SGP Ultra Oleophobic Screen Protector - Galaxy S II Accessories

Avoid this screen protector, it's supposedly makes the screen oil free, or at least oil-resistant. It does neither. It's just like any other screen protector. I was using the SGP crystal clear, which actually looks better for some reason, and was practically the same item.
I wouldn't recommend buying this screen protector for it's "oil-resistant" properties. It got scratched a little already while I was squeezing the bubbles out.
Good thing about this is, the protector is washable. I literally washed my Crystal clear protector with soap and water, and it went back on perfectly.

Sepharite said:
Avoid this screen protector, it's supposedly makes the screen oil free, or at least oil-resistant. It does neither. It's just like any other screen protector. I was using the SGP crystal clear, which actually looks better for some reason, and was practically the same item.
I wouldn't recommend buying this screen protector for it's "oil-resistant" properties. It got scratched a little already while I was squeezing the bubbles out.
Good thing about this is, the protector is washable. I literally washed my Crystal clear protector with soap and water, and it went back on perfectly.
Click to expand...
Click to collapse
I've used this before switching to ultra optics. The oleophobic coating works pretty darn well initially but it did wear off much sooner than desired.

How's Ultra Optics? I've used Matte protectors before and they tend to pixelate the screen a little with the rainbow effect. Is it the same thing?
Maybe the coating already worn out. It's been a day lol. But the phone's always in my sweaty pockets.

Related

Best screen protector for Swyping?

While I do like Swyping, I find that it becomes difficult as one's hands get a tiny bit sweaty or even dirty. You fingers seem to stick to the screen which makes Swyping fairly difficult and almost impossible to be accurate. While I do try to be as clean as possible, sometimes your hands get sweaty for whatever reasons such as if you wear gloves or keep them in your pockets for a while.
I am just wondering if there is a screen protector out there that allows for a totally smooth surface, despite any sweat, dirt or other things that could be on your fingers? I recently got the Realooks and while they are very clear and does a good job resembling the feeling of the bare screen, it has the same issues while Swyping. There may even be a little bit more of a finger resistance with the Realooks on.
I was thinking and thought that maybe a screen protector with a matte finish would be ideal for Swyping. Matte screen protectors are smooth and most are anti-fingerprint which I assume would be very good for Swyping.
Has anyone had any experience with a matte finish screen protector while Swyping?
Any suggestions overall?
i use an anti-glare screen protector from Clarivue (.com) that is matte finish and has a very smooth surface that makes using swype very comfortable and easy. I used clarivue on my N1 as well when i had swype, and i recently got the captivate and i couldnt live without the smooth surface from the screen protector so i had to buy another pack. it is anti scratch and anti smudge, although from what ive seen, it does affect the clarity of the amoled to a certain extent.
I use whatever screen protector that my AT&T store sold - works well with swype.
i have something similar to the invisashield body shield but i cant remember who made mine. i ordered off ebay an in came in an envelope with no branding. like someone with a laser etcher/cutter got a hold of the material and made it in his garage. it has the typical invisishield orange peel look but feels like it has natural oils in it. it is always very slick and doesn't show finger prints. it never feels greasy or sticky or dry. just slightly oily but i have heard that's not typical of the invisishield brand so it might not be the same material. if i come across the add ill post it.
also antiglare protectors are good for that but the ones i bought had bad adhesive on the edges, also i find that anti glare have a good amount of reflection to them and are only better than hard plastic protectors that can be milky, i can read through an invisishield in sunlight better than an anti glare and no screen protector at all is better than that.
Skinomi...I dig it.
kegobeer said:
I use whatever screen protector that my AT&T store sold - works well with swype.
Click to expand...
Click to collapse
Agreed.
Plus these screen protectors cover the entire front of the phone. Can't even tell it's on there. I've seen others that only cover the display area.
Shovelhead84 said:
Skinomi...I dig it.
Click to expand...
Click to collapse
+1
Dm
Needmorechar
EpicEric said:
Agreed.
Plus these screen protectors cover the entire front of the phone. Can't even tell it's on there. I've seen others that only cover the display area.
Click to expand...
Click to collapse
+1
For $10 and you can go buy them locally, it was ideal. Seems to work just as well as without the protector.
Gorilla glass with no screen protector.
Sent from my GT-I9000 using XDA App

Which screen protector is the easiest to wipe off finger oil?

