Develop Bugs

Save conversations with Samsung Wave

Some firmware have the function to record calls.
www .badaforums.net/forums/samsung-wave-forum/save-conversations-with-samsung-wave-t304.html
Badaspain.com's forum user (fjanula) tried to install a Indian firmware and has appeared the option to record calls.
www .badaspain.com/index.php?topic=1326.msg88550#msg88550
Then, user edward2224 found that the key was in the file apps_compressed
www .badaspain.com/index.php?topic=1326.msg98172#msg98172
May be the funtion is installed in the european's firmware but it's disabled.
I hope this information helps solve the mystery.
And sorry for my english level

I dont think that this feature will be available in the official Bada 1.2. Recording calls is illegal in some areas and maybe Samsung will just opt for the easy way out and that is to remove that feature entirely. Maybe some third party developer will create an application for it.
en.wikipedia.org/wiki/Telephone_recording_laws

dude you misunderstood something, phone tapping and call recording are different things. ANd call recording is not illegal...
And i think due do conditional launch function available in sdk 1.2, i think one can make a software which will be launched and recored calls while peoples tries to make a call. So a mod in firmware is really not needed (am i right??)

It is funny but we have this function in russian firmwares. It was previously available in european firmwares, however, it seems that finally this function was removed from EUR.

I think the function really is available in all firmwares (it's more easy to samsung firmware developers) and later maybe is disenable with any parameter.
But some people in the Spanish forum tried to find this parameter without success.
For me it is very comfortable to record calls when I'm driving and I can not write.

LeidenSpain, if it so important for you, you may try russian firmware - it has spanish language as well.

badablog said:
LeidenSpain, if it so important for you, you may try russian firmware - it has spanish language as well.
Click to expand...
Click to collapse
@Badablog if u have share with us ,give link.thanks.

XDAD2010 said:
@Badablog if u have share with us ,give link.thanks.
Click to expand...
Click to collapse
oh guys, so sorry, no spanish - only english and french and others.
the latest one is S8500XEJL2 (bada 1.0.2).
Here is the link: http://narod.ru/disk/2022054001/S8500XEJL2_badablog.ru.7z.html
Here is how to download from the russian filehosting:

¿Is there indian or russian firmware with bada 1.2?

apps_compessed.bin is edited in hex editor so it is so hard to edit right now
you can ask adfree for that function but i can't guarantee that he will make it available

NOW half support for arabic on great FRX06 ..soon full support

hay all want full arabic support,,
soon we will finish develop the full arabic support for our AWESOME version FRX06
we now fix facebook twitter etc but still modify something from lib files to complete arabic in browsers ,,
all that effort doing by DR. AHMED from HD2 thread
wait for us
anyone want our half support tell me
remember :
i mean by support that all letters connected now and change arabic font to good one

Pretty sure Arabic support is already built in to Android 2.x. Go to the Market and install "MoreLocale 2". Run it, and add a Custom Locale.
For the Label, use "Arabic" (or whatever you like). For the Language, press the "ISO639" button and scroll thru to Arabic. (Or just enter "ar"). For the Country, press the "ISO3166" button and scroll to find your country. Leave the Variant blank. Press Add. Done.

Also, this question has nothing to do specifically with FRX06 or even Touch Pro 2. It certainly has nothing to do with Android Development/Porting for the Rhodiums. I believe this thread should be moved to the Questions and Answers forum.
http://forum.xda-developers.com/forumdisplay.php?f=456

highlandsun said:
Pretty sure Arabic support is already built in to Android 2.x. Go to the Market and install "MoreLocale 2". Run it, and add a Custom Locale.
For the Label, use "Arabic" (or whatever you like). For the Language, press the "ISO639" button and scroll thru to Arabic. (Or just enter "ar"). For the Country, press the "ISO3166" button and scroll to find your country. Leave the Variant blank. Press Add. Done.
Click to expand...
Click to collapse
thanks man very much for your helping and for your attention
but i know its supported but as i said letters not connected so its halfly supported
and morelocle 2 do nothing only transfer all system to arabic and i dont want that
i want only to read arabic like opera that i installed before but in all froyo like facebook , twitter
thanks again for your helping
and
sorry for not putted that to question and answer

