Related
ok well i downloaded the new eg30 tar and tried to use mobile odin since i didnt have access to a pc right away. well it fubard on me,and so i got home and whent to flash through odin.well in my haste i flashed it in phone instead of pda.
Once i realized y i was getting countious fails i flashed it properly and yay the phone started and i thought all was good.well its not i put my phone back into odin mode and reflashed it again along with pit,modem,phone efs clear, and re partition hoping this would fix my phone. well ofcourse it did not im know stuck with everything working except for radio my phone displays this on my screen:
CHANNEL:30600
SIO MODE: U1_DM USB2_NULL
S/W VERSION: SPH-D710.EG30
BASEBAND VERSION: S: D710.0.3S.EG30
H/W VERSION: H: D710.0.3S.Q
When phone is plugged into pc it says on my phone MTP-CONNECTED and on my pc it labels it as portable device..... Idk if this helps or not
edit: well i have entered this *#767*3855# and it has gotten me to atleast a signal bar but says im roaming and cant update profile or anything.....says error no service error...
Edit: well sprint tried to get my phone to restore profile n that.I got my msl code but phone says its wrong so know they say I need to drive an hr to a sprint store nothing else they can do....
Edit: know it says im on channel 0...
When i tried to place a call it stated welcome to verizon ....
Edit: I have used the trick found to upload cutom prl and i am know on sprint. and the msl code that sprint gave me works with qpst but not the software on the phone? Is there a way to edit the profile info so i can get my stuff set back up using qpst?
Edit: when i run the ## rtn i get a list of things they are as followed
Mobile Number: 000-000-0016
MSID: 000-000-0016
Software version GINGERBREAD.EG30
Baseband version: S: D710.0.35.EG30
Hardware version: D710.0.3
Prl Version: prl:11115
PRI Version: PRI:0X01
Pcb Version: UknownSMDKC210.000C
Reconditioned status:NO
Activation Date: 00/00/1981/ 00:00:00
I KNOW THIS IS ALOT OF INFO BUT TRYING TO GIVE AS MUCH AS I CAN SORRY...
How do i fix this and get out of this mode?
I believe you just need to grab one of the .bin files (like the new EG30.bin) and put THAT in phone. That's where I flashed my Modem.bin to, so I'd guess that's what you need to do.
yea ive tried that to no aval....ty for trying to help tho...
bigfdaddy said:
yea ive tried that to no aval....ty for trying to help tho...
Click to expand...
Click to collapse
Has anyone tied a FULL tar together that includes the ROM, modem, and kernel? Maybe that would get you out of that because it would overwrite everything in one shot. When I last flashed the stock tar it still wasn't complete so my apps and modem remained. A full tar might set everything back to out-of-the-box condition. Let me see if one is posted yet..
Sent from my SPH-D710 using xda premium
JohnCorleone said:
Has anyone tied a FULL tar together that includes the ROM, modem, and kernel? Maybe that would get you out of that because it would overwrite everything in one shot. When I last flashed the stock tar it still wasn't complete so my apps and modem remained. A full tar might set everything back to out-of-the-box condition. Let me see if one is posted yet..
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Ive used the one tar that acs released to restore phone comepletley back to stock...it was 527mb I think give or take a few mb....and it hasnt helped either....
Sent from my SPH-D710 using XDA App
bigfdaddy said:
Ive used the one tar that acs released to restore phone comepletley back to stock...it was 527mb I think give or take a few mb....and it hasnt helped either....
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Did that include a modem? If it did, it must have been EG12 because we couldn't get back to EG30 until tonight. I am tired so I may be missing something but there is a way to fix this. I walked someone who flashed a GSM radio on a CDMA Nexus and we saved that. I know there's a way but I may need to sleep on it.
Sent from my SPH-D710 using xda premium
i think i have figured it out y i cant use my msl code they supplied me... my phone doesnt register the true esn hex,esn dec.....so it has a diffrent number on the phone then what it shows up in their computers...know i have all the infowritten on a piece of paper here infront of me.How do i put my numbers back in....
JohnCorleone said:
Did that include a modem? If it did, it must have been EG12 because we couldn't get back to EG30 until tonight. I am tired so I may be missing something but there is a way to fix this. I walked someone who flashed a GSM radio on a CDMA Nexus and we saved that. I know there's a way but I may need to sleep on it.
