Related
Got an unbranded deisre which i have rooted, and installed defrost 1.6c. Can anyone point me towards what stock rom I would need to put it back the way it was originally.
If I did put the stock back on would it still be rooted?
Bootloader was 0.80 when i upgraded.
Had a look at the stock and confused as which one i would need.
OTA_Bravo_HTC_WWE_1.21.405.2-1.15.405.4_release_P4ohim1mtp6zggcyon.zip
Does this look ok?
memphisuklf said:
Got an unbranded deisre which i have rooted, and installed defrost 1.6c. Can anyone point me towards what stock rom I would need to put it back the way it was originally.
If I did put the stock back on would it still be rooted?
Bootloader was 0.80 when i upgraded.
Had a look at the stock and confused as which one i would need.
OTA_Bravo_HTC_WWE_1.21.405.2-1.15.405.4_release_P4ohim1mtp6zggcyon.zip
Does this look ok?
Click to expand...
Click to collapse
On this thread http://forum.xda-developers.com/showthread.php?t=695667
It shows all the stock ROMs, you must of been on the lateset one if your are on bootloader 0.80.xxxx
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe would be the one you need if you want to do it from the computer or OTA_Bravo_HTC_WWE_1.21.405.2-1.15.405.4_release_P4ohim1mtp6zggcyon.zip if obviously pushing
Yes you would lose root if you applied any of them
cheers for the reply,
pushing would mean doing it through rom manager into custom recovery wouldn't it and then wipe and installing it. Do i just put this rom on the root directory on my sd card and rename it update?
This then would put it back to its natural state and voiding warranty wouldn't it?
shoey-n said:
or OTA_Bravo_HTC_WWE_1.21.405.2-1.15.405.4_release_P4ohim1mtp6zggcyon.zip if obviously pushing
Click to expand...
Click to collapse
Don't use that one, it's an OTA update from 1.51.405.4 to 1.21.405.2. It contains only the changes between these two stock roms. I'd bet that'd really mess things up installed on top of defrost
Download this:
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.exe
It's the full 1.21.405.2 ROM, you will need to go back to a Sense ROM to run it though as you need HTC Sync...OR run this from recovery
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.zip
and it should do the same
memphisuklf said:
cheers for the reply,
pushing would mean doing it through rom manager into custom recovery wouldn't it and then wipe and installing it. Do i just put this rom on the root directory on my sd card and rename it update?
This then would put it back to its natural state and voiding warranty wouldn't it?
Click to expand...
Click to collapse
Putting the RUU ROM will put it completely back to normal restoring your warranty
Sent from my HTC Desire using XDA App
which one would i go for then and what procedure would I use. Any help appreciated.
ignore this post
Eddy, sorry a little confused.
I am on Defrost 1.6c at the moment. If I run the 1.21.405.2 stock from your second post in recovery, will that take me back to where I want to go?
EddyOS said:
Download this:
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.exe
It's the full 1.21.405.2 ROM, you will need to go back to a Sense ROM to run it though as you need HTC Sync...OR run this from recovery
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.zip
and it should do the same
Click to expand...
Click to collapse
The 2nd link (the ZIP) should flash you back to stock...if you wanna use the full RUU you'd first need to go back to a custom Sense-based ROM (like MCR v3.1)
EddyOS said:
The 2nd link (the ZIP) should flash you back to stock...if you wanna use the full RUU you'd first need to go back to a custom Sense-based ROM (like MCR v3.1)
Click to expand...
Click to collapse
Sorry new to all this. Tried the second link zip which I put on my SD card. Then went into recovery with rom manager, erased and then tried to flash the zip from SD card but kept on getting an error.
Am I doing something wrong?
Bump
Sent from my HTC Desire using XDA App
Hello,
I am currently running rooted stock rom with HTC Dev unlocked bootloader with clockwork recovery. When I tried to download and install OTA it of course fails. I installed stock recovery, same thing installation always stucks at 1/3. I tried relocking bootloader, i tried un root. And I even tried to install Maximus rom (after unlocking bootloader and installing clockwork again) and I cant. Is there something that I messed up?
