Related
I found a way to root and unlock nand without a pc or adb the process is so simple a noob can do it. it takes about 20 mins to complete and no headaches!!!
*HERES THE LINK FOR THE VIDEO TO SHOW YOU HOW*
http://www.youtube.com/watch?v=DzEot...033&feature=iv
ALL THE FILES YOU NEED CAN BE FOUND AT THE UNLOCKR.COM
*Go to unlockr.com
*Click how to
*Than select android
*Than EVO4G
*And then click the link for how to unlock nand DO NOT USE THERE METHOD JUST FILES!!!!
*Download the 4 files and follow the video above
GOOD LUCK COMMENT AND QUESTIONS OR HELP IN THE THREAD
video isnt working
Hello guys,
first of all a big thank you to anghelyi for explaining this to me very patiently and for uploading the files!!
Of course the credit also goes to Oleg_k, rebellos,mijoma,srg.mstr,nbates66,adfree, etc. (sorry if i haven't mentioned anyone)
As adfree said, it would be nice to have a tutorial on how to install the current state of the android on the wave , so DO THIS AT YOUR OWN RISK
It is better only for people who have experience in flashing and using multiloader..
Read this tutorial carefully and please read the entire thing! then you will have something like this
http://www.youtube.com/watch?v=YlW7g21PprQ&feature=player_embedded (credits for video - anghelyi)
THIS IS NOT THE STABLE WORKING VERSION, IT IS THE CURRENT STATE
PLEASE FOR HEAVEN'S SAKE, DONT DO THIS IF YOU DONT KNOW TO FLASH PROPERLY, YOU WILL I REPEAT YOU WILL BRICK YOUR PHONE
The procedure:
*Works on s8500XXJL2 firmware. So flash to that firmware first.
XXJL2 Firmware - http://www.multiupload.com/WMGXTWKQH2 (thanks vivekforbes for link)
if pass asked - samfirmware.com (it should be)
Stuff needed
Ubuntu (if you can find a alternate to format to ext2 you are welcome to use it)
Multiloader(google it)
Download Kernel and Filesystem : (you will get an zImage from this file, DELETE it)
http://www.megaupload.com/?d=CI0QUBLY
The new zImage: (credit - anghelyi)
dowload either from :
http://badadroid.googlecode.com/files/zImage.anghelyi
and rename the file to just zImage without the .anghelyi
If lazy to rename just download from here:
http://www.mediafire.com/?xl5aikl5e8r7hv4
Updated FOTA (boot without USB cable
http://badadroid.googlecode.com/files/kernel_boot.fota
Sbl.bin
http://badadroid.googlecode.com/files/sbl.bin
XXJEE bootloader
http://badadroid.googlecode.com/files/S8500XXJEE_BL.zip
Work Begins :
1) Extract the files after download
2) Create folder "galaxyboot" (without quotes) in Wave internal memory and put the sbl.bin and the zImage to this folder.
3)Ok, now get into ubuntu and do the following :
Make two partitons using gparted on ubuntu , one fat32 and other ext2
You have to copy those files while being a root user in ubuntu. For this :
Open a terminal
Type "sudo su" without quotes in terminal
Enter new password
Then click the power button on top right
Login with username as root and password as the pass u entered
Open terminal
Type "sudo file-roller" it will open the archive manager.
Use archive manager to extract files from badadroid.tgz -> filesystem.tgz -> You need to extract 5 folders(system,lfs,dbdata,data,cache..select these 5) to ext2 drive directly.
Copy the new zimage and sbl.bin to galaxyboot folder(create it if it doesnt exist) in wave internal memory
In terminal type "sudo nautilus"
A window will open
Go to ext2 partition system/media/audio and rename "ui" folder to "uibackup"
Open Terminal
Now in terminal type "sudo sync"
Unmount the partitions before unplugging the phone (this step helped milli133 )
RISK RISK RISK RISK
4) Replace the bootloader to XXJEE one
5) Replace the FOTA with the one you have downloaded
TIP - to those who dont know the above two steps : (thanks vivekforbes)
=> Open multiloader and select LSI and select FULL DOWNLOAD
=> Select boot(use xxjee boot files) and FOTA ( precompiled one in above download)
=> click download to flash..
RISK OVER
6) Switch phone on normally to see if Bada is loading
7) Turn off phone, Press and hold call button + power button
8) Thats it! Android is on your phone
Oh disable swype in the settings menu else your keyboard wont work!
DONT DELETE ANY APK FILES, ANDROID WILL WORK FINE WITHOUT DELETING THEM
Enjoy
please dont complain if you brick your phone, i cant test it since i have s8530
umm
how do i delete this thread
cfernr says people may brick their phones because of this
Thank you.
I will try in next 2 days. Then I'll post my results... or my new Questions.
Best Regards
cfernr says people may brick their phones because of this
Click to expand...
Click to collapse
Please let this Thread alive.
HIGH RISK to brick handset
But you can choose self if it is worth to try.
Thanx in advance.
Best Regards
kadavil said:
RISK RISK RISK RISK
4) Replace the bootloader to XXJEE one
5) Replace the FOTA with the one you have downloaded
RISK OVER
Click to expand...
Click to collapse
one little question to these 2 steps:
is there a special method to replace them or do i just flash those 2 only with multiloader?
~MaX~ said:
one little question to these 2 steps:
is there a special method to replace them or do i just flash those 2 only with multiloader?
Click to expand...
Click to collapse
multiloader unless there is some other way to do it
kadavil said:
multiloader unless there is some other way to do it
Click to expand...