Sent from my SPH-D710 using xda premium[/QUOTE
Yea it did and i have flashed from eg31-eg30-ek02 and nothing has worked yet.
I know in cdma workshop it says hardware unkown or software unknown i cant remember getting way to late....
Click to expand...
Click to collapse
well i gave up and gave in....called sprint and amazon and know i got brand knew pretty phone sitting here yay...was going through phone and flashing withdrawls....
bigfdaddy said:
well i gave up and gave in....called sprint and amazon and know i got brand knew pretty phone sitting here yay...was going through phone and flashing withdrawls....
Click to expand...
Click to collapse
Glad you got a new one. I guess that's the best possible fix...lol
Sent from my SPH-D710 using xda premium
Lol yea n didn't cost me a penny and they overnighted it....
Sent from my SPH-D710 using xda premium
This has happened to me and i have searched for anything on this but no luck... did the same thing with odin
I have the same problem on my samsung, probbaly caused by a bad flash anyone find a solution
i will post if i find one, you can install another launcher over it that will hide it.
Update: ive solved it. Unlike some of the leechers that frequent here, ive posted a fix at this location.
http://androidforums.com/samsung-vi...phones-maybe-gsm-devices-too.html#post4626645
Well, from the day one i bought my nexus i had the " unknown baseband " in the About screen of my GSM unlocked NEXUS ! ... I dunno how but i left my phone with sim card inserted for some hours and suddenly i noticed that i have a signal and i checked to see the baseband is identified as xxkk6. Now i downloaded the Factory image from google and i flashed it using the Nexus Toolbox and now i dont have any baseband again.
Tried to flash the baseband only again with no luck, It only shows in the fastboot mode but when the phone is in android mode or ( normal mod ) it shows as unknown!
Tried to flash the UGLA4 baseband and the problem persists!
What should i do now ???
Try to flash back to google stock rom via Galaxy Nexus Toolkit from mskip :
http://forum.xda-developers.com/showthread.php?t=1392310
Download google stock image here :
http://code.google.com/android/nexus/images.html
Then, using GNex Toolkit again to root, unlock bootloader, etc and flash any baseband from this thread below to test :
http://forum.xda-developers.com/showthread.php?t=1405345
i already did that and still not working!
I tried flashing the stock rom over and over , ulnocked , rooted and flashed the baseband file alone and nothing works!
i tried to flash ugla4 and xxkk6 basebands but both didn't work and i only can see them in the fastboot mode info
If you can't seem to get it to work, try returning it to the vendor.
As last resort you can try with ODIN it might work...
code777 said:
If you can't seem to get it to work, try returning it to the vendor.
As last resort you can try with ODIN it might work...
Click to expand...
Click to collapse
I can't return it as i bought it with no warranty from an online store in my country ...
Ok, how can i use odin to restore it ! i mean i need a pit file and the other files right? where can i get them from ?
another thing, do i find the files if i extracted the factory image
thank you!
Install cwm and flash the baseband from there. Should work. Search cwm touch in the forum.
Sent from my Galaxy Nexus using xda premium
M7amad90 said:
I can't return it as i bought it with no warranty from an online store in my country ...
Ok, how can i use odin to restore it ! i mean i need a pit file and the other files right? where can i get them from ?
another thing, do i find the files if i extracted the factory image
thank you!
Click to expand...
Click to collapse
That doesn't mean it has no warranty contact your country Samsung warranty service and explain the situation it must have warranty!
I tried flashing it with CWM and nothing seems to work !
Am i the only one who has this problem ? is it hardware related or what because as i said it was working before and i was able to make and receive calls and data ..
It wasn't workning when i first turned on the phone when i bought it but i was playing around with the setting and apps and i remember having an OTA update from 4.0.1 to 4.0.2 and after 2 or 3 hours it started to work ! just like that !
btw i flashed the old 4.0.1 (ITL41F) factory image and i updated OTA now to 4.0.2 ICL53F but still unknown baseband
are you using a custom rom on the phone?
if you are...you may have installed a rom for the LTE/CDMA phone and not for your GSM phone..
that is why my baseband said UNKNOWN......I had a LTE and I install a GSM rom by mistake...
try installing a custom GSM rom
M7amad90 said:
I tried flashing it with CWM and nothing seems to work !
Am i the only one who has this problem ? is it hardware related or what because as i said it was working before and i was able to make and receive calls and data ..