Is it possible I am using wrong stock recovery image?
Go with the ruu. And why would you think it's not standard problem?
Sent from my HTC One X using Tapatalk 2
PAGOT said:
Go with the ruu. And why would you think it's not standard problem?
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I installed RUU (the one that doesn't contain latest update) and same thing happened, isntallation just freezes.
I was under impression that this problem usually happens when there is no stock recovery or when USB cable remains plugged in, which is not my case.
marijan_e said:
I installed RUU (the one that doesn't contain latest update) and same thing happened, isntallation just freezes.
I was under impression that this problem usually happens when there is no stock recovery or when USB cable remains plugged in, which is not my case.
Click to expand...
Click to collapse
well for me it stopped also till I flashed the correct ruu. Without charge or bad recovery or unlocked.
Now I am bit confused. The ruu works and the ota after fails or the ruu fails the same way as the ota?
Sent from my HTC One X using Tapatalk 2
not sure whic RUU I installed but it worked on device, OTA fails with stock recovery, no matter if i have unlocked or relocked bootloader
marijan_e said:
not sure whic RUU I installed but it worked on device, OTA fails with stock recovery, no matter if i have unlocked or relocked bootloader
Click to expand...
Click to collapse
if you have flashed any system mods or deleted any system apps the ota will fail
bogfather said:
if you have flashed any system mods or deleted any system apps the ota will fail
Click to expand...
Click to collapse
i just rooted after installing stock ruu, then i reverted to stock recovery and locked bootloader
First use htc One x toolkit wich is found here somwwhere. Downliad the latest 2.17 RUU.exe. with toolkit lock your bootloader.(of you are using a custom rom it reboots back into bootloader) use the fastboot option and then run the latest 2.17 RUU. Lower versions don't work
Hope you will succeed
Sent from my HTC One X
Hey guys , im new here and i need some help from you.
I have an HTC One X , not rooted or something but i wanna get rid of the vodafone logo on start up.
I dont want to root it for now and i was just wondering if i can flash this firmare ive found HTC_Europe_2.17.401.2 on this thread
[ROM] Endeavor Shipped ROM Collection http://forum.xda-developers.com/showthread.php?p=33779342 and how can i flash this?
Ive tried to open the file and it tells me to connect the phone but i dont wanna do something wrong and came here to ask first.
Thank you very much in advance!
Cheers o/
canibus2677 said:
Hey guys , im new here and i need some help from you.
I have an HTC One X , not rooted or something but i wanna get rid of the vodafone logo on start up.
I dont want to root it for now and i was just wondering if i can flash this firmare ive found HTC_Europe_2.17.401.2 on this thread
[ROM] Endeavor Shipped ROM Collection http://forum.xda-developers.com/showthread.php?p=33779342 and how can i flash this?
Ive tried to open the file and it tells me to connect the phone but i dont wanna do something wrong and came here to ask first.
Thank you very much in advance!
Cheers o/
Click to expand...
Click to collapse
that is a normal RUU, you have to run it on your PC with the phone connected, it won't void your warranty cause RUU are released by HTC... we can say that it is a sort of upgrade that must be done from the PC go on with that don't worry... does the vodafone logo appears on bootanimation or splash screen? cause if it is a splash screen you can't change that due to NON S-OFFed phone
Do I need to put the phone in some downloading mode or it must be just on?
Thanks for your reply.
Well when I turn on my phone I get the HTC logo, then that Vodafone logo and then again the HTC logo with the beats audio.
canibus2677 said:
Do I need to put the phone in some downloading mode or it must be just on?
Thanks for your reply.
Well when I turn on my phone I get the HTC logo, then that Vodafone logo and then again the HTC logo with the beats audio.
Click to expand...
Click to collapse
no, you can both connect the phone while is booted up or while it is in bootloader mode, but i would recommend the second one... the vodafone logo, from what i've understood, is part of the bootanimation so it is easly removable (only if you have root)
Ok, how about if I root the phone remove the logo then unroot and flash the ruu?