Click to collapse
thanks! so its just that easy as adding these 2 files to multiloader and flash them?
any special configuration options for multiloader?
~MaX~ said:
thanks! so its just that easy as adding these 2 files to multiloader and flash them?
any special configuration options for multiloader?
Click to expand...
Click to collapse
lol i dont know
let some PRO answer that
EDIT:
Yes it is through multiloader
thanks vivekforbes
kadavil said:
lol i dont know
let some PRO answer that
Click to expand...
Click to collapse
okay
better a litt,le time to wait than to brick the phone
Why in hell would you even want to get an unstable version of Android on your Wave?
Seriously, this thread should be deleted. Is it just so people can say, "look at me, I have Android on my Wave"??
Just wait until the guys have a stable and working version, instead of harassing them all the time in the other thread.
You will just stuff your phone up and brick it. It's not worth it.
kadavil said:
umm
how do i delete this thread
cfernr says people may brick their phones because of this
Click to expand...
Click to collapse
You can't delete a thread. Only mods can. But even though there's a risk of bricking your phone, people have a choice to do this and this could grow into a wonderful development. So this thread should continue and see what other developers can put into this to make it a stable build.
Altough people can blow up their houses, there exists detailed instructions how to make highly explosive materials.
You've made good howto with alot of warnings, I don't think you can and should feel responsible for any bricked handset.
I have requested this Thread.
Thank you very much kadavil.
To others. Please be sure you know what this means:
Bada Software and Hacking General
Technical discussion of Bada development and hacking. No noobs please.
Click to expand...
Click to collapse
Nobody is forced to try it.
Please stop "sabotage" and censorship.
I am old enough to know what I do.
All at your own risk.
Best Regards
kadavil said:
3) Then create a second partition (it must be the second partition!) with ext2 filesystem on your SD card and extract the filesystem here. (http://www.ehow.com/how_7492668_create-ext2-partition-windows.html)
Click to expand...
Click to collapse
Second partition?you mean logical partition?
Does anybody have the XXJEE bootloader? It's not in the XXJEE firmware on samfirmware.
tom112112 said:
Does anybody have the XXJEE bootloader? It's not in the XXJEE firmware on samfirmware.
Click to expand...
Click to collapse
http://code.google.com/p/badadroid/downloads/detail?name=S8500XXJEE_BL.zip&can=2&q=
How back to pure bada ? ( delete files from sd and flash via multiloader to bada ? )
pawlakpl said:
How back to pure bada ? ( delete files from sd and flash via multiloader to bada ? )
Click to expand...
Click to collapse
Just turn off the phone and turn it on holding the off button....
Just a little question, What's working and what's not working ?
PS: Sorry for my English
what is this step ?
Connect Wave to PC
edit : need i a special program installed on my PC or any speciall cable?
MICROMAX A65 ROOTED!!
[Sorry Guys!!!!]
As my father always says creating something is much less difficult that maintaining it,well this happened once again for me!!!.
I found maintaining this thread difficult I am officially announcing that you may stop expecting updates on this thread.Hats off to sssomnath474 to giving a new life to it!!!And it looks more informative as well!!
To add salt to injury A65 which my wife was holding is having issues with front speaker.Even after its trip back from the service centre gurus,it again managed to holdon the issue.I have given up on the micromax guys as of now.
GUYS,PLEASE FOLLOW THE BELOW THREAD BY sssomnath474 HENCEFORTH
http://forum.xda-developers.com/showthread.php?t=2501464
Recent activities as on 07 Aug 2013
--------------------------------------------------------------------------------------
1.Unlocked boot image and rooted it.
2.Install CWM.
3.Flashed firmware
4.sssomnath474 installed xloud,beats,bravia and confirmed it is working.
5.sssomnath474 also made few modification with UOT and came up with update.zip.
6.Right now we have unlocked V4 boot img which according to sssomnath474 has battery life updation.
7.I am studing as much time i can extract for an OC kernel and sssomnath474 is working on a rom.
8.As update by sssomnath474 this boot.img can have a better battery backup
http://www.mediafire.com/download/opweg2nwd0hk5dw/new_boot.img
let me know if you guys have access issues with any of the links or any of the link appears to be dead
9.Added a user guide how to flash the firmware.Hope it helps
http://www.mediafire.com/download/h2q51j8ovn1m1pc/Flash_firmware_config.pptx
10.you can use windows 7(you have to boot it in test mode and run the research downloader in administrator)
Thanks to sssomnath474 for the info
11.you can use unlock root as confirmed by sssomnath474
Thanks to sssomnath474 for this info
12.LIST OF STOCK IMAGES/PAC FILES FOR ALL MICROMAX MODELS
http://www.moulnisky.com/index.php?dir=Micromax
Thanks to sssomnath474 for this info
13.Heard from sssomnath474 that somebody has bumped imei while flashing.If any of you is stuck with the same issue i would suggest a complete firware flash following this tutorial,ONLY difference in this case will be DONT use my modified boot.img just flash the pac file as it is.
14.WoW! guys never thought this thread will get mushroomed like this....thanks to sssomnath474 ,shubhamym21 ,J.E.abhishek kumar and others for keeping things rolling
15.Some of you are facing weird problems with sims as my quick scan through the posts suggested,any updates on this guys?
I made changes to OP what sssomnath474 suggested, i am saying again all you need to do in the research downloader is select the pac file,uncheck calibration.