It wasn't workning when i first turned on the phone when i bought it but i was playing around with the setting and apps and i remember having an OTA update from 4.0.1 to 4.0.2 and after 2 or 3 hours it started to work ! just like that !
btw i flashed the old 4.0.1 (ITL41F) factory image and i updated OTA now to 4.0.2 ICL53F but still unknown baseband
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1398296
here there is a similar thread...somene talk about a corrupted efs partition (try to search something about it), someone just flashed a new radio and solved it
did you also tried to power off the phone and pull the battery for a while? it is a sort of software reset..may work sometimes..
Sounds like your EFS may be corrupted.
There is an app for the I9100 that can repair corrupted EFS's, and it can be done via adb as well, but I'm not sure about the applicability towards the GNex.
Just for reference, I am in no way suggesting you do this, but perhaps someone else can chime in: http://forum.xda-developers.com/showpost.php?p=17587351&postcount=1
hogowner said:
are you using a custom rom on the phone?
if you are...you may have installed a rom for the LTE/CDMA phone and not for your GSM phone..
that is why my baseband said UNKNOWN......I had a LTE and I install a GSM rom by mistake...
try installing a custom GSM rom
Click to expand...
Click to collapse
i am using a gsm factory room and and my nexus is GSM Nexus !
Ok could you please tell me what is the best stable room for GSM Gnex cause there are a lot of them !
M7amad90 said:
i am using a gsm factory room and and my nexus is GSM Nexus !
Ok could you please tell me what is the best stable room for GSM Gnex cause there are a lot of them !
Click to expand...
Click to collapse
I may have jumped the gun a bit, with the i9100 an unknown baseband typically meant a corrupted efs. Do you still have signal and an imei #?
Sent from my Galaxy Nexus using xda premium
Ok i just checked my imei by *#06# and it shows nothing too !!! no numbers at all !! does it mean the it is efs corrupted partition ???
M7amad90 said:
Ok i just checked my imei by *#06# and it shows nothing too !!! no numbers at all !! does it mean the it is efs corrupted partition ???
Click to expand...
Click to collapse
Likely, but again I haven't messed around with the EFS on the GNex yet. Hopefully someone with more knowledge can chime in and get you sorted out.
mudferret said:
I may have jumped the gun a bit, with the i9100 an unknown baseband typically meant a corrupted efs. Do you still have signal and an imei #?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Btw i didn't back up anything and i don't know how to fix the EFS thing but i know how to use odin and adb a little bit
i have this issue suddenly with the radio of 4.0.2 and fixed it by flashing 4.0.1 radio.
never mind .. i got another Gnex and everything is fine now !!! u can't fix it but in samsung service centers
Please Note: No other method listed in the GN2, GS3 forums work for this particular problem. I, as well as a few others have had this happen when flashing different ROMs. I have no idea what causes it but I do have an idea as to how to fix it. I just can't because what I need seems to be disabled in the phone.
Also, I did make a backup of my EFS and a restore does not fix this particular problem.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
Problem #3:
And probably the biggest problem: ADB does not recognize the phone. ADB debugging is enabled on the phone in Developer Options but the icon on the notification button doesn't appear. Nor does ADB recognize the phone in recovery. So therefor I cannot transfer files this way either. "nvbackup/nvrestore" can not be used because of this either.
The following methods have all been tried and have failed. Yes, I know what I am doing,
http://forum.xda-developers.com/showthread.php?t=1867442
http://forum.xda-developers.com/showthread.php?t=1852255
http://forum.gsmhosting.com/vbb/f606/tutorial-galaxy-s3-backup-restore-imei-without-root-1513909/
I fell victim to #1 the IMEI wipeout I had to take my phone back for a replacement
Sent from my SPH-L900 using xda premium
Me too. ..
Sent from my MASSIVE Galaxy Note® II...*
mackentosh said:
I fell victim to #1 the IMEI wipeout I had to take my phone back for a replacement
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
but how did it happened ? can u please explain steps what u did that wiped yr imei?
t3project said:
Please Note: No other method listed in the GN2, GS3 forums work for this particular problem. I, as well as a few others have had this happen when flashing different ROMs. I have no idea what causes it but I do have an idea as to how to fix it. I just can't because what I need seems to be disabled in the phone.
