Just hooked up my new Galaxy Nexus on ST today. Talk, text and data work... except for the data sometimes
Data is slow and spotty despite good signal. When Google Play tries to access the network it fails almost every time. I've found other posts about this solution and tried these two APN settings with no luck:
(ST recommended)
APN Name: Straight Talk APN: att.mvno Proxy: proxy.mvno.tracfone.com Port: 80 MMSC: http://mmsc.cingular.com MMS Proxy: 66.209.11.33 MMS Port: 80
(Found on hofo)
Name: US - Straight Talk Web APN: att.mvno Proxy: Port: Username: Password: Server: MMSC: MMS Proxy: MMS Port: MMS Protocol: WAP 2.0 MCC: 310 MNC: 410 Authentication Type: PAP APN Type: default, supl
TXT Messaging MMS: Name: US - Straight Talk MMS APN: att.mvno Proxy: Port: Username: Password: Server: MMSC: http://mmsc.cingular.com MMS Proxy: 66.209.11.33 MMS Port: 80 MMS Protocol: WAP 2.0 MCC: 310 MNC: 410 Authentication Type: PAP APN Type: mms
Any ideas?
Sent from my PC36100 using Tapatalk 2
Do not Mess with APNs, the phone gets those from your carrier automaticly... Try flashing some other radios.. For me xxkk6 or any ug version wont work or barely works.. Only xxkl1 works great for me depends on your zone/carrier and several other factors.. So go ahead and find the basebands thread in the general section, download all the radios for gsm (Assuming you have a GSM phone) get the img files and flash them via fastboot and try until you get a Stable service
Sent from my Galaxy Nexus using xda premium
I appreciate the response. Straight Talk says you must and, from what I experienced, the APN was not set automatically and though I had voice and text data did not work at all until I did set it. That might be the case for phones that accept OTA programming but I don't think it's true for unlocked phones or when switching carriers. (I had to set the APN on my Evo after flashing it from Sprint to PagePlus because OTA programming doesn't work)
Thanks for the advice on the radio though. I'll try it
Sent from my PC36100 using Tapatalk 2
Related
Every rom I try i can't send an mms. Can someone post their exact full mms settings for tmob. UK? Just so I can check mine against them. I don't want to blame the roms.
Name: T-Mobile MMS
APN: general.t-mobile.uk
Proxy:
Port:
Username: t-mobile
Password: tm
Server:
MMSC: h t t p://mmsc.t-mobile.co.uk:8002
MMS proxy: 149.254.201.135
MMS port: 8080
MMS protocol: WAP 2.0
MCC: 234
MNC: 30
Authentification type:
APN type: MMS
Hope that helps
(remove spaces from h t t p)
Sent from my HTC Desire using XDA App
did this work for you? im having the same trouble on vodafone and also had this problem when i was with t mobile. still cant solve it even with all the settings.
can recieve and use the internet fine though.
Hi, I recently unlocked my Incredible 2 and I'm in India. It seems that the new SIM card allows me to make voice calls fine, but I can't seem to get 3G data even after signing up for the plan here etc. It shows Airtel (service provider) in the networks list and is active, but I still cannot get it to connect. Any ideas?
Have you confirmed your APN is entered correctly?
Some help for ya: http://forum.xda-developers.com/showthread.php?t=550673
Read below instructions for Airtel Mobile Office and Airtel MMS APN Settings:
1. Delete all APN
2. Create New APN with followint Settings
Name: Internet
APN: airtelgprs.com
Proxy:
Port:
Username:
Password
Server: *
MMSC: http://100.1.201.171:10021/mmsc
MMS Proxy: 100.001.201.172
MMS Port: 8799
MCC: 404
MNC: 92
APN Type: default
3. Save and then create one more APN with following Settings:
Name: mms
APN: airtelmms.com
Proxy: 100.001.201.172
Port:8799
Username:
Password
Server: *
MMSC: http://100.1.201.171:10021/mmsc
MMS Proxy: 100.001.201.172
MMS Port: 8799
MCC: 404
MNC: 92
APN Type: mms
Click to expand...
Click to collapse
Thank you guys very much. This got me on the net with Airtel!
NOTE: I posted this in the General Section as well, but I realized that may have been the incorrect place to post my question, hence I am posting it here. Mods, feel free to delete that post in the General Section.
First off, I have a Desire Z (Bell Version) that I have rooted with stable version of CM 7.03.
I have been problems sending MMSes for a while now. I've looked up the various settings listed all over the Internet, but nothing has worked. I've tinkered and I rebooted the phone everytime I changed the APN settings.
Here's what's on my phone currently (this is after doing much tinkering from the various settings I've found on the Internet):
Name: AT&T
APN: wap.cingular
Proxy: Not Set
Port: 80
Username: [email protected]
Password: CINGULAR1
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: 69.209.11.32
MMS Port: 8080
MCC: 310
MNC: 410
Authentication Type: PAP or CHAP
APN Type: default,supl,mms
Now after deleting this APN and resetting to default, this is what I have:
Name: ATT
APN: wap.cingular
Proxy: Not Set
Port: Not Set
Username: [email protected]
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: Not Set
APN Type: default,supl,mms
After going to the default settings, I still can't send MMSes and it's driving me nuts.
Also, I noticed there's version 7.1 out. However, as far as I know, MMS supposedly works fine on the version I have and I do remember being able to send MMS in the past occasionally, so I don't know what's going on...
Anybody have any ideas?
Flash the latest nightly after a wipe. You could also try a third party texting app.
