Develop Bugs

Desire isn't being found with HTC Sync after flash

Reposting here because I think I initially posted it in the wrong section:
Afternoon all,
I debranded my desire using an RUU flashing it to 1.15.405.4 but now HTC Sync isn't recognizing the phone, it is just coming up as 'Disconnected' yet it is still being recognized as a removable disk when in disk drive mode so it can't be a USB brick.
I can't get ADB working either since the phone isn't being recognized so it isn't installing the required ADB drivers for the phone. I can't go back to my stock firmware either because USB Debugging has to be installed correctly for the RUU to run. I had no problems initially, but after upgrading to this ROM I have seemed to have this problems.
I want to root, but if I can't have access to the ADB a root would not be possible? Please correct me if I'm wrong.
Any advice?
Thanks

[Q] wildfire cannot downgrade to create s-off

Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps

wattamega said:
Hello hoping someone can help, I'm a noob have not had much success in rooting yet...
Have a wildfire (Australian Telstra 3G)
Trying to downgrade firmware from HBOOT 1.01.0002 to 1.010001 so i can get s-off.
I'm following the instructions posted in http://forum.xda-developers.com/showthread.php?t=1132028
I've downloaded htc drivers (and uninstalled htc sync)as per instructions
Also loaded android drivers via device manager (screen dump attatched)
I can "talk" to my SD card OK with windows explorer but i don't think I am "talking to my phone or card via adb and the command prompt"
Got the full SDK package installed.
All the obvious things.. Andrtoid debugging enabled / Charge only
So When I attempt to run Step 1 bat I get the following error message:adb server is out of date..killing..*daemon server started successfully... error device not found..(screen dump attatched)
also i tried to make a "goldcard" and extract the serial no of the sd card on the phone. . same deal.. as soon as i get into adb ....error. device not found
note i am using windows 7.
my theory is that i'm don't have a propper usb link when i go into the dos cammand prompt/adb but i have loaded the drivers. I think this is happening when i try to root other phones also (eg zte blade)
can anyone help me. be kind to me I'm a noob...I've attatched three relevant screen dumps
Click to expand...
Click to collapse
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)

no usb comms when in command prompt / adb
eventcom said:
you might want to have a look at this alternative thread: http://forum.xda-developers.com/showthread.php?p=19746165
Swyped from my HTC Wildfire (Buzz)
Click to expand...
Click to collapse
--------------------
Thanks eventcom, but I've followed that link and numrerous others and they all follow the same theme.
here is the problem as I see it...
1/I have installed the android driver when in hboot and it works ok as per attatched image
2/ I have installed htc_sync_setup 3.2.20.exe which is the latest driver availiable from the htc website.I then uninstall HTC sync, which leaves HTC driver installer & HTC BMP USB driver remaining as installed ( as per instructions)
3/ I have uninstalled any other USB programs which might conflict including Itunes and ascociated garbage (no i didn't put it there my kids did!).
USB debugging is turned on & when i plug in USB i go charge only (as per instructions)
Here's a hint...
When I execute an adb commandwithin command prompt eg [adb devices] i get no devices. When I issue a adb copy command I get the result "device not found" I'm know i'm going nowhere on this until I can get device to properly talk via adb and this is the assistance that i am seeking
further info.
I've tried this procedure on another (winxp) machine with same results.
Ive tried this procedure on another wildfire "s" (that is already rooted) same results
I've temporarily disabled the AVG 2012 virus protection & firewall.
As well as being in the directory that the file adb.exe exists I have also installed SDK so adb appears to run in any directory (please explain ?)
If i plug in usb and go "mount sd card" I can access the sd card on the phone viawindows explorer . in my mind this tells me that I have correct usb driver working.
I've tried a different usb cable AND a different phone
before I uninstalled htc sync i tried it out. it doesn't work and the phone won't sync up to this program ( it rarely works this program, tried it on numerous pc with different htc devices and more often than not it doesn't work)
I'm hoping that someone who is experienced in adb can help me get the phone talking with my pc, keeping in mind that I've done almost everything that I can think of to get my phone to "talk: via usb cable and issue commands. If I can't get my phone to communicate via adb then there is no way I can get past step one
please help me

wattamega said:
--------------------
please help me
Click to expand...
Click to collapse
i shall do my very best
ok so what system are you currently running? (win7,vista,xp ect)
are you using the stock usb cable that came with the phone?
when you connect the device to the pc with usb debugging turned on do you get the usb debugging notification in your status bar on the phone?
when you plug your device into the pc with debugging enabled what does your device manager recognize it as? mine shows up as attached...
did your antivirus flag up when you were installing the skd or downloading the adb.exe?