Also, I did make a backup of my EFS and a restore does not fix this particular problem.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
Problem #3:
And probably the biggest problem: ADB does not recognize the phone. ADB debugging is enabled on the phone in Developer Options but the icon on the notification button doesn't appear. Nor does ADB recognize the phone in recovery. So therefor I cannot transfer files this way either. "nvbackup/nvrestore" can not be used because of this either.
The following methods have all been tried and have failed. Yes, I know what I am doing,
http://forum.xda-developers.com/showthread.php?t=1867442
http://forum.xda-developers.com/showthread.php?t=1852255
http://forum.gsmhosting.com/vbb/f606/tutorial-galaxy-s3-backup-restore-imei-without-root-1513909/
Click to expand...
Click to collapse
i got the same problem with tmobile ver the problem is the partition i did tried to repartition in odin with gt-7100 pit file it did not work
can you see your storge and see your internal sd space
sorry for my english
An fyi when u get ur baseband back 3g will not work. I was able to get mine all back and working but I was always on 1x. T3 hit me up in gtalk.
Sent from my SPH-L900 using Tapatalk 2
gotojanoo said:
but how did it happened ? can u please explain steps what u did that wiped yr imei?
Click to expand...
Click to collapse
Well I was testing a rom for someone, I wont tell which rom but he said it was the "in call recorder" he added. He's got it fixed now but it did wipe everything. I managed to restore it back to stock with no root but it bricked after that. Now I see why carriers dont like to unlock bootloaders cause of people bricking their phone and taking them back
Sent from my SPH-L900 using xda premium
t3project said:
Please Note: No other method listed in the GN2, GS3 forums work for this particular problem. I, as well as a few others have had this happen when flashing different ROMs. I have no idea what causes it but I do have an idea as to how to fix it. I just can't because what I need seems to be disabled in the phone.
Also, I did make a backup of my EFS and a restore does not fix this particular problem.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
Problem #3:
And probably the biggest problem: ADB does not recognize the phone. ADB debugging is enabled on the phone in Developer Options but the icon on the notification button doesn't appear. Nor does ADB recognize the phone in recovery. So therefor I cannot transfer files this way either. "nvbackup/nvrestore" can not be used because of this either.
The following methods have all been tried and have failed. Yes, I know what I am doing,
http://forum.xda-developers.com/showthread.php?t=1867442
http://forum.xda-developers.com/showthread.php?t=1852255
http://forum.gsmhosting.com/vbb/f606/tutorial-galaxy-s3-backup-restore-imei-without-root-1513909/
Click to expand...
Click to collapse
You care to clarify which ROM you flashed in particular caused this to happen so that we don't replicate your problem? I want to assume it's your own ROM but just want to make sure.
mackentosh said:
Well I was testing a rom for someone, I wont tell which rom but he said it was the "in call recorder" he added. He's got it fixed now but it did wipe everything. I managed to restore it back to stock with no root but it bricked after that. Now I see why carriers dont like to unlock bootloaders cause of people bricking their phone and taking them back
Click to expand...
Click to collapse
Uhh.. no offense to anyone, but if we have a rogue ROM that's bricking phones, we need to know in case it's floating around somewhere.
Also, (and again, not to start any negativity, just curious) the general feel of this thread was random bricking from flashing any ROM, which is very scary and cause for alarm. But according to the quoted post I'm gathering now that this is an issue directly related to accidents within a specific ROM?
ffolkes said:
Uhh.. no offense to anyone, but if we have a rogue ROM that's bricking phones, we need to know in case it's floating around somewhere.
Also, (and again, not to start any negativity, just curious) the general feel of this thread was random bricking from flashing any ROM, which is very scary and cause for alarm. But according to the quoted post I'm gathering now that this is an issue directly related to accidents within a specific ROM?
Click to expand...
Click to collapse
i did flash the s3 rom and after that i lost everythng my phone i need to know how to restor the orgenal sd card cuz im looking with rootexplore it sdcard0
when i go to setting storge it only show 266mb used and 0.00 avilabel any body can help please
mackentosh said:
Well I was testing a rom for someone, I wont tell which rom but he said it was the "in call recorder" he added. He's got it fixed now but it did wipe everything. I managed to restore it back to stock with no root but it bricked after that. Now I see why carriers dont like to unlock bootloaders cause of people bricking their phone and taking them back
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Which ROM had the "In Call Recorder"? I've been looking for a replacement to that functionality after dropping HTC/ Qualcomm with the 2WCR patch on the kernel. ..
