Develop Bugs

[Q] (Help) Accidently flashed cwm.img to boot

Hello,
I have got a bit tired of waiting for the OTA volume fix and decided to tr and apply it manually.
I made a mistake and used the following command fastboot flash boot cwm.img.
now my nexus just boots into cwm is there any way I can fix this?
Now when I try to use fastboot it just keep saying (waiting for device), and the phone sits in CWM
any help would be appreciated.
Thanks
Cthuluh

You can try these. Factory images. Someone posted about them and I bookmarket them, and downloaded a copy just incase.
http://code.google.com/android/nexus/images.html

Hi,
Awesome I just finished getting them and and all is well
Phew!!!
thanks

Luxferro said:
You can try these. Factory images. Someone posted about them and I bookmarket them, and downloaded a copy just incase.
http://code.google.com/android/nexus/images.html
Click to expand...
Click to collapse
Excellent we have someone to test the script
You could just try flash the boot.img to the boot partition
Code:
fastboot boot boot.img
And if that works
Code:
fastboot flash boot.img

Hi,
I took the battery out for a few minutes and when I put it back in I booted it into fastboot, which it wouldnt do earlier (kept booting cwm).
I then used the instructions supplied in the google factory image download mentioned above.
fastboot flash bootloader bootloader-maguro-primekj10.img
fastboot reboot-bootloader
fastboot flash radio radio-maguro-i9250xxkk1.img
fastboot reboot-bootloader
fastboot -w update image-yakju-itl41d.zip
And all is now well.
lesson learned dont flash while drinking red wine.
Thanks again
Cthuluh

Anything special needed for flashing the Google factory restore images?

After initially trying the Android Revolution HD rom after rooting few days ago, I realized I wanted to go back to stock. I downloaded "https://dl.google.com/dl/android/aosp/mysid-icl53f-factory-65895fa8.tgz" off of http://groups.google.com/group/android-building/msg/2cd2b16ed56a7e84 for my Verizon LTE GN variant...
I extracted "image-mysid-icl53f.zip" and flashed it the usually way with CWM, ended up going into a boot loop. Luckily I had a Nandroid backup of my phone just after rooting so I was able to use that to restore back to stock...
Was there any reason that "image-mysid-icl53f.zip" didn't work? I read another unrelated (if I remember correctly) post on here about flashing the image with a modified script from Google, do I need to use the flash-all.sh or something when flashing this zip? Do I need the other files (bootloader-toro..., radio-cdma..., and radio-toro...)? Or did I just get unlucky and a reflash probably would have fixed it?
Thanks

You don't flash the zip with cwm. You need to do fastboot -w update blah.,ip command with it.
Search for the "convert yawuwhatever to yawublah" thread for the directions
Sent from my Galaxy Nexus

s1977 said:
Resetting the phone by taking out the battery shouldn't be a problem if you havent started flashing the new rom. I would try again after confirming that the fastboot and usb drivers can see the device before proceeding any further.
You can use fastboot devices to list attached devices. Only progress further once you can see your phone using the above command.
I did the same today a few hours ago and in my case, I started the phone in bootloader mode via Volume up + down + power button or via adb reboot bootloader. Then with fastboot, issue the fastboot oem unlock command to unlock the bootloader first. Once done, then you can flash the stock image (bootloader, radio and rom) with the following commands.
fastboot flash bootloader <bootloader image>
fastboot reboot-bootloader
fastboot flash radio <radio image>
fastboot reboot-bootloader
fastboot -w update <rom image>
Don't forget to lock the bootloader once done using fastboot oem lock
Just to clarify, depending on the version of the OS on your client PC/Mac/Linux, there are variants of fastboot. I use fastboot-mac from my mac.
Click to expand...
Click to collapse
Also try checking out this thread: How to? Change from yakjuxw to yakju