Is this possible, cause I still want to use the official firmware.
Thanks again mate for helping me out on this.
I used to have an SGS2 and it was way more simple to flash it.
canibus2677 said:
Ok, how about if I root the phone remove the logo then unroot and flash the ruu?
Is this possible, cause I still want to use the official firmware.
Thanks again mate for helping me out on this.
I used to have an SGS2 and it was way more simple to flash it.
Click to expand...
Click to collapse
That won't work because if the ruu has the bootanimation it will flash that too...
canibus2677 said:
Ok, how about if I root the phone remove the logo then unroot and flash the ruu?
Is this possible, cause I still want to use the official firmware.
Click to expand...
Click to collapse
What's your cid? (use cid getter to find out) Maybe your hox is branded. Then you are unable to remove the logo by flashing the ruu.
Sent from my HTC One X using xda app-developers app
I was thinking to flash a different ruu than the one i have right now, the Europe ruu must be clean i guess.
CID VODAP102
While flashing the ruu the cid is checked. If it does not fit to the cids its made for it won't flash.
Sent from my HTC One X using xda app-developers app
canibus2677 said:
I was thinking to flash a different ruu than the one i have right now, the Europe ruu must be clean i guess.
CID VODAP102
Click to expand...
Click to collapse
You can't flash any RUU... You have to flash the or for your specific phone
Ok, so ive rooted my phone flashed the boot.img and OrDroidX_1.7.0. thanks to matt95
Its all good now, just wonder when i can install Jelly Bean and how can i know ?
CID VODAP102
canibus2677 said:
Ok, so ive rooted my phone flashed the boot.img and OrDroidX_1.7.0. thanks to matt95
Its all good now, just wonder when i can install Jelly Bean and how can i know ?
CID VODAP102
Click to expand...
Click to collapse
probably you'll find your firmware upgrade in this thread but that will require a lot of time!
Ok, so i saw last night that the latest firmware + hboot is out for my Phone CID VODAP102 and ive decided to flash this firmware with hboot 1.3.6 and install the latest Ordroid Rom 12.1.0, from here http://forum.xda-developers.com/showthread.php?t=1836919
I was just wondering why in the Ordroid thread says that you need at least 1.3.1 hboot and when you install Ordroid it says that you need hboot 1.3.9?
Anyway ive installed it and i dont have any issue so far, just a lil change i guess that it comes with the JB.... i guess.... is this normal when you connect the USB cable from pc to phone not to get the option to choose the connection? (charge only , disk drive...etc)
If anyone have this Rom please confirm this to me.
Thanks and Merry Christmas to all of you guys!!
Yes those options have been removed in JB.
Its same for everyone who has updated to JB.
faiz02 said:
Yes those options have been removed in JB.
Its same for everyone who has updated to JB.
Click to expand...
Click to collapse
Thanks for your replay!
I see you're using Maximus ROM how's that?
Any difference between Maximus and Ordroid ?
Right now i am on insert coin 15.0.0
All custom roms are pretty much same be it maximus or ordroid.. few of them are themed and rest based on stock look.
if you want a fully themed customized ROM with a lot of Tweaks, wait for the JB Viper X ROM
getapatalked mit meinem HTC One X
Thanks guys
thanks all , my hox is same, waiting for the JB Viper X ROM :laugh:
Hi guys.
Hoping you can help me.
I rooted my DHD some time ago, with help from this forum, and was running the RCmix3D rom.
Well I have upgraded to an HTC One X, and a friend would like to buy my DHD, so. I thought I’d factory reset the phone.
Before I did that though I did a nandroid backup through CWM recovery.
After the nandroid backup, I rebooted into the ROM, factory reset the phone, however it then just booted through the White HTC screen into a black screen with the word ‘android’ in the middle.
Now, I didn’t panic, and I left the black screen for a while, but it didn’t change for ages.
So I pulled the battery, went back into CWM Recovery, and tried to restore, however, the restore didn’t take!
So I thought I’d just download another ROM, and flash that, but THAT hasn’t worked!!!