Sent from my SPH-L900 using xda app-developers app
You cant flash a s3 rom the partitions are different. Even the partitions forbthe international note 2. Tmo. Att. Verizon and sprint note 2 are different.
Try flashing the stock tar from sex tape or viper boy. This should fix those issues. Then update the phones prl. Profile. Software. And firmware. And see if u have 3g and everything else.
Then start over.
Sent from my SPH-L900 using Tapatalk 2
ffolkes said:
Uhh.. no offense to anyone, but if we have a rogue ROM that's bricking phones, we need to know in case it's floating around somewhere.
Also, (and again, not to start any negativity, just curious) the general feel of this thread was random bricking from flashing any ROM, which is very scary and cause for alarm. But according to the quoted post I'm gathering now that this is an issue directly related to accidents within a specific ROM?
Click to expand...
Click to collapse
it wasnt a rogue rom. it was two seperate private roms that were never released to the public
there is a very simple fix to this, i've fixed 2 phones this morning already with it. i'll post it up in a few
gotojanoo said:
but how did it happened ? can u please explain steps what u did that wiped yr imei?
Click to expand...
Click to collapse
it didnt actually wipe our imei. it repartitioned the phone.
t3project said:
it wasnt a rogue rom. it was two seperate private roms that were never released to the public
there is a very simple fix to this, i've fixed 2 phones this morning already with it. i'll post it up in a few
Click to expand...
Click to collapse
Good to know it wasn't released here publicly. Happy to hear you found a solution to the problem too.
dc13 said:
You cant flash a s3 rom the partitions are different. Even the partitions forbthe international note 2. Tmo. Att. Verizon and sprint note 2 are different.
Try flashing the stock tar from sex tape or viper boy. This should fix those issues. Then update the phones prl. Profile. Software. And firmware. And see if u have 3g and everything else.
Then start over.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Try this.
ffolkes said:
Uhh.. no offense to anyone, but if we have a rogue ROM that's bricking phones, we need to know in case it's floating around somewhere.
Also, (and again, not to start any negativity, just curious) the general feel of this thread was random bricking from flashing any ROM, which is very scary and cause for alarm. But according to the quoted post I'm gathering now that this is an issue directly related to accidents within a specific ROM?
Click to expand...
Click to collapse
I said I was testing a rom which means I was the only person he released it to at the time. I dont want to reveal the rom or the dev because I dont want any negativity towards him he's a great dev and your probably running his rom right now. So dont worry there isnt a rogue rom floating around
Sent from my SPH-L900 using xda premium
t3project said:
it wasnt a rogue rom. It was two seperate private roms that were never released to the public
there is a very simple fix to this, i've fixed 2 phones this morning already with it. I'll post it up in a few
Click to expand...
Click to collapse
whats the fix cuz im going thru this problem right now ...i cant get any service (radios)
EDIT: NVM I JUST FLASHED TO STOCK RECOVERY THEN FLASHED STOCK LJ1 THRU ODIN AND ALL IS WELL NOW
mccurt29 said:
whats the fix cuz im going thru this problem right now ...i cant get any service (radios)
EDIT: NVM I JUST FLASHED TO STOCK RECOVERY THEN FLASHED STOCK LJ1 THRU ODIN AND ALL IS WELL NOW
Click to expand...
Click to collapse
simple, wasnt it? lol..................
mackentosh said:
I said I was testing a rom which means I was the only person he released it to at the time. I dont want to reveal the rom or the dev because I dont want any negativity towards him he's a great dev and your probably running his rom right now. So dont worry there isnt a rogue rom floating around
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Was it mine? I can tell you that if any of the previous stuff happened to you, it wasn't from the ROM. Could have been a bad download, coinsidence, etc. The ROM flash wouldn't have caused it.
Sent from my SPH-L900 using Tapatalk 2
Rooted my AT&T Samsung Galaxy Note ii (SGH-I317)
Installed custom ROM and now get no service.
Upon checking Settings -> Mobile Network
It says: INSERT SIM card Insert SIM card to access network services
About Devices has all the correct information except:
Baseband version says: UNKNOWN
How do I fix this?
Did my SIM card somehow and need to get a new SIM and call AT&T to reactivate another SIM?
My guess is that I would need stock ROM image to fix this but cannot find it.
I did find Stock Rooted I317UCALJ2 (http://forum.xda-developers.com/showthread.php?t=1986556)
image but still no Service.
