bluetooth...is it possible? - EVO 4G Q&A, Help & Troubleshooting

is there an app, or a way to program, to have a wired headset plugged into my evo and have another device recognize it like a bluetooth headset?

Related

Splitting sound function - Bluetooth and USB headset

Hi all,
Have any of the Hermes Guru's out there worked out if Bluetooth and USB headsets can be used at the same time.
What I am trying to achieve is for the phone sound - ie incomming calls etc to be routed to the bluetooth pairing and for the other sounds, such as my gps, music and other sounds to continue to be routed via the mini USB port, either for headphones or lineout.
Is this possible? Would this be a registry setting? Is all sound handled in the same way, or is it possible to determine the phone sounds against all others.
Thanks in advance
Adam
does anyone have any ideas?
When in my car, I have the usb port plugged in to a 3.5 adapter and into my car stereo. I also have a BT headset turned on and on my ear. While listening to MP3s, if the phone rings, the mp3 player on the phone stops playing and it displayes the caller ID. If I push the button on the headset, I get the phone call on the BT. When I am done, the mp3 starts again through the usb.
thanks
Awesome yatrg, that was exactly what im trying to do. I can buy an aux input for my car and run it off the mini-usb to 3.5mm adaptor and can also get a parrot bluetooth to handle the phone call.
Cheers mate
Adam

paring a BT headset w/ other devices...

I've got a Jabra BT8010, and it works great with my Moto Q9c...haven't had a problem yet.
However, I've encountered a few anomalies pairing it with my PC and PS3.
I've got the BlueSoleil BT device on my computer, and as long as the headset does not have the computer in memory as a paired device, then it will connect fine, and all works well.
However, if the computer has already paired with the headset, then when it attempts to connect by "calling" the headset, the headset can't "answer" the call...so it keep vibrating and ringing until you stop trying to connect to it w/ the PC.
Connecting it w/ the PS3 yields a different issue...it will connect fine, even if it's been previously paired and connected, but it can never seem to keep the connection, and the "audio devices setup" within the PS3 shows no mic activity while connected, and usually causes the connection to drop.
I've read in quite a few places that people have had no problems with the BT8010 for pairing with a PC or a PS3
The only thing I can come up with is that either the BT8010 firmware version I have doesn't work with the PS3, or the new firmware in the 80GB PS3 doesn't work w/ the BT8010
this is very frustrating...
well I just figured this out....
DON'T HAVE ANYTHING PLUGGED INTO THE USB PORT.
I was charging a controller on the PS3, and as soon as I unplugged it, the headset worked fine, doesn't drop connection, and is being recognized as the audio input device, NICE.

a2dp and phone calls

Is there any sort of app that can redirect phone calls through a2dp. I can get a gadget that will allow me to contorol my media player and stream music over bt to an iphone dock but I also need to calls to come throuhg those speaker. A microphone isnt a problem as the phone has one that will work fine. What I need to do is have phone calls,if an a2dp device is present and connected use that instead of the phones speaker. Otherwise I have to go buy a BT radio for my car. (which comes with an ipod dock but no bt)
you might could just use an auxiliary input to get just the audio out. Pretty sure you can't use a2dp for phone calls.
Sent from my PC36100 using XDA App
If the BT device has the headset profile you should be able to receive calls on it, many BT enabled car stereos and BT headphones are able to carry A2DP, AVCR and the headset profile.
I want the same for my Blackberry A2DP gateway in car
I have a blacberry A2DP gateway in my car that connects ipads, htc phone and iphone to the stereo input of my car sound system. The sound quality is excellent for all uses but the incoming phone calls are routed via the phone internal speaker unless I plug a second stereo cable into the car input jack.
Can I get htc hd2 windows mobile 6.5 phone mono into this gateway device to avoid having to connect a stereo cable to my phone output? It connects to the HTC as stereo audio only.
fenixjn said:
If the BT device has the headset profile you should be able to receive calls on it, many BT enabled car stereos and BT headphones are able to carry A2DP, AVCR and the headset profile.
Click to expand...
Click to collapse
So in other words,the answer is no,there IS no such app. As I said,I can buy a gadget that will connect A2DP to a I-Pod interface. It does NOT have headset profile.

Bluetooth Connections

Hey there, I have a quick question about Bluetooth.
Here is the situation: I use a bt headset when driving every time. It's a godsend etc etc. But I also have an auxiliary port on my car's head-unit which I use to plug my phone into and stream music. I would like to minimize the amount of wires going around because sometimes I also have to plug in a usb power cable into the phone and then things get messy.
So here's my question: Can I have my bt headset paired and connected, and also get a Bluetooth audio receiver (like the official htc bt receiever: http://www.htc.com/www/accessories/htc-bluetooth-stereoclip/) and have it paired and connected at the same time. This way I can stream music but also receive calls to my headset.
Thanks
nope.jpg
Only if the car is compatible with streaming music via Bluetooth.
Well the head-unit does not have/support Bluetooth, this much is true. However it does have an Aux port like I said, and with the device I posted (that htc bt dongle) i can plug it into the aux port and stream that way. I know this will work but I don't know if I can also still use my bt headset for phone calls at the same time.
If it matters, the headset is a Jawbone Icon.
Thanks!
no one?
deli pastrami said:
Hey there, I have a quick question about Bluetooth.
Here is the situation: I use a bt headset when driving every time. It's a godsend etc etc. But I also have an auxiliary port on my car's head-unit which I use to plug my phone into and stream music. I would like to minimize the amount of wires going around because sometimes I also have to plug in a usb power cable into the phone and then things get messy.
So here's my question: Can I have my bt headset paired and connected, and also get a Bluetooth audio receiver (like the official htc bt receiever: http://www.htc.com/www/accessories/htc-bluetooth-stereoclip/) and have it paired and connected at the same time. This way I can stream music but also receive calls to my headset.
Thanks
Click to expand...
Click to collapse
Yes, you can. I use that exact setup in my Nissan Juke. You can have multiple pairings simultaneously. The music even stops when you get a call, then resumes after.

Dual Bluetooth

Odd question. I bought a vehicle that has Bluetooth but only does phone calls. I attached a Bluetooth aux device to the radio, which allows streaming music. I need to have both to allow the steering wheel bluetooth controls for voice on my phone to work and music streaming. My phone and car work great when both bluetooth devices are connected to my phone.
So now the odd question, is there any way to have the phone pair to both simultaneously? It seems once it finds my car, then it stops looking for other devices and I have to manually connect the 2nd Bluetooth device. Thanks a head of time!
cloud12077 said:
Odd question. I bought a vehicle that has Bluetooth but only does phone calls. I attached a Bluetooth aux device to the radio, which allows streaming music. I need to have both to allow the steering wheel bluetooth controls for voice on my phone to work and music streaming. My phone and car work great when both bluetooth devices are connected to my phone.
So now the odd question, is there any way to have the phone pair to both simultaneously? It seems once it finds my car, then it stops looking for other devices and I have to manually connect the 2nd Bluetooth device. Thanks a head of time!
Click to expand...
Click to collapse
mine does this just fine. i was on a road trip bluetoothing to my fm modulator and when calls came in, it muted the music and made the phone ring thru the stock phone connection hardware. are you having troubles getting this same situation going?
No, they pair just fine. I just have to manually connect the 2nd device through the phone. It won't automatically connect to both once it finds the car.

Categories

Resources