This is basicly what the updated White Rabbit would be if I could get the aroma scripting right. The rom has be heavily tweaked (nothing dangerous) and themed with Cyanbread framework.
USE THIS ROM AS YOUR PRIMARY ROM. I INCLUDED MULTIBOOT TO MAKE THIS ROM NOOB FRIENDLY AND HAVE A CM9 MULTIBOOT PACK READY TO GO. I'M GOING TO RELEASE AN UPDATE FOR CM9 EITHER TODAY OR TOMORROW ADRESSING THE BASEBAND, APN SETTINGS, AND DEFY PARTS. ITS IN ALL CAPS TO MAKE THIS REALLY NOTICIBLE.
ANY SUGGESTIONS, WANTED FEATURES, OR COMPLAINTS??? POST AND I'LL MAKE A PATCH\UPDATE WITH THEM WHEN I HAVE THE TIME. I PLAN ON UPDATING THE ROM BASE WITHIN 2-3 DAYS OF QUARX'S CM7 RELEASES, AS WELL AS THE MULTIBOOT CM9 PACK.
Features
Customized Cyanbread Theme and Framework Themed
Custom Framework Animations
Transparent Status Bar\Notification Drawer
Touch Recovery Preinstalled
Multiboot Preinstalled
Miui File Explorer from Defy Forums
Multi Boot Manager
Bravia Postprocessing (a new one that works)
Beats Audio (a better updated beats)
No Custom Overclock but is Undervolted with Safe Values
Conservative\Smartass Tweaked (not enabled by default)
30 Step Volume for Music, 7 for everything else (phone calls were 5 by default)
Gapps preinstalled with hacked Maps
Zepplinrox's scripts installed in xbin
Based on Quarx 2012\04\10 CM7 Nightly
Install Instructions
First make a directory on the sdcard called multiboot (mkdir /mnt/sdcard/multiboot from terminal) Its required for MultiBoot Manager.Then install this the same as any other CM7 Rom. If you're coming from Quarx's 2012\04\10 CM7 all you have to do is wipe cache and dalvik, no data wipe required.
For the complete experience, after first install, open Theme Chooser and select Cyanbread UOT then go to Settings\CyanogenMod settings\Interface\Notification Power Widget\Indicator Color and change the value to ff00ddff. That's zero zero by the way, not oh oh.
I also recommend going to /Settings/CyanogenMod settngs/Performance/Cpu settings/ and changind governor to Conservative (for better battery) or Smartass (for better response than Conservative but slightly less battery) and then selecting apply on boot.
Zepplinrox's scripts are installed to xbin and named 3g.sh, kak.sh, v6.sh, and dhb.sh I highly recommend using 3g.sh and selecting Expermental 1 (it will almost double 3g speed; at least it does mine.)
Download CM7.2 Custom
md5sum = 3699ef23b52ce4748bf4943a1cac63c0
Other things to point out.
The Bravia mod I used works, I took a picture with the Bravo camera, stared at it for 5 mins, flashed the Bravia mod, and the picture looked a lot better and less fuzzy.
If you use PowerAmp, uncheck direct volume control to fix glitches with the Volume Step Mod. Power Amp settings - Audio Engine - Advanced Tweaks - Uncheck 'Direct Volume Control
BASE ROM UPDATES and THEME PACKS
Install All By Flashing Zip in Recovery. Wipe Cache and Dalvik Cache For Theme Packs
CM7 Custom Update 1 - Download Here
*Reverts back to Standard Wear Out Your Volume Button and Thumb Recovery
*Adds Multiboot 0.5.5 (It was released as I was uploading the Rom)
*I'll reinclude Touch Recovery when Multiboot is handled better. I could never get it to work. Just because the forum says it works doesn't always make it true.
CM7 Custom Stock Theme Pack - Download Here
*Converts Cyan Theme to the Default CM7 Theme
CM7 Custom Cyan Stock Rethemer - Download Here
*Use this if you reverted back to stock theme and want Cyan Theme back
*Can also be used on Quarx 20120410 Nightly Rom
MULTIBOOT ROMS
CM9 20120412 Multiboot Rom - Download Here
*To install, extract the zip and move the folder named CM9 to /mnt/sdcard/multiboot . That's it. Just Reboot and Select CM9 from 2nd-System. 2nd-System is Default if you used Update Pack 1. If not, reboot to bootloader and select 2nd-System and boot. Then pick CM9 or NAND for CM7 Custom.
*A complete, unused install of CM9 ready for multiboot. Comes with Gapps 20120317 and Hacked Maps.
*While the Download is only 160mb, it extracts to 715mb.
*Uses 300mb for System, 300mb for Data, and 150mb for Cache.