16.pradipkunwar51 has reported issue with docomo sim after flashing,i believe shubhamym21 already found a solution to it.Will Update the OP as soon as he comes back with comments
17.Critical Update:Tutorial & Tool if you messed up your EMI
Tutorial can be found here : China spd adnroid phone imei change just one click
& here is the download link : Android SPD IMEI Writing Tool_R1.5.3001 - Download - 4shared - maroof azam
Thanks to shubhamym21 for sharing the link and tutorial
18.Moved all updates under this activity section for better clarity
19.Adding Bravia engine zip
http://forum.xda-developers.com/showpost.php?p=44487763&postcount=138
Thanks to sssomnath474 for the link
--------------------------------------------------------------------------------------
Finally rooted my Micromax A65.Follow the guide carefully to avoid mistakes.I am not responsible for any physical/logical damage to you and your device .
Thanks to authors and their posts
http://forum.xda-developers.com/showthread.php?t=2165554 ElectronikHeart(Guru of spreadtrum)
http://forum.xda-developers.com/showthread.php?p=42693514#post42693514 Yekdall (confirming me unlocking the boot.img is key)
http://forum.xda-developers.com/showthread.php?p=42776196#post42776196 Intex12345(calibartion tabs needs to be unckecked in RD)
http://whiteboard.ping.se/Android/Rooting (for unlocking the boot.img)
Foreground
A Chaina re-branned phone
A fastboot mode
A useless recovery mode
A locked boot.img (thats why even chmod or simply pushing a su will not root the phone)
A IMEI number(which if you mess up after flashing,you will not get any radio signals)
1)First Unlock the Boot IMG
Before you proceed I will strongly recommend to download the tutorial guide ppt that you will find in Recent Activity list at the top of this post
You need to tamper permission after extracting the boot.img for this.No worry guys i have already done that for you .Just download the below file
Unsecured Boot Image
Now a bit critical part,read carefully .This unlocked image needed to be flashed to your device.For that you need research download and firmware pac file.
Download this to files from the below links
PAC versions & Tools Download
(pac file,driver,research download all included)
Download this drivers and install,after successfull installtion you will have(under device manager)
1.ABD interface
2.two COM ports
3.two emulators
If any of this having yellow sign it will not work.
Open research download
click on first button and load pac file
click on second button change baudrate to 115200,in calibration tab uncheck all.
For BOOT_IMG option browse and select the unlockedboot.img that you downloaded now.
plugin the usb cable(DON'T plugin the phone now)
click on play button
PRESS & HOLD VOLUME UP KEY and insert the usb cable,don't release the key.
Download should starts within 3 secs.If it doesn't then check the drivers carefully or reply to this thread with failures.
Once done unplug your phone and remove battery for 3 second
Reinsert battery and restart your phone.
YES!! you have successfully unlocked the boot.img
2)WiseMen Backup!!
First thing you should do before any tweaking and twisting save your back!!.Install CMW using the below method straight away and save your back.
1.Download .andriod.zip,extract it and save it under C:\Users\<computer name>\<paste it here>
http://www.mediafire.com/download/ga5tk2h89m41ddk/.android.zip
2.From your phone got to application-->developer option-->enable usb debugging
3.Now plugin your phone through micro usb cable.
4.Download this zip ,extract and place in under c:/<paste it here>
http://www.mediafire.com/download/s2as5grqceqtqq3/Android_Multi_tool.zip
5.Open a command prompt type
Code:
cd C:\Android Multi tool
C:\Android Multi tool>fastboot devices
20080823 fastboot
Note:you will NOT be able to proceed further if this doesnt shows up.Double check the andriod.zip has adb_usb.ini file.
Now we will flash a custom recovery image in fastboot mode.
Code:
C:\Android Multi tool>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 10.487s]
writing 'recovery'...
OKAY [ 3.425s]
finished. total time: 13.918s
7.Reboot your phone.
8.Now got to CMW using Volume up + power button and do a backup.
3)Push superuser zip & ROOT!!!
This the easiest step among all of them.Download the below file,put it under sdcard and flash it through CMW.
http://www.mediafire.com/download/t55b6ebzvx9yf1f/update.zip
THAT'S IT you are rooted!!!
REMEMBER,PROBABILITY OF BRICKING IS MINIMUM AS I HAVE ALREADY DONE ALL THE TEST FOR YOU GUYS !!!.STILL IF ANYTHING GOES WRONG DONT PANIC,JUST FLASH A FIRMWARE AS MENTIONED ABOVE(point 1) EVENIF YOUR PHONE IS
TOTALLY DEAD .
----------------------------------------------------------------------------------------------
Please hit thanks if i you find this useful
No body tested it yet ?
question
sayannayas said:
No body tested it yet ?
Click to expand...
Click to collapse
what if i flash it with fastboot
---------- Post added at 01:07 PM ---------- Previous post was at 12:48 PM ----------
beacuse i just flashed it with fastboot and its not booting
waiting for 10 mints
recovery.img error
sayannayas said:
MICROMAX A65 ROOTED!!
Finally rooted my Micromax A65.Follow the guide carefully to avoid mistakes.I am not responsible for any physcial/logical damage to you and your device .
Thanks to authors and their posts
http://forum.xda-developers.com/showthread.php?t=2165554 ElectronikHeart(Guru of spreadtrum)
http://forum.xda-developers.com/showthread.php?p=42693514#post42693514 Yekdall (confirming me unlocking the boot.img is key)
http://forum.xda-developers.com/showthread.php?p=42776196#post42776196 Intex12345(calibartion tabs needs to be unckecked in RD)
http://whiteboard.ping.se/Android/Rooting (for unlocking the boot.img)
Foreground
A Chaina rebranned phone
A fastboot mode
A useless recovery mode
A locked boot.img (thats why even chmod or simply pushing a su will not root the phone)
A IMEI number(which if you mess up after flashing,you will not get any radio signals)
1)))First Unlock the Boot IMG
You need to tamper permssion after extracting the boot.img for this.No worry guys i have already done that for you .Just download the below file
http://www.mediafire.com/download/1c6r9cu9iwc3769/boot.zip
Now a bit critical part,read carefully .This unlocked image needed to be NAND flashed to your device.For that you need research download and firmware pac file.