[Q] Is my phone brick? stuck on google boot image

I am not a noob when it comes to android dev, but this has stomped me and I am asking for expert's help. I have a GSM version SGN that I flashed the official yakju ICL53F on it via fastboot. It has been working great for a month now. Suddenly today I felt it was vibrating in my pocket, took it out and discover it was stuck in boot loop--the google sign with the unlocked icon. I waited til I get home to put clockworkmod on it, but when I try to nandroid it first it gave me an error. Then I figure I would just fastboot the stock rom on it again, using fastboot mode like I did before. I even flashed the bootloader, radio, and system image. Still stuck on google icon with screen went blank, vibrate and repeat. Is there anything else I should try? odin mode is also available, but I am not seeing any instructions on it at the developer section so I am reluctuant to try it. I can still adb and fastboot to access my phone...help please?

well I am no noob but I am no expert either. Apparently you cannot
fastboot flash system XXXXstock_image.img, you have to use
fastboot update -w XXXstock_image.img instead.
still I am baffled by why this happened in the first place. I was ready to lock the bootloader back up and send it in for warranty...glad I didn't have to resort to that.

lettcco said:
well I am no noob but I am no expert either. Apparently you cannot
fastboot flash system XXXXstock_image.img, you have to use
fastboot update -w XXXstock_image.img instead.
still I am baffled by why this happened in the first place. I was ready to lock the bootloader back up and send it in for warranty...glad I didn't have to resort to that.
Click to expand...
Click to collapse
I think you are mixing some things up.
The "update" parameter of fastboot is used to flash a group of images inside a zip file to you device.
The "flash" parameter is used to flash a single image to your device.
The following two groups of commands do the same thing:
fastboot update -w image-yakju-icl513f.zip
or
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot erase cache

[Q] How to restore back to factory settings after using towel root

I have rooted my device using towel root which doesn't unlock the boot loader. I then used the twrp manager to install custom recovery. I am wondering how to restore everything back to factory as all the tutorials I have seen so far require an unlocked boot loader. Any help will be appreciated, thank you.

Flash a stock r for your phone
swagg blasted from TMO LG G3

jailbreakkid23 said:
Flash a stock r for your phone
swagg blasted from TMO LG G3
Click to expand...
Click to collapse
If I download a stock image from google and flash it from my nexus 7 using twrp will everything be restored to factory settings?

If the boot loader is locked does that mean I can just do a normal factory reset on the device and it will remove the recovery and root?

fastboot
Jordydaman said:
If the boot loader is locked does that mean I can just do a normal factory reset on the device and it will remove the recovery and root?
Click to expand...
Click to collapse
you have to install stock ROM by adb mode using fastboot command
you can't flash stock ROM via custom recovery.

@SidDev said:
you have to install stock ROM by adb mode using fastboot command
you can't flash stock ROM via custom recovery.
Click to expand...
Click to collapse
Would you mind finding a link for me ? I have never encountered this before as I have always unlocked the bootloader to root but this time I used towel root which was different as explained above.

Doesn't the boot loader have to be unlocked to flash a ROM via adb?