Success with debranding but problems with Revolutionary recovery
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...

wattamega said:
Thank you heavy_metal_man.
I finally solved the USB driver issue. I ended up completely uninstalling HTC driver installer & HTC BMP USB driver. I then installed HTCDriver3.00.007.exe as a stand alone only. Finally I got it to recognise in device manager.
Important lesson learned. Installing the latest HTC driver off the website which is htc_sync_setup_3.2.20 (which installs 3 modules HTC Sync, HTC driver installer & HTC BMP USB driver) then uninstalling HTC sync did not work for me...I now just have HTC driver installer only.
I asked to install clockwork mod during the revolutionary process, but I suspect it didn't work
Anyway I have now succesfully debranded and "sort of" have root. my Hboot screen now looks like this...
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP -0622
TOUCH PANEL - ATMEL224_16ab
RADIO-3.35.20.10
Nov 17 2010 12:08:53
Problem is when I go into recovery I get the "revolutionary CWM V4.0.1.4" Menu... So far so good.however When I select any item EG bacup & restore, intead of going to the next level menu it just goes to a revolutionary screen with no menu and just hangs. pressing the power button takes me back a level but the vol+ vol- buttons do nothing as there is no menu to select from.
So i can't flash with this current screen. the only way I can get out of it is to remove the battery as the reboot & power off menu items do not work.
.
I have tried re-running the revolutionary Exe file again. It prompts me if i would liketo install CWM and I say yes . It says it's done and takes me into Fastboot USB where I can reboot. but CWM ( The wierd revolutionary model) DOES not work like the CWM that i am accustomed to...
So i STILL can't flash CM7...but I'm getting closer...
Click to expand...
Click to collapse
That's ok , power is meant to do that, its the back button you need to use the trackball to select stuff also if I remember correctly that recovery has an issue where it will not charge the phone when it is turned off, so I would update that asap I shall give you a link when I'm out of bed, but for the mean time, backup, wipe everything and install cm7+ gapps
ok here is the most up tp date cwm recovery for the buzz as far as i know. and here is the thread it came from something to note, when you jump up tp gingerbread the type of recovery changes as well, so, the new one will not flash sense roms unless the rom has been designed for the new edify type recovery. not sure how many support this though. also the new recovery will NOT flash radios. it does not play well with others but you can always downgrade your recovery temporarily if you need to, or use the rom manager app (which ic an app interface for the recovery) to flash what you need
Sent from my HTC Sensation using xda premium

Success at last
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.

wattamega said:
Thanks Heavy_metal_man
Success I now have CM 7.2.0- buzz. I also installed google apps ok.
I guess I shouldv'e read the instructions on flashing a bit closer. I've also got a wildfire "s" as well and it uses the power button to enter so I suppose I just assumed...Truth is that I've only just got this phone last week and I didn't even realise that it had a trackball button ...
This is my first ever root/flash that I have done and I have learned alot from the experience. I specifically got this phone ($10 on ebay) so I coul;d learn to do this without the risk of damaging my own phone. This phone had "issues" when I bought it which is why i got it so cheap. now I have upgraded to CM7 it the issues (eg wireless hotspot would not remain on) have gone.
Soon I hope to have the experience and courage to flash my own phone and my kids phones.
Thanks to H_M_M and all of the XDA forum for helping me out.
Click to expand...
Click to collapse
no problem man glad your all kitted out!
wow that cheap this phone cost me £140 when i bought it!!! ( a few years ago) man i got ripped off.... still glad to hear you got sorted out you should always read everything you can carefully before you go flashing your phones
also, just so you know, this wildfire is code named BUZZ and your wildfire s is code named MARVEL just to avoid confusion of course if you need any help with the marvel just let me know. i imagine you've been over to the marvel forum ect but if you get lost pm me. i have experience with that phone as well aside from the name they are completely different, and the marvel does not have s-off yet :/ not by software anyway so everything is different to do :/ still i am rambling now glad your sorted mate :good:

Device not detected in ADB, unable to boot into recovery

Hey guys,
So, I tried to turn my T-Mobile into a GPE. Everything went OK, pushed the RUU - and it hanged for a long time, so I quit out. Tried pushing it again, ADB not detecting the phone anymore - reinstalled drivers, rebooted everything - phone detected on pc as "My HTC", still no device detected in ADB. Rebooting the phone leads to the white HTC screen, booting into bootloader works but it's black for some reason, and I'm unable to boot into recovery - The OS text is red and reads "OS-3.32.531.2 (2.12.1700.1)". I've been trying to look for a solution for the past couple of hours but all the solutions require ADB to work, and all the solutions to get ADB to work are not solving it, so at this point I'm kinda stuck.
Any and all help would be appreciated greatly.
Thanks in advance!

