Develop Bugs

[Q] Bricked my galaxy gio please help

I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem

johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
can u try another computer with same ver of firmware & odin

johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)

Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app

tried it
coolsandie said:
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)
Click to expand...
Click to collapse
ive used 3 different versions of odin 4.38 4.42 and odin3 v1.85 I cant get to the splash screen just the galaxy gio screen only odin3 v1.85 can read it but at the galaxy gio screen not in download mode ive tried 1click unsoft brick it asks me if my phone is plugged in and in download mode ive made sure kies wasn't running as well everytime I tried and kies 2.0 doesn't support my device it tells me,and that's also at the galaxy gio screen in download mode it doesn't even show up im also running windows 8 as well if that helps anyone figure this problem out for me

used new ops files too
SpaceCaker said:
Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
ive used the pit file but not before I used gio v1.0 ops and cooper ops files also none worked

Soft bricked Gio
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone

s4meq said:
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone
Click to expand...
Click to collapse
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/

Phone now repaired
ptugalx said:
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.

s4meq said:
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.
Click to expand...
Click to collapse
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)

can't update
ptugalx said:
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)
Click to expand...
Click to collapse
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.

s4meq said:
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.
Click to expand...
Click to collapse
see it here_http://forum.xda-developers.com/showthread.php?t=1342190

Thanks
ptugalx said:
see it here_http://forum.xda-developers.com/showthread.php?t=1342190
Click to expand...
Click to collapse
Well, just installed through recovery and pheixz CWM recovery works like a charm. I am now using cm 9 by maclaw. Just a signal problem as this phone was bought from overseas

s4meq said:
A signal problem as this phone was bought from overseas
Click to expand...
Click to collapse
Flash your country's baseband.

Thanks
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
This is what Im doing, but why odin v3.09? I have the ops file and the correct version of Odin. (v4.42)
http://www.sammobile.com/firmwares/3/?download=8660
I also want just the baseband.

I did it, but..
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?

s4meq said:
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?
Click to expand...
Click to collapse
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:

waqaswasil said:
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:
Click to expand...
Click to collapse
No... There was no water damage, only 1 drop 2 years ago which the phone survived. It was from knee height. I flashed the S5660KKT3 baseband through Odin. Is it the right one? Also, my phone was broken and I got it repaired. when it came back the signal was 5 bars, when I put my SIM card in, but when I installed maclaw's cm9 it was poor. Reboots seem to fix the problem.

[Q] Note II N7100 don't boot | no Odin errors

Hi! I'm new in here.
I have a big problem. I putted on the resurrection remix 5.0 rom. But I didn't like it because of the camera, multiwindows, little bugs ecc.
So I wanted to turn to stock. So I downloaded the latest firmware H3G Italy 4.4.2 and flashed it with Odin 3.09 first and it didn't work and then with Odin 3.07 and it still didn't work. :crying: :crying: :crying: It is stuck on SAMSUNG whrite
Odin don't give me any errors. At the end it sees Pass! (something like that)
What can I do? Why stock is bricking my phone :crying:
Sorry for my bad english :crying::crying::crying:

don't worry just download 4 files software 4.4.2 then flash it by Odin
I had same as your problem before

HaZa3 said:
don't worry just download 4 files software 4.4.2 then flash it by Odin
I had same as your problem before
Click to expand...
Click to collapse
what do you mean with 4 files software? thanks god for your responding... and yours obviosly

bogdan1995 said:
what do you mean with 4 files software? thanks god for your responding... and yours obviosly
Click to expand...
Click to collapse
He means emergency firmware but not exist for 4.4.2, this was for 4.1.2 and you cannot flash because your bootloader not leaving downgrade first and if you flash 2cond you loose your imei because of efs partition upgrade. Probably you haven't factory reset your phone before flash, go to recovery and factory reset your phone and restart.
Send from my phone