Hello guys,
I've tried the SGP plastic screens, the SGP Glas, as well as a few generic screen protectors.
I have been using the Glas for the longest time, very happy with it until dust seeped in beneath the Glas, and it bothered me so much that I took it off today. The Glas was great because it was easy to wipe of the oils, one or two wipes with my shirt or pants (trousers) and my Glas is free of smudges.
Now that I have put a plastic screen protector on, I find it very hard to remove the oil smudges even after multiple wipes with a cotton fabric.
Just wondering if you guys have any suggestions, thank you!
even i am looking for something like this. Please suggest me a great screen protector!
tiny hint: microfiber cloth
I find the SGP Ultra Optics protector to be fairly good. There's a 99.9% reduction in finger print residue. I may clean it once every day or two with a lens cloth vs. many times daily with a naked screen. It looks and feels good.
I've used both Zagg Invisible shield and and IShieldz as well. These are both wet installs however. The Zagg was thicker and had texture, not unlike the appearance of brushed stainless steel, lots of parallel "scratches". I used this for a week before my first SGSII died. I wouldn't recommend the Zagg.
The Ishieldz was much smoother, thinner, looked better, and felt better. Alas my imperfect install got the better of me so I peeled it off. Not a fan of wet installs and these are more expensive than other options and they don't bring that much more to the table for the cost/hassle. If you don't mind a wet install, this is a good one.
Does the SGP Glas not form a perfect seal around its edge?
Thanks for the input! I have used invisble shield on non touch screen devices, which worked okay, not a huge fan of the texture, and how lint will collect around the edges and the screen turns yellow after a while.
The glas is completely sealed, I thought it was stuck on pretty well, but three months into using it, dust started showing by the masses. So perhaps egg e glue have out, and dust got inside. I liked the glas, but won't buy another because if this.
I think I will buy the sgp optics, cheaper and everyone says it is good. Thanks!
I do have a micro fibre cloth, but I don't want to have to carry it everywhere. The great thing about the glas was that smudges were super easy to wipe off, and the screen had more clarity because of that. Basically, everytime I put the phone in my pocket, the pocket fabric cleans the screen. Pretty cool.
Sent from my GT-I9100 using XDA App
Copter display protection
It's a ***** to "assemble" nicely (like all other flimsy protectors), but it's easy to keep clean.
You can even wipe away smears with your fingers!!
Give it a try!
// Ohamn
3M Estoc+ is nice
http://forum.xda-developers.com/showthread.php?t=1233748
I think gs2 without screen protector is what we need .its perfect n its girilla glass .you wont scrach it
Matte screen protectors are in general easy to wipe oil off of. I'm currently using Power Support Matte and all that's needed is a few swipes of a microfiber cloth and the screen is grimeless again. 3M Estoc+ is pretty good too, from what I've heard!
notoriouspk said:
I think gs2 without screen protector is what we need .its perfect n its girilla glass .you wont scrach it
Click to expand...
Click to collapse
I use a screen protector to keep my greasy paw prints off. As mentioned above a matte protector is ideal for this. I agree that a freshly cleaned screen without a protector looks best UNTIL you touch it.
Sent from my GT-I9100 using XDA App
The SGP oleophobic screen protector is a good one! I've used it on all my phones, still waiting for mine to arrive for my SGS2!!!
kodath said:
The SGP oleophobic screen protector is a good one! I've used it on all my phones, still waiting for mine to arrive for my SGS2!!!
Click to expand...
Click to collapse
I used it for a while and then removed it after a few weeks. The coating doesn't last long. Markings get more and more difficult to wipe off after some usage.
is there any kind of greace-resistant polishes or sprays for screen protectors? miss my fingerprint free screen that i had before putting on the protector...
steemool said:
is there any kind of greace-resistant polishes or sprays for screen protectors? miss my fingerprint free screen that i had before putting on the protector...
Click to expand...
Click to collapse
Rain-X is a popular solution on just the bare glass.