I don't know if there's a t-mobile ruu available but if so, you can try and run that. I would simulate the battery pull first and then see if it recognizes it. From what you described for your os, mine would show that during the process of upgrading firmware

There is a T-mobile ruu in T-mobile one m8 general

Is it possible to run an RUU when the PC doesn't recognize the device properly?

Salabrin said:
Is it possible to run an RUU when the PC doesn't recognize the device properly?
Click to expand...
Click to collapse
Nope. It uses adb/fastboot.
Try uninstalling all HTC Sync and HTC drivers. Then plug the phone, go to Device Manager, find the device and select the option to manually select a driver, then pick Generic MTP Android Device (or something like that).
Also, bootloader screen on GPE is supposed to be black.

So I ran an RUU, it gives me an image error - I changed the CID earlier to install GPE, is that what might be causing the issue? If so, is there a way to change the CID without adb(Still can't get it to detect the phone)?

[Q] Issue with installing mod/adb/SDcard/drivers

Hi folks,
I previously managed to get Cyanagenmod installed on my HTC One X but since made a mess of it trying to get a stock ROM on there (to unlock my SIM). I have since given up on getting a stock ROM back on there and am now trying to get Cyanogenmod back on there, but I have hit some problems.
I have CWM on there and my PC can see the phone in Fastboot, but not via ADB (which I am trying to use to 'push' the ROM on there so I can install it). My PC (Win 8.1) is giving me a "device descriptor request failed" when connecting to USB when on the boot menu, and is showing up just as "One" in device manager when I load CWM. However neither of these situations are allowing my computer or ADB to recognise the SD card.
I have tried 'mounting' it in CWM, updating drivers through device manager, installing Sync (and uninstalling/reinstalling it), installing HTCDriver_4.10.0.001.msi all to no avail.
Does anyone have any advice to get my PC to recognise my phone or otherwise get a customer ROM installed (if there is another way.)
Thanks in advance all.

Bglamb said:
Hi folks,
I previously managed to get Cyanagenmod installed on my HTC One X but since made a mess of it trying to get a stock ROM on there (to unlock my SIM). I have since given up on getting a stock ROM back on there and am now trying to get Cyanogenmod back on there, but I have hit some problems.
I have CWM on there and my PC can see the phone in Fastboot, but not via ADB (which I am trying to use to 'push' the ROM on there so I can install it). My PC (Win 8.1) is giving me a "device descriptor request failed" when connecting to USB when on the boot menu, and is showing up just as "One" in device manager when I load CWM. However neither of these situations are allowing my computer or ADB to recognise the SD card.
I have tried 'mounting' it in CWM, updating drivers through device manager, installing Sync (and uninstalling/reinstalling it), installing HTCDriver_4.10.0.001.msi all to no avail.
Does anyone have any advice to get my PC to recognise my phone or otherwise get a customer ROM installed (if there is another way.)
Thanks in advance all.
Click to expand...
Click to collapse
Flash Philz 5.15.9 recovery use it to mount sd card then to copy the rom you need then flash recovery for your rom for CM12 is one for CM11 is other and for Sense is third. For sense rom you can use Philz 5.15.9. And for the new layout is fourt recovery

Thanks!
I couldn't find it so I downloaded a newer version, but it didn't work, so I looked for longer and found a version, but that wouldn't even boot. In the end I used openrecovery-twrp-2.1.7, which did let me mount the SD and install the ROM.
Then I got stuck on the loading screen, but I discovered I needed to just flash a boot.img (which wasn't in either of the guides I was following, for some reason?!) and now I'm all up and running.
Thank you kind sir!

Soft Bricked (?) during conversion from GPe to Sense

Pretty screwed at the moment. I tried converting my M8 from GPe back to Sense, but somewhere along the lines I messed up, and now my PC can't find it through adb commands.
Phone has no OS on it for me to enable USB Debugging. It's got stock recovery with nothing on the internal or SD for me to flash, and since I can't get my PC to find it, I can't flash a custom recovery for any backups either.
I've tried un/reinstalling HTC drivers, Universal drivers, and some PDA drivers that was suggested elsewhere, and still no luck.
Any suggestions on what I'm missing or what I might be able to try here?

Fastboot (not adb) is more important to you at this point.
Connect the phone in bootloader-fastboot mode. Any response to the command:
fastboot devices
(should return your device serial number - don't post it here).
If so, flash the Sense firmware, then run the desire Sense RUU.