CM9 nightlies and downloaded the I9300 version before I thought to myself, "well wait a minute, that's not my model number!"
Duh, shoulda had a V8.
I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks
pizzlewizzle said:
I didnt install a GSM rom but still managed to brick somehow. Didnt touch any system files or do anything to where i should be bricked either. Any idea when a full stock Odin package will be made? My phone has been bricked for almost 2 days now
Edit: i started a tread here a few days ago -> http://forum.xda-developers.com/showthread.php?t=1731416 if anyone cares to look or has any advice for me
Thanks
Click to expand...
Click to collapse
What have you tried so far? Have you tried reflashing cwm recovery in Odin?
I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method
taygutta said:
I did the same thing that the OP said, flashed that omega rom and now my phone wont turn on either.
I was going to try the jig method
Click to expand...
Click to collapse
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171
bizdady said:
Have you tried mskip's fix??
http://forum.xda-developers.com/showthread.php?t=1727171
Click to expand...
Click to collapse
I want to do this but I somehow need to get the phone on. The buttons dont work.
Any luck?
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?
brickeds3 said:
My phone got stuck booting, so I tried to install the omega rom. The install worked well, and I clicked "reboot." Now the phone won't turn on. I can't get to ODIN or recovery anymore.
Did you guys find any fixes?
Click to expand...
Click to collapse
What happened is that you flashed a rom that was meant for the international version of the S3 and your on the US version. The only fix I have found is to send it to mobiletechvideos.com. I did and they say they can fix it and maybe save my data I have on it ( I just sent it in)
My fingers are crossed for the data recovery but as far as the phone I am going to send it for a exchange anyway.
Welp, I'm sad to say I just did the same thing too. Should have read. I'm a stinkin noob at this. I installed the I9300 version on a US version phone. Has there been any more development on this? Is the hardware fried, or is there a fix through that mobiletechvideos.com that was mentioned? What was the outcome of that, Taygutta, if you don't mind me re-bringing back up a potentially painful topic?? This thread made me a little sick, since it's my brother's new phone (someone else that knew what they were doing rooted it for him but he didn't like the rom, so I thought I would help him find a few other options to try flashing.)
Anyway, any confirmation that I'm buying my brother a new phone (so I can emotionally prepare for the purchase) or are there some other options?
There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.
6uPMAH said:
There's one more thing you can try. There's a little device called a USB Jig. It was made for SGS-2 to clear the yellow triangle and reset flash counts in ODIN mode. It also puts your phone in ODIN mode by simply plugging it into the USB port of a powered down phone. Once in ODIN mode, you can reflash a stock ROM, recovery, etc. You can buy these for around $20 or less on the web.
If this does not work, I'm afraid nothing will.
Good luck.
Click to expand...
Click to collapse
Somewhere in the thread an answer exists. You are not the first to do this.
I think the jig is the best way.
Sent from my SPH-L710 using Tapatalk 2