vagsvag said:
He means emergency firmware but not exist for 4.4.2, this was for 4.1.2 and you cannot flash because your bootloader not leaving downgrade first and if you flash 2cond you loose your imei because of efs partition upgrade. Probably you haven't factory reset your phone before flash, go to recovery and factory reset your phone and restart.
Send from my phone
Click to expand...
Click to collapse
thank you man! i found in internet how to go to the recovery (i didn't try before because I didn't know I had a recovery ).
PROBLEM SOLVED. THANKS ALL OF YOU. YOU ARE SPECIAL GUYS.
ps: I'm in love with my stock... everything. at the end touchwhitz isn't so bad

Not going to fast boot or anything..

Guys pl help me out here.. My phone is fully dead .. It is not going to fast boot any more.. I was running PAC man ron.. I unknowingly flashed Multirom manager.zip for nexus 5.. My phone is not booting and its fully dead.. ppl pls healp me I am totally upset .. I cant do anything...

Flash stock rom, device will boot..
If you don't know how to flash stock rom,
search for root threads in general section of this device
Once ur device boot.. U can do whatever u want to do..
U will need
flashtool
Stock rom
Laptop or pc for using flash tool
And Data cable
There are tutor how to flash stock rom in general section
Check root thread's for that..
U need to connect device in flash mode for that
I'm from mobile so cannot help much..
Sent from my D5322 using XDA app

rrd84 said:
Flash stock rom, device will boot..
If you don't know how to flash stock rom,
search for root threads in general section of this device
Once ur device boot.. U can do whatever u want to do..
U will need
flashtool
Stock rom
Laptop or pc for using flash tool
And Data cable
There are tutor how to flash stock rom in general section
Check root thread's for that..
U need to connect device in flash mode for that
I'm from mobile so cannot help much..
Sent from my D5322 using XDA app
Click to expand...
Click to collapse
Bro, I know to flash roms and all that things...I have many experience in flashing roms.. Now MY problem is I CANNOT go to either fastboot or flash mode.... I dont konw why my phone is not even gng to fastboot ... If I click the power button there is vibrations. The battery was at 75%.

ok..
hold *volume up+power button till 3 vibrations.
then tried fastboot or flashtool mode

rrd84 said:
ok..
hold *volume up+power button till 3 vibrations.
then tried fastboot or flashtool mode
Click to expand...
Click to collapse
Yeah also did that but no vibrations is coming..

then
Rahul1608 said:
Yeah also did that but no vibrations is coming..
Click to expand...
Click to collapse
then.. something really bad happen i think..
try sony pc companion, sometimes it works.. when nothing else does..
else.. service center

rrd84 said:
then
then.. something really bad happen i think..
try sony pc companion, sometimes it works.. when nothing else does..
else.. service center
Click to expand...
Click to collapse
NO bro not connecting.. I think the only way is service center... Anyway thanks for your response

Rahul1608 said:
NO bro not connecting.. I think the only way is service center... Anyway thanks for your response
Click to expand...
Click to collapse
Try pressing the reset button located on the sim tray. I hope that will be helpful

Try this - download the latest flash too and either 4.4 or 5.0 ftf. slect the appropriate ftf and once it is ready to flash, ie., when it prompts you to connect your phone, connect the phone to the laptop with vol - pressed. It should detect the phone. This method would wipe out the entire internal of the phone and do a clean install. Unlikely this should not work.

kan_ranga said:
Try this - download the latest flash too and either 4.4 or 5.0 ftf. slect the appropriate ftf and once it is ready to flash, ie., when it prompts you to connect your phone, connect the phone to the laptop with vol - pressed. It should detect the phone. This method would wipe out the entire internal of the phone and do a clean install. Unlikely this should not work.
Click to expand...
Click to collapse
Pls understand my major prob is I am not able to go to flash mode or even fastboot.

i can understand not able to get into fastboot mode (probably your bootloader is messed), but how did you figure out your device not getting into flash mode. You have not mentioned about how it behaved with flashtool. What does it say when you connect it to the laptopn with only vol- pressed?