Download this to files from the below links
http://forum.gsmhosting.com/vbb/f811/guide-all-micromax-root-clockworkrecovery-1627895/
(pac file,driver,research download all included)
<IT WILL ONLY WORK IN 32 BIT WINDOWS XP,VM ALSO FINE>
Download this drivers and install,after successfull installtion you will have(under device manager)
1.ABD inteface
2.two COM ports
3.two emulators
If any of this having yellow sign it will not work.
Open research download
click on first button and load pac file
click on second button change baudrate to 115200,in calibaration tab uncheck all.
For BOOT_IMG option browse and select the unlockedboot.img that you downloaded now.
plugin the usb cable(DONT plugin the phone now)
click on play button
PRESS & HOLD VOLUME UP KEY and insert the usb cable,dont release the key.
Download should starts within 3 secs.If it doesnt then check the drivers carefully or reply to this thread with failuers.
Once done unplugg your phone and remove battery for 3 second
Reinsert battery and restart your phone.
YES!! you have sucessfully unlocked the boot.img
2)))WiseMen Backup!!
First thing you should do before any tweaking and twisting save your back!!.Install CMW using the below method straight away and save your back.
1.Download .andriod.zip,extract it and save it under C:\Users\<computer name>\<paste it here>
http://www.mediafire.com/download/ga5tk2h89m41ddk/.android.zip
2.From your phone got to application-->developer option-->enable usb debugging
3.Now plugin your phone through micro usb cable.
4.Download this zip ,extract and place in under c:/<paste it here>
http://www.mediafire.com/download/s2as5grqceqtqq3/Android_Multi_tool.zip
5.Open a command prompt type
Code:
cd C:\Android Multi tool
C:\Android Multi tool>fastboot devices
20080823 fastboot
Note:you will NOT be able to proceed further if this doesnt shows up.Double check the andriod.zip has adb_usb.ini file.
Now we will flash a custom recovery image in fastboot mode.REMEMBER,PROBABILITY OF BRICKING IS MINIMUM AS I HAVE ALREADY DONE ALL THE TEST FOR YOU GUYS !!!.STILL IF ANYTHING GOES WRONG DONT PANIC,JUST FLASH A FIRMWARE AS MENTIONED ABOVE(point 1) EVENIF YOUR PHONE IS TOTALLY DEAD .
Code:
C:\Android Multi tool>fastboot flash recovery recovery.img
sending 'recovery' (10240 KB)...
OKAY [ 10.487s]
writing 'recovery'...
OKAY [ 3.425s]
finished. total time: 13.918s
7.Reboot your phone.
8.Now got to CMW using Volume up + power button and do a backup.
3))Push superuser zip & ROOT!!!
This the easiest step among all of them.Download the below file,put it under sdcard and flash it through CMW.
http://www.mediafire.com/download/t55b6ebzvx9yf1f/update.zip
THATS IT you are rooted!!!
REMEMBER,PROBABILITY OF BRICKING IS MINIMUM AS I HAVE ALREADY DONE ALL THE TEST FOR YOU GUYS !!!.STILL IF ANYTHING GOES WRONG DONT PANIC,JUST FLASH A FIRMWARE AS MENTIONED ABOVE(point 1) EVENIF YOUR PHONE IS
TOTALLY DEAD .
Please hit thanks if i you find this useful.:good:
Click to expand...
Click to collapse
finally i rooted my cellphone thank u guys n thank u xda
sssomnath474 said:
what if i flash it with fastboot
---------- Post added at 01:07 PM ---------- Previous post was at 12:48 PM ----------
beacuse i just flashed it with fastboot and its not booting
waiting for 10 mints
Click to expand...
Click to collapse
You should not flash anything before you have unlocked the boot.img.It comes with a locked boot so flashing through fastboot may not work.
First thing that you should do now is stage up a windows xp with the drivers that i have linked here.connect your phone with research download and do a firmware flash.This will recovery your phone to its orginal state.Then follow my steps from the start(pls dont skip)
navi_5886 said:
i have done the same but when i go to recovery option it says cannot mount e:
Click to expand...
Click to collapse
you should have micro sd card,and it should be in fat32 formatted.Better if you backup your data in sdcard,format it with fat32 and then place only the update.zip
sayannayas said:
You should not flash anything before you have unlocked the boot.img.It comes with a locked boot so flashing through fastboot may not work.
First thing that you should do now is stage up a windows xp with the drivers that i have linked here.connect your phone with research download and do a firmware flash.This will recovery your phone to its orginal state.Then follow my steps from the start(pls dont skip)
Click to expand...
Click to collapse
ok downloading windows xp..good thing is i'm not scared
well do u have facebook id?
sssomnath474 said:
ok downloading windows xp..good thing is i'm not scared
well do u have facebook id?
Click to expand...
Click to collapse
Dont get me wrong but i think it is better to log your errors here as it might help others as well as me to correct the OP.