Any help would be appreciated as my phone is a BRICK now and useless.
thanks
i have the exact same problem and can't seem to find an answer...
restore stock rom and still nothing...
did you flash a ROM & Radio for the international Note II (N7100 or N7105)? check your phone for an IMEI number; if it's not there, then you'll have to fix that first. you aren't the first to have this problem and i've read other posts where users were able to correct the problem.
I like how no one responded for 2 months.
Worst case scenario flash stock and triangle away to 0 flash counter amd take it back. Lol. Say it stopped working.
Sent from my SGH-I317 using xda app-developers app
Your comment makes a lot of sense... I'm running root on stock and didn't have a problem. I've recently installed CMW thru Odin which I'm pretty sure I did right but then...I installed a kernel to be able to overclock... could the kernel have mess up my radio? I'm not able to pull up my imei... Can you point me to the right directions in order to restore my stock Rogers kernel?
Sent from my SGH-I317M using xda premium
---------- Post added at 01:59 AM ---------- Previous post was at 01:49 AM ----------
That is indeed my worst case scenario but I would really wish to avoid that as I really want to could fix this on my own... I know it's possible with the help of people like you guys, I'm new to android and I still went ahead and bought the premium version of this app to support this community
Sent from my SGH-I317M using xda premium
I have been here. Installed the CrashRom which was probably not meant for 1317s. Though I loved the ROM, my model number was displayed as 7100, IMEI was null and mobile network would display insert sim message.
If you watched the installation of the rom.. you would have noticed that at the end it rewrites your modem/radio files. Thankfully even after a wipe, the all important NV folder was there.
I was able to find the original AT&T rom at stockroms and also the original modem files for the 1317. I did a full wipe and installed this rom back..and thankfully the radio was back online. Didn't have to flash the modem. Now with a working phone, I wanna read well before I flash my rom again.
Hope this helps. Though I am a newbie.. If you need any further information.. feel free to send me a message.
iZack187 said:
Your comment makes a lot of sense... I'm running root on stock and didn't have a problem. I've recently installed CMW thru Odin which I'm pretty sure I did right but then...I installed a kernel to be able to overclock... could the kernel have mess up my radio? I'm not able to pull up my imei... Can you point me to the right directions in order to restore my stock Rogers kernel?
Sent from my SGH-I317M using xda premium
---------- Post added at 01:59 AM ---------- Previous post was at 01:49 AM ----------
That is indeed my worst case scenario but I would really wish to avoid that as I really want to could fix this on my own... I know it's possible with the help of people like you guys, I'm new to android and I still went ahead and bought the premium version of this app to support this community
Sent from my SGH-I317M using xda premium
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------
If you look in the development section in the All in One forum link, there is a link to the stock rogers ROM and radio.
I don't know if you have done this but it hasn't been mentioned in the post so I thought I would mention it.
I had the same happen to me. The radio just quit. I had a circle with a slash through it. I Odin flashed the stock tar and no luck in fact it got worse and I had to get phone replaced. I have a ton of flashing experience and this was a first for me. I think like someone mentioned above it was a mix match ROM with some pieces from the international version although it was posted as an AT&T ROM. I still have to send it back but after seeing that someone above fixed theirs I am sending a PM
Sent from my GT-I9300 using Xparent ICS Tapatalk 2
Yeah that's exactly what happened to me, lol, installed the CrashRom. But thanks to this failure of epic proportions, I've learnt so much and I've succeeded in restoring my Rogers modem files
Now I got my nandroid backup, and if I mess up again, I got my Rogers stock ROM, radios, and kernel with me at all times
Sent from my SGH-I317 using xda premium
I know from past experience using ODIN for the Droid Charge, we had to pull the SIM before flashing. People were getting their SIMs fried sometimes. The remedy was to remove until the flash was complete. Avoid touching the contacts though.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I wanted to bump this as I am having the same issue. I tried using Odin to reinstate the stock rom and radio and still nothing.
So this happened to me and after I unrooted and factory reset I had no luck, called Att and got a new one. But I don't know why it stopped reading my sim, it. Worked in my iPhone 5. Strange
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I flashed the Bell Root66 file to my Bell Note II and now I have NO Modem, NO IMEI Number and cant figure out how to get it back. I have flashed the Bell CSC after installing to try and remedy the issue with no luck. I have tried to return my phone to stock for 2 days now (the install counter shows 21 times!). I NEED HELP with this please guys!
