Develop Bugs

[PIC GUIDE] Running Most MAGLDR ROMs On cLK / Switching To cLK from MAGLDR With ROM

Well, this is something that has been asked to me a lot. And to be honest, i was trying to get the answer to these question a few weeks ago. But i have finally prepared a step by step guide on both topic, Running Any Android Rom on cLK and Switching to cLK from MAGLDR. But first, lets see what cLK has to offer compared to MAGLDR. (It doesn't necessarily mean that cLK is better than MAGLDR or MAGLDR is better than cLK)
1) cLK is open source unlike MAGLDR, which means we can modify anything we want and make it better. And there will likely be a lot more updates than MAGLDR because everyone can use the source code and release a new version (for example: arif-ali's cLK 1.4.0.1)
2) cLK has native android like functions with fastboot.
3) cLK does not show any screen between the kernel and spl (the go go go screen), so it feels more like native android.
4) cLK supports fastboot mode (more native android feel)
5) cLK supports use of rom manager
These are just some things i figured out while using cLK, but there are a lots of other things that i have forgot to mention. This doesnt necessarily mean that you should use clk, magldr has a lots of other features that are better than clk like sd boot, windows support, boot menu, tetris D ?) and few more. But if you feel like switching to clk, then this guide should help you out.
Post #2 - Running any MAGLDR rom on cLK
Post #3 - Changing from MAGLDR to cLK without losing any data.
Note: I dont take any responsibility for any damage caused by the use of this guide/tools. Use it at your own risk
Credits:
CharnSingh for improved kernel.
arif-ali for making an flashable zip with beta ril wrapper
Everyone else i forgot
Click to expand...
Click to collapse

!!Warning!! You are warned not to use cLK at any cost if you are a tetris fan! (JK)
!!Warning!! Some sense roms using RAM method might not work using this method!
Not finding a lots of roms for cLK might be one of the reasons why you havent switched to cLK yet. But not anymore, since there is a way to run most magldr roms on cLK. So lets start it step by step:
Running any MAGLDR rom on cLK
1) Go to this link and download HD2 Toolkit i made for making easier to download stuff.
2) Extract the zip file to some folder, and open HD2_Installer.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Click Wipe (Task29) Button.
4) A new window will open. Carefully follow the steps given on the tool. And you will come back to HD2 Toolkit after the tool completes its work.
System Partition Size:
120 MB For AOSP Roms
150 MB For Cyanogenmod/Miui Roms
450 MB For Sense Roms
(These are just average sizes for most roms, if the rom maker has specified a partition size, flash that.)
Click to expand...
Click to collapse
5) Choose cLK Repartition, Choose System Partition Size, Choose Cache Size and press Repartition Button.
6) Press OK on next screen.
7) A new window will open again. Carefully follow the steps given on the tool. And you will come back to HD2 Toolkit after the tool completes its work.
8) You phone will reboot an get stuck on a screen with some text.
9) Choose cLK Install Recovery and press Update.
10) Click yes on next Window.
11) A new command window will open, follow instructions there and you will come back to HD2 Installer after it completes. When your phone reboots, keep holding the home button. Your phone will get into recovery if you do it properly.
12) Download this file and your favourite rom.
13) Choose "mounts and storage" on recovery and choose "USB Mount" after that. Then copy both of those files into your sd card on your computer. Unmount after you finish copying. Press back button on your phone to go back to main screen.
14) Choose "install zip from sdcard" option and isntall the rom first.
15) Install the other downloaded file now (Credit goes to arif-ali for the file, dont forget to thank him )
16) Reboot! And you are done
I hope this helped. Any suggestions/comments welcome.

