Develop Bugs

New to ADB and have a few questions I can't find the answers to...

Now, I have figured out that I have to actually be in the android-sdk-windows\tools folder for ADB to work, but when I type adb devices it just says List of devices attached but doesn't list my Evo.
I have USB debugging on.
An Android ADB/rooting noob guide would be very helpful right now.

criccio said:
Now, I have figured out that I have to actually be in the android-sdk-windows\tools folder for ADB to work, but when I type adb devices it just says List of devices attached but doesn't list my Evo.
I have USB debugging on.
An Android ADB/rooting noob guide would be very helpful right now.
Click to expand...
Click to collapse
Does it have anything there when you type adb devices? Should come up with a HT and some numbers after it....being your device, EVO.
Actually, there is a step by step Guide for EVO root, and a ADB Guide for Beginners

Your device isn't being recoginized check the driver if u r in windows.

Ok, I managed to figure out the cryptic SDK installer and download the USB driver package to android-sdk-windows\usb_driver. I used Device Manager to install the driver and I pointed it to that folder and I get the "Windows was unable to install your ADB".

Are you already Rooted? as for the Drivers, when I plugged in my EVO via USB, it installed drivers...I also copied the HTC Sync that came on the SDCard w/phone, onto my pc. But I did not have to do anything further.
Can I ask what you are trying to do in adb? and is this for the EVO?

use the cd command to make sure you are in the android sdk tools folder
if you want adb to work
what i do
1. use the cd command to go to the directory where my sdk is located which for example is c:\androidsdk\tools
2. there you go
3. if you want shell make sure your device is connected
"adb shell"
and have htc sync from evo's sd card installed

http://myevo4g.net/main/?p=83
Sent from my HTC EVO

download htc sync and install that. i was having the same problems and apparently the usb drivers that get installed with that app are the ones that worked like a charm for me.

Try
Code:
./adb devices
Instead.

--> try" adb start-server "
If your HTC dont show up, it's usually because the ADB server isnt running. Hope this helps =]

I've rooted a hero before and felt pretty confident with android sdk, usb drivers, etc. After spending an hour trying to get it to work on my win 7 64 bit system, I thought it might save someone some time if I posted what finally allowed me to get adb to work.
My problem was the computer wouldn't recognize the EVO as a device. Even after I installed the usb drivers through android sdk. I tried to manually update them through device manager (pointing it to the usb drivers directory) and still no luck.
As the video linked above showed, the missing piece for me was installing htc sync. use the version that comes on the phone. So connect the phone to the computer, mount it as a drive from the phone menu, then copy over the htc sync directory to your computer, then run it. The version on my phone was 2.031. THEN the computer will recognize it with usb debugging turned on and I'm able to adb to the phone through the command prompt.
Hope that helps someone. Sean

[Q] Help with fastboot driver?

Greetings XDA,
I'm trying to hurry and unlock my One before Verizon locks 'er down tight, but i'm having trouble getting the Fastboot driver installed.
I've installed the java run time environment, sdk, and even the HTC my sync settings (with drivers) and am seeing "My HTC" under Android ADB devices while booted normally, but as soon as I jump to fastboot, the "My HTC" receives an exclamation point and the device driver says not installed.
I'm running Windows 8 x64 and tried these instructions here: http://forum.xda-developers.com/showthread.php?t=2232799
Any help? Any one?

MetroGnome711 said:
Greetings XDA,
I'm trying to hurry and unlock my One before Verizon locks 'er down tight, but i'm having trouble getting the Fastboot driver installed.
I've installed the java run time environment, sdk, and even the HTC my sync settings (with drivers) and am seeing "My HTC" under Android ADB devices while booted normally, but as soon as I jump to fastboot, the "My HTC" receives an exclamation point and the device driver says not installed.
I'm running Windows 8 x64 and tried these instructions here: http://forum.xda-developers.com/showthread.php?t=2232799
Any help? Any one?
Click to expand...
Click to collapse
I had this problem too running windows 8 x64. I think my problem was that I installed the sdk first with google's USB driver and not HTC's driver. What I did to make it work is switch computers over to my wifes which at the time I hadn't installed anything on yet. I went to htcdev.com and went to the part of the site where it is step-by-step on how to unlock the bootloader. I installed the Java Runtime Environment on the link provided on the upper right side of the site, then I installed the HTC sync manager on the link provided as well. I had my phone connected to my computer usb 2.0 (not usb 3.0) the whole time and with USB debugging enabled (not in fastboot mode, but with phone normally on). After that I took the three files from the sdk that htc wants you to place in a separate folder and put them in c:\Android. I did not install anything from sdk this go around.. i just took the three files out and put them in a separate folder as instructed by htc. After that I opened cmd and directed it to the folder I placed the files in (cd c:\Android) and ran command "adb reboot bootlader" Once I did that and hit fastboot the "My HTC" in device manager no longer had an exclamation point. So in summary, I couldn't reverse the drivers from my computer that I installed first so I resorted to using my wife's computer that didn't have anything installed yet. I installed JRE, then HTC sync software, and just used the 3 files HTC wants from sdk and placed them into a separate folder. I didn't install anything from sdk. It all worked after that. I don't have instructions on how to reverse the usb drivers you have already installed because I couldn't figure it out... in fact, I formatted windows on my pc and am reinstalling. Hope this helps.
-eL