Once you have the setup use exact set of drivers and pac file that i linked in this thread.remember if you have a successful driver installation then you will have at least(under device manager)
2 new COM ports
2 emulators
I am working on capturing few snapshots or a demonstration guide,it will take time as i recently lost my bag-pack,will update with videos once i stage up.
sayannayas said:
Dont get me wrong but i think it is better to log your errors here as it might help others as well as me to correct the OP.
Once you have the setup use exact set of drivers and pac file that i linked in this thread.remember if you have a successful driver installation then you will have at least(under device manager)
2 new COM ports
2 emulators
I am working on capturing few snapshots or a demonstration guide,it will take time as i recently lost my bag-pack,will update with videos once i stage up.
Click to expand...
Click to collapse
thankx bro..it will help more if you give screenshots
sayannayas said:
Dont get me wrong but i think it is better to log your errors here as it might help others as well as me to correct the OP.
Once you have the setup use exact set of drivers and pac file that i linked in this thread.remember if you have a successful driver installation then you will have at least(under device manager)
2 new COM ports
2 emulators
I am working on capturing few snapshots or a demonstration guide,it will take time as i recently lost my bag-pack,will update with videos once i stage up.
Click to expand...
Click to collapse
need a help do i only check boot_img or i check all files?
sssomnath474 said:
need a help do i only check boot_img or i check all files?
Click to expand...
Click to collapse
check all files in main page,but for boot_img browse a select the unlocked boot.img that i have linked in this thread.The idea is to flash the unlocked boot.img instead of stock boot.img. Uncheck all in calibration page.Keep baudrate 115200
Also download the ppt that i just added.It may help you. Don't give up,setting the drivers will take trails & errors but i guarantee you the success
sssomnath474 said:
need a help do i only check boot_img or i check all files?
Click to expand...
Click to collapse
sucsessfully flashed with origianal system file..and one thing more it worked in windows 7 64 bit too
sssomnath474 said:
sucsessfully flashed with origianal system file..and one thing more it worked in windows 7 64 bit too
Click to expand...
Click to collapse
Great news buddy.If you have used my unlocked boot.img while flashing then rest of the steps will be a breeze to you.Install CWM and take a full back up.Then flash the update.zip,thats it.
sayannayas said:
Great news buddy.If you have used my unlocked boot.img while flashing then rest of the steps will be a breeze to you.Install CWM and take a full back up.Then flash the update.zip,thats it.
Click to expand...
Click to collapse
well thankx for boot image and help device is rooted
but this can be done in other way to
1.you can use windows 7(u have to boot it in testmood and run the research downloader in adminstor)
2.just use unlock root
thats it
thankx man.pls give ur facebook id
sssomnath474 said:
well thankx for boot image and help device is rooted
but this can be done in other way to
1.you can use windows 7(u have to boot it in testmood and run the research downloader in adminstor)
2.just use unlock root
thats it
thankx man.pls give ur facebook id
Click to expand...
Click to collapse
Mentioned your updates in OP.Hope you dont mind
sayannayas said:
Mentioned your updates in OP.Hope you dont mind
Click to expand...
Click to collapse
ok ok
well making some customizing themes in UOT cooked kitchen.hope it will work
sssomnath474 said:
ok ok
well making some customizing themes in UOT cooked kitchen.hope it will work
Click to expand...
Click to collapse
Wow! that will be really nice...hope you will share those with us
sayannayas said:
Wow! that will be really nice...hope you will share those with us
Click to expand...
Click to collapse
check it out
need pac file...!!!!
sssomnath474 said:
thankx bro..it will help more if you give screenshots
Click to expand...
Click to collapse
can anyone upload only pac file for mmx a65 !!!!! please......!!!!""
sssomnath474 said:
check it out
Click to expand...
Click to collapse
WOW looking nice...waiting for the release
Also if you are maintaining your own a65 thread for customs roms,suggest you to cross link with mine(vice versa) and keep track for both the threads
Hi, since somebody requested my newroot tool. here is it, enjoy! Tool will root your phone and install cwm recovery, busybox, su, superuser, allso you can unroot at least
Disclaimer:
- Do in mind rooting will modify your android, so you modifyind your android on your own risk, I am not responsible if tool is not working on your device or if tool make your android malfunction, you doing everything on your own risk!
Pre-requirements:
- You must have installed usb drivers! Just simple install Sony PC Companion, if your windows device manager detect unknown device than probably you must point drivers installation to search for propertly driver C:\Program Files\Sony\Sony PC Companion\Drivers directory. When your windows device manager detect your phone propertly than you are ready for rooting/unrooting
How to install (Windows users):
1: Download and extract newroot.rar
2: Enable USB Debugging
-You can do this by going into Settings>About Phone and tapping the Build Number multiple times to activate Developer Options
-Then Settings>Developer Options and check USB Debugging
3: Plug in your phone your PC
4: Run the root software [Pay close attention to your phone]
5: A pop-up will come up on your phone. Allow it
6: Let it do its thing
7: It will reboot and you're rooted
8: Enjoy
How to install (Linux users):
0. First of all you need adb for Linux, I not gona explain where you can download adb for Linux since you need to search XDA and found them byself, everybody know about adb and I not going to explain adb basic things, you need to help byself on that since adb you will need in future for sure
1: Download newroot and put to the same folder with adb binary
2: Enable USB Debugging
-You can do this by going into Settings>About Phone and tapping the Build Number multiple times to activate Developer Options
-Then Settings>Developer Options and check USB Debugging
3: Plug in your phone your PC
4: Run the root software [Pay close attention to your phone] a pop-up will come up on your phone. Allow it! Commands for runing root software is:
Code:
adb push newroot /data/local/tmp/
adb shell chmod 755 /data/local/tmp/newroot
adb shell /data/local/tmp/newroot doit
Allso there is a option for unrooting:
Code:
adb shell /data/local/tmp/newroot unroot
6: Let it do its thing
7: It will reboot and you're rooted
8: Enjoy
Newroot work with all kitkat firmwares but doesn't work with latest kitkat *after 108) .133, .157... firmware or with old JB firmwares!!!