I am in Toronto and am on Bell Mobility. After 2 days and 21 flashes I am no further ahead and could use some guidance please!
iZack187 said:
Yeah that's exactly what happened to me, lol, installed the CrashRom. But thanks to this failure of epic proportions, I've learnt so much and I've succeeded in restoring my Rogers modem files
Now I got my nandroid backup, and if I mess up again, I got my Rogers stock ROM, radios, and kernel with me at all times
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
cortez.i said:
did you flash a ROM & Radio for the international Note II (N7100 or N7105)? check your phone for an IMEI number; if it's not there, then you'll have to fix that first. you aren't the first to have this problem and i've read other posts where users were able to correct the problem.
Click to expand...
Click to collapse
can u give any links to these forums, yes i install n7100 rom on my i317 and yes i don't have a imei.
Well my friend ...I've got to tell you up front ...that the likelihood of getting your device repaired on your own is remote at best...
You have damaged the device partitions ...and likely do not have a usable backup of the EFS folder..
The EFS contains the IMEI number used for restoration purposes...
I'm not going to tell you that a repair cannot be done..as a select few users were able to fix a bricked device...but I will suggest your best solution ...IMHO
Contact the good folks at :
mobiletechvideos.com
And let them know what you did..
They offer a complete restoration service to repair your device correctly ...and can likely do the job in about a week...
They are located in Texas, USA I believe ...and they have an excellent reputation for quality service...
Your choice of course...but if I were in your situation...I'd send the device to them in a second...
Time is money...at least for me...and although I could probably fix it...I don't have a RIFF BOX...or a JTAG ...
Others will post up with links to help you...and after you have a chance to look them over ...you can decide..
Very sorry for the damaged phone....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
t989D problem
I have a similar problem. I installed Superandroid 4.3 on a telus/koodo s2 t989D. I had to update the radio to flash the rom. I used CWM for that.
Now the info I have on the phone is
model sgh t989
android version 4.3
baseband t989uvmc6 .
The phone is not reading my SIM at all. It shows my carrier but no signal strength at all. I have read the above post. My IMIE number is still there.
Any help
Hello guys, I need help. Last week i happened to install a custom rom on my t mobile s3 and after a while i decided to return its stock rom just to get a "no service" on the notification later after going on the settings there was no IMEI i have been trying to recover both but nothing seems to work. If anyone knows a way to gain back the signal and also the IMEI please help. Thanks
Try this one
http://forum.xda-developers.com/showthread.php?t=1804123
Same thing happened to mine, I tried to fix it, didn't work. So I just hard bricked it and switched it out for $5
Remember to backup your imei on the new phone
bikrame said:
Try this one
http://forum.xda-developers.com/showthread.php?t=1804123
Click to expand...
Click to collapse
I tried that and gained my imei back but yet no service.
Abhi97 said:
Same thing happened to mine, I tried to fix it, didn't work. So I just hard bricked it and switched it out for $5
Click to expand...
Click to collapse
how was it switched out? Please give me more info on this coz im so close from bricking it.
#PS i dont have a contract the phone is from the states
This is a more complete guide:
http://forum.xda-developers.com/showthread.php?t=1801997
Just make sure you follow all THREE steps.
Sent from my Galaxy Nexus using xda premium
Don_Perrignon said:
This is a more complete guide:
http://forum.xda-developers.com/showthread.php?t=1801997
Just make sure you follow all THREE steps.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
+1 I lost mine and data a few months ago and I was able to restore it along with the data as well. Just follow the guide and it should work :good:
Don_Perrignon said:
This is a more complete guide:
http://forum.xda-developers.com/showthread.php?t=1801997
Just make sure you follow all THREE steps.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks guys used the following steps and gained my signal back but it is stuck on EDGE and keeps disconnecting also on the ERI Version it says not available and also no serial number i uploaded a screenshot. what should i do???
You might want to get rid if that picture showing your IMEI to start with
Sent from my SGH-T999 using xda app-developers app
lost imei also
I dont Know if im wrong but when i flash custom rom from 4.2 the ones on the original dev. i travel from dallas to Puerto rico and yo know that in the plane you put the arpline mode when i turn it off i have the edge in my status bar and when i search for the imei it was 0 so me trying to fix my phone by some methods in xda i do it wrong and i get like a service screen in my phone and that screen was persistent so i go to tmobile fight a little bit anf the change my phone to a new one So in the new one i flashed one jb rom 4.1.1 and so far no problem with the imei.!
