thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0
I hve taken his installer and modded to work according to my need but dont think that I have just copied and pasted the installer
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android
from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad (windows)
Click to expand...
Click to collapse
this patch will let you flash other I897 or t959 roms I have not tried it on other variant but you can try and let me know if it works I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom, don't think that s2 roms can work but you can always try
Click to expand...
Click to collapse
how to use this patch:-
first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
* AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* GALAXY S patch v1.0:- http://bit.ly/JSFuLB (12mb)
Click to expand...
Click to collapse
PROS:-
1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:-
1. you cannot get the build properties of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
update:- keep the thanks coming guys and I will add the support of aroma installer and new things just keep me encouraged by pressing thanks
Click to expand...
Click to collapse
update 2:- hi all if you like my work please rate this thread with 5 stars and also submit it as news tip
Click to expand...
Click to collapse
update 3:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.:- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q.:- while flashing a captivate or vibrant ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for galaxy s
Click to expand...
Click to collapse
Q.:- can I flash another galaxy s ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I897 or T959
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and rate this thread with 5 stars, I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided
Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
update:- modem have been included in v1.1
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.2
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
Tested roms
a list of tested roms is here
1. icssgs rc1.0.1
2. fusion cm9 beta
Wow.. Freedom!!
Thanks, I will give it a try tomorrow
hey
thanks for the patch.its what i need it.which 1 i need to flash 1st?the rom or the patch?
Sent from my GT-I9000 using Tapatalk
first flash the rom and then flash the patch if you get assert failed error while flashing rom first flash patch then rom then again patch
That mean with this patch. I can flash Cappy's rom or Vibrant's rom on I9000 and reverse?
dhlalit11 said:
first flash the rom and then flash the patch if you get assert failed error while flashing rom first flash patch then rom then again patch
Click to expand...
Click to collapse
about the cons part can you explain more when i flash this patch?what is build properties?
sorry if this a nood question
Sent from my GT-I9000 using Tapatalk
what do this patch? I can flash rom from I9100 on I9000?
dawidk750i said:
what do this patch? I can flash rom from I9100 on I9000?
Click to expand...
Click to collapse
No,it's only for other Galaxy S variants.
Inviato dal mio GT-I9000 con Tapatalk 2
can i flash google nexus s roms with this patch?
Maybe a noob question, what is this exactly? A guide would be appreciated.
This is what i understand:
As for now I can flash any ICS rom build for GT i9000, SGH-T959, SGH-T959V, SGH-I897, SPH-D700, SCH-I500, SGH-I896, GT-I9000T, SHW-M110S, etc.?
After the rom flash i must flash this patch?
What portions of my phone are altered to accomplish this unique feature?
Is that TWRP 1.0? Is it possible to have v2.1?
Sent from my GT-I9000 using xda prem!!ium
sorry i didnt understand clearly. what does this patch do
zuluman said:
sorry i didnt understand clearly. what does this patch do
Click to expand...
Click to collapse
This patch allows you to install other roms created for Galaxy S variants like Captivate or Vibrant
Inviato dal mio GT-I9000 con Tapatalk 2
thread updated I think I have cleared everything but if it is not you can ask
I tried google nexus s ics stock rom without this patch ,just changed the kernel with our kernel and phone boot
Has anyone tried flashing official galaxy S2's ICS on galaxy s with this patch?
Sent from my GT-I9000 using XDA
Related
I'm pleased to present my repack of the stock ROM for the HTC Vision! READ THIS WHOLE POST BEFORE YOU START! No, really, it contains everything you need to know.
Remember that if you use this ROM, you do so entirely at your own risk!!
About MoDaCo stock ROM repacks
Unlike a MCR (MoDaCo Custom ROM) release, a stock ROM repack is as close to the stock ROM as possible. Only root / Superuser and an insecure boot image is added. The benefits of the repack are providing a rollback option in update zip format as well as providing an online kitchen to remove parts that are not required.
A MCR release of this ROM is also available!
Requirements
In order to use this ROM on your device, you must have a custom recovery image installed (Clockwork Mod).