Sent from my HTC Vision using XDA Premium App
I have searched here and google and tried about everything but I cannot find a solution. I have been having a problem with my at&t gs3 not picking up a signal, it will have bars sometimes with no data, then randomly drop all signal together. Sometimes I can get 4g after initially changing APNs, but it always drops out after a few seconds. I did get it to stay on edge for a little bit, but that also dropped out. This started right after I rooted the phone. I then installed Task's ROM, first the ICS then the JB version, to see if that would help, and it didn’t. I went through several APN settings to see if that was the problem, nothing gave a solution. So I tried returning to complete stock through Odin and that didn’t fix the problem either. I was getting full 4g before I rooted it, so know the problem was caused in the rooting process. I just want to know if there’s anything I can do to fix this, or should I just try and return the phone now that it is back to stock? Here are the APNs I tried, none of which fix my problem (the x in the hxxp are t):
Name: AT&T US HSDPA
APN: phone
Proxy: <not set>
Port: <not set>
Username: <not set>
Password:<not set>
Server:<not set>
MMSC: <not set>
MMS proxy: <not set>
MMS port: <not set>
MCC:310
MNC:410
Authentication type: <not set>
APN type: default
Name: AT&T PTA
APN: pta
Proxy: Not Set
Port: Not Set
User Name: Not Set
Password: Not Set
Server: Not Set
MMSC: hxxp://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MMC: 310
MNC: 410
Authentication Type: None
APN Type: default,mms,supl
APN protocol: IPv4
Enable/disable APN: APN enabled
Bearer: Unspecified
For 4G LTE PTA/HSPA+:
Name: PTA
APN: pta
MMSC: hxxp://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
For HSPA+:
Name: AT&T
APN: wap.cingular
Username:[email protected]
Password:CINGULAR1
MMSC: hxxp://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN type: default,supl,mms
This, can someone help with this?
Edit: the HSPDA one worked for me. It was the last one I tried...
AntiCommon said:
This, can someone help with this?
Funny, I'm having the same exact problem also. I came across this thread looking for a stock image to return my phone back to stock to see if that helps.
I'm on Task's latest build. I even reflashed the modem to see if that helped but no luck.
Have you found a solution to this?
Click to expand...
Click to collapse
Same here i cant hold a strong signal i can usually before i rooted 2-3 bars now i usually have 1-0 bars
Can someone forward the APN settings that you are using on your phone
jolson23 said:
Can someone forward the APN settings that you are using on your phone
Click to expand...
Click to collapse
Depends on your data plan on AT&T.
If you have the simple 3G smartphone plan, you can use the wap.cingular APN which is:
Code:
Name: Cingular 410
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mms.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Blank
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms
APN protocol: leave as is
Bearer: leave as is
If you have the Smartphone on 4G provisioned on your plan you can use the Phone APN which seems to be faster. My Nexus is provisioned for the later 4G plan and I combined my MMS with the Internet for one APN:
Code:
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
You'll need to check on your AT&T plan to see what data plan you have. If you don't have Smartphone on 4G you can't use the phone apn. You have to use the cingular.wap one. I'm getting about 5 mb/s down and 1.1 mb/s up using the phone apn.
Hope this helps and remember the Thanks button!
Todd
daystrom said:
Depends on your data plan on AT&T.
If you have the simple 3G smartphone plan, you can use the wap.cingular APN which is:
Code:
Name: Cingular 410
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mms.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Blank
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms
APN protocol: leave as is
Bearer: leave as is
If you have the Smartphone on 4G provisioned on your plan you can use the Phone APN which seems to be faster. My Nexus is provisioned for the later 4G plan and I combined my MMS with the Internet for one APN:
Code:
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
You'll need to check on your AT&T plan to see what data plan you have. If you don't have Smartphone on 4G you can't use the phone apn. You have to use the cingular.wap one. I'm getting about 5 mb/s down and 1.1 mb/s up using the phone apn.
Hope this helps and remember the Thanks button!
Todd
Click to expand...
Click to collapse
just throwing this out there these settings do work on the sgs3 and im very thankful of u
Awesome thanks for the APN ... better signal and faster speeds =]
-Google
At&t apn 12/31/12
jolson23 said:
Can someone forward the APN settings that you are using on your phone
Click to expand...
Click to collapse
I needed these not long ago myself.... Thought I would share... AT&T APN for 4G LTE using a motorola Atrix HD, data and mms... See attachment.
daystrom said:
Depends on your data plan on AT&T.............
Click to expand...
Click to collapse
Thanks for this. I searched the forums and whatever else thread that has the supposed APN info did not work. This though, works like a charm. :highfive:
Thanks! This APN for 4G worked on my T999 SG3 from T-Mobile that I just put on ATT. I managed to get 3.49 Mbps down from it. 4G icon. I guess this means my Iphone 5 LTE wont be used now lol.
It's not the APN, it's how the mms.apk was compiled. Download Go SMS Pro from the market, disable stock MMS app, go through the ADVANCE Settings in Go SMS. Find MMS Custom Agent & type "Android"
Done & Done.
I hope it works for you, too!
Verified on my Skyrocket with Orthus X 4.2.2 & Triumph with ROM? 4.1.2
jolson23 said:
Can someone forward the APN settings that you are using on your phone
Click to expand...
Click to collapse
i grandfathered the unlimited data plan on att but lately i can't use my data plan and i am not sure why...
i can use text and calls but no internet connection ... do you have any idea on how to fix it ?
I was Not getting mobile data on my LGOG after flashing CM 10.2, and added the second APN listed here. I just tested, and down speeds are 9.85mb/s down. I'm not getting the 4G logo though? What gives? I've got the H.