try this and press thanks
Jordydaman said:
Doesn't the boot loader have to be unlocked to flash a ROM via adb?
Click to expand...
Click to collapse
nope,
Step 1: Download the ADB/Fastboot files and the
USB drivers for Windows based PC first. The the
latest factory image for your Nexus device can be
downloaded directly from Google’s website .
ADB/Fastboot – Mac , Windows
USB drivers for Windows
Extract the contents of the ADB/Fastboot ZIP file
inside a new folder called ‘google’ on your desktop.
Extract and transfer the contents of the factory
image inside this folder as well. The list of files will
include a ZIP file containing the codename of your
Android device, two files with “flash-all” names, and
a bootloader image file. All the extracted contents of
the factory image should be inside the same folder
as the ADB and Fastboot file, otherwise you will get
a file not found error.
Make sure to install the ADB drivers as well if you
are running a Windows based PC.
Step 2: Now, reboot your Nexus device in bootloader
mode. This is usually done by switching off the
device, and pressing the Volume down + Volume Up
+ Power button simultaneously. If that does not
work, try the Volume down + Power button
combination.
After the device has booted into bootloader mode,
connect it to your PC.
Step 3: Open a new Terminal or Command Prompt
window, and navigate to the ‘google’ folder that you
created in Step 1. Before we start flashing the
factory image, we need to make sure that your
Nexus device is being detected by the PC.
fastboot devices
If you are using a Mac, then you need to prefix a “./”
before every Fastboot command. So, the above
command will look something like this on a Mac -:
./fastboot devices
The above command should confirm if your device is
indeed being detected by your PC or not. If it is,
then proceed to the steps below. If not, repeat the
steps above again. Make sure that you have properly
installed the drivers and are inside the correct
folder.
If you are running Windows, copy-paste the following
command in the command prompt window -:
flash-all.bat
On a Mac, copy-paste the following command -:
./flash-all.sh
The script will then automatically flash the full
factory image on your Nexus device. Once the
factory image has been flashed, your device will
automatically reboot. Keep in mind that the first boot
might take some time so please be patient.
If the flash-all.sh script gives you a fastboot not
found error on your Mac, open up the file in Text Edit
and add a “./” before every fastboot command.
The flash-all script included in the factory image
might not work for all. It has always been pretty
unreliable and has only worked once for me in the
last 2 years. If you are in the same boat as me, you
will have to flash each partition manually on your
device. This is slightly cumbersome though.
The command to manually flash a partition via
fastboot is “fastboot flash partition filename.img”. In
the factory image that you extracted in Step 1, you
will notice there is another ZIP file. Extract the
contents of that ZIP file inside the ‘google’ folder.
Now, its time to manually flash the partitions to your
Nexus device. We will first begin with the bootloader.
fastboot flash bootloader filename.img
Then, we will flash all other partitions. They don’t
necessarily need to be in the same order as I have
listed them below. The names of the image files in
the factory image will clearly indicate the partition
they are intended for as well.
fastboot flash boot filename.img
fastboot flash radio filename.img
fastboot flash recovery filename.img
fastboot flash userdata filename.img
fastboot flash system filename.img

Thank you very much I will try this today.

I couldn't flash all and when I flashed the bootloader it came up with failed bootloader is locked?

Enter this command to unlock the bootloader:
fastboot oem unlock
After unlocking, you can run flash-all.bat (or run manual fastboot commands to flash).

Possibly Bricked Pixel XL

Hi, I am i dire straits. I have a pixel xl running pure nexus, rooted and on tmobile. I am trying to get back to completely stock. i tried followig the instructions but somewhere I messed up. Currently phone will just bootloop. I went into cmd, typed adb devices, nothing came up so stupid me, I continued anyways with flash-all.bat, something went wrong in command prompt, then i proceeded to reboot from fastboot, this is where i am now. I have attached pictures of the command prompt screens and of the folder in adb fastboot on my pc that I think contained all the files. I do't know where I went wrong. If you can help, it would be greatly appreciated. I can only correspond via pc. Please, I hope someone can help me.
If someone has the time to walk me through step by step, it would much appreciated.

Doesnt looked bricked to me
maybe your factory image is incomplete.
Flash the parts individually see what happens.
Commands i use. note you need to use your own paths or copy mine
) Execute fastboot commands
fastboot flash bootloader c:\_PIXEL_XL_\bootloader.img
fastboot reboot-bootloader
fastboot flash radio c:\_PIXEL_XL_\radio.img
fastboot reboot-bootloader
fastboot flash boot_a c:\_PIXEL_XL_\boot.img
fastboot flash boot_b c:\_PIXEL_XL_\boot.img
fastboot flash system c:\_PIXEL_XL_\system.img
fastboot flash system_b c:\_PIXEL_XL_\system_other.img
fastboot flash vendor c:\_PIXEL_XL_\vendor.img
fastboot flash modem c:\_PIXEL_XL_\modem.img
fastboot reboot-bootloader
fastboot boot c:\_PIXEL_XL_\twrp.img
In TWRP, install twrp.zip
Reboot into the installed recovery
In TWRP, install supersu.zip <--- if you want to root.
5 Still in twrp flash verifiedboot signer.zip
6 Reboot