THIS ROM SHOULD RUN ON BOTH THE G2 AND THE DESIRE Z!
Features
Repack of the 1.22.531.8 (OTA) ROM
Pre-rooted with su and Superuser Permissions by ChainsDD
Insecure boot image (ro.secure=0)
Changelog
Please see the post below this one for the changes in each release.
Installation
To install this ROM:
Download the zip file of your choice from the links below (or the online kitchen) and copy to your SD card
Restart your device in recovery mode
PERFORM A NANDROID BACKUP FROM THE MENU
Select the option to apply an update zip, and select the zip file you copied to your memory card
Upgrading
No wipe is explicitly required in order to use this ROM (unless you are coming from a 'Sense' ROM), however if you do encounter issues of any kind, it is recommended that you wipe your device and reproduce the issue before raising it here.
Downloads
This ROM is now available in the online kitchen - see the post below for details! In addition to the kitchen, a prebaked download is available.
DOWNLOAD
Thanks
It's impossible to mention everyone who contributes to the Android community by name, but to everyone out there who does great work and shares it with us all - you have my gratitude and respect.
And finally...
Details on how to donate should you wish to do so are in download topic at MoDaCo.
Enjoy!
P
Changelog
11/Nov r1
Initial Release
Let me know how you get on people!
MCR'd version and Sense stock / MCR for both G2/Z to follow (soon)!
P
just flashed this. pretty fast,
thanks paul!
COOKIN' ROMS LIKE A BOSS
Thanks, Paul. Looking forward to your SenseUI build for American Visions
Works perfectly. Very snappy. Using it with the ROM kitchen is a nice way to customize exactly the ROM you want. I used that to keep my old email.apk that doesn't ask for a alphanumeric password every time I want to use the phone.
Like butter
Is busybox preinstalled also? I'm sure it is...but just making sure
Actually, I don't see it in xbin, weird....
thank u so much for this... using sense with this phone was like installing kde on freebsd.... much rather have fluxbox...
if i flash this over bacon bits will this return me to the pre-bacon bits - post ota stock kernel without oc?
sino8r; said:
Is busybox preinstalled also? I'm sure it is...but just making sure
Actually, I don't see it in xbin, weird....
Click to expand...
Click to collapse
I installed it from the market after Titanium wouldn't run. Problem solved
JonInAtl said:
I installed it from the market after Titanium wouldn't run. Problem solved
Click to expand...
Click to collapse
Okay, good! I was having trouble installing last night so I just put in xbin manually. Thats no problem then... thanks!
sino8r said:
Is busybox preinstalled also? I'm sure it is...but just making sure
Actually, I don't see it in xbin, weird....
Click to expand...
Click to collapse
No, but i'm going to add it.
P
sundar2012 said:
if i flash this over bacon bits will this return me to the pre-bacon bits - post ota stock kernel without oc?
Click to expand...
Click to collapse
Correct.
P
Pual, I for the life of me can't seem to get this overclocked. I should be able to overclock this using the steps in the link below correct? Oh, and by the way I love the rom. I used baconbit, which was great until i found out I couldn't use my extended battery on it.
http://forum.xda-developers.com/showthread.php?t=813681
I've done a total wipe and installed your rom and my app with titanium. Here's the link.
I've put the ota ko file in the root of the my sd. And ran the attached .sh files in gscript, but all i get is errors.
Edit: nevermind I see that the OP to the overclocking post no longer supports it. I guess ill have to go with the new kernal and hope it works with extended batteries. Thanks for reading.
blaaaaa
i used this rom there was bs
pbedard said:
i used this rom there was bs
Click to expand...
Click to collapse
Who in the what now?
P
paulobrien said:
Who in the what now?
P
Click to expand...
Click to collapse
that was comedy
thatruth132 said:
that was comedy
Click to expand...
Click to collapse
Lmfao!!