!!Warning!! Oops no warnings for this post
I am pretty sure that lot of you are waiting for someone to post a tutorial on how to change from MAGLDR to cLK without losing rom or anything. So here you go.
Changing from MAGLDR to cLK without losing any data.
So, without talking, lets start the job
1) Go to this link and download HD2 Toolkit i made for making easier to download stuff.
2) Extract the zip file to some folder, and open HD2_Installer.exe
3) Power off your phone, and hold power button till you get into MAGLDR menu. Then choose "AD Recovery" and go to recovery. Backup your current rom by going to "backup and restore" -> "backup". Make sure your sd card is not full.
4) Follow the instructions #3 to #11 from second post.
ksubedi said:
3) Click Wipe (Task29) Button.
4) A new window will open. Carefully follow the steps given on the tool. And you will come back to HD2 Toolkit after the tool completes its work.
System Partition Size:
120 MB For AOSP Roms
150 MB For Cyanogenmod/Miui Roms
450 MB For Sense Roms
(These are just average sizes for most roms, if the rom maker has specified a partition size, flash that.)
Click to expand...
Click to collapse
5) Choose cLK Repartition, Choose System Partition Size, Choose Cache Size and press Repartition Button.
6) Press OK on next screen.
7) A new window will open again. Carefully follow the steps given on the tool. And you will come back to HD2 Toolkit after the tool completes its work.
8) You phone will reboot an get stuck on a screen with some text.
9) Choose cLK Install Recovery and press Update.
10) Click yes on next Window.
11) A new command window will open, follow instructions there and you will come back to HD2 Installer after it completes. When your phone reboots, keep holding the home button. Your phone will get into recovery if you do it properly.
.
Click to expand...
Click to collapse
5) Download this file .
6) Choose "mounts and storage" on recovery and choose "USB Mount" after that. Then copy both of those files into your sd card on your computer. Unmount after you finish copying. Press back button on your phone to go back to main screen.
7) Go to "backup and restore" -> restore and choose your backup file and restore.
8) Then install the other file you copied to your sd card. (Credit goes to arif-ali for the file, dont forget to thank him )
9) Reboot, and everything should work like it used to work before.
Hope this helps as well. Have a great day guys.

Ran out of my Thanks quota for the day, but, ksubedi - THANKS!!! I was looking for just this!

ph03n!x said:
Ran out of my Thanks quota for the day, but, ksubedi - THANKS!!! I was looking for just this!
Click to expand...
Click to collapse
excelent , excelent, thx for all.

I've got one question - why it is used 200MB partition when we do "CLK repartition ", and after that 150MB when we do "CLK Install recovery"? And the second part of the question is can we use other system size and what does "Install CLK" button do?

ksubedi said:
!!Warning!! Oops no warnings for this post
I am pretty sure that lot of you are waiting for someone to post a tutorial on how to change from MAGLDR to cLK without losing rom or anything. So here you go.
Changing from MAGLDR to cLK without losing any data.
So, without talking, lets start the job
1) Go to this link and download HD2 Toolkit i made for making easier to download stuff.
2) Extract the zip file to some folder, and open HD2_Installer.exe
3) Power off your phone, and hold power button till you get into MAGLDR menu. Then choose "AD Recovery" and go to recovery. Backup your current rom by going to "backup and restore" -> "backup". Make sure your sd card is not full.
4) Follow the instructions #3 to #11 from second post.
5) Download this file .
6) Choose "mounts and storage" on recovery and choose "USB Mount" after that. Then copy both of those files into your sd card on your computer. Unmount after you finish copying. Press back button on your phone to go back to main screen.
7) Go to "backup and restore" -> restore and choose your backup file and restore.
8) Then install the other file you copied to your sd card. (Credit goes to arif-ali for the file, dont forget to thank him )
9) Reboot, and everything should work like it used to work before.
Hope this helps as well. Have a great day guys.
Click to expand...
Click to collapse
i stuck on step 11) A new command window will open, follow instructions there and you will come back to HD2 Installer after it completes. When your phone reboots, keep holding the home button. Your phone will get into recovery if you do it properly. ( i can't power it off using my phone's power key, then i take the battery off from my phone then plug it back, is it any wrong?

ra6o74 said:
I've got one question - why it is used 200MB partition when we do "CLK repartition ", and after that 150MB when we do "CLK Install recovery"? And the second part of the question is can we use other system size and what does "Install CLK" button do?
Click to expand...
Click to collapse
well , that was an example , you must use system size told by your rom developer.

Option 2 - 3 - 4 are the same?
2) cLK has native android like functions with fastboot.
3) cLK does not show any screen between the kernel and spl (the go go go screen), so it feels more like native android.
4) cLK supports fastboot mode (more native android feel)
Click to expand...
Click to collapse

Step 11 is not working for me, too. The cmd stucks at " <Waiting for device> "!!!
What to do now?