*No Superuser. Its a bug of Multiboot.
*Does not include Multiboot Manager.
*No tweaks, mods, or anything done. Stock Quarx CM9. (Except Gapps and Maps)
*Defy Parts doesn't list everything Fix is Here
Thanks go out to Quarx, Zepplinrox, Epsylon3, m11kkaa, apoonet, royale1223, TweetyPeety, AndroidON, matiasjrossi, syllogyking and anyone else I forgot to name.
work
skeevy420 said:
This is basicly what the updated White Rabbit would be if I could get the aroma scripting right. The rom has be heavily tweaked (nothing dangerous) and themed with Cyanbread framework.
Features
Customized Cyanbread Theme and Framework Themed
Custom Framework Animations
Transparent Status Bar\Notification Drawer
Touch Recovery Preinstalled
Multiboot Preinstalled
Miui File Explorer from Defy Forums
Multi Boot Manager
Bravia Postprocessing (a new one that works)
Beats Audio (a better updated beats)
No Custom Overclock but is Undervolted with Safe Values
Conservative\Smartass Tweaked (not enabled by default)
30 Step Volume for Music, 7 for everything else (phone calls were 5 by default)
Gapps preinstalled with hacked Maps
Zepplinrox's scripts installed in xbin
Based on Quarx 2012\04\10 CM7 Nightly
Install Instructions
First make a directory on the sdcard called multiboot (mkdir /mnt/sdcard/multiboot from terminal) Its required for MultiBoot Manager.Then install this the same as any other CM7 Rom. If you're coming from Quarx's 2012\04\10 CM7 all you have to do is wipe cache and dalvik, no data wipe required.
For the complete experience, after first install, open Theme Chooser and select Cyanbread UOT then go to Settings\CyanogenMod settings\Interface\Notification Power Widget\Indicator Color and change the value to ff00ddff. That's zero zero by the way, not oh oh.
I also recommend going to /Settings/CyanogenMod settngs/Performance/Cpu settings/ and changind governor to Conservative (for better battery) or Smartass (for better response than Conservative but slightly less battery) and then selecting apply on boot.
Zepplinrox's scripts are installed to xbin and named 3g.sh, kak.sh, v6.sh, and dhb.sh I highly recommend using 3g.sh and selecting Expermental 1 (it will almost double 3g speed; at least it does mine.)
Download CM7.2 Custom
md5sum = 3699ef23b52ce4748bf4943a1cac63c0
Other things to point out.
The Bravia mod I used works, I took a picture with the Bravo camera, stared at it for 5 mins, flashed the Bravia mod, and the picture looked a lot better and less fuzzy.
If you use PowerAmp, uncheck direct volume control to fix glitches with the Volume Step Mod. Power Amp settings - Audio Engine - Advanced Tweaks - Uncheck 'Direct Volume Control
Thanks go out to Quarx, Zepplinrox, Epsylon3, m11kkaa, apoonet, royale1223, TweetyPeety, AndroidON, and anyone else I forgot to name.
Click to expand...
Click to collapse
full work....
Yes, its been my primary rom since Quarx released 2012\04\10, well an hour afterwords actually, but anyways....It works great and I haven't noticed anything wrong at all. Quarx's latest was the best rom for the Bravo yet to use as a base to mod with.
We got lucky, they released Touch Recovery Compatible Multi Boot today. I'm actually about to install CM9 on multiboot and release that as an addon to this rom, only modifications would be Gapps with hacked Maps.
I figure this would make it easier for people to set up CM7 with a CM9 on Multi Boot with Touch Recovery. Not everyone here reads English well enough to follow the instructions, or they just find the instructions difficult to do.
I'm also going to release a stock theme pack as well with the stock animations. I don't know why you'd rather have Ugly Green and Orange, but whatever.
Update\Theme Packs
Added Update Pack 1 with Old Recovery and Updated Multiboot. A new Multiboot was released while I was uploading the Rom.
Added Stock Theme Pack and a Cyan Retheme Pack that can also be used with Quarx 20120410 Nightly.
Install the zips as normal......Details and Links at bottom of first post.
helpº
skeevy420 said:
Added Update Pack 1 with Old Recovery and Updated Multiboot. A new Multiboot was released while I was uploading the Rom.
Added Stock Theme Pack and a Cyan Retheme Pack that can also be used with Quarx 20120410 Nightly.
Install the zips as normal......Details and Links at bottom of first post.
Click to expand...
Click to collapse
it can put the instruciones for novices since I speak by all the Latins---
That it happens if I install zip. as normal mind we installed any other ROM is that not like making the instructions that you recommend. I am a novice to do that
mataflakitas said:
it can put the instruciones for novices since I speak by all the Latins---
That it happens if I install zip. as normal mind we installed any other ROM is that not like making the instructions that you recommend. I am a novice to do that
Click to expand...