Don_Perrignon said:
This is a more complete guide:
http://forum.xda-developers.com/showthread.php?t=1801997
Just make sure you follow all THREE steps.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
daxecutioner24 said:
You might want to get rid if that picture showing your IMEI to start with
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks...hid it.:good:
!JORGE! said:
I dont Know if im wrong but when i flash custom rom from 4.2 the ones on the original dev. i travel from dallas to Puerto rico and yo know that in the plane you put the arpline mode when i turn it off i have the edge in my status bar and when i search for the imei it was 0 so me trying to fix my phone by some methods in xda i do it wrong and i get like a service screen in my phone and that screen was persistent so i go to tmobile fight a little bit anf the change my phone to a new one So in the new one i flashed one jb rom 4.1.1 and so far no problem with the imei.!
Click to expand...
Click to collapse
hey, atleast better you coz you were able to return it to T Mobile. I was given the phone by a friend from the States and i happen to be in Kenya so it is Impossible for me to return it.
Good ole cm ruining phones smh
Dano79 said:
Good ole cm ruining phones smh
Click to expand...
Click to collapse
After two days of working this issue I was able to repair my IMEI, however, I'm not stuck on 2g or "E" for AT&T.
I was able to use Model T989 to make the change as listed below. Please advise how to add 3g or 4g. Edge is extremely slow Thanks:
Selected model: T989
Selected port: COM10 USB Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: SGH-T999
Android version: 4.1.1
Product code: Not Active
Phone version: T999UVDLJA
PDA version: T999UVDLJA
CSC version: T999TMBDLJA
IMEI: Unknown
Checking Super user right... true
Writing data to phone... OK
Rebooting phone... OK
Now connect phone to UART cable
Checking phone at COM10 OK
Reading phone info...
Model: SGH-T999
Country code: TMB
Cal date: -
Factory SW: T999UVDLJA
Unique number: CMAF7B91BEA938F
Memory phone: -
Bypass MSL... OK
Repairing IMEI... OK
Repair done
Rebooting... OK
Done with Samsung Tool v.14.5
Please advise how to add 3g or 4g. Edge is extremely slow Thanks.
Days Later:
Problem resolved. You need QPST v2.7.378 and SGS3 QCN Generator (Peoplearmy). Although both I believe was created for the I535 (Verizon) it resolved my problem in which I'm able to get 3g/4g on my phone (T999) using the AT&T network after I repaired the IMEI.
Don_Perrignon said:
This is a more complete guide:
http://forum.xda-developers.com/showthread.php?t=1801997
Just make sure you follow all THREE steps.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Can you still see this thread? It says invalid thread specified for me.
I've been looking for this problem for almost a month and almost every xda thread link people post is dead.
Been stuck on Edge for almost a month, so finding these links that supposedly solve everything and then seeing they are not accesible to me is very frustrating. :/
Thanks in advance.
---------- Post added at 11:39 PM ---------- Previous post was at 11:25 PM ----------
dblac said:
Thanks guys used the following steps and gained my signal back but it is stuck on EDGE and keeps disconnecting also on the ERI Version it says not available and also no serial number i uploaded a screenshot. what should i do???
Click to expand...
Click to collapse
This is exactly my problem right now. No eri, still stck on edge after inserting imei.
The thread is still visible
Sent from my SGH-T999 using Tapatalk 2
I have the same problem....
I lost IMEI and lost my data.
I was able to recover my IMEI but I am still stuck on EDGE...
please help
Just_K said:
I have the same problem....
I lost IMEI and lost my data.
I was able to recover my IMEI but I am still stuck on EDGE...
please help
Click to expand...
Click to collapse
I can help but it'll be a little later. Look for a pm in a couple of hours if no one else jumps in first.
Sent from my SGH-T999 using xda premium
Same here
Im with videotron un québec,
I Was on CM10, lost data connection after an update
Reverted to stock (SGH-T999V_VTR_T999VVLALE6_T999VYVLALE6_Original)
Fixes imei
And now, still no service
When I go in Networks operators, available networks (witch takes a very long time to load compare to another phone) only shows "Rogers Wireless"
Anyone as an idea ? Please