highlandsun said:
Pretty sure Arabic support is already built in to Android 2.x. Go to the Market and install "MoreLocale 2". Run it, and add a Custom Locale.
For the Label, use "Arabic" (or whatever you like). For the Language, press the "ISO639" button and scroll thru to Arabic. (Or just enter "ar"). For the Country, press the "ISO3166" button and scroll to find your country. Leave the Variant blank. Press Add. Done.
Click to expand...
Click to collapse
engfantom said:
thanks man very much for your helping and for your attention
but i know its supported but as i said letters not connected so its halfly supported
and morelocle 2 do nothing only transfer all system to arabic and i dont want that
i want only to read arabic like opera that i installed before but in all froyo like facebook , twitter
thanks again for your helping
and
sorry for not putted that to question and answer
Click to expand...
Click to collapse
Well then, So the conclusion here, is that (Arabic enabled) option is the required goal. and I think that for twitter, Facebook and whats app applications, something should be handled in "Framework.jar" for Arabic language to appear appropriately, I dam not sure whether there should be any amendments in the library files or not.

hay all want full arabic support,,
soon we will finish develop the full arabic support for our AWESOME version FRX06
we now fix facebook twitter etc but still modify something from lib files to complete arabic in browsers ,,
all that effort doing by DR. AHMED from HD2 thread
wait for us

I'm betting you could find everything you wanted already on http://ardroid.com/

I'm Waiting

[CUSTOM ROM] Indian Bada 1.2 (DDKD1) with Social Hub Premium, Call Recording.........