If your running later kernels from out of 108 and newer firmware that you can achieve root following these steps:
1. download the .108 firmware or kernel only
2. flash only the .108 kernel using flashtool
3. Use newroot
4. Reflash back your newer kernel using flashtool
Download (for Windows):
- https://mega.co.nz/#!tFxmUArC!xRCF25Olnq1g228z0jrweytZDHk6M2A7-_RMIN7Dsaw
Download (for Linux):
- http://d-h.st/tBB
Credits:
- geohot libexploit library
Wow... Master munjeni was here.. Awesome...
~Download~
Sent from my C6903 using XDA Premium 4 mobile app
munjeni said:
Hi, since somebody requested my newroot tool. here is it, enjoy! Tool will root your phone and install cwm recovery, busybox, su, superuser, allso you can unroot at least
Download:
- https://mega.co.nz/#!odBXkSgY!D0d8heDxgqpdALBh3tliHrwO8LuUyjlaX-7unCUgG_U
Credits:
- geohot libexploit library
Click to expand...
Click to collapse
upload devhost link plz!
Great Tool !
Uploading on Box, if op allows it
Is Windows or Linux, Mac or directly used on Android?
Sent by my Z1 with XDA Fax
Duvel999 said:
Is Windows or Linux, Mac or directly used on Android?
Sent by my Z1 with XDA Fax
Click to expand...
Click to collapse
Itz a .EXE file for Windows
Great work from Great Dev.
Sent from my Xperia Z1 using Tapatalk
Thanks to the OP for this, looks like a great solution.
Is there any particular firmware you have to be running for this to work? Or do you need to downgrade?
Cheers
Kurt
munjeni said:
Hi, since somebody requested my newroot tool. here is it, enjoy! Tool will root your phone and install cwm recovery, busybox, su, superuser, allso you can unroot at least
Download:
- https://mega.co.nz/#!odBXkSgY!D0d8heDxgqpdALBh3tliHrwO8LuUyjlaX-7unCUgG_U
Credits:
- geohot libexploit library
Click to expand...
Click to collapse
Thanks a lot! It works!
Nobody mention models or what kind of rom does this program root why? is very funny no real data, any one with solid comments about models and rom versions?
Sorry if I'm rude but I think we need some info like what firmware version works with this root or any prerequisite should we have before rooting like bootloader being unlocked etc. Also a simple tutorial would be nice for newbies to avoid confusion. Ill test this out on the latest firmware [.108] on an unlocked bootloader and I will report if this is working.
Its booth for locked on unlocked bootloaders but for no already rooted devices (except rooted by our tool), its tested on last 3 android versions. There is 2 things, it can work or not work, you can try in jellybean and let me know (probaly not working). No more words here since tool is very easy and anybody know what to do with them Enjoy if you found them usefull and easy! Anybody can post detail installation here if allready used my aplication, I am lazy sory!
So I just tested it out and it works. So I figured out, why not just make a tutorial video since it's so simple. Here it is http://www.youtube.com/watch?v=06S9GUL9U5s
I enabled USB Debugging and Unknown Sources just to be sure.
No need unknown source since usb debuging is enought! Is not easy? I think very easy Did you tried my recovery after rooting, I just want to know how its working on z1, (you need to press volume button after blue led blink to enter into recovery)
It's really easy to root now. Just 1 click. CWM works too. Here's more proof that it works. Good work man
munjeni said:
Anybody can post detail installation here if allready used my aplication, I am lazy sory!
Click to expand...
Click to collapse
Here's the instructions:
1: Download and extract newroot.rar
2: Enable USB Debugging
-You can do this by going into Settings>About Phone and tapping the Build Number multiple times to activate Developer Options
-Then Settings>Developer Options and check USB Debugging
3: Plug in your phone your PC
4: Run the root software [Pay close attention to your phone]
5: A pop-up will come up on your phone. Allow it
6: Let it do its thing
7: It will reboot and you're rooted
8: Enjoy
Also show them my video
I have tear in my eye hehe welcome back and as always very good work!
Great work as usual
munjeni said:
No need unknown source since usb debuging is enought! Is not easy? I think very easy Did you tried my recovery after rooting, I just want to know how its working on z1, (you need to press volume button after blue led blink to enter into recovery)
Click to expand...
Click to collapse
Anyone uploading dev host link Plz...
Sent from my C2305 using XDA Premium 4 mobile app
kaushal7007 said:
Anyone uploading dev host link Plz...
Sent from my C2305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
why you need dev host? mega is not really good but it's ok with small file like this
This is a guide on how to unlock the bootloader, install TWRP, and root your Huawei Nova 3i/P Smart+. (INE-LX1/INE-LX2). You need at least $20 to unlock the bootloader.
Thanks for @medoamer for trying this first and helping me out!
Code:
#include <std_disclaimer.h>
/*
* Your warranty will be void if you follow this guide.
*
* Only YOU are responsible for any damage done to your
* device by following this guide. I'm not affiliated with, or
* responsible for any service mentioned below.
*
*/
You will need:
-A working Nova 3i/P Smart+.
-$20/$22/$55 depending on your preferences.