It doesn't work with CoreDroid 1.6 on my HD2.
Perhaps need clk at 390.

hanbam said:
Step 11 is not working for me, too. The cmd stucks at " <Waiting for device> "!!!
What to do now?
Click to expand...
Click to collapse
Hanbam, i had the same problem. I fixed it by installing the Google USB Driver. All instructions and links are here
http://developer.android.com/sdk/win-usb.html
Perhaps something to add to a FAQ?
Greets
Ciss

Tried my luck with CMYLXGO's Stock Desire HD (v1.1.17) (a Sense ROM), and got into the Android boot logo loop. I also tried Tytung R10 ppp update (just a blind shot) instead of the charan_05152011_cLK_ppp_cache.zip file attached in the second post - still no go.

I am using RAFDROID HD 4.0.2! After changing to clk, I can install recovery and do a restore, but when it reboot, it just stuck at the white htc page.

A quick question,what's the file that we download at step 12,what's the use of it? and can i flash my rom in CWM without it?!

It's for improve stability on ppp mode with clk

actually I can make any MAGLDR rom boot by CLK including sense rom, but one problem I cannot solved. that is the wifi not working.
steps are as follows:
1.flash Task 29 with Radio 2.15.50.14
2.flash clk 1.4.0.1
3.flash cLK_Rcovery 3.2.0.0 (size depending on rom's requirement)
4.flash ROM（zip package）
5.flash charan_05152011_cLK_ppp_cache.zip
6.flash Kernel initrd.gz and zImage（take from Zip Rom）
@echo off
echo _______________________________________
echo _______________________________________
echo Please Connect Your Phone,
echo Connect The USB Cable,
echo Power It Off,
echo Hold Windows Button And Power Button Till
echo You Get In The FastBoot Mode,
echo Flashing...
fastboot -c "" -b 0x11800000 flash:raw boot zImage initrd.gz
echo Flashing Complete
fastboot reboot
7.reboot
The Rom success coming into the system.
if i don't flash charan_05152011_cLK_ppp_cache.zip,the wifi works normally,but GPRS or 3g is not working.

thanks, i really appreciate the guide. Its a nice easy to flow for those would count figure it out before.
i prefer clk over magldr. But i still get very frequent data drop outs in areas with low service. magldr has zero issues reconnecting. Clk normally requires a airplane mode or a reset to get service back.

chshrm said:
actually I can make any MAGLDR rom boot by CLK including sense rom, but one problem I cannot solved. that is the wifi not working.
steps are as follows:
1.flash Task 29 with Radio 2.15.50.14
2.flash clk 1.4.0.1
3.flash cLK_Rcovery 3.2.0.0 (size depending on rom's requirement)
4.flash ROM（zip package）
5.flash charan_05152011_cLK_ppp_cache.zip
6.flash Kernel initrd.gz and zImage（take from Zip Rom）
@echo off
echo _______________________________________
echo _______________________________________
echo Please Connect Your Phone,
echo Connect The USB Cable,
echo Power It Off,
echo Hold Windows Button And Power Button Till
echo You Get In The FastBoot Mode,
echo Flashing...
fastboot -c "" -b 0x11800000 flash:raw boot zImage initrd.gz
echo Flashing Complete
fastboot reboot
7.reboot
The Rom success coming into the system.
Click to expand...
Click to collapse
Have you try to chmod 777 the file bcm4329.ko?

john_matrix said:
Have you try to chmod 777 the file bcm4329.ko?
Click to expand...
Click to collapse
i don't know the function of this file, and actually it is included in the patch package.
Situation is that:
if i don't flash charan_05152011_cLK_ppp_cache.zip,the wifi works normally,but GPRS or 3g is not working. if i use this patch, wifi not working, but GPRS or 3g become normal.

how to install FXP124 CM9 on arc?

How to install FXP124 CM9 on arc?
At this time, on my arc these are installed.
baseband 72: LT18i_4.1.B.0.431_(1254-2184).ftf
ARC-DooMKernel-ICS-BETA-v05_boot.img
ARC-DooMKernel-ICS-v05-modules_CWM.zip
LT15i_4.1.B.0.431_Generic.zip
And I try to follow this install guide.
HOW To Install CM9
1- download rom
2- go to recovery and wip data / factory reset
3- clear cache then wip dalvik cache from advanced menu
4- instal rom
5- clear data then reboot then wait for a little while then turn of ur ace
6- go to recovery and clear data and wip cache then wip dalvic cache then install the rom again then clear data and reboot and wait for a moments
7- u got cm9 ics rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1427962
Can this work fine?