So I’m stuck without a backup and without a ROM,
I got the DHD on day of release so I guess it had Froyo on it!
Can I just download an RUU for this device and run that or are there additional steps that I would need to perform before that?
Thank you in advance.
Greg.
TeamDraven said:
Hi guys.
Hoping you can help me.
I rooted my DHD some time ago, with help from this forum, and was running the RCmix3D rom.
Well I have upgraded to an HTC One X, and a friend would like to buy my DHD, so. I thought I’d factory reset the phone.
Before I did that though I did a nandroid backup through CWM recovery.
After the nandroid backup, I rebooted into the ROM, factory reset the phone, however it then just booted through the White HTC screen into a black screen with the word ‘android’ in the middle.
Now, I didn’t panic, and I left the black screen for a while, but it didn’t change for ages.
So I pulled the battery, went back into CWM Recovery, and tried to restore, however, the restore didn’t take!
So I thought I’d just download another ROM, and flash that, but THAT hasn’t worked!!!
So I’m stuck without a backup and without a ROM,
I got the DHD on day of release so I guess it had Froyo on it!
Can I just download an RUU for this device and run that or are there additional steps that I would need to perform before that?
Thank you in advance.
Greg.
Click to expand...
Click to collapse
Greg, Factory reset only works when you are stock. As you were running a custom rom, you have just deleted the rom from your phone. You will need to flash a RUU to revert it to stock.
I don't actually know why you couldm´t flash a custom rom, but it should work as long as you are S-OFF.
glevitan said:
Greg, Factory reset only works when you are stock. As you were running a custom rom, you have just deleted the rom from your phone. You will need to flash a RUU to revert it to stock.
I don't actually know why you couldm´t flash a custom rom, but it should work as long as you are S-OFF.
Click to expand...
Click to collapse
Doh!
Cheers Brother.
The reason is that I'm not sure the new user would be ok with teh extra finctionality, and I'd worry they much it up (Much like I have done)
I still con't quite understand why it wouldnt flash a new ROM though
Ok.
When flashing an RUU, can I do that from the boot loader?
cheers for yor help.
Greg.
TeamDraven said:
Doh!
Cheers Brother.
The reason is that I'm not sure the new user would be ok with teh extra finctionality, and I'd worry they much it up (Much like I have done)
I still con't quite understand why it wouldnt flash a new ROM though
Ok.
When flashing an RUU, can I do that from the boot loader?
cheers for yor help.
Greg.
Click to expand...
Click to collapse
Yes, you have two choices, or do it in the PD98IMG.zip way or flash it in fastboot. If you are S-OFF, you can flash any RUU, but I suggest and unbranded one. Don't flash a Froyo RUU or you will be in troubles.
On how to flash a RUU from fastboot, check the guide in my signature....:good:
Ok dude. I hear you.
Could you give a brief explanation on why the Froyo RUU would be bad?
Cheers brother.
Love your Avi.
Greg.
Sent from my HTC One X using Tapatalk 2
TeamDraven said:
Ok dude. I hear you.
Could you give a brief explanation on why the Froyo RUU would be bad?
Cheers brother.
Love your Avi.
Greg.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
If you are using a Gingerbread hboot and flash a froyo RUU then your hboot will work in super slow motion and might take half an hour to boot. And belive me fixing that is not easy nor fun...
Were you able to flash a ruu??
Hey dude.
Not tried yet, munching dinner and watching some Sons of Anarchy at the moment.
Will let you know ow how it goes though.
Greg.
Sent from my HTC One X using Tapatalk 2
Ok here a photo of the bootloader.
So as you can see I have S-off
Just need to find the right RUU.
Sent from my HTC One X using Tapatalk 2
glevitan said:
If you are using a Gingerbread hboot and flash a froyo RUU then your hboot will work in super slow motion and might take half an hour to boot. And belive me fixing that is not easy nor fun...
Were you able to flash a ruu??
Click to expand...
Click to collapse
Hey dude.