Sent from my T-Mobile G2 using XDA App
Hi
this is som mods i created for the [ROM] madmack's 1.4 (KE7 - RTL + Arabic support)
1- what is the mods:
Added DSP Manager
Added Extended Power menu
Added CWM Package
CRT Screen-Off Animation
Overscroll glow
Phone.apk without increasing ring
Hacked Camera.APK for better audio quality, usage with any battery life!
GTalk 1.3 with Video
2- how to install
first download this file
http://www.multiupload.com/OALWNUOPUP
and put is it into your internal sd
2nd install this kernel from http://forum.xda-developers.com/showthread.php?t=1103399
and flash it with Odin
3 go to your CWM recovery mod
Install zip from Sdcard
choose zip from sdcard
MedMac Rom 1.4 moded by DR.AKRIM.zip
yes - install MedMac Rom 1.4 moded by DR.AKRIM.zip
Go Back then Reboot system now
fin
thanks for all members and my best friend MedMac
i am very interested in the RTL mode but i am still on the original ROM and rooted. your mode is only for the madmack's ROM?
KukurikU said:
i am very interested in the RTL mode but i am still on the original ROM and rooted. your mode is only for the madmack's ROM?
Click to expand...
Click to collapse
take this file run it form the recovery this will arabize any rom with out changing any thing in any rom
http://www.multiupload.com/AUS0SYTAFO
thanks
hani1980 said:
take this file run it form the recovery this will arabize any rom with out changing any thing in any rom
http://www.multiupload.com/AUS0SYTAFO
thanks
Click to expand...
Click to collapse
Hii all of you!! wwhy both of files doesn't work for my SGSII. It makes me stuck at the boot logo. i run a stock KE7CF-rooted. I'm from tunisia and i need only a simple file to patch to get only arabic without dsp manager and other mods. Thank you guys and Good luck for this work
hani1980 said:
Hi
this is som mods i created for the [ROM] madmack's 1.4 (KE7 - RTL + Arabic support)
...
Click to expand...
Click to collapse
Can you help Me please? I want to have all parts of this MOD expect the over-scroll glow. Can you help Me please? Or can you provide me a file to flash. Thank you.
Best Regards
hani1980 said:
take this file run it form the recovery this will arabize any rom with out changing any thing in any rom
http://www.multiupload.com/AUS0SYTAFO
thanks
Click to expand...
Click to collapse
Thanks, works great!
hani1980 said:
take this file run it form the recovery this will arabize any rom with out changing any thing in any rom
http://www.multiupload.com/AUS0SYTAFO
thanks
Click to expand...
Click to collapse
Thank You! I have already perfect Hebrew (RTL, numbers...etc) with the help of the attached files. being rooted and using Root Explorer all i had to do is to copy and overwrite the original ones (first i did a copy of the originals and a backup ). maybe same files with yours??
anybody interested feel free to try them.
http://www.multiupload.com/GWBW62M0B2
KukurikU said:
Thank You! I have already perfect Hebrew (RTL, numbers...etc) with the help of the attached files. being rooted and using Root Explorer all i had to do is to copy and overwrite the original ones (first i did a copy of the originals and a backup ). maybe same files with yours??
anybody interested feel free to try them.
http://www.multiupload.com/GWBW62M0B2
Click to expand...
Click to collapse
Which ROM you are using? Is it needed to be deodexed or not?
TAEL said:
Which ROM you are using? Is it needed to be deodexed or not?
Click to expand...
Click to collapse
i am using lite'ning ROM:
http://forum.xda-developers.com/showthread.php?t=1095274 in madmack's blog (you can find his ROM in this forum) the deodexed appear as a must:
http://blog.devasque.com/?page_id=11#english
i didn't use his method, i only copied the files.
i am not even sure that this are the exactly same files. i got my files from an Israelian forum (if you know Hebrew i can send you the link). from the forum i understood that madmack's ROM is Arabic supported already and that in lite'ning ROM the files should be applied (copied).
hope i helped.
I'm pleased to present my repack of the stock ROM for the HTC Vision! READ THIS WHOLE POST BEFORE YOU START! No, really, it contains everything you need to know.
Remember that if you use this ROM, you do so entirely at your own risk!!