parakleet said:
Doesnt looked bricked to me
maybe your factory image is incomplete.
Flash the parts individually see what happens.
Commands i use. note you need to use your own paths or copy mine
) Execute fastboot commands
fastboot flash bootloader c:\_PIXEL_XL_\bootloader.img
fastboot reboot-bootloader
fastboot flash radio c:\_PIXEL_XL_\radio.img
fastboot reboot-bootloader
fastboot flash boot_a c:\_PIXEL_XL_\boot.img
fastboot flash boot_b c:\_PIXEL_XL_\boot.img
fastboot flash system c:\_PIXEL_XL_\system.img
fastboot flash system_b c:\_PIXEL_XL_\system_other.img
fastboot flash vendor c:\_PIXEL_XL_\vendor.img
fastboot flash modem c:\_PIXEL_XL_\modem.img
fastboot reboot-bootloader
fastboot boot c:\_PIXEL_XL_\twrp.img
In TWRP, install twrp.zip
Reboot into the installed recovery
In TWRP, install supersu.zip <--- if you want to root.
5 Still in twrp flash verifiedboot signer.zip
6 Reboot
Click to expand...
Click to collapse
No offence but i am lost by what you said, I am trying to get back to completely stock. Is part of my issue the fact that command prompt didn't detect my device? or no?
I'm not exactly sure what to do with the information you shared, sorry
I the tutorial i found it says to make sure the command prompt sees your device but doesnt say what to do when it doesnt see it.
Also, I downloaded the may factory image, i believe it was version O

Am I suppose to use the O image or the L image (verizon). I am on tmobile. I used the O image when i ran into trouble

jreink01 said:
Am I suppose to use the O image or the L image (verizon). I am on tmobile. I used the O image when i ran into trouble
Click to expand...
Click to collapse
If you did not get your phone from Verizon use this
7.1.2 (N2G47O, May 2017)
Download the zip
unpack all the zip files some are nested so unzipping one creates more keep unzipping until there are no more then gather the following img files
bootloader.img
radio.img
boot.img
system.img
system_other.img
vendor.img
modem.img
Some of those names are cut down as i hate typing long strings, jsut rename them as such.
Create a folder on root of c:\_PIXEL_XL_
put all the files there.
You will use way less files than you unpacked
once you have done that run the following commands
copy and paste
fastboot flash bootloader c:\_PIXEL_XL_\bootloader.img
fastboot reboot-bootloader
fastboot flash radio c:\_PIXEL_XL_\radio.img
fastboot reboot-bootloader
fastboot flash boot_a c:\_PIXEL_XL_\boot.img
fastboot flash boot_b c:\_PIXEL_XL_\boot.img
fastboot flash system c:\_PIXEL_XL_\system.img
fastboot flash system_b c:\_PIXEL_XL_\system_other.img
fastboot flash vendor c:\_PIXEL_XL_\vendor.img
fastboot flash modem c:\_PIXEL_XL_\modem.img
fastboot reboot
After last reboot just wait and you will be back at stock
if that doesnt work
Download latest version of TWRP place it in C:\_PIXEL_XL_
rename it twrp.img, again i hate typing long strings
from bootloader run
fastboot boot c:\_PIXEL_XL_\twrp.img
This will take you into twrp
you might need to wipe system and cache and data,
From memory the fourth entry at bottom is internal memory or user data, in any event if you do not check that your data stays on the phone.
Once you have wiped the other 3 rerun the fastboot commands and you will be back at stock
add the twrp and supersu commands from earlier to add root.
dont forget the signatureverify.img if you are doing that.
good luck.
you arent bricked
you just need to find the correct combination of steps to get your phone where you want it to be

Thanks for the response. I am having a hard time with this, the zip file i downloaded from the google website, when i open it, there are only 6 files, 1 of which is a zip file (marlin). When I open marlin it shows a bunch of files, none of which you mentioned. I am confused, was wondering if you would be nice enough to walk me through this over the phone, i would be really grateful.