DISCLAIMER:
I WILL NOT BE HELD RESPONSIBLE IF YOU BRICK YOUR PHONE AFTER FOLLOWING THIS GUIDE. BUT I ASSURE YOU THAT THESE FIRMWARES HAVE BEEN PERSONALLY TESTED BY ME AND WORKS WITHOUT ANY HINDRANCE!!!
COPYRIGHT NOTICE: ;D ;D ;D
If anyone wishes to share my work with other users on other forums, they are free to do so under the condition that they credit me in their post and if possible link to my post here.
Thank You.
***************** THE FIRST MODIFIED INDIAN FIRMWARES ******************
****************************** ENJOY ********************************
A very good afternoon to all fellow wavers!!! ;D ;D ;D I am finally done with my exams and have finished the modification to the Indian bada 1.2 (DDKD1) and bada 1.0.2 (DDJI2). ;D ;D
NOTE: For some features to work, you will have to first flash to the modified DDJI2 and then flash to DDKD1. SO I advice everyone that they flash DDJI2 (1.0.2) first. Thank you for your understanding.
Firmwares Included:
1. Modified DDJI2.
2. Modified DDKD1. Only includes the CSC and PFS files, since they are the ones which were modified. So first you will need to download the actual DDKD1 from here: http://rapidshare.com/files/459305949/DDKD1.rar (THANKS TO ROHIRRIM ) and then replace the CSC and PFS files with the files I am uploading. Sorry for the inconvenience, but my net sucks.
For those who want CALL RECORDING, I am separately uploading two files: apps_compressed.bin and a CSC file. NOTE: If you flash these two files, you will have call recording, but you won't be able to update with kies anymore. Kies will show your firmware as S8500JVKC1/S8500ODDKD1. So the choice is yours. For more detailed explanation on how to get call recording keep reading.
Links to the files:
Modified DDJI2 - http://www.multiupload.com/1P61TNH9U0
Modified DDKD1 - http://www.multiupload.com/GMBM6PPQBY
NOTE: You will need 7-zip to extract files. Its free. You can google for it. Thanks.
CHANGE LOGS:
1. Bada 1.0.2 - DDJI2:-
a. The default browser bookmarks are now editable and can be deleted.
b. Social Hub Premium
c. Max MMS size is now 600 KB.
d. Faster GPS. (Lock within a minute under clear sky. ;D)
e. Now max receiver address for messages is 100. (In original DDJI2 it was 50.)
f. Faster booting. About 10 second faster switch on and about 5 sec faster switch off.
g. The default and only CSC region is India. So no need of pre-configuration worries.
h. Deleted all the pre-installed java apps.
i. Included Utalk java locked app with background running and push notifications.
j. Changed Java heap sizes for better java app performance.
k. Increased media player, music player, recorder and VOICE CALL volumes.
l. Deleted the pre-loaded images except the default theme background image,
m. Flash and ad-blocking is now enabled as default.
n. Improved the Secondary Camera (Front Camera) recording quality and increased it's framerate.
o. Increased the youtube streaming bitrate while on wifi.
j. Includes ASPHALT 5 (v1.1.1)
2. Bada 1.2 - DDKD1
a. All the features of Bada 1.2.
b. Support for Youtube 3d.
c. All the features mentioned in DDJI2.
For Social Hub Premium with bada 1.2:
If you want to enjoy Social Hub Premium on DDKD1, you need to first flash to DDJI2. Or else it won't work.
For Call Recording:
For call recording, you will need to flash to the modified DDJI2 and then the modified DDKD1. After that you will need to flash only the apps_compressed.bin file, link to which I am posting below. BUT AS I SAID EARLIER, if you want call recording, YOU CAN'T UPDATE USING KIES ANYMORE.. Your firmware will now look as: S8500JVKC1/S8500ODDKD1 (INU). This is because the apps_compressed.bn is fro the Turkish firmware. I have also included the Turkish CSC file with Indian pre-configuration. So if you wish you can flash the CSC file too to change your CSC version also to TURKISH one.
Download link:
apps_compressed.bin: http://www.multiupload.com/T7E7ZMRKWU
CSC file: http://www.multiupload.com/JI63RFB4YM
HOW TO FLASH:
Here is a video guide on how to flash, made by an user from this forum: Samsung Wave Flashing Guide
I have also attached a pdf guide to this post. The guide is from samfirmware.com. Remember not to check bootchange in multiloader even though the pdf guide asks you to do so.
WHAT TO DO IF AN ERROR COMES UP DURING FLASHING:
If during flashing, multiloader show an error like "Error: apps write" or "Errror: Rc1 write" or aything else for that matter, do not panic. First thing to do is press port search again and re-download the whole firmware again. If the error shows again, close multiloader, remove your phone from the usb, turn it off and then go back to download mode again. Open multiloader and then connect your phone. Then browse for the firmware files again, press port search and press Download. This time it should work without errors.
WHAT TO DO BEFORE FLASHING:
Before each flash, it is recommended that you do a hard reset. Type in "*2767*3855#" without quotes onto the keypad. Remember to take out the sim card and memory card before doing a hard reset. Also remember to backup all the stuff stored on the phone since the hard reset and flashing process wipes away internal memory.
WHAT TO DO AFTER FLASHING:
After each flash do a hard reset again. After the final flash, followed by a hard reset, do the following:
1. Pre-configuration:
Although the Pre-Configuration is already set to INU, and even though there are no other Pre-Configuration options, it is recommended to do the Pre-config process.
How to proceed:
Type in "*#5239870*#" without quotes. Select Pre-configuration. Type in the following in the password field without quotes: "*#27236*#" an press confirm. You will only see INU and it is already selected but it is better to select it again. NOTE: This process is similar to a hard reset. So remove sim and memory card.
2. Voice quality
Enter *#197328640#
1. Choose "[5] Audio"
2. Choose "[1] CP Config"
3. Choose "[1] RCV Config"
4. Choose "[7] Rx AGC"
5. Set "[0] enable flag" to 0 (both read and write)
Repeat step 3 with 2/3/4 (EAR/SPK/BTH).
3. Battery Callibration:
Type "*#0228#" without quotes. Then charge your phone until the top three parameters are 100%. If charging stops in between, unplug charger and then plug it again. Do this until you get 100% on all three.
4. Camera Update: (VERY RISKY!)
If you want to see the camera improvements I mentioned, please follow his step. But this process is very risky.
Caution: Do this very carefully. Make sure you are not out of battery before you proceed.
1. Enter *#36287#
2. Press 3
3. Wait for 4 minutes!! Do not touch your phone during the update process. Do nothing until it says that update is complete!!!
FOR SOCIAL HUB PREMIUM WITH FACEBOOK AND ICQ:
The default Social Hub premium only supports Yahoo, MSN and Google. If you want facebook and ICQ follow the guide in these two websites:
http://www.bada-blog.de/2011/02/17/anleitung-icq-account-mit-dem-google-talk-account-verknupfen/
http://badanation.de/topic.php?t=3313
NOTE: The websites are in German. So use google translate. If someone from this forum who is a native German and could translate the guide for us, it would be great! ;D ;D
Hope everybody has a great time ;D ;D ;D ;D ;D ;D

d. Faster GPS. (Lock within a minute under clear sky. ;D)
Click to expand...
Click to collapse
how did you do this??
thanks in advance

haha, ...