For cyanogenmod Roms you need the correct kernel, which is always in the download zip. Extract the zip, use the .img file with fastboot then flash the rom.
sinkster©

sinkster said:
For cyanogenmod Roms you need the correct kernel, which is always in the download zip. Extract the zip, use the .img file with fastboot then flash the rom.
sinkster©
Click to expand...
Click to collapse
Yes it is true, there is the kernel in the zip, what u have to flash with fastboot (or Flashtool) BUT
now - 2012-06-12 10:42 - the boot.img, what is inside the fxp's 124 rom, cannot get into recovery mode - there will be a fix soon -
for now, you can flash the boot.img from the fxp's 123 zip, with that, you can get to recovery , and install the 124 ZIP. after rebooted, you can flash the 124 boot img,
working fine for me . But keep in mind, that you have to copy the 124 version zip to sdcard, before all.
bye

sinkster/ Thanks a lot.

Given the major updates forthcoming in the next fxp125 release, my opinion is you would be better off to hold on for that release.
CHANGELOG
FXP125
CM7.2 RC2
- latest cm 7.2 fixes
CM9.0 RC0
- latest cm 9.0 fixes
- new kernel (2011 devices)
- new camera libs (2011 devices)
- camera preview fix (2011 devices)
- video recorder fix (2011 devices)
- video playback fix (2011 devices)
- new wifi fw (2011 devices)
- GSM/DATA fix(R800x)
- better battery management
As you can see, this update will include camera fixes, as well as better battery management.

[MEGA]Titanium S1,Cherry Flame2.0,KTouch U86 Kiss,Archos 45 Platinum

Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Click to expand...
Click to collapse
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Click to expand...
Click to collapse

Reserved
Flashing Roms and Fix Soft brick
1) Copy Rom to SDCard
2) Boot into Recovery by Powering on while holding power and vol+ Button.Initially you'll see a green screen...Keep holding untill the screen turns red.
3) Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
4) Goto Advanced and format Dalvik Cache
5) Select Apply Zip from SD Card
6) Select zip file of rom to install and wait.
7) Reboot and voila.
Note:This is assuming you are using CWMR
Note: Do not format /SYS_BOOT Partition.You'll end up bricking your device and then will not be able to boot into Fastboot mode.
If this happens by mistake.Follow the next Guide.
Click to expand...
Click to collapse
Fixing RESET FOR ENTRY QPST DOWNLOAD
In case you end up Formatting /SYS_BOOT Partition then you'll most likely end up in this.There might be few other cases when this can happen but none that i am aware of.
If you Have a Linux Desktop
If you have access to Linux PC then connect your mobile to it and mount the partition which is around 50 MB. Download the Images.zip from below.unzip the file and copy the whole folder to the 50 MB partition.
Your File structure should look something like this
-\50MBPartition
-\image
-\AMSS.MBN
-\AMSSHD.MBN​
If you have Windows
http://www.filefactory.com/file/2n5ygdzybijv
I'll soon put up a guide for windows users.
This is the guide I found on facebook's CM Flame 2.0 group.
DISCLAIMER:
This fix worked for me. I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE, YOU DO THIS AT YOUR OWN RISK!!! Please do the process step-by-step. DON'T SKIP any step as I don't know what will happen and there's a possibilty that your phone will be dead permanently.
TOOLS NEEDED:
Roadkill and StockROM
DOWNLOAD STEPS:
1. Go to www.dropbox.com
2. SIGN-IN using MY credentials
E-mail: [email protected]
Password: dropbox-pemaustria
3. Navigate to the folder cmflame2, there you can find the file.
4. Right click cmflame2stock.zipx, and click download.
(THIS STEPS LEAVE ME NO CHOICE BUT TO GIVE MY DROPBOX ACCOUNT TO YOU. AS A RESPECT, PLEASE DO NOT CHANGE ANY ACCOUNTS AND SECURITY SETTINGS ON MY PROFILE. THANK YOU)
NOTE: Please use WinZip for extracting files. Thanks
TUTORIALS:
1. Disconnect all USB drives especially flash drives, including memory cards.
2. Turn on your device to QPST Mode, and connect it to computer. When a window prompt you to format card. CANCEL.
3. Extract the contents of cmflame2stock.zipx and run Roadkill.exe. Click 'Yes' if administrative privilages prompt you.
4. In the left side of 'Write image to' choose PHYSICAL DISK 1(3.61GB). In my case it is 3.61 GB. Your size must be approximately 4GB. CHOOSE THE RIGHT DISK. CHOOSING THE WRONG DISK WILL RESULT DAMAGE to the selected disk.
5. In your extracted folder, you will see an image file named CM-Flame2.0-StockROM.img.
6. On source file, browse for the image file you just extracted.
7. Click 'START', wait for the process until it's finished.
Click to expand...
Click to collapse