Is there anyone that can walk me through this this on the phone, the more i try to understand this, the more cofused i get. pLeASE!!!!

jreink01 said:
Is there anyone that can walk me through this this on the phone, the more i try to understand this, the more cofused i get. pLeASE!!!!
Click to expand...
Click to collapse
Yes, i sent you a PM.

HALV0RS3N said:
Yes, i sent you a PM.
Click to expand...
Click to collapse
thanks, sent you my #

Okay so I had the exact problem yesterday. To to the Google developers site and download the official Google pixel or xl 7.1.2 nougut ota update. Once that's downloaded, go to your phone, I had all the exact same screens on my phone so it should work. Hold down the power button until it completely shuts down. Then hold the power and volume down to go to recovery mode, if it goes back to the ext 4 screen, try it again until it goes to recovery mode, then on command prompt type, fastboot boot twrp.img then once it's in twrp, go to advanced-then adb sideload and click both boxed and then swipe to enter sideload. Then on your computer, type adb sideload "file name for Google update" and hit enter. That should do the trick. Like I said, I had the exact same problem yesterday
---------- Post added at 06:56 PM ---------- Previous post was at 06:50 PM ----------
Also, I forgot to mention, download the twrp image file from the Internet. Shouldn't be hard to find just make sure it's the latest. Put that file in the adb file on your computer same with the Google update for your phone. Do not unzip either file. That's very important. DO NOT UNZIP THE UPDATE File. When you type in the twrp.img make sure you type img. And when you flash the update, make sure at the end of the file name you put
.zip ex( marlinpixelxl7.1.2.zip)

jreink01 said:
Hi, I am i dire straits. I have a pixel xl running pure nexus, rooted and on tmobile. I am trying to get back to completely stock. i tried followig the instructions but somewhere I messed up. Currently phone will just bootloop. I went into cmd, typed adb devices, nothing came up so stupid me, I continued anyways with flash-all.bat, something went wrong in command prompt, then i proceeded to reboot from fastboot, this is where i am now. I have attached pictures of the command prompt screens and of the folder in adb fastboot on my pc that I think contained all the files. I do't know where I went wrong. If you can help, it would be greatly appreciated. I can only correspond via pc. Please, I hope someone can help me.
If someone has the time to walk me through step by step, it would much appreciated.
Click to expand...
Click to collapse
Looking at your screen shot you didn't let the file finish flashing. It sticks at the "does not contain" for a bit before it continues.
You were doing it right. You just didn't wait.
If it wasn't going to work it would eventually give you a failure and jump to the command prompt.

jreink01 said:
Hi, I am i dire straits. I have a pixel xl running pure nexus, rooted and on tmobile. I am trying to get back to completely stock. i tried followig the instructions but somewhere I messed up. Currently phone will just bootloop. I went into cmd, typed adb devices, nothing came up so stupid me, I continued anyways with flash-all.bat, something went wrong in command prompt, then i proceeded to reboot from fastboot, this is where i am now. I have attached pictures of the command prompt screens and of the folder in adb fastboot on my pc that I think contained all the files. I do't know where I went wrong. If you can help, it would be greatly appreciated. I can only correspond via pc. Please, I hope someone can help me.
If someone has the time to walk me through step by step, it would much appreciated.
Click to expand...
Click to collapse
i had the same issue and this worked
https://forum.xda-developers.com/showpost.php?p=70972735&postcount=3
dont follow it word for word as that its not the XL version in the post.

RedBlueGreen said:
i had the same issue and this worked
https://forum.xda-developers.com/showpost.php?p=70972735&postcount=3
dont follow it word for word as that its not the XL version in the post.
Click to expand...
Click to collapse
OP was flashing to stock. Didn't let it finish though.