So far no luck finding a good screen protector. Suggestions?

I'm not sure about the rest of you, but for now it seems like we can't get a good screen protector for the S3. All the flexible film based protectors dent too easy. This includes protectors like the SGP Curved Crystal. This review below clearly shows what I mean about easily denting. It also has issues with tight fitting cases.
Then if we go for a screen protector that doesn't dent so easy, they end up not covering enough of the screen. The SPG Ultra Clear nano and Ultra Crystal (2nd version) both don't dent like the Curved Crystal, but they don't cover enough of the screen. Especially the sides. So swiping near the edges you can easily feel the ridge. Ruins the smooth experience of the S3. Would be nice if Spiegen does a revision of the Curved Crystal like they did with the Ultra Crystal and made it so it didn't dent so easily. I definitely don't want to go with tempered glass as its just too thick. I am currently using a Realook Flex Film, and it covers the whole screen nicely, but has orange peal and dents easy just like the other flexible films out there. Realook now has a "3D forming crystal clear" protector. It covers the whole screen and uses their PET material for the main part of the screen, which should prevent the denting effect. I'll give this one a try, if it's not that great, I may just use no protector and go with a flip case. Anyone else have any suggestions.
Here's a pic of what I mean with not covering the whole screen for the Spigen SGP screen protectors.
This is what I just bought.. not sure when it's going to arrive but it should fit your criteria better?
http://www.ebay.com/itm/261072327014?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Ignore that link. I just recieved it and it doesn't cover the whole screen completely.
Search for the threads. There has been plenty of this
Sent from my SGH-T999
Xcor3 said:
Search for the threads. There has been plenty of this
Sent from my SGH-T999
Click to expand...
Click to collapse
To be honest, I've searched far and wide through the threads and Spigen seems to be the protector of choice. But once I look at reviews of those protectors elsewhere (like the YouTube video I posted) I end up seeing that they're not that great. I'm beginning to think that we have to go with either the flip cover protector or go with a hard film protector that doesn't cover the whole screen in order to get that glass like experience. All the soft film based protectors just dent to easy or have some orange peel effect. It just ruins the beautiful display of the S3.
Tempott said:
I'm not sure about the rest of you, but for now it seems like we can't get a good screen protector for the S3. All the flexible film based protectors dent too easy. This includes protectors like the SGP Curved Crystal. This review below clearly shows what I mean about easily denting. It also has issues with tight fitting cases.
Then if we go for a screen protector that doesn't dent so easy, they end up not covering enough of the screen. The SPG Ultra Clear nano and Ultra Crystal (2nd version) both don't dent like the Curved Crystal, but they don't cover enough of the screen. Especially the sides. So swiping near the edges you can easily feel the ridge. Ruins the smooth experience of the S3. Would be nice if Spiegen does a revision of the Curved Crystal like they did with the Ultra Crystal and made it so it didn't dent so easily. I definitely don't want to go with tempered glass as its just too thick. I am currently using a Realook Flex Film, and it covers the whole screen nicely, but has orange peal and dents easy just like the other flexible films out there. Realook now has a "3D forming crystal clear" protector. It covers the whole screen and uses their PET material for the main part of the screen, which should prevent the denting effect. I'll give this one a try, if it's not that great, I may just use no protector and go with a flip case. Anyone else have any suggestions.
Here's a pic of what I mean with not covering the whole screen for the Spigen SGP screen protectors.
Click to expand...
Click to collapse
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