Custom ROM's
Stock Rom
Karbonn Titanium S1
Flashable ZIP
CWM Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cherry Mobile Flame 2.0
Flashable ZIP
K-Touch Hornet U86 Kiss
K-Touch 1.3.4 Rom
Archos 45 Platinum
Archos 45 CWM Backup
Click to expand...
Click to collapse
Custom ROMS
LeWa OS 14.05.16
Download
One of the most stable ROMs I've seen for our device.It is Continiuosly developed and supported at Lewatek and has weekly updates at friday.OTA update are available so you don't have to download the whole ROM
MIUI ROM 4.1.17
Highly Customizable ROM.
MIUI Is known for the amount of customization you can do with it.From Statusbar to Lockscreen to everything normal android OS can do.
MIUI ROM Download
Lenovo Magic 4.0
With Support for over 11 Languages and
Download
CM10.1
CM10.1 Base ROM
Update File
CM10.2 Alpha
CM10.2 ROM
CM11 Alpha 3
CM11 ROM
Nokia X ROM Port
This ROM is ported by our friend rdis.
You can find the ROM here
AOSP KitkatFlare
More like Stock ROM with KitKat touch in it.Cooler and more Powerful
This is a KitKat Look alike and not the actual kitkat. For KitKat Check CM11 Above.
AOSP KitKatFlare
IXYNOS
Based on stock
Fully themed with color combination of cyan, yellow, purple and white
Slim rom around 189 Mb
init.d tweaks
build.prop tweaks
ttpod
mifileexplorer
pre rooted
zipaligned
net speed in status bar
good battery life
extremely smooth high performance rom
camera with smile detection
Ixynos ROM
Xperia Z
Xperia Z Download
Click to expand...
Click to collapse

Reserved
Reserved

Thanks idrogon81
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.

sunilneelam said:
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
Click to expand...
Click to collapse
That's strange :/
Didnt work for me

Any Cynogenmod roms
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated

LOLya said:
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
Click to expand...
Click to collapse
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1

TY
idragon81 said:
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
Click to expand...
Click to collapse
If uget it bugfree plz upload it
Thanks

English TWRP
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it

Hi,
Great to read that.. at least after crawling the web and finding that Karbon S5 is equivalent to Archos 50 Platinum.. I find from the specs that this Karbonn S1 is the same as the Archos 45 Platinum that I own.
Specs are : here for the Archos 45..
http://www.archos.com/gb/products/smartphones/platinum/archos_45platinum/specs.html?#a
Finally.. I can't wait to see Cyanogen on it.. maybe a chance to have a CM11 ?
Regards

at last i could successfully port android 4.2.2 to karbonn titanium s1...
the rom is being uploaded...its named as "CHEEKUMOD" as it is edited by me
whats working:
ALMOST EVERYTHING :fingers-crossed:
whats NOT working:
CAMERA FOCUS
REST ALL ITS JUST FINE AND AWESOME !!
see the screen shots mean while