[Q] A100, cannot update to 3.2.1 tearing my hair out

Hello one and all. First time poster, long time lurker
ATM i have a A100 thats a GEN1, im trying my hardest to flash to 3.2.1 and even ICS but at every step im geting nowhere fast.
OTA just says update is invalid and will be cancelled and trying 4 different SD cards with the official ICS ROM just gives me the gears and art 25% every single time it reverts to an Droid with an Exclamation point.
Ive factory reset over a dozen times and i am at a loss how to update this stupid tablet before i throw it at the wall
Is there any way i can unlock the bootloader or so any kind of custom restore on it fr HC 3.2 as all of the guides ive seen on here are for ICS which isnt helping me due to the above.
Any and all help/advice graciously received.
lightningslow said:
Hello one and all. First time poster, long time lurker
ATM i have a A100 thats a GEN1, im trying my hardest to flash to 3.2.1 and even ICS but at every step im geting nowhere fast.
OTA just says update is invalid and will be cancelled and trying 4 different SD cards with the official ICS ROM just gives me the gears and art 25% every single time it reverts to an Droid with an Exclamation point.
Ive factory reset over a dozen times and i am at a loss how to update this stupid tablet before i throw it at the wall
Is there any way i can unlock the bootloader or so any kind of custom restore on it fr HC 3.2 as all of the guides ive seen on here are for ICS which isnt helping me due to the above.
Any and all help/advice graciously received.
Click to expand...
Click to collapse
Don't unlock the bootloader with 3.2.
What procedure are you using exactly. I just want to see if any of the steps is wrong.
Romman0 said:
Don't unlock the bootloader with 3.2.
What procedure are you using exactly. I just want to see if any of the steps is wrong.
Click to expand...
Click to collapse
Using OTA update, it goes to install and then says update invalid. Tried resetting the screen to never turn off factory restores, the lot.
tried installing it from an external SD card and even though i tried 4 individual cards which are genuins sandisk, they all fail to install.
lightningslow said:
Using OTA update, it goes to install and then says update invalid. Tried resetting the screen to never turn off factory restores, the lot.
tried installing it from an external SD card and even though i tried 4 individual cards which are genuins sandisk, they all fail to install.
Click to expand...
Click to collapse
Where are you getting the update from?
Sent from my Galaxy Nexus using Tapatalk 2
And is it named properly.
pio_masaki said:
Where are you getting the update from?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
From within the tablet itself and on the board here.
Romman0 said:
And is it named properly.
Click to expand...
Click to collapse
Yes, I've flashed quite a few tablets before and never had this trouble.
lightningslow said:
From within the tablet itself and on the board here.
Yes, I've flashed quite a few tablets before and never had this trouble.
Click to expand...
Click to collapse
Then the update is bad somehow. If its even off by a bit the signature check will fail. All I can really suggest is keep downloading and trying, assuming its for the proper device anyways (meaning not an a101 or something).
Sent from my Galaxy Nexus using Tapatalk 2