-A Windows PC. (PM me if you have a Linux one, I will update the guide accordingly)
-A working SD card that is tested and working with your phone.
-A reliable USB cable which works for connecting your phone to your PC.
-A backup (optional)
PART 1: Bootloader Unlock
To unlock your bootloader you need a bootloader unlock code. Huawei stopped giving bootloader codes in end of July. But you can buy one in one of the webistes below. You have to send your IMEI to them, and they will generate the unlock code and send it to you. You can see your IMEI at System>>About Phone>>IMEI.
1.) Global Unlocking Solutions for $20/$22
First of all, I know that the website looks super sketchy. But @medoamer, myself, and a lot of other XDA users had success with this method. I spent the extra $2 for the fast service, but it is up to you.
2.) FunkyHuawei for $55
The advantage of FunkyHuawei is that they have a good track record with XDA and other services, a refund policy, and just you know what you are getting into. You can ask for a refund if the code does not work.
3.) Ministry of Solutions for €30
A lot of XDA users had success with this method also. I don't know much information about this method, but the ysay they offer a refund if the code doesn't work.
Got the code? Good. You are mostly done now...
Install ADB and Fastboot. I'm not going to give a guide on how, you can search for it. Download and install Hisuite from here. Connect your phone to your PC, and open a command prompt on your ADB folder. Run,
Code:
adb reboot bootloader
Wait for your device to reboot and show a screen with title "FASTBOOT & RESCUE MODE". In the next command replace <code> with the unlock code you bought. The next step will wipe all the data on your device, so you might want to backup your important data.
Code:
fsatboot oem unlock <code>
Congratulations, you just unlocked the bootloader of your device. Your warranty is legally void now. Reboot the device with the command;
Code:
fastboot reboot
PART 2: Install TWRP and Magisk
First, connect your SD card to your phone, download Magisk ZIP here, and place it in your SD card.
Reboot to Fastboot again with,
Code:
adb reboot bootloader
Download the TWRP image here and copy it your ADB folder. Use this command to flash TWRP.
Code:
fastboot flash recovery_ramdisk twrp-kirin.img
Hold the power button to turn your phone off. Disconnect your phone from your PC. Now hold the power button and Vol. Up button until the Huawei logo appears, then let go of both buttons. The blue TWRP logo should appear and after a second you would see the TWRP menu. If you see the Keep System Read-Only menu, swipe right.
Go to Install>>Select Storage>>Micro SD Card. You should see the Magisk ZIP you placed there earlier. Select it, and Confirm to flash. After the flashing is over, reboot your phone.
Congratulations, now you have a rooted device!
If you need any help along the way, or end up bricking your device, I will help you the best I can.
Good Luck!
Tested procedure on PAR-LX9
I have tried the method in my Nova 3, PAR-LX9, and I confirm that this works.
I did search a little for the TWRP image since I can't access the TWRP image in your link..
If we can place another thread for the PAR-LX9 thread then that will be great.
By the way, this is my first post at xda, hopefully this post complies with the xda's rules
Cheers
codvph said:
I have tried the method in my Nova 3, PAR-LX9, and I confirm that this works.
I did search a little for the TWRP image since I can't access the TWRP image in your link..
If we can place another thread for the PAR-LX9 thread then that will be great.
By the way, this is my first post at xda, hopefully this post complies with the xda's rules
Cheers
Click to expand...
Click to collapse
Hi, Can you share the link where you got the TWRP? Can't seem to find the proper one. Thank you!
TWRP
june.castillote said:
Hi, Can you share the link where you got the TWRP? Can't seem to find the proper one. Thank you!
Click to expand...
Click to collapse
I can't post outside links for now (haven't got to 10 posts); Will try to send you PM
Note that it works in my unit PAR-LX9. If you have a different phone, flash at your own risk.
Has anyone have tried this with Nova 3i INE-LX2? Also do you have steps for Mac? Thanks!
codvph said:
I have tried the method in my Nova 3, PAR-LX9, and I confirm that this works.
I did search a little for the TWRP image since I can't access the TWRP image in your link..
If we can place another thread for the PAR-LX9 thread then that will be great.
By the way, this is my first post at xda, hopefully this post complies with the xda's rules
Cheers
Click to expand...
Click to collapse
friend do you think you could facilitate the twrp link I also have the par-lx9
TWRP
Julioz13 said:
friend do you think you could facilitate the twrp link I also have the par-lx9
Click to expand...
Click to collapse
here... this TWRP is for PAR-LX1, but I've flashed this and is working in my PAR-LX9
remember to backup before flashing...
drive.google.com/open?id=1X3jaCEUDhR08oPlAHbuwzbA07hrPcmoE
Does Phone unlocked mean bootloader unlocked?
https://forum.xda-developers.com/attachment.php?attachmentid=4633403&d=1541248513
talongt said:
Does Phone unlocked mean bootloader unlocked?
https://forum.xda-developers.com/attachment.php?attachmentid=4633403&d=1541248513
Click to expand...
Click to collapse
It SHOULD, but this device has a bug that causes it to br sometimes incorrectly displayed (Unlocked when actually locked)
Do I have to unlock bootloader first, before root it?
pls specify what version of emui to get the unlock codes.
oof, prices went up. how unfortunate.
codvph said:
here... this TWRP is for PAR-LX1, but I've flashed this and is working in my PAR-LX9
remember to backup before flashing...
drive.google.com/open?id=1X3jaCEUDhR08oPlAHbuwzbA07hrPcmoE
Click to expand...
Click to collapse
thanks friend and some page that you recommend to unlock the bootloader?
jioleight said:
pls specify what version of emui to get the unlock codes.
oof, prices went up. how unfortunate.