Karbonn Titanium S1 custom rom
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
========================================================================================================
Whats WORKING:
VERSION 1
ALMOST EVERYTHING
VERSION 2
ALMOST EVERYTHING
========================================================================================================
Whats NOT WORKING:
VERSION 1
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
VERSION 2
CAMERA FOCUS
Will give the fix soon,or someone please help me out to fix it...
========================================================================================================
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
VERSION 1:
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
========================================================================================================
DOWNLOAD THE VERSION 2 OF MY ROM HERE WITH MIC FIX AND GAPPS !!
IMPORTANT !!!!!!!!!!!!!!!!!!!!!!! <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DO NOT FLASH GAPPS WITH THIS VERSION OF MY ROM IT IS PRE INSTALLED IN THE ROM...!!
VERSION 2:
ROM DOWNLOAD: https://drive.google.com/file/d/0Bz2-ARVuWcM9SUVkUnJSSnV3WEU/edit?usp=sharing
GAPPS DOWNLOAD: ITS PRE INSTALLED IN THE ROM DO NOT FLASH AGAIN !! < < < < < < < < < < < < < < < < <---------------------NOTE
Changelog:
1:Fixed "Mic not working in call".
2:have added gapps in the rom file to minimize flashing procedure of flashing each at a time.
========================================================================================================
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!

pls..
idragon81 said:
Flashing Roms and Fix Soft brick
Fixing RESET FOR ENTRY QPST DOWNLOAD
Click to expand...
Click to collapse
Pls.. post a guide for windows users.thanks

CWM is the solution
claymisteryo said:
Pls.. post a guide for windows users.thanks
Click to expand...
Click to collapse
Its not necessary to flash or reset the soft brick using any OS,
U can do it by CWM also.
1]For softbrick u can just factory reset and wipe cache
2] for flashing u can mount and remount sdcard and copy the .zip file to it and choose install zip from sdcard

Plz accept my request
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Click to expand...
Click to collapse
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it

LOLya said:
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
Click to expand...
Click to collapse
me too not able to download

Mincrophone not working!!
when you call, the other person cannot hear your voice.... plz fix this!
its quite a major BUG!

Original Site
chetan007cheeku said:
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
Whats WORKING:
ALMOST EVERYTHING
Whats NOT WORKING:
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
Will give the fix soon,or someone please help me out to fix it...
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
Click to expand...
Click to collapse
Actually Cheetan this is the site with the same ROM,no offence.You might have modified much in this ROM(Your ROM(Cheeku ROM))
Site: http://www.needrom.com/mobile/k-touch-u86-7
Problem is u just need to make account

LOLya said:
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Click to expand...
Click to collapse
can i use any twrp version instead?

[UPDATED][TUTORIAL][REDMI 1S]Dual-System Installation in detail!!

First of all i would like to thank ->Tsing Yi qingyi @http://weibo.com/1048297887 for his effort to make this possible!!
As some fellas request....I'm Just giving a detailed guide for the process to have Dual-System{Dual_Boot} in our little dragon @rmani :laugh:
DOWNLOADS:
1.HM1S-Sysrec.zip: http://pan.baidu.com/s/1jGzfP3o
2.M1S-System-Menu1.3-test.zip: http://pan.baidu.com/s/1qWDN5u8
if want it in a simpler way download 3
3.Mokke + Miui.zip: http://pan.baidu.com/s/1sjCyI3z
:good: @bhushan2k
MIRROR Link: https://drive.google.com/folderview...NrYmkzLTN3WmlONEczVnlzajg0emo3ZHM&usp=sharing
WARNING!! : Installation of Dual System is Complecated, include data loss and may brick your devices and i'm not responsible for any kind of Loss or Failure..!!
CAUTION!! : During this Process, Your Phone gets Factory Reset and all internal memory gets wiped!! Make a Backup of all internal data as well as a nandroid to extrnal sd!!
***//For Users coming from MIUI rom and want to have MIUI on one of the Systems continue from step 1-2 and read NOTE and in step 3 tick the checkbox promting special!
STEP1:
Flash HM 1S-Sysrec.zip...[after flashing, recovery gets rebooted].......In this Process Phones Intrernal Memory gets formatted and current ROM gets Factory Reset!
STEP2:
Flash HM 1S-System-Menu1.3-test.zip...Select English->Press Next->Accept and Press Next->Enter the function->Install and uninstall->Install the dual system.....This installs Dual-System and gets rebooted to recovery, meaning dual system got installed!!
**NOTE 1 : If you wish to install mokee+MIUI which was provided #3 in download section.....You can flash that mokee+MIUI.zip here, without proceeding further...and reboot!!
**NOTE 2 : Now we have two System partitions installed and we are on system1, which already have the previous Rom residual and System2 is Void!!
**NOTE 3 : If you want to have a fresh Installation of AOSP Rom on System1, you can directly flash a AOSP rom of your choice! or continue with previous rom!
STEP3:
Now that we have a Rom in System1 [MIUI or a AOSP]....so we need to install system switching software in it....
Flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System I-> Next [check special for MIUI users]...and reboot system!!
STEP4:
After the completion of boot process you will see a system changing app....open the app ->give root permissions and the phone gets rebooted and gets stuck at mi logo indicating we are in System2....Now Enter Reovery (Powr+VolUp same time)
STEP5:
Flash a ROM of your choice...."and dont reboot!"....after flashing rom again flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System 2-> Next....now reboot !!!.. which will take you to ROM installed in System 2 ....
STEP6:
After the completion of boot process, now that you are in System2, will see a system changing app as well ....open the app ->give root permissions and you will be able to switch to the other system/ROM........
////**Manual System switching process: **///
Flash HM 1S-System-Menu1.3-test.zip Follow the prompts to enter the main menu -> enter the function ->System Switching -> and select a System of your choice and proceed and Finally reboot !!!
***///Wanna change rom or try a new ROM keeping the other still///***
Stay on the System on which you want to try a new ROM....Reboot to recovery...
Flash HM 1S-System-Menu-Test1.3.zip and Follow the prompts to enter the main menu -> enter the function ->clear data->
Continuing which will wipes and factory Resets the current Rom....After proceeding further enter RECOVERY....
and Flash the ROM u wanna Try...and repeat #STEP5 and install switching software on new system!!(Hope U Understand)!!!
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
...for further questions comment below...............Give :good: if useful!!!....
Happy Flashing!!!