I use the screen protector that came with my otterbox case and it has served me well so far. It doesn't cover the whole screen but then again, if it did it would come off when I used a case.
werked said:
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
Click to expand...
Click to collapse
I use the genuine Samsung Super Slim case which I feel gives the scratch protection I need for the back and sides of the phone, while adding practically no bulk to the phone. So an edge to edge screen protector would have no issues for me. If only Spigen would use the same material they use for the Ultra Nano or Ultra Crystal in their Curved Crystal protector it would be perfect. It's really too bad the Curved Crystal dents/creases so easily as shows in the above video.
I like what zagg did for the iPhone. They make a case friendly screen protector. I like having that option. If you plan to use a case then it's a perfect choice. If going to use no case or a snap on case then a regular screen protector suits just fine. It would be nice for companies to show android some love in this respect of options.
werked said:
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
Click to expand...
Click to collapse
you can pick up the SGP Flex HD. They cover the entire screen, and is hard to see that it is actually there. It feels smooth as well. Also it doesn't leave much finger prints on there
It seems you haven't looked hard enough, I have a thread on a skinplayer 3D mask film, 99.5% full coverage and has a self healing surface, flexible PET screen protector.
I use the zagg invisishield. Best one I've used yet. I also use it on my tablet. It's more expensive, but worth it. Of course I got mine from best buy the second day the phone was out. So there were only two to choose from ,and I didn't want to wait for one to be shipped to me.
It's designed to fill itself in for minor dents and scratches (I possibly butchered that explanation, but I think you understand). Also, it can be removed and reapplied.
The best part though, is that it's so clear it doesn't detract from the screen. In the past when I would use a screen protector it would always look like a filter was on my screen. Hated it. They've come a long ways in that aspect.
Sent from my SPH-L710 using xda app-developers app
I noticed nobody mentioned Wrapsol. Their ultra line is pretty tough. It comes with a back protector too.
adamdavidson said:
I noticed nobody mentioned Wrapsol. Their ultra line is pretty tough. It comes with a back protector too.
Click to expand...
Click to collapse
not 100% coverage, but excellent quality.
I hate when people ask about screen protectors because that means they obviously don't know about the best one out there. It is called clear-coat. Google it. Ive had it on all my phones. It is perfect. It doesn't come off unless you peel it off and leaves no residue behind. Most malls have a station that sells it and puts it on for you. If you watch videos of it you will see a guy scratching his iphone against rock and then peeling it off and no marks on the screen. Best way to go by far. It is also covered by a lifetime guarantee.
Skinomi - - - - very nice!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Seidio
Sent from my HTC EVO 4G ELTE using Tapatalk 2
Can't believe no one said real look screen protectors.
Sent from my JellyBean Galaxys3
Vikuiti!
I'm currently using Vikuiti screen protectors, and they're working out pretty well. It attracts fingerprints a bit, but nothing a quick wipe doesn't get rid of~
I'm not really so sure why everyone is so worried about the very edges of the screen that the Ultra Nano doesn't cover. It's a great protector that you can barely even tell is there, and it covers all of the important and useful parts of the screen just fine. I've been using it for 2 months and it still looks great, plus I've had no issues at all with scratches on the edges that aren't covered. Using it with a Diztronic TPU case. Put a case on your phone and the combination seems perfect to me.
I've been using vikuiti ( a less mentioned brand for screen protectors I think) and it's been working perfectly fine with the genuine galaxy s3 clear TPU case. No scratches on the phone or screen protector, I never really understood how people had to cycle through so many screen protectors. Best of luck to you finding your preferred sp!