For faster gps there is some ini file to be editrd
change some adress to supl.google.com
i forgot what those "some" is

kadavil said:
For faster gps there is some ini file to be editrd
change some adress to supl.google.com
i forgot what those "some" is
Click to expand...
Click to collapse
hahahahaha
that change kills gps on bada 1.2
also it doesn't make it that much fast to drop down the time from 7-10 min to 1min
anyway thanks for telling

1. You say you have deleted the pre-loaded images, what about audio files?
2. Does your firmware allow Facebook to update via Samsung Apps for Facebook chat?
3. How about adding Answering Machine to the firmware?

no it doesnt :O
my gps works perfectly after changing those settings, its really fast and very accurate

@ TC can u increase the sms memory because it sux only 1300 sms memory dude

For a faster gps, I edited the ini files to enable auto download, data receive type from 2 to 1, device type to 1 from 3, enabled magnetic sensor and enabled ULTSon. Also there is a gps property in the csc file which you can change to s-gps (simultaneous gps).
And these settings do not harm the gps in anyway and its blazing fast on the Indian firmware at least.

The message memory setting is somewhere deep in the system files which are heavily protected. Most probably they are one of the .so file in the ShpAPP dump.

sinstoic said:
1. You say you have deleted the pre-loaded images, what about audio files?
2. Does your firmware allow Facebook to update via Samsung Apps for Facebook chat?
3. How about adding Answering Machine to the firmware?
Click to expand...
Click to collapse
1. I have deleted the pre-loaded images except for the default theme image. I have also deleted most of the ringtones save a few and also deleted the alert tones which are not used as default by the phone.
2. Yes, the facebook app can be updtaed.
3. I didn't understand what you meant here??

Does this custom rom support launching of spoofed apps from menu...

Some Bada Firmware has answering machine. This saves quite some money by avoiding operator voicemail service.

m90ultimate said:
Does this custom rom support launching of spoofed apps from menu...
Click to expand...
Click to collapse
The DDJI2 (Bada 1.0.2) firmware I posted, does support spoofing from menu. That's because it's an older firmware. However DDKD1 (Bada 1.2) doesn't support spoofing.

GPS+
Hello Astrotom forgive my bad English.
I would like clarification on the GPS function +, if you've made ​​the changes you can make all the FW?
Can you explain how?
In all the firmware I tested the GPS + does not work.
I confirm with you that your firmware when you enable GPS + downloads work data and the 3G icon blinks and turns red?
Then you find the kb downloaded packet data?

DDKD1 carcked games r working?

can u make lockscreen as bada 1.2

did any body experienced JPJH1 middle eat version 1.02.It has buit in ans macine along with call rec. only SHP is not there. Can we extract the app frow th FW n install in ddkd1 or ddjI2.. Thank you for the gr8 work

masterdex said:
Hello Astrotom forgive my bad English.
I would like clarification on the GPS function +, if you've made ​​the changes you can make all the FW?
Can you explain how?
In all the firmware I tested the GPS + does not work.
I confirm with you that your firmware when you enable GPS + downloads work data and the 3G icon blinks and turns red?
Then you find the kb downloaded packet data?
Click to expand...
Click to collapse
Yes. The gps+ setting works for me. The 3G icon turns red and downloads the satellite data valid for 168 hours or so. And once you download that data, you never need to worry about gps locks as long as you are outdoors. You will get a alock within seconds there on. However if you disable location services, the data will have to be downloaded again and it may take a minute or two.

Good
astrotom said:
Yes. The gps+ setting works for me. The 3G icon turns red and downloads the satellite data valid for 168 hours or so. And once you download that data, you never need to worry about gps locks as long as you are outdoors. You will get a alock within seconds there on. However if you disable location services, the data will have to be downloaded again and it may take a minute or two.
Click to expand...
Click to collapse
Thank you for responding.
It would be good that you've done as you communicate to Samsung, because they still were not able to activate the GPS service +.
I do not doubt your words, but I want to be sure before risking overwriting.
I think this is one of the biggest bugs Bada.