Click to expand...
Click to collapse
unlocking bootloader is via fastboot, so I don't think the version of EMUI is important
for reference: I unlocked mine back when EMUI was 8.2
---------- Post added at 09:59 AM ---------- Previous post was at 09:57 AM ----------
Julioz13 said:
thanks friend and some page that you recommend to unlock the bootloader?
Click to expand...
Click to collapse
global unlocking solutions.. the link is in the Nova 3i root/twrp guide
forum.xda-developers.com/nova-3/how-to/guide-how-to-install-twrp-root-huawei-t3878946
payment is via paypal.. you can message them via viber or e-mail.. they respond promptly..
Hi, the link to download the TWRP is not working. I need the recovery for INE-LX1, P Smart Plus. Could you help me? I'm trying to root my P Smart Plus.
Thanks in advance.
I'm using par-lx2...
waiting dear dev did some miracle.
firstly I'm hoping unlock bootloader and root, superSU or magisk. then I'm hoping some lineageOS or statixOS.
a moment of silence for my hopes...
No options to unlock bootloader nova 3i
NO OPTIONS TO UNLOCK BOOTLOADER NOVA 3I,
ABOVE LINKS ARE NOT WORKING.
Supersonic27543 said:
This is a guide on how to unlock the bootloader, install TWRP, and root your Huawei Nova 3i/P Smart+. (INE-LX1/INE-LX2). You need at least $20 to unlock the bootloader.
Thanks for @medoamer for trying this first and helping me out!
Code:
#include <std_disclaimer.h>
/*
* Your warranty will be void if you follow this guide.
*
* Only YOU are responsible for any damage done to your
* device by following this guide. I'm not affiliated with, or
* responsible for any service mentioned below.
*
*/
You will need:
-A working Nova 3i/P Smart+.
-$20/$22/$55 depending on your preferences.
-A Windows PC. (PM me if you have a Linux one, I will update the guide accordingly)
-A working SD card that is tested and working with your phone.
-A reliable USB cable which works for connecting your phone to your PC.
-A backup (optional)
PART 1: Bootloader Unlock
To unlock your bootloader you need a bootloader unlock code. Huawei stopped giving bootloader codes in end of July. But you can buy one in one of the webistes below. You have to send your IMEI to them, and they will generate the unlock code and send it to you. You can see your IMEI at System>>About Phone>>IMEI.
1.) Global Unlocking Solutions for $20/$22
First of all, I know that the website looks super sketchy. But @medoamer, myself, and a lot of other XDA users had success with this method. I spent the extra $2 for the fast service, but it is up to you.
2.) FunkyHuawei for $55
The advantage of FunkyHuawei is that they have a good track record with XDA and other services, a refund policy, and just you know what you are getting into. You can ask for a refund if the code does not work.
3.) Ministry of Solutions for €30
A lot of XDA users had success with this method also. I don't know much information about this method, but the ysay they offer a refund if the code doesn't work.
Got the code? Good. You are mostly done now...
Install ADB and Fastboot. I'm not going to give a guide on how, you can search for it. Download and install Hisuite from here. Connect your phone to your PC, and open a command prompt on your ADB folder. Run,
Code:
adb reboot bootloader
Wait for your device to reboot and show a screen with title "FASTBOOT & RESCUE MODE". In the next command replace <code> with the unlock code you bought. The next step will wipe all the data on your device, so you might want to backup your important data.
Code:
fsatboot oem unlock <code>
Congratulations, you just unlocked the bootloader of your device. Your warranty is legally void now. Reboot the device with the command;
Code:
fastboot reboot
PART 2: Install TWRP and Magisk
First, connect your SD card to your phone, download Magisk ZIP here, and place it in your SD card.
Reboot to Fastboot again with,
Code:
adb reboot bootloader
Download the TWRP image here and copy it your ADB folder. Use this command to flash TWRP.
Code:
fastboot flash recovery_ramdisk twrp-kirin.img
Hold the power button to turn your phone off. Disconnect your phone from your PC. Now hold the power button and Vol. Up button until the Huawei logo appears, then let go of both buttons. The blue TWRP logo should appear and after a second you would see the TWRP menu. If you see the Keep System Read-Only menu, swipe right.
Go to Install>>Select Storage>>Micro SD Card. You should see the Magisk ZIP you placed there earlier. Select it, and Confirm to flash. After the flashing is over, reboot your phone.
Congratulations, now you have a rooted device!
If you need any help along the way, or end up bricking your device, I will help you the best I can.
Good Luck!
Click to expand...
Click to collapse
@Supersonic27543 your TWRP link posted in OP to 4PDA is dead, as seen in screenshot..
@daveyannihilation why did you delete my previous post?
hinxnz said:
@Supersonic27543 your TWRP link posted in OP to 4PDA is dead, as seen in screenshot..
@daveyannihilation why did you delete my previous post?
Click to expand...
Click to collapse
Dude what the fudge are you talking about? I haven't deleted any post of yours.
daveyannihilation said:
Dude what the fudge are you talking about? I haven't deleted any post of yours.
Click to expand...
Click to collapse
Hey sorry bout that man, must of been my bad :cyclops:
Can anyone help me?
I can't for the life of me get Magisk to install on my Nova 3i. Every time i install it with TRWP, the install runs fine, then when i reboot the device, it says "Magisk not installed"??? I've tried updating, it doesn't work. Ive tried to download the official firware, but the extractor tool doesnt work with Nova 3i. Anyone help me???
Thanks