Sadly...
eL_777 said:
I had this problem too running windows 8 x64. I think my problem was that I installed the sdk first with google's USB driver and not HTC's driver. What I did to make it work is switch computers over to my wifes which at the time I hadn't installed anything on yet. I went to htcdev.com and went to the part of the site where it is step-by-step on how to unlock the bootloader. I installed the Java Runtime Environment on the link provided on the upper right side of the site, then I installed the HTC sync manager on the link provided as well. I had my phone connected to my computer usb 2.0 (not usb 3.0) the whole time and with USB debugging enabled (not in fastboot mode, but with phone normally on). After that I took the three files from the sdk that htc wants you to place in a separate folder and put them in c:\Android. I did not install anything from sdk this go around.. i just took the three files out and put them in a separate folder as instructed by htc. After that I opened cmd and directed it to the folder I placed the files in (cd c:\Android) and ran command "adb reboot bootlader" Once I did that and hit fastboot the "My HTC" in device manager no longer had an exclamation point. So in summary, I couldn't reverse the drivers from my computer that I installed first so I resorted to using my wife's computer that didn't have anything installed yet. I installed JRE, then HTC sync software, and just used the 3 files HTC wants from sdk and placed them into a separate folder. I didn't install anything from sdk. It all worked after that. I don't have instructions on how to reverse the usb drivers you have already installed because I couldn't figure it out... in fact, I formatted windows on my pc and am reinstalling. Hope this helps.
-eL
Click to expand...
Click to collapse
Sadly, i don't have such a machine lying around. The wife's comp has the sdk installed as well (she's a nexus user). Although, on her windows 7 machine, in fastboot i do see MyHTC driver as ok, but when i run the "fastboot oem get_token_modifier" command, i get "(bootloader) [ERR] Command error!!! OKAY finished"
so something still quite wrong!

I don't think the Fastboot drivers work on Windows 8.
Spent all day trying, and never got recognized in ADB. Used co-worker's computer with Windows 7, worked like a charm.

jadesocket said:
I don't think the Fastboot drivers work on Windows 8.
Spent all day trying, and never got recognized in ADB. Used co-worker's computer with Windows 7, worked like a charm.
Click to expand...
Click to collapse
.... This probably explains my problem as well. Will try on a Windows 7 computer in the morning and report back to see if that was the problem.

jadesocket said:
I don't think the Fastboot drivers work on Windows 8.
Spent all day trying, and never got recognized in ADB. Used co-worker's computer with Windows 7, worked like a charm.
Click to expand...
Click to collapse
ADB and Fastboot both work fine on Windows 8. I had to install the newest 4.3.0.001 drivers to get ADB to recognize my One on my Windows 7 partition, despite having had the most recent behind that. My Windows 8 partition worked like a charm because I had more recently installed the updated drivers on it. It's also possible you were connecting your phone to a USB 3.0 port. ADB/Fastboot is "wonky" over USB 3.0, and if you don't have the correct USB 3.0 drivers, you have no chance at all. Also, you need USB Debugging turned on, which can be done in this version of Android by going to Settings -> About -> Software Information -> More, then tapping on the build number 7 times, unlocking developer options, then going to Settings -> Developer options, and checking USB Debugging.
And all this may be moot for now, as it appears anyone who wasn't previously unlocked won't be able to for a while.

IceDragon59 said:
And all this may be moot for now, as it appears anyone who wasn't previously unlocked won't be able to for a while.
Click to expand...
Click to collapse
I can confirm. I successfully got fastboot to run on OS X, but when I try to send my token via HTCDev, I'm met with error 160: MID not Allowed..

ADB won't work for friends Nexus 7?

My friend downloaded and installed the SDK package, and added the environmental variables. The drivers appear to be installed, but the device won't show up under "ADB devices". He is using Wug's Toolkit and went through all the steps, but ADB still won't recognize his device. Only other thing I can think of is to install PDANet. What do you think? Is it still necessary to download the java development kit?
He is using Windows 7. I remember having driver issues as well, I just can't remember how I fixed it.

[Q] Cannot Unlock Bootloader on Windows 8.1

Hello,
I cannot get the bootloader unlock working on my Win 8.1 laptop by any means. If I try through hasoon2000's toolkit, I get the error that the ADB server did not ACK (whatever that means). If I try using the command line and HTC's official method of getting the TokenID, I get a message that a certain ADB-related dll is not installed. I have installed the USB drivers that come with hasoon2000's toolkit about 4 times now. I installed the Android SDK and even Samsung USB drivers. I'm going to uninstall everything, can someone walk me through the step-by-step to get things working? I've read that USB 3.0 is the problem, but I only have USB 3.0 ports on my laptop.

killfire72 said:
Hello,
I cannot get the bootloader unlock working on my Win 8.1 laptop by any means. If I try through hasoon2000's toolkit, I get the error that the ADB server did not ACK (whatever that means). If I try using the command line and HTC's official method of getting the TokenID, I get a message that a certain ADB-related dll is not installed. I have installed the USB drivers that come with hasoon2000's toolkit about 4 times now. I installed the Android SDK and even Samsung USB drivers. I'm going to uninstall everything, can someone walk me through the step-by-step to get things working? I've read that USB 3.0 is the problem, but I only have USB 3.0 ports on my laptop.
Click to expand...
Click to collapse
Use another computer if you can.