Flashed rooted ATT jellybean

This is my first post, so it would not let me reply to the thread here
http://forum.xda-developers.com/showthread.php?t=1739426
i wanted to give thanks as i really appreciate the rooted stock ATT 4.1.1 ...... your super quick! I am up and running jelly bean now, and i still have my root... i had a minor issue of odin saying "pass" after flashing but my phone was stuck in boot loop untill i went into recovery mode and did a factory reset. Im not sure if that is normal or not but whatev it works great now
doing the same thing right now. i'm in germany so i'm not sure if that's what's causing the slow download speed 500Mbps link @ a convention center, but i'm at 416MB out of 617MB and very very very patiently waiting.
it's good to hear that you only ran into that small issue. i'll keep an eye out for it. Thanks!
ak907 said:
This is my first post, so it would not let me reply to the thread here
http://forum.xda-developers.com/showthread.php?t=1739426
i wanted to give thanks as i really appreciate the rooted stock ATT 4.1.1 ...... your super quick! I am up and running jelly bean now, and i still have my root... i had a minor issue of odin saying "pass" after flashing but my phone was stuck in boot loop untill i went into recovery mode and did a factory reset. Im not sure if that is normal or not but whatev it works great now
Click to expand...
Click to collapse
Welcome to XDA!
I'm downloading it on my computer at home right now but I was in a rush to get to work. Looks like I'll have to wait until my lunch break to flash this, haha.
Also I see you're from Wasilla! Enjoying the weather? (I'm originally from Fairbanks)
Maroon Mushroom said:
Welcome to XDA!
I'm downloading it on my computer at home right now but I was in a rush to get to work. Looks like I'll have to wait until my lunch break to flash this, haha.
Also I see you're from Wasilla! Enjoying the weather? (I'm originally from Fairbanks)
Click to expand...
Click to collapse
First post here as well. I was rooted on stock, and this flashed flawlessly. Not 1 problem. Thanks!
ran the update, installed cwm and the phone works flawlessly minus one issue. gaming has become laggy. anyone else with studder or lag issues?
Aww man. It figures, I just finished flashing another rom like, about 18 hours ago. Now with finals coming up, I don't have time to do this one! Oh well, I guess I have something to do AFTER finals then, hahaha.
bluemax189 said:
ran the update, installed cwm and the phone works flawlessly minus one issue. gaming has become laggy. anyone else with studder or lag issues?
Click to expand...
Click to collapse
Is your power saving mode on? I've always found it makes so many things laggy, unfortunately. Might be enabled by default on the rom. Worth a look.
Great community here. Yesterday I was non-rooted ICS. Today I'm rooted JB with Wallet.
My phone just got 1000% better.
First of all, I appreciate all the Devs hard work bringing these Roms to us! :good:
I was running rooted UCALH9. Updated to this JB via Odin and all SEEMED good. Problems I had:
1) Play Store FC's - FIX - I went into Application Manager and removed updates for the Play Store app, which reverted it back to the default Play Store app. This fixed my problem. MAKE SURE YOU DO NOT UNINSTALL!
2) Rom Manager - I would get root user authentication error when trying to Fix Permissions. Everything else in Rom Manager worked. No fix at this time.
3) Gallery - None of my pictures were showing up. This is even after clearing caches. I am convinced it's because I can't Fix Permissions, but what do I know... No fix at this time.
Any help would be appreciated!
Damn I had that same Play Store FC problem yesterday -- I wish I'd have figured that out. I ended up doing factory reset lol.
I receive same fix permission error as you, but I rebooted into recovery to do it.
egyan said:
Damn I had that same Play Store FC problem yesterday -- I wish I'd have figured that out. I ended up doing factory reset lol.
I receive same fix permission error as you, but I rebooted into recovery to do it.
Click to expand...
Click to collapse
You didn't happen to play with the camera at all, did you?
I can live with the Fix Permissions via CMW, so that would clear up 2 out of 3 of my problems. All I need is a fix for the Gallery problem, and I can go back to Official JB.
Thanks!
Howl long was the flash?
I'm inside Odin on flashing system.img.ext4 right now and it stays there which looks like about 20% for last 10 minutes with no forward movement.
How long do I need to wait before I consider something is wrong with flash process?
Changing cable to Samsung one did the trick if you are in the same situation.
Can you do this AFTER upgrading to Jellybean?
questionmillennium said:
Can you do this AFTER upgrading to Jellybean?
Click to expand...
Click to collapse
Wondering the same thing. I already installed the official JB and set all my stuff up. Will this wipe all of those settings or just simply inject the root files?
questionmillennium said:
Can you do this AFTER upgrading to Jellybean?
Click to expand...
Click to collapse
greystealth said:
Wondering the same thing. I already installed the official JB and set all my stuff up. Will this wipe all of those settings or just simply inject the root files?
Click to expand...
Click to collapse
If you are talking about flashing the root injected JB i post, yes you can flash it after upgrading and no it won't wipe anything in data, everything should be preserved for you.
Weather here sux.... Hovering slightly above 0 degrees with 80 mph winds for the last week so add on the wind chill factor and u can only imagine... And no snow yet.
So far no other issues with this rom. Seems to run perfectly. Now just waiting for someone to write a power menu options and enable stock tethering script =P
Sent from my SAMSUNG-SGH-I747 using xda premium
You might try wiping data for gallery app and I think it's media storage app...see if that helps with gallery.
Toested said:
You didn't happen to play with the camera at all, did you?
I can live with the Fix Permissions via CMW, so that would clear up 2 out of 3 of my problems. All I need is a fix for the Gallery problem, and I can go back to Official JB.
Thanks!
Click to expand...
Click to collapse
Flashed this over stock and works flawless no lag no stutter. Thx
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ak907 said:
This is my first post, so it would not let me reply to the thread here
http://forum.xda-developers.com/showthread.php?t=1739426
i wanted to give thanks as i really appreciate the rooted stock ATT 4.1.1 ...... your super quick! I am up and running jelly bean now, and i still have my root... i had a minor issue of odin saying "pass" after flashing but my phone was stuck in boot loop untill i went into recovery mode and did a factory reset. Im not sure if that is normal or not but whatev it works great now
Click to expand...
Click to collapse
Wanted to say the same thing. ..thanks all came from black jelly to rooted jb with mobile Odin with no problems !
Sent from my SAMSUNG-SGH-I747 using xda premium
Anyone figure out how to enable stock jellybean lock screen?
Sent from my SAMSUNG-SGH-I747 using xda premium
Neflhiem said:
Wanted to say the same thing. ..thanks all came from black jelly to rooted jb with mobile Odin with no problems !
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I kinda miss the added features from the rom I was on frosty jb but I'm adding things here and there, wish we had multiview seems cool but I'm just waiting for the 4.2 roms to start coming out but so far not too bad, except the flash counter thing, but I'm happy with it so far just need someone to put out a hd theme like the one I had on my phone before but that to will come, also glad that the 4.2 camera with photosphere still works that feature is cool
Sent from my SAMSUNG-SGH-I747 using xda premium