About MoDaCo stock ROM repacks
Unlike a MCR (MoDaCo Custom ROM) release, a stock ROM repack is as close to the stock ROM as possible. Only root / Superuser and an insecure boot image is added. The benefits of the repack are providing a rollback option in update zip format as well as providing an online kitchen to remove parts that are not required.
A MCR release of this ROM is also available!
Requirements
In order to use this ROM on your device, you must have a custom recovery image installed (Clockwork Mod).
THIS ROM SHOULD RUN ON BOTH THE G2 AND THE DESIRE Z!
Features
Repack of the 2.15.531.3 (OTA) Gingerbread ROM
Pre-rooted with su and Superuser Permissions by ChainsDD
Insecure boot image (ro.secure=0)
Changelog
Please see 2 posts below this one for the changes in each release.
Installation
To install this ROM:
Download the zip file of your choice from the links below (or the online kitchen) and copy to your SD card
Restart your device in recovery mode
PERFORM A NANDROID BACKUP FROM THE MENU
Select the option to apply an update zip, and select the zip file you copied to your memory card
Upgrading
No wipe is explicitly required in order to use this ROM (you should be particularly safe if coming from a near-stock ROM), however if you do encounter issues of any kind, it is recommended that you wipe your device and reproduce the issue before raising it here.
Downloads
The ROM is packaged for installation via ClockworkMod. The radio / baseband is packaged for installation via either renaming to PC10IMG.zip and copying to SD card then rebooting to bootloader or by 'fastboot flash'ing the radio (both of which will likely require your device to be 'S-OFF / ENG' bootloader).
A MCR will follow soon.
[Edit: It looks like Mediafire are having some issues with redirects atm, if you get a 404, give it a few tries!]
ROM 2.15.531.3 - DOWNLOAD - MD5: e4043e741d75dfc7e3771ff457f6c49d
ROM 2.15.531.3 de-odexed - DOWNLOAD - MD5: 7e878091f419a4d518cdc0c8a4bfedf8
Radio / Baseband 26.08.04.30_M3 - DOWNLOAD - MD5: 54df99c578a0cc1b39b7fc6911ef8ec4
Thanks
It's impossible to mention everyone who contributes to the Android community by name, but to everyone out there who does great work and shares it with us all - you have my gratitude and respect.
And finally...
Details on how to donate should you wish to do so are in download topic at MoDaCo.
Enjoy!
P
OMG I LOVE YOU SO MUCH. To clarify, we can install this just like any other rom right? Does not have to be on top of stock froyo?
Yeah, you can flash it on top of anything. Usual caveats apply, backup first blah blah etc. etc.
P
paulobrien said:
Yeah, you can flash it on top of anything. Usual caveats apply, backup first blah blah etc. etc.
P
Click to expand...
Click to collapse
Thank you so much. I'm sure there are lots of people that are gonna be very happy when they see this
Paul, the download link for the ROM isn't working for me. I can get through the text verification, but then the download fails. Any idea?
edit: nevermind, worked on 3rd try
tun4f1sh said:
Paul, the download link for the ROM isn't working for me. I can get through the text verification, but then the download fails. Any idea?
edit: nevermind, worked on 3rd try
Click to expand...
Click to collapse
Yes, it looks like Mediafire have some issues atm.
P
De-odexed version now online!
P
Nice work! Tyvm
Sent from my HTC Vision using XDA App
Can you elaborate on the "uncensored" DNS servers? What's wrong with the defaults? Is it easy to revert to the defaults?
Paul, can you clarify if this requires you to be running the last FroYo tmo OTA? Or can this be flashed from a clean wipe? I looked at the file system in the zip, and it looks like a full ROM, but I just flashed the odex'd version and got stuck at the HTC splash. Thanks man.
its a full rom i cleaned wiped & flash the deodex & it runs great so far
Love this ROM. Super clean &fast. I just have 2 questions. 1 Is there a taptowake link some one can send me or post. 2 do I really need to flash the new baseband & radio seems fine without it.