100% full coverage screen protecto

is there such thing aside from the spigen curved one? i heard the spigen ones are garbage. i've used skinomi (they were all right, not as durable), they covered 95% of the screen. the zagg invisible shields were garbage, wasted 25$ and thought it covers the whole screen but it left a huge gap.
Try Tippin Screen protector.
tippin is where its at for full curved protectors.. just remember any case that wraps around the edge tightly is probably not compatible
Does this tippin cover as good if not better than SGP Curved Crystal? The reason I ask is the images on Amazon show that it does not cover the portion immediately above the ear speaker. I love the curved crystal except for the dents that won't disappear. Does the tippin have this problem? Thanks!
the tippin pretty much covers all. ear speaker, sensors+camera, and home button are cut out. if you press on it hard enough with your nail, itll leave a dent. will it go away eventually? dont know, probably not. i think the tippin scratches kind of easily. i noticed a small rainbow line. not sure if its a scratched screen protector or cracked glass. another thing about these screen protectors...you have a small margin for error for placement. i was ocd at first and wanted it on 100% perfect alignment. i tried the tape the side method. thought i had it on perfect, but nope. a small sliver didnt stick because it was on slightly to the left. took the whole thing off and could not put it on as good as before. i spent almost an hr, gave up and ended up with even worse alignment. so my advice is get it aligned the way you want it on the 1st try. since these were a ***** to apply, id like a screen protector thats between full and gapped coverage. but the clarity is good and i think it gets slightly less fingerprints than the naked screen.
aznblade said:
is there such thing aside from the spigen curved one? i heard the spigen ones are garbage. i've used skinomi (they were all right, not as durable), they covered 95% of the screen. the zagg invisible shields were garbage, wasted 25$ and thought it covers the whole screen but it left a huge gap.
Click to expand...
Click to collapse
The Spigen is good. I would say they are far superior to the Skinomi ones.
I went this route. This is now in my top spot for screen protectors.
http://chrismchoi.blogspot.com/2013/03/seidio-vitreo.html
This is what I use. It covers the entire screen and is smooth. It also seems to repel fingerprints and is somewhat scratch resistent. Most people looking at my phone can't even tell there is a screen protector on it.
http://www.amazon.com/REALOOK-Prote...=1362606630&sr=8-1&keywords=galaxy+s3+realook
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
j76ms said:
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
Click to expand...
Click to collapse
I don't notice any dents, but I use swype as my keyboard of choice. Do you push hard when texting? I let my 4 and 6 year old use my phone often, and I still don't notice much wear. There are a couple of tiny scrathes on my screen protector, and they are only noticeable in direct light at certain angles. I have had the protector on for about 3 months. My old protector (Zagg HD) showed fingernail dents and nicks about a week after I put it on.
j76ms said:
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
Click to expand...
Click to collapse
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Jottle said:
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Click to expand...
Click to collapse
Thanks Jottle. I was thinking it is probably the same material as the curved crystal. I have found 3 cases that the full coverage works with: UAG, Eclipse Element and SGP Modello. I love the look of the full coverage with these cases but with the dents, I have to replace the protector about once every 2 months.
Jottle said:
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Click to expand...
Click to collapse
I am currently using the Seidio Surface case with my Realook screen protector. It works without any problems. I have also used the Rock Quicksand case and the Incipio Sylicriic without any issues.
Moozh1 said:
I am currently using the Seidio Surface case with my Realook screen protector. It works without any problems. I have also used the Rock Quicksand case and the Incipio Sylicriic without any issues.
Click to expand...
Click to collapse
Just wanted to add that I've now tried the Tippin full coverage screen protectors as well. They are incompatible with my case as well. There are some tpu cases that will work with full coverage protectors. But the extremely tight ones that barely cover the corners will not.