If anything Goes wrong...How to revert Back ?
Sent From My Redmi

1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app

can we use rom??and can i install custom kernel for both roms??

as9333 said:
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
2.cwm or twrp...u can try philz.. Dunno..
3.We can browse sys2 directories from sys1 & vice versa

how can i restore my data on my first rom? help me plz

chauhansonu104 said:
how can i restore my data on my first rom? help me plz
Click to expand...
Click to collapse
I don't think restoring nandroid data will work... Because....as u can see there are two two folders inside root/data/.......by restoring data from recovery will first wipes current root/data content and writes content from backup....so no dual-system!!! Hope you understand....tell me whether u have installed dual system? If so once see inside root/data /....u will get it!

sathyakaushik4 said:
can we use rom??and can i install custom kernel for both roms??
Click to expand...
Click to collapse
We can install gapps for system1 and system 2 separately....and can install custom kernels as well...!

very good tutorial.. thnx for this.. I tried on my own and couldnt manage.. will try again this time following ur simple steps..

Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app

Great, Thanks for info, will try after my exams, one again Thank You Very Much.

@as9333
i guess we can switch between system 1 & 2 from recovery itself.. just flash the zip and explore through its aroma installer and see theres that option to switch...

as9333 said:
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
Note 1: Two Roms will be installed with two separate system partitions....all u can do things like installing custom add-ons or patches either being on system1 or system 2..use switching software to switch between system partition 1or 2...
Note 2: U can switch to system of ur choice from recovery...by flashing HM1s-system-menu.zip...there u will c an option to switch system...hope u understand if u had read the procedure with a bit of pathence!

Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?

had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ

N-Gavin said:
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
Click to expand...
Click to collapse
Read note2 of the above replied post...ur doubt will be clarified!!

bhushan2k said:
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
Click to expand...
Click to collapse
Mk+miui is not mandatory to download!!!.... Remaining 2 are <30mb...any ways u made it easy ...tnx for mirror!!

internal storage
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?