[Q] Tried to install ROM, Galaxy Nexus won't boot at all

I tried to install a ROM that must have not downloaded properly now my Nexus does not boot at all. It doesn't even go to the Google screen, it's just plainly black. The worst part is that it happened last week and I thought the phone had just broken so I got a hardware swap at Best Buy but now I realize it must have been the ROM. I don't want to go back to Best Buy this quickly (not even 24 hours later...) Does anyone know how I might fix it?
hulslanderam said:
I tried to install a ROM that must have not downloaded properly now my Nexus does not boot at all. It doesn't even go to the Google screen, it's just plainly black. The worst part is that it happened last week and I thought the phone had just broken so I got a hardware swap at Best Buy but now I realize it must have been the ROM. I don't want to go back to Best Buy this quickly (not even 24 hours later...) Does anyone know how I might fix it?
Click to expand...
Click to collapse
If it was a faulty download the rom wouldn't have installed properly, what steps did you take in installing the from. Are you able to boot into recovery?
Sent from my Galaxy Nexus using xda app-developers app
FIXED
sensation lover said:
If it was a faulty download the rom wouldn't have installed properly, what steps did you take in installing the from. Are you able to boot into recovery?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I installed a kernel too, both from CWM. Maybe it was the kernel. and no, I couldn't get to recovery but I managed to fix it. I can't post links because I'm a new user but it involved installing omap drivers and running a batch file of some sort that made it bootable. Even though the screen was totally black I guess the computer could still detect it with some work.
Awesome!
hulslanderam said:
I installed a kernel too, both from CWM. Maybe it was the kernel. and no, I couldn't get to recovery but I managed to fix it. I can't post links because I'm a new user but it involved installing omap drivers and running a batch file of some sort that made it bootable. Even though the screen was totally black I guess the computer could still detect it with some work.
Click to expand...
Click to collapse
Congrats! That's gotta feel good to resurrect a "dead" phone!
I've tried to use the OMAP flash to fix mine, but I still can't get into Odin mode (even tho the drivers and bat file seem to install successfully). If you have any tips, then please let me know.

[Stock Odin Rom]{How To Use ODIN} attached. N900TMI7& NB4 (4.4.2) (How to use ODIN)