Duplicate Post
Lockedown said:
Can you elaborate on the "uncensored" DNS servers? What's wrong with the defaults? Is it easy to revert to the defaults?
Click to expand...
Click to collapse
Uh what?
P
paulobrien said:
Uh what?
P
Click to expand...
Click to collapse
Is it required to flash baseband & radio & could you post a link or anyone else for taptowake?
tun4f1sh said:
Paul, can you clarify if this requires you to be running the last FroYo tmo OTA? Or can this be flashed from a clean wipe? I looked at the file system in the zip, and it looks like a full ROM, but I just flashed the odex'd version and got stuck at the HTC splash. Thanks man.
Click to expand...
Click to collapse
You can flash this on top of anything, probably without wiping if coming from a near stock build as the actual ota is non wipe.
P
Vandale said:
Is it required to flash baseband & radio & could you post a link or anyone else for taptowake?
Click to expand...
Click to collapse
Baseband / radio recommended.
P
Vandale said:
Love this ROM. Super clean &fast. I just have 2 questions. 1 Is there a taptowake link some one can send me or post. 2 do I really need to flash the new baseband & radio seems fine without it.
Click to expand...
Click to collapse
Its not ABSOLUTELY NECESSARY BUT they built this rom to work SPECIFICALLY with that radio. So why not have it work at 100%?
paulobrien said:
Uh what?
P
Click to expand...
Click to collapse
The uncensored DNS servers was listed in the original thread:
http://forum.xda-developers.com/showpost.php?p=16322309&postcount=466
Also, anyone on rooted stock 2.2 tried this?
Since Many of you people will be needing this kernel. I uploaded this Thread.
This also Works with CM10
Arco Kernel.zip- Only works with cm9 and cm10 Alpha1
CM9 Beta 4 Kernel- Only works with CM9
Cm10 alpha version 3.0 kernel- In slim bean...the WiFi didn't work for me. Works only with jelly bean ROMs
Cm10 ARCO kernel build 3 version 2.6 with camera working. Works properly in SlimBean
Camcory's SlimBean Kernel- People say that it has Very GOOD BATTERY LIFE. I haven't tested in CM10( Hopefully there won't be problems)
I wont upload build 4 kernel of cm10 since 4.1 is just an updated version of build 4
CM10 Build 4.1- Never tested. Version 3.0 and 2.6 Uploaded. Only works on Jelly bean based ROMs
CM9 RC1 and RC2- Never tested. Version 2.6 Uploaded. Only works of ICS Based ROMs
Instructions:
Download Attachment
Flash Via CWM.
Clean Cache
Wipe Dalvik.
Reboot.
I will update his kernel as soon as he updates his builds.
jassim007 said:
Since Many of you people will be needing this kernel. I uploaded this Thread.
This also Works with CM10
Instructions:
Download Attachment
Flash Via CWM.
Clean Cache
Wipe Dalvik.
Reboot.
I will update his kernel as soon as he updates his builds.
Click to expand...
Click to collapse
It's 3.0 kernel ?
Doesn't boot, after flashing this zip file.
Mikyno said:
It's 3.0 kernel ?
Doesn't boot, after flashing this zip file.
Click to expand...
Click to collapse
No its not 3.0. It worked for me with cm9b3.
Mikyno said:
It's 3.0 kernel ?
Doesn't boot, after flashing this zip file.
Click to expand...
Click to collapse
Which rom?
jassim007 said:
Which rom?
Click to expand...
Click to collapse
Cm10...
Mikyno said:
Cm10...
Click to expand...
Click to collapse
Currently...I only test on cm9. I will test on cm10 .
jassim007 said:
Since Many of you people will be needing this kernel. I uploaded this Thread.
This also Works with CM10
Instructions:
Download Attachment
Flash Via CWM.
Clean Cache
Wipe Dalvik.
Reboot.
I will update his kernel as soon as he updates his builds.
Click to expand...
Click to collapse
Is it necessary to clean cache and wipe dalvik?
AzizWahid said:
Is it necessary to clean cache and wipe dalvik?
Click to expand...