Hsmetric181 said:
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Click to expand...
Click to collapse
figured it out myself,for everybody else
won't format external sd card
and apps will be installed separately

Maybe some mistakes in step 2. The dev recommended unmount system, data and cache before installed Dual-System (doesn't matter really). Some user may need install it twice to success for unknown factors. And as I know on earlier versions, after you installed Dual-System, both partitions are empty. You need to flash a rom to system 1. But I haven't try v1.3 yet so I don't know if anything changed.
The tutorial seems so long but it's very reasonable to proceed.
1. (unnecessary for the 1st time) recover your phone's status - flash sysrec.zip
2. install the dual-boot system - flash into aroma and choose the option
3. flash a rom to current (1st) system - flash it in recovery
4. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
5. switch to system2 - switch directly in the aroma, or [ boot your phone to use the switcher app (after that plz press vol+ to enter recovery because system2 is empty now)]
6. flash another rom to current (2nd) system - just flash it in recovery, it will be in system2
7. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
now you have dual system installed.
For changing between systems, use the switcher (if installed) or change in the aroma installer.
For replacing a rom, switch to the rom you unwanted, and reboot to recovery and flash the new one.
For clear data, don't use recovery,it will clear both. Use the aroma (change to the system you want to clear data and choose clear current).
For miui user, special for miui is actually for miui 6 because /system/app can't get root permission in miui 6.
For uninstall, do it in aroma and then flash sysrec.zip
@pawanzZ

[ROM]CynogenMod For Xolo Q1010i!

CynogenMod For Xolo Q1010i!
Guess What? The King Of All OS CYNOGEMOD Is Here For Our Os!​----------------------------------------------------------------------------------------------------
DISCLAIMER:YOUR WARRANTY IS NOW VOID!
I AM NOT RESPONSIBLE FOR DEAD SD CARDS!
---------------------------------------------------------------------------------------------------
Things Required To Flash:-
1. Rooted Device
2. Custom Recovery Flashed (Eg:CWM,TWRP,CTR)
3. Patience
4. A Working Brain
Steps To Follow While Flashing It:-​
NOTE:BACKUP EVERYTHING USING ANY BACKUP APPLICATION AND THEN ONLY PROCEED FURTHER AS IT WILL HELP YOU IF YOU WANT TO GO BACK TO YOUR STOCK ROM!
1. First Of All Reboot Your Phone Into Recovery Mode (Usually Done By Pressing Volume Up And Power Up Button )
2. Then Just Go To WIPE FACTORY DATA
3. Then After It Is Complete Go To WIPE CACHE PARTITION
4. Then Go To Advanced>WIPE DALVIK CACHE
5. THE FINAL STEP : Go To Main Menu>INSTALL ZIP FROM SD CARD>THEN LOCATE IT>INSTALL!!
6. Then Just Reboot Your Phone And Have Some Patience As First Boot Takes A Little More Time
7. After Boot EnJoY Your Custom ROM!! ​:fingers-crossed:
Features :-
1. CynogenMod Launcher
2. Apollo Music App Provided
3. Dsp Manager Provided
4. CynogenMod Boot Animation
5. Backup/Reset Function
6. Floatify Notifications! [ Please Make Sure To Enable Them As Well!]
7. Dual Sim Support
8. Stock Camera
9. OTG Usb Support
Bugs:-
Not Yet Present!
HOW TO ROOT ROM:-
After Flashing Rom Boot Up Your Device Once And Then Again Reboot In Recovery Mode And Flash SuperSu.zip!
And Your Phone Is Rooted!
NOTE:- THE ROM IS JELLY BEAN [ANDROID 4.2.2 BASED] BECAUSE IN KITKAT THERE WERE SEVERAL BUGS!
CREDITS:-
CynogenMod Team For Apps,Boot Screen
Team Xolo For Stock Rom
And I Have Done All Other Parts Of Making!
Hope You Like My Work And Do Hit Thanks If You Do !
Stay Tunned For More Posts,Roms!
Downloads:-
Link To Rom :- https://docs.google.com/uc?export=download&confirm=kWx6&id=0B9sCtQAUS6TEanBOSkg3TzEwT2s
Link To SuperSu.zip :- http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip?retrieve_file=1
Link To Custom Recovry : CWM : http://forum.xda-developers.com/q101...overy-t2811159
TWRP: http://forum.xda-developers.com/show....php?t=2746379
:laugh::silly::victory:

screenshots?
Some more screenshot please?

vinayakjain1998 said:
Some more screenshot please?
Click to expand...
Click to collapse
Like What Type Of Screen Shots>?

@Techy said:
Like What Type Of Screen Shots>?
Click to expand...
Click to collapse
Status bar.
Features.
settings.
etc etc.

I don't believe its cm..
proove it..what cm features u have in this rom...