Another few questions,
1) How do I know if I am using a GB hboot? Would a new hboot have been written when the GB OTA update came?
2) How can I tell whuch RUU is a GB RUU without the name being in the title of the RUU?
I.e. RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed.zip
Thank you again.
Greg.
Oh, and I think I have found out why I can't flash a different ROM like ARHD, I'm using CWM recovery, the instructions for ARHD state that you are only to use EXT4 recovery.
Bum!
Greg.
TeamDraven said:
Oh, and I think I have found out why I can't flash a different ROM like ARHD, I'm using CWM recovery, the instructions for ARHD state that you are only to use EXT4 recovery.
Bum!
Greg.
Click to expand...
Click to collapse
That shouldn't be the issue. Anyway, try flashing a Ruu And see what happens. I will find an unbranded one one that works for You. Try this one And report back.
http://https://www.dropbox.com/s/9xv5utzgvr4ov55/PD98IMG-GB2.zip
Cheers dude.
Just downloaded it.
Do I need to rename the file to just "PD98IMG.zip" and drop the "-GB2" ?
Cheers.
Greg.
Yep.
I needed to rename it.
Flashing it now.
Cheers.
Greg.
Dude.
Thank you for all your help.
It's all up and running Stock, just running the OTA update.
Thank you brother.
Greg.
TeamDraven said:
Dude.
Thank you for all your help.
It's all up and running Stock, just running the OTA update.
Thank you brother.
Greg.
Click to expand...
Click to collapse
Glad you made it...enjoy!
no rom, no backup
hi Guys,
I got same problem...No Rom, No Backup, but can boot into CWM Recovery, but my DHD is S-ON..
Hope, you can help me, thanks in advance
alpsdhd said:
hi Guys,
I got same problem...No Rom, No Backup, but can boot into CWM Recovery, but my DHD is S-ON..
Hope, you can help me, thanks in advance
Click to expand...
Click to collapse
I really don't understand in all of that, but I just went through a very long process of rooting my phone etc.
and one of the million things I stumbled upon was this time I flashed a rom using CWM and the rom was corrupted..
I was thankful that CWM had the option to connect the phone via usb storage, [hard drive thing, so you could transfer files from comp to dhd]
So I just downloaded the rom again and placed it on the phone and flashed it using CWM.
I guess it might help you since you have CWM [and if you have CWM I guess you're rooted?] so you might try flashing a non-stock rom.
But I'm not deep into this stuff and don't really know, so you can try but I'm not sure it'll work.
no rom, no backup
YagFrazier said:
I really don't understand in all of that, but I just went through a very long process of rooting my phone etc.
and one of the million things I stumbled upon was this time I flashed a rom using CWM and the rom was corrupted..
I was thankful that CWM had the option to connect the phone via usb storage, [hard drive thing, so you could transfer files from comp to dhd]
So I just downloaded the rom again and placed it on the phone and flashed it using CWM.
I guess it might help you since you have CWM [and if you have CWM I guess you're rooted?] so you might try flashing a non-stock rom.
But I'm not deep into this stuff and don't really know, so you can try but I'm not sure it'll work.
Click to expand...
Click to collapse
Thanks for the reply, I think my phone is rooted, but my problem is, it is S-ON, with that, I got difficulties of finding the right ROM.. I tried this..
install clockworkmod recovery wipe all data factory reset install that custom rom
http://forum.xda-developers.com/show...=blackout+2+3+
DO NOT BOOT THE PHONE GO IN BOOTLOADER
open zip and take boot.img go in bootloader in fastboot and open cmd
fastboot flash boot boot.img
boot the phone and then close it go in bootloader and relocked
install official ruu
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.6 0.29_26.14.04.28_M_release_225512_signed.exe
got no success co'z I can't download the boot.img from this link http://www.villainrom.co.uk/kendon/dhd/boot.img and from this link http://minus.com/mIc6tkSGg/, so after I flash blackout+2+3+ I'm still stuck in white screen with HTC logo
my phone (htc one x) version is for hong kong cid:622
right now im in Android_Revolution_HD-One_X_18.0 rom and I want to come back to stock
I have RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Rad io_5.1204.162.29_release_299865_signed file and I relock my phone and start run this ruu file and everything alright but when program start to check my phone version give error for phone version but im 100% sure that version of software and phone is same.
when my phone in orginal rom, ota update exactly come with this version and that time also have same problem and have error in phone version
any one have an idea? I really need to come back in orginal software
fastboot getvar version-main
And the actual error message please.