Click to collapse
Recommended. If you don't want to...its OK.
Which arco's kernel? is it OC/UV or not? what tweaks are added on it or is it just plain? you need to give us some information bro.
Mikyno said:
It's 3.0 kernel ?
Doesn't boot, after flashing this zip file.
Click to expand...
Click to collapse
Im very sorry for your bootloop. I have uploaded CM10 Alpha2 kernel
7amada100 said:
Which arco's kernel? is it OC/UV or not? what tweaks are added on it or is it just plain? you need to give us some information bro.
Click to expand...
Click to collapse
Just the kernel he made. No tweaks and no OC/UV
I have uploaded Version 3.0 kernel from Arco.
will this work in galaxy s plus?
Sent from my GT-I9001 using xda app-developers app
Ezekiel1998 said:
will this work in galaxy s plus?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure of that. Mostly it won't work and your might get soft bricked or hard bricked. So be carful what you're doing.
jassim007 said:
I have uploaded Version 3.0 kernel from Arco.
Click to expand...
Click to collapse
Great job. These popular kernels simplify the job of swapping kernel of our choice. :thumbup:
Note: the traditional method of changing kernel is using CWM's advance restore from the boot image.
Sent from my GT-I8150 using xda app-developers app
wong.izzat said:
Great job. These popular kernels simplify the job of swapping kernel of our choice. :thumbup:
Note: the traditional method of changing kernel is using CWM's advance restore from the boot image.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
next time, you can do it in easier way though.
things you need : 1. kernel flashable zip( you can use the one from this thread) 2. boot.img you wanted to flash 3. win rar or 7zip or etc you prefer
the steps
1. extract boot.img you wanted from the rom flashable zip
2. open your kernel flashable zip
3. drag the kernel you just extracted to the kernel flashable zip content
4. voila the boot.img in the kernel flashable zip will be changed to the one you dragged
sorry, OP i'm just helping him, rather than using traditional time wasting method this one is lots faster
hadidjapri said:
next time, you can do it in easier way though.
things you need : 1. kernel flashable zip( you can use the one from this thread) 2. boot.img you wanted to flash 3. win rar or 7zip or etc you prefer
the steps
1. extract boot.img you wanted from the rom flashable zip
2. open your kernel flashable zip
3. drag the kernel you just extracted to the kernel flashable zip content
4. voila the boot.img in the kernel flashable zip will be changed to the one you dragged
sorry, OP i'm just helping him, rather than using traditional time wasting method this one is lots faster
Click to expand...
Click to collapse
Thanks for the advise brother.
I have uploaded Arco Kernel Build 3 Version 2.6 with Camera Working
jassim007 said:
I have uploaded Arco Kernel Build 3 Version 2.6 with Camera Working
Click to expand...
Click to collapse
Oh nice, so I will use kernel 3.0 daily and only flash kernel 2.6 if I need use of camera
Thanks for the post,
using v2.6 in slim bean everything fine.
This is Fully stock I9500XXUFNC1. with Stock kernel with init.d suport. the rom is NO-WIPE. you need to manually clear cache and data
I'm Uploading guys.
This Thread will be updated during.
BACKUP BACKUP BACKUP.
I'm not responsible on any damage you may caused to your device by using this.
i tested the scripts and there is no delete action so i guess it wont harm, but may not work.
V2: Deodexed https://mega.co.nz/#!ptkz3Jpb!drrnWzDv6r11CO92X60VjDCUsRhaWm_BRciGZylMT68
V1.1 Odexedhttps://mega.co.nz/#!19knFQgK!awx3bqVC003_d2JY1GATab5qhOOB-HTKmxg6SmsRog8 V1.1
Thanks :
dsixda - awesome Kitchen
Wanam - Script Ideas
Andreilux - Persues kernel
Samsung - Our Device
zetlaw said:
This is Fully stock I9500XXUFNC1. with Persues kernel. the rom is NO-WIPE. you need to manually clear cache and data
I'm Uploading guys.
This Thread will be updated during.
BACKUP BACKUP BACKUP.