Screen Protector Discussion Thread

Hi everyone. I searched the forums for screen protectors, and what I found was a whole lot of threads on various screen protectors out there, but nothing centralizing these discussions. So I thought I'd create this thread.
1. What type of screen protector do you use?
2. How has it held up?
3. Have you gone without a screen protector?
4. If so, do you have any scratches?
5. What's the most you have paid for one?
6. What's the cheapest you have paid for one?
7. Any Rants? Any Raves?
8. Any you would recommend?
9. Any you would want to try?
10. Any tips to putting certain ones on?
Let's help each other out by sharing our knowledge on screen protectors for the HTC One.
Top screen protectors according to you guys.
1. Mime Feather Glass Screen Protector - $27.95 http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
2. Zagg Clear HD Screen - $19.99 http://www.zagg.com/invisibleshield/htc-one-cases-screen-protectors-covers-skins-shields
3. Verizon 3 Pack Anti-scratch Protectors - $12.99 http://www.verizonwireless.com/acce...-protectors-3-pack-w-screen-wipe-for-htc-one/
Installation videos
1. Android Authority demonstrating how to install wet and dry screen protectors such as the Zagg and ScreenWear http://youtu.be/sf0a-c7WH8U
2. Danny Winget demonstrating how to install a glass screen protector such as the Spigen Glass http://youtu.be/F4_wtcmWVv4
Reviews via Amazon
1. Zagg HD http://www.amazon.com/ZAGG-HDHTCM7S...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
2. Zagg Original http://www.amazon.com/ZAGG-HTCM7S-i...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
3. Mime Ghost Glass http://www.amazon.com/MIME-Tempered...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
4. AmFilm http://www.amazon.com/Protector-Inv...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
5. Tech Armor http://www.amazon.com/Tech-Armor-De...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
6. Skinomi http://www.amazon.com/Skinomi-TechS...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Drop Test
1. Zagg Shield drop test http://youtu.be/NxcUMZ4bTCM
2. Tempered Glass drop test http://youtu.be/33T1Qun7jsQ
Zagg HTC One High Def Screen Protector - Amazon
I think Zagg makes the best screen protectors, I have used them on both the HTC Droid Incredible and the HTC One. The Zagg screen protectors are not the cheapest option for screen protectors especially if you go for the ultra clear model but I think the cost is worth it, especially since zagg offers warranty replacements, you only pay for shipping. With the warranty replacements, registering your product on the Zagg website is quick and easy, there are no serial numbers you need to have or anything, you only need to tell them what device you got it for and which model screen protector you got.
Another benefit of the zagg shields is the lifetime of the screen protector, in my experience the screen protectors lasted almost 2 years for my Droid Incredible before I replaced it, the screen protector started to come off around the edges of my phone. While the screen protectors do age, I would much prefer the aged screen protector opposed to any damage to my screen. In my entire life of my Droid Incredible, bought in April 2010 and still used as an e-reader by my girlfriend today, there is not one scratch on the screen thanks to the Zagg shield.
While I have not personally tried the Verizon 3 pack of screen protectors, I have had friends use them and they were disappointed with the quality of them, the biggest issue was having the screen protector stay on.
Zagg screen protectors have done such a great job in my opinion I have not wanted or even thought of trying another brand.
As for tips to putting the Zagg brand on, make sure you wash your hands before you do anything, clean the screen so their is no oil, fingerprints, dust or anything else on the phone, make sure the spray gets on both the screen protector and the screen but do not soak either, just enough spray to cover the phone and protector. I found it best when applying the screen protector to start at the top of the screen in one of the corners and work your way to the opposite top corner then work your way down, make sure to use the applying tool they put in the packaging, be sure to use a good amount of force when use the tool but be careful not to apply too much pressure and crack the screen.
If you do not want to try putting the screen protector on yourself, you can go to the Cell Phone employees at Best Buy and have them put the screen protector on. You do not need to purchase the protector from Best Buy, but they charge you a fee to do it. The major benefit of this is that if they screw up and ruin your protector they will replace it.
I tried the Verizon 3-pack when initially purchasing the one. While they are decent, I knew I wanted something a little more rugged.
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent. I tested car keys, nails, and knives on the screen protector after applying it to the phone and absolutely no marks showed up. It fits perfectly to the parameters of the screen and is hardly noticable after application. I would highly recommend this product. I ordered it from the Mime USA website for about $28, they even threw in a code for free shipping!
Sent from my HTC6500LVW using xda app-developers app