I had similar problems until I used this version of adb
http://www.mediafire.com/download/e5mieo2vxjd71ws/android-tools.zip
Run everything from the downloaded folder.
First of all ensure you have USB DEBUGGING enabled in DEVELOPER OPTIONS in the phone settings.
Open the downloaded folder then right click inside the folder while holding shift then choose 'Open command Windows here'
Plug in the phone using the original HTC usb cable then in the command window type ADB DEVICES. The response should be a device comprised of letters and numbers.
If you don't see any device attached try swapping the cable to another usb port. If you see your device attached then follow the unlock instructions at HTCDEV as its the most reliable way.
If still no device then it could be a usb driver problem. You should here a ding when you plug your phone in.
Make sure the Unlock_code.bin is in the above folder when unlocking.

ashyx said:
Run everything from the downloaded folder.
First of all ensure you have USB DEBUGGING enabled in DEVELOPER OPTIONS in the phone settings.
Open the downloaded folder then right click inside the folder while holding shift then choose 'Open command Windows here'
Plug in the phone using the original HTC usb cable then in the command window type ADB DEVICES. The response should be a device comprised of letters and numbers.
If you don't see any device attached try swapping the cable to another usb port. If you see your device attached then follow the unlock instructions at HTCDEV as its the most reliable way.
If still no device then it could be a usb driver problem. You should here a ding when you plug your phone in.
Make sure the Unlock_code.bin is in the above folder when unlocking.
Click to expand...
Click to collapse
That version of ADB didn't work for me either. Anyway I was able to get fastboot to work but not ADB so I was able to unlock and root and everything through a strange method using only fastboot.
Second question, if I am switching between AOSP roms, say for example CM to PA, can I dirty flash or do I have to reset?

ADB does not work with USB 3.0 ports yet on Windows 8 or 8.1. You have to use it on a USB 2.0 port. I have had best results with Windows 7. Fastboot, however, works just fine on 8.1 and 8

xeron72548 said:
ADB does not work with USB 3.0 ports yet on Windows 8 or 8.1. You have to use it on a USB 2.0 port. I have had best results with Windows 7. Fastboot, however, works just fine on 8.1 and 8
Click to expand...
Click to collapse
Not so, I and others have ADB working fine on USB 3.0 ports.
The problem is Windows 8 driver signing enforcement blocking the install of drivers. You need to go to advanced startup options to disable it.
Download these drivers first and extract: http://www.mediafire.com/download/i3lcm7dwl581518/ADB_Fastboot_Drivers_Win81.zip
Follow these instructions to disable driver signing enforcement: http://www.isunshare.com/windows-8/...gnature-enforcement-in-windows-8-and-8.1.html
Once fully booted go into device manager and you should see a device called 'Android 1.0' with an exclamation mark.
Right click 'Android 1.0' then 'update driver software' then 'Browse my computer for driver software'
Click the 'Browse' button and then browse to the driver folder 'ADB_Fastboot_Drivers_Win81' extracted earlier then click next to install the driver.
You will get a warning about unsigned drivers, just ignore and continue.
The drivers should install and you should see a new entry in device manager called 'Android phone' which means the ADB driver is installed.
ADB should now be working.

Thank you so much for this. Have been wondering for a very long time
Sent from my HTC One_M8 using XDA Free mobile app

It sounds like you've got plenty of technical help already, but I will say that I use ADB perfectly fine on my desktop with Win 8.1 so it's possible. I also use hassoon's toolkit occasionally with no issue.
Before I could get the desktop to recognize the M8 I had to completely uninstall all drivers related to my previous galaxy nexus as well as remove any mention of the device in Window's USBdeview. After a reboot, I just plugged in the M8 and windows automatically installed the necessary M8 drivers. I can then run fastboot and adb from the toolkit.

I ended up uninstalling the MSFT USB 3.0 drivers and use the Intel USB 3.0 drivers instead on my Win8.1 laptop that has only USB 3.0 ports. Works great.

Drivers to allow ADB

Does anyone know where to find official Nokia drivers for this phone so that I can connect to it via ADB? If an official one doesn't exist, are there other options? Thanks!

I have the same problem

When I plug mine Ito the PC, I get an autoplay popup (win 7) for a CD ROM drive. Open the drive and there is a setup.exe that should install the usb driver.
I already have an existing ADB setup on my PC so after doing the driver install the ADB commands work
You will need to set the developer options in setup and set usb debug as well.
HTH

Sooo...I'm a moron. It was the ADB version I was using. I grabbed the latest version of the Android platform tools and everything worked swimmingly.