I'm not responsible on any damage you may caused to your device by using this.
i tested the scripts and there is no delete action so i guess it wont harm, but may not work.
https://mega.co.nz/#!QFB0xR4Q!56FVHMgGmFjMco_nIdaXdKzx-qMdl_NKho8md7IXD8Y
Thanks :
dsixda - awesome Kitchen
Wanam - Script Ideas
Andreilux - Persues kernel
Samsung - Our Device
Click to expand...
Click to collapse
Hi m8.
It's nice to see another Rom for our i9500 device.
I want to be sure so I will ask. When u write fully stock Rom and thanks to authors of the mods, how can it be stock?
There are no mods. I think people for things that i used. But the rom is fully stock.
Sent from my GT-I9500 using Tapatalk
zetlaw said:
There are no mods. I think people for things that i used. But the rom is fully stock.
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
So the Rom is fully stock rooted without modes?))
Yep.
Sent from my GT-I9500 using Tapatalk
zetlaw said:
Yep.
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Any bugs we should be aware of?
So people, anyone tried yet? I'll be home in 2 hours and test by myself.
Plz post a log of your rom
And dinner screen shots too
Sent from my GT-I9500 using XDA Premium 4 mobile app
After I flashed the rom with full wipes, it booted snd from the begining it has error: "Unfortunately, Samsung keyboard has stopped". I rebooted, it didn't help. What can I do?
Sent from my GT-I9500 using xda app-developers app
A pre-rooted stock rom in Android Development? Isn't this forum for "development"?
Sent from my GT-I9500 using xda app-developers app
Author, will u reply pls?)
qum said:
After I flashed the rom with full wipes, it booted snd from the begining it has error: "Unfortunately, Samsung keyboard has stopped". I rebooted, it didn't help. What can I do?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Try flashing csc file via odin.
KnifeHead said:
Try flashing csc file via odin.
Click to expand...
Click to collapse
Can u pls provide the file or link to download? (Never did it before)
qum said:
Can u pls provide the file or link to download? (Never did it before)
Click to expand...
Click to collapse
Do your self bro, dont just ask and ask.
This is how:
1. If you have stock rom, head over HERE, extract hidden and cache only, make it .tar then flash it using odin.
OR
2. If you have another custom rom, extract folder system/csc. Extract this cust.rom, copy paste that csc folder in system folder, zip it again with 7zip or windows native zipper, flash via cwm, boot again, using csc changer to change csc.
I sugesting you to try the first one.
Second one need skill so you not trapped in bootloop.
KnifeHead said:
Do your self bro, dont just ask and ask.
This is how:
1. If you have stock rom, head over HERE, extract hidden and cache only, make it .tar then flash it using odin.
OR
2. If you have another custom rom, extract folder system/csc. Extract this cust.rom, copy paste that csc folder in system folder, zip it again with 7zip or windows native zipper, flash via cwm, boot again, using csc changer to change csc.
I sugesting you to try the first one.
Second one need skill so you not trapped in bootloop.
Click to expand...
Click to collapse
New version is coming soon that will fix this issue.
Sent from my GT-I9500 using Tapatalk
zetlaw said:
New version is coming soon that will fix this issue.
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Thank you. Waiting eagerly for this.
P.s: check youf pm.
hey guys its a request
Can someone make a fully stock rooted deodex rom please
It will be a great help
Overheating Issues
I got Overheating issues with all of the Custom ROMs I've tried that are based on the NB3 4.4.2 Firmware. Does this have that, and is noticeable esp. when charging?
Paolonicus said:
I got Overheating issues with all of the Custom ROMs I've tried that are based on the NB3 4.4.2 Firmware. Does this have that, and is noticeable esp. when charging?
Click to expand...
Click to collapse
I Hope it will fix heating problems for you. it contains Perseus Kernel.
CSC problem also fixed, Uploading New Version.
zetlaw said:
I Hope it will fix heating problems for you. it contains Perseus Kernel.
CSC problem also fixed, Uploading New Version.
Click to expand...
Click to collapse
Link isn't working :/