I usually don't use screen protectors and whenever I put on a case, I take it off an hour later. I've had the phone for like 9 months now and the screen is fine. There are tiny little scratches but you can't notice them unless you try really hard to, they don't affect the clarity of the screen in any way. I just don't like using screen protectors because they attract finger prints and smudges so easily even when I try a more expensinve screen protector. Honestly the screen will be fine for a long time. Yes there will be extremely tiny scratches but you won't care because they're almost non-existant. But one thing to keep in mind though, is that sand is crazy harsh on the screens, so I'm extra careful when I go to the beach with my phone. That's when I suggest putting on a case and a screen protector. Because even if a tiny bit of sand getes in your pocket, it might cause a little damage. Right now my phone is brand new since I got it replaced because of a camera issue, and I just can't get myself to stick with putting on a case or screen protector, I had a screen protector on it but I took it off 2 weeks later because I miss the naked screen.
Spitfire91726 said:
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent.
Click to expand...
Click to collapse
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
i'm using an invisible shield screen protector. Went on pretty easy, there were no bubbles, and it's pretty thick. I've only had it on for a week, so I can't say much about durability, but it's pretty good as far as a screen protector goes. I'm still very partial to those matte finish screen protectors, so i'll probably be picking up one of those in the future.
BygSii said:
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
Click to expand...
Click to collapse
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
tyler.durden said:
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
Click to expand...
Click to collapse
+1 what he said, minus the experience with Spigen. The MIME Feather is the first glass screen protector I've tried, and I don't think I'll ever use anything else. It's superb and well worth the premium price. With that on the screen and a Ballistic Shell Gel case on the rest of the phone, I don't worry about it too much.
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
astmacca said:
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
Click to expand...
Click to collapse
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
xzyragon said:
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
Click to expand...
Click to collapse
Its definitely putting another layer of glass on the screen. You have to be careful and get it in the right position 1st time as they dont move around once stuck down. Removing them without breaking is, i suspect, very difficult. The "tape hinge" method of application works pretty well.
I have found the touch sensitivity on mine to be great. Certainly there is no difference to the "usability" of the phone, and the smoothness an feel is as good as the original screen.
I did read one review where the buttons on screen wouldn't work with a glass screen protector, but that has certainly NOT been my experience. From what i have read the thickness of these has come down from around 0.6mm in early incarnations to something like 0.15mm and being flexible in some brands.
I got a 0.4mm one. No scratches as yet. Its supposed to be very hard (9H??). I had no issues with fitting my case on after installing the screen protector.. Its a cheap silicone and hardback model that provides good corner protection. Hopefully the screen protector will help if it falls on its face sometime.
What about Just Like Glass?
Has anyone tried it?
Didnt know protectors like the Mime feather existed. Will have to try it out.
Xeternall said:
Didnt know protectors like the Mime feather existed. Will have to try it out.
Click to expand...
Click to collapse
Just bought my first one a month ago (MIME Ghost), best screen protector I have ever used. It's definitely scratch resistant and feels like the original screen. Not sure how it will hold up to drops, but that's not something I am willing to test.
Had a friend buy some Write Guard screen protectors for his HTC One. I installed one on his HTC One. Screen protector was all ready getting all kinds of scratches in it. No Bueno.
I used the XtremeGuard screen protector for a very long time on my HTC One, but recently I decided I wanted a matte finish screen protector, so I switched to Tech Armor Anti-Glare. Feels much nicer to me and gets a lot less fingerprints and smudges.
I was using the protector that came with the UG case. After reading this thread, I picked up a MIME. Very impressed. It goes on dry, was easy to remove and reposition and left absolutly no bubles (these drive me CRAZY). It has somewhat finger print resistant and I did not heave to deal with wetting the protector, then waiting 24 hours to see if all the bubles went away. Best screen protector I have purchased and believe me, I have tried at least 20 different types over the years.
I have had no issues with the touch sensitivity. You can't even notice it's on unless you look really closely at the top edge.
Using the screen protector that came with my otterbox comuter and it is quite terrible.
The screen protector has been on since April and it is already deteriorating. The spots where I'd swype, type show heavy signs of use. With a faint finger swipe over the screen you can actually feel the difference.
Other than that, the actual performance isn't the worst. Glare and all in the sun is bad, indoors though I don't have any issues.
Will look into MIME.
Cheers,

Categories

Resources