BenPope said:
fastboot getvar version-main
And the actual error message please.
Click to expand...
Click to collapse
2.17.708.7
uturn2316 said:
my phone (htc one x) version is for hong kong cid:622
right now im in Android_Revolution_HD-One_X_18.0 rom and I want to come back to stock
I have RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Rad io_5.1204.162.29_release_299865_signed file and I relock my phone and start run this ruu file and everything alright but when program start to check my phone version give error for phone version but im 100% sure that version of software and phone is same.
when my phone in orginal rom, ota update exactly come with this version and that time also have same problem and have error in phone version
any one have an idea? I really need to come back in orginal software
Click to expand...
Click to collapse
Can you please upload it?
I cant find this ruu.
Would be regretful...
you must first install the original boot.img + original recovery.img and then relock your bootloader , And try ...
samooorje said:
you must first install the original boot.img + original recovery.img and then relock your bootloader , And try ...
Click to expand...
Click to collapse
This information is false. Youonly need to relock bootloader.
TToivanen said:
This information is false. Youonly need to relock bootloader.
Click to expand...
Click to collapse
I have the same problem in ICS , after installing the original recovery and lock the bootloader the problem gone.
Samooorje is right but TT actually also, in some cases the ruu fails and after flashing back the stock recoveryand/or the stock boot.img they had succes. But this is not applied to everybody, i for instance did not had to reflash anything before running the JB ruu. Still have no clue why this is. :thumbup:
Sent from my GT-P5110 using xda app-developers app
back to stock for OTA
HTC ONE X on Stock Jelly Bean after i flashed JB viper x 3.3.3, everything was working fine. I decided to try an OTA update, reflashing the stock ICS back using Custom Ruu, wich is an awsome project. i returned to stock ICS 4.0.3, reflashed stock recovery, i tryied an ota update, i was able to get it ( not JB, i think it was something else, maybe ICS 4.0.4), than stuck in bootloop....in fast boot it was an red warning message, about recovery i think...i repeat the whole procedure once more, i got ICS 4.0.3 functionally, then OTA , after again boot loop. what do you think is the cause? could be the recovery? i flashed the recovery extracted from original stock ICS 4.0.3 rom
( RUU_ENDEAVOR_U_ICS_40_TMO_DE_1.29.111.11_Radio_1.1204.105.14_release_260730_signed)...i didn t try the JB stock recovery
now i m on ViperX again
hboot 1.36, CID T-MOB101
mightymike2012 said:
HTC ONE X on Stock Jelly Bean after i flashed JB viper x 3.3.3, everything was working fine. I decided to try an OTA update, reflashing the stock ICS back using Custom Ruu, wich is an awsome project. i returned to stock ICS 4.0.3, reflashed stock recovery, i tryied an ota update, i was able to get it ( not JB, i think it was something else, maybe ICS 4.0.4), than stuck in bootloop....in fast boot it was an red warning message, about recovery i think...i repeat the whole procedure once more, i got ICS 4.0.3 functionally, then OTA , after again boot loop. what do you think is the cause? could be the recovery? i flashed the recovery extracted from original stock ICS 4.0.3 rom
( RUU_ENDEAVOR_U_ICS_40_TMO_DE_1.29.111.11_Radio_1.1204.105.14_release_260730_signed)...i didn t try the JB stock recovery
now i m on ViperX again
hboot 1.36, CID T-MOB101
Click to expand...
Click to collapse
Are you posting this everywhere now ??? Stay in one thread. I will not follow you around here you know :banghead:
If you answered my question in the other thread we would be a lot further by now .....