[Stock Odin Rom]{How To Use ODIN} attached. N900TMI7& NB4 (4.4.2) (How to use ODIN)
*****regarding the 4.4 update if u flash in Odin your boot loader will be updated .... Meaning no going back to 4.3***
Here's the stock odin tar downloaded from samfirmware. Mediafire dl link much faster than hotfile http://bit.ly/18Ll149. 4.4 nb4 link
http://www.mediafire.com/download/esadia6synn8s6j/TMB-N900TUVUCNB4-20140305155920.zip
Fyi.. Odin will not factory reset. If you want to start fresh factory reset in recovery before the Odin flash.
1.. Download .tar and Odin to pc (move to desktop)
2.. Extract .zip N900TUVUBMI7_N900TTMBBMI7_TMB-1.zip
3..Run odin as administrator (left click on odin.exe)
4. Put phone into download mode..With phone off press Volume down + home and power (press power button last) ..now press..volume up to enter dl mode..
5.. Connect phone to pc... Wait till drivers install. when completed youll see a yellow ID:COM box light up...
6.. Click on pda and open N900TUVUBMI7_N900TTMBBMI7_N900TUVUBMI7_HOME.tar.md5. ( If you did like i said it will be on you desktop. )
7 Patience.........
When finished it will reboot. on odin a green box should come up saying "passed"
People that havent used Odin before i would suggest using the odin i linked here. Its kinda dumbed down. .. No re-partition options .. If not ***** MAKE SURE TO NOT CHECK ANYTHING ELSE EXCEPT AUTO REBOOT*****....
Link to odin 1.85 https://www.dropbox.com/s/s7t92nmy95kh3d9/Odin3-v1.85-1.zip
***I will keep this post updated with stock firmware's as they become available***
Sent from my SGH-T889 using Tapatalk 4
I need to know how can I just remove /system/csc/languages.xml and repack and flash.
does this change your warranty from 0x0 to 0x1 ?
any brave souls ?
This is the exact rom that you get on your phone. No need to flash unless you need to fix it or go back to stock
Sent from my SGH-T889 using Tapatalk 4
Fyi I talked to. Mr Robinson. Hes going to look into making a root injected stock rom
Sent from my SGH-T889 using Tapatalk 4
deeznutz1977 said:
Fyi I talked to. Mr Robinson. Hes going to look into making a root injected stock rom
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
If he does not do it I will look into it. Here is a ROM I made for the Sprint Note II http://forum.xda-developers.com/showthread.php?t=1990681. I stopped updating it because my wife was always on me about spending all my time on the computer but since my divorce was final on Monday I have a little more free time.
bp328i said:
If he does not do it I will look into it. Here is a ROM I made for the Sprint Note II http://forum.xda-developers.com/showthread.php?t=1990681. I stopped updating it because my wife was always on me about spending all my time on the computer but since my divorce was final on Monday I have a little more free time.
Click to expand...
Click to collapse
Cool... You don't have to tell me about your wife. I look at my phone or computer and she turns into the devil?. Horns and all . :sly:
Sent from my SGH-T889 using Tapatalk 4
deeznutz1977 said:
Cool... You don't have to tell me about your wife. I look at my phone or computer and she turns into the devil. Horns and all . :sly:
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
My wife says I touch my phone more than I touch her - but when I explained that most of the time I was touching my girl friend and that she shouldn't worry about my phone, things got really ugly.
mocsab said:
My wife says I touch my phone more than I touch her - but when I explained that most of the time I was touching my girl friend and that she shouldn't worry about my phone, things got really ugly.
Click to expand...
Click to collapse
Lolz... I think you wife and my wife might be sisters
Sent from my SGH-T889 using Tapatalk 4
deeznutz1977 said:
Lolz... I think you wife and my wife might be sisters
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
LOL
thanks for this, im getting RPC:S-5:AEC-0 errors. Hopefully this will revert everything back to normal.
transitoyspace said:
thanks for this, im getting RPC:S-5:AEC-0 errors. Hopefully this will revert everything back to normal.
Click to expand...
Click to collapse
So am i i asked deez troy about it
deeznutz1977 said:
So am i i asked deez troy about it
Click to expand...
Click to collapse
I just flashed this, Didnt help.....ugh...i knew i should have just waited on the root.
transitoyspace said:
thanks for this, im getting RPC:S-5:AEC-0 errors. Hopefully this will revert everything back to normal.
Click to expand...
Click to collapse
Ditto, also having the same issue. One of the solution was to install the latest Play Store apk, but obviously we have the latest. Then I found another thread here on xda where it apparently went away the following morning.
Seems like it ain't working on my S4 either even though I was able to install an app couple hours ago.
DKYang said:
Ditto, also having the same issue. One of the solution was to install the latest Play Store apk, but obviously we have the latest. Then I found another thread here on xda where it apparently went away the following morning.
Click to expand...
Click to collapse
I Just pmd chainfire ill let youi guys know
deeznutz1977 said:
I Just pmd chainfire ill let youi guys know
Click to expand...
Click to collapse
Seems like you quoted me before my edit. lol. It's also not working on my S4, so it might be on Google's side from what I'm experiencing, but I'll wait and see the response you get from him.
DKYang said:
Seems like you quoted me before my edit. lol. It's also not working on my S4, so it might be on Google's side from what I'm experiencing, but I'll wait and see the response you get from him.
Click to expand...
Click to collapse
Well i have my SG3 on Sprint, works fine there (older version of playstore) and root wasnt by Chainfire(dont think at least)
So I dont think its googles side....hopefully this gets resolved quick.
transitoyspace said:
Well i have my SG3 on Sprint, works fine there (older version of playstore) and root wasnt by Chainfire(dont think at least)
So I dont think its googles side....hopefully this gets resolved quick.
Click to expand...
Click to collapse
Seems like a reboot fixed it on my S4. I'm able to update apps on that one now.
Also just tested with the Note 3, I rebooted and was able to download an app. I still think it was on Google's side, but that's only an assumption or it could be because these two devices are using my primary gmail account.
DKYang said:
Seems like a reboot fixed it on my S4. I'm able to update apps on that one now.
Also just tested with the Note 3, I rebooted and was able to download an app. I still think it was on Google's side, but that's only an assumption or it could be because these two devices are using my primary gmail account.
Click to expand...
Click to collapse
I didnt reboot, it just started auto updating stock apps. Looks like it might have been Google.
Either way this Odin works. thanks OP for hosting it on mediafire, hotfile always takes forever for me. :good:
As this is the first Odin firmware tar I will move this to development
Future releases would need to go in General.

Categories

Resources