2175.2907.8858.13030 New firmware available on navifirm

So someone flashed this new rom? What changes? I translated from china lumia 900's forum, here results.
1 used the State Bank 2175.2905.8858.12480 version as mastering.
The 2. Transplantation Lumia900 latest 2175.2907.8858.13030OEM.
3. Latest FULLUNLOCK V4 unlock procedure.
4. Using latest unlocking supporting software the Root rights management, gravity sensor, XAP deployment, file management, WM Device Center, the search key settings and Quick Start 7 software, and all models have added language to facilitate domestic players to use.
5. Supports XBOX game support IE ​​deploy, support for unlimited XAP deployment of PC.
6. Delete multiple languages, or English only reserved yet.
Other registry optimization, debug mode, the default time zone correction.
If you deploy third-party software requires full unlock permission, be sure to set it as a trusted Root rights management, or it may not work properly, no matter what the time, Root permissions to manage the software, you can not delete, or may some other unknown problems. The first time after the start of the Brush to wait a minute or a the Welcome Message pop-up in use. Remember! ! !
http://translate.google.com/translate?hl=ru&sl=auto&tl=en&u=http%3A%2F%2Fwww.wpxap.com%2Fthread-564190-1-1.html
http://www.wpxap.com/thread-564190-1-1.html

2907 is MX (Mexico?) country variant. Anyway works fine for me, better than 2905. Faster and more stable.

2175.2907.8858.13030
wow that's great! downloading!!!!!!!!!!! :fingers-crossed:

Hi there,
can you tell me what's the difference between 12480 and 13030 firmware?
In my custom rom i used the 12480 because it's the latest offical rom for all countrys...
13030 is only for Mexico?
Any recommendations?

Ok, somebody help me out here. I might be stupid. NaviFirm doesn't show this ROM for me. Is there a downloas link on the chinese web page somewhere that I cannot seem to find?

Even the Mecixo one has all languages in.

Zoom from the Past: Help updating Nokia 6700 Classic

Hi All,
Can anyone give me some pointers updating this classic Nok? [6700-C1]
I have the following files downloaded;
rm470__13.10.mcusw [25,813kb]
rm470__13.10.ppm_mb [5,549kb]
rm470__13.10_ISM_007.image_mb_ae_bronze [23,471kb]
as well as this (Nokia BEST (BB5 Easy Service Tool) by Infinity-Box Team ver 1.51) service tool and the Nokia Care Suite installed
Are there any tutes or step-by-steps [or just general advice?] on how to make sure this goes well? To start, do these look like the right files for Euro / English update 13.10?
Its fairly obvious where to reference the .mcusw and the .ppm_mb - not sure where to choose the .image file or what other options to take from the 'Flashing' menu
Thanks a mill!

Looks like the .image file is selected in CNT1
Was wondering what bronze means and ppm_mb - is that the language file?
This looks like it has what I need http://mobile-sn.org/files/Nokia-6700-Classic-RM-470-product-code-0570877/90816.html?lang=en
For GB + Ireland - but no longer exists

Crap - just spent over an hour searching - seems like all there ever are links to files on Nokia's old site which disappeared when M$ took over.
I bloody hate M$
ヽ(ಠ_ಠ)ノ
Anyone got a mirror server with all the old Nok stuff?

Here is 13.1 in the following 3 files;
rm470__13.10.mcusw
rm470__13.10.ppm_sp
rm470__13.10_ISM_020.image_sp_silver
So sp=Spanish [but you can select English and other EU langs later] and silver=theme highlights that shipped with the silver/chrome version.
I flashed this using Best and it went ok only for one annoying point. I found out that after v10.5 they changed the mail client and you can no longer manually enter your mail providers exact details. So, if the auto stuff fails - you fail too because you cannot enter settings yourself. This sucks big time. How to overwrite an individual app on S40?
If you dont need to do email then this is probably a reasonable upgrade from v7.6
Here are files: https://1drv.ms/u/s!AppjETAtk8PvcVXWaN3aeH4fDzE

This may also be useful?
http://mobilestore786.blogspot.co.uk/2014/12/all-nokia-latest-flash-files.html