Connect ur charger and say wat happens?

i have same issue please help me guys
:crying::crying:i have same issue please help me guys :crying::crying:
please help me :crying::crying:

Bhg73 said:
:crying::crying:i have same issue please help me guys :crying::crying:
please help me :crying::crying:
Click to expand...
Click to collapse
Please provide more details on what is the behavior of your device and what have you done so far

The fastboot is working and i have downloaded indian version of latest D5322_Customized IN_1280-6721_19.3.A.0.472_R4C and make ftf file and tried to flash but its says You must have the according fsc script to flash this device.
also strange thing found i had flashed dual recovery and both recovery working properly (i am stucked in bootloop because i had flashed supersu.zip provided by chainfire)
any help appreciate thanks in advanced

Bhg73 said:
The fastboot is working and i have downloaded indian version of latest D5322_Customized IN_1280-6721_19.3.A.0.472_R4C and make ftf file and tried to flash but its says You must have the according fsc script to flash this device.
also strange thing found i had flashed dual recovery and both recovery working properly (i am stucked in bootloop because i had flashed supersu.zip provided by chainfire)
any help appreciate thanks in advanced
Click to expand...
Click to collapse
1.This is not Q&A troubleshooting forum so please ask in that forum frm next onwards
2.
What's ur phone model?
Which flashtool?
Whats the flashtool version?
Do u installed the flash tool drivers properly?
Could yu also plz provide some snaps

Phone model: T2 ultra dual(D5322)
flashtool : flashtool by androxyde
flashtool version 0.9.19.0
yes i have installed flashtool drivers properly

pvnsai73 said:
Connect ur charger and say wat happens?
Click to expand...
Click to collapse
For few minutes it glows red and after that it goes off and for few hours the phone feels warm and after that it become cool.. No green led ..:crying:

pvnsai73 said:
Connect ur charger and say wat happens?
Click to expand...
Click to collapse
If i connect it to computer by pressing vol- , it says usb cannot be recogonising

Recovered
finally i managed to recover my phone
i have downloaded old flashtool 0.9.18.6
And flash was successful

Samsung A5 2017 bricked

Hello everyone,
I have a A5 2017 that's bricked and i don't know what to do with it. It doens't want to start anymore. ( Keeps showing Samsung and keeps restarting.)
For some reason i can't get a firmware on it.
Plz help

can you boot into download mode ?

Dav21t said:
can you boot into download mode ?
Click to expand...
Click to collapse
If you can this, try reinstall stock rom with ODIN.

darknet_br said:
If you can this, try reinstall stock rom with ODIN.
Click to expand...
Click to collapse
Exactly!

Be sure to have the latest Odin. Because of the new files types.
https://samsungodin.com

do u see something or a red message like 'blocked by frp lock?' while the phone booting?

realme 6 pro bricked. please help me...

hi all, i accidently bricked my phone.. and my bootloader is locked. the only mode I'm able to boot is stock recovery. and no fastboot mode available, is there any potential fix other than going to service center?

try doing hard reset from stock recovery crossing your fingers.

SignatureBoy said:
try doing hard reset from stock recovery crossing your fingers.
Click to expand...
Click to collapse
no use ((

dreadmachine said:
no use ((
Click to expand...
Click to collapse
Have you tried Flash tool ??

SignatureBoy said:
Have you tried Flash tool ??
Click to expand...
Click to collapse
didn't recognize coz only recovery mode

dreadmachine said:
didn't recognize coz only recovery mode
Click to expand...
Click to collapse
My friend i am not a developer but
If RFT doesn't work for you, The only solution would be you go to service center, they can help you with your issue.
Tell them that you got this issue after rcvd an OTA and do not say a word other than that as your bootloader is still locked i hope this will work and your warranty will still be used.