Click to collapse
I'm not sure if you're asking for help, or offering to translate the post....
Just flash the Updates\Themes in recovery, wipe cache and dalvik cache. The themes can also be used with Quarx's 2012/04/12 rom.
For CM9, just unzip it and move the folder CM9 to /mnt/sdcard/multiboot.
Just to clairify, except for CM9 Multiboot, everything CM7 can be flashed in recovery and only needs cache\dalvik wipe. Even the rom if you're using Quarx 20120410.
Only use 1 theme pack at a time. They both replace the same files, so only the last theme flashed would stick.
I'm not sure how to make this easier, other than screen-by-screen select this instructions, but the install is same as any other CM7/9 flash. That's also why I removed Touch Recovery....not everyone has used it and some functions act differently than they do in CMW Recovery. (Wipe Data\Factory Reset also wipes sd-ext for example). I had 10 gigs of music on sd-ext I had to recopy onto my phone when I tested Touch Recovery with CM9. I prefer using sd-ext for my favorite data since ext3 is a much safer filesystem, and fat32 is extremely prone to data corruption, especially if you dual-boot Windows and Linux.
If you'd like to edit you're 2nd post into Spanish Translation, go right ahead. It seems like there's an equal number of Spanish and English users on this board, and that would be helpful. Hell, more than half of the questions asked in the past few months were Spanish speakers asking Josuearisty how to do something because they didn't understand the English instructions.
I do know the feeling, I visit some foreign boards, and I'm like WTF, even with Google Translate.
Related
All credit goes to Paul over at Modaco "not me lol i just copy and paste it all lol"
I'm pleased to present a WIP (work in progress) pre-release of my next Android 2.1 based MoDaCo Custom ROM for the GSM HTC Hero! READ THIS WHOLE POST BEFORE YOU START! No, really, it contains everything you need to know.
This is a sneak preview of the base that i'll be using for the full MCR release... to give you all a chance to play, tweak, test, comment etc. etc.
About MoDaCo Custom ROMs
MoDaCo Custom ROMs are based on official ROMs - either shipping or leaked. A MCR release is designed to feel as far as possible like a stock ROM, with optimisations, tweaks and complimentary additions that enhance the user experience. The aim of a MCR is to be ultra reliable for use on an everyday device.
Requirements
In order to use this ROM on your device, you must have a custom recovery image installed. You can read more about how to install a CRI on your device in this topic.
Features Included
•Based on the Chungwa 2.1 release
•Rooted with Superuser 2.1 by ChainsDD
•Built with the latest version of MCR build process which reduces the size and boosts the speed of the ROM
•STOCK KERNEL
•Rooted boot image with 'adb remount' permission and superuser APK
•busybox with Droid Explorer support
•terminfo and settings in boot.img to allow nano etc. use
•System dalvik-cache moved to /cache partition (cachedalvikcache)
•MCR version displayed in 'About' screen
•Added HTC_IME from Legend
•Added APN database to enable auto-configuration of Euro APNs
•Added Click-Drag rearrange to Rosie / Sense
•Added Voice Dialer
•Added Voice Search with optional standard android keyboard
•Updated Google Maps
•Optional dropbear (SSH server, username 'root, port 2222, password displayed in 'About' screen)
•Optional A2SD and A2SD+ (old style) via the online kitchen
•Optional baked in Wavesecure via the online kitchen (installed to system partition for maximum security)
•Optional WiFi Status indicator
•Removed Chinese content (will be available as an optional kitchen component)
•Completely de-odexed for optimal customisability
To install this ROM:
•Ensure you have a custom recovery image installed (see 'requirements' above)
•Download the zip file of your choice from the links below (or the online kitchen) and copy to your SD card
•Restart your device in recovery mode (power on with the home button pressed)
•PERFORM A NANDROID BACKUP FROM THE MENU
•Select the option to apply an update zip, and select the zip file you copied to your memory card
Note: As this is a non-odexed build, the first boot will take a while. After you have completed your initial setup, I recommend rebooting to allow the cachedalvikcache script to free up space on /data.
Upgrading
No wipe is explicitly required in order to use this ROM, however if you do encounter issues of any kind, it is recommended that you wipe your device and reproduce the issue before raising it here.
Downloads
r4 base (no additions, no A2SD) -
•r4 base with A2SD (no additions)
CLICK ME TO VIEW/ DOWNLOAD
Hi
Is it multilanguage? Can i switch to Spanish?
Thx for the work
Shiverson said:
Hi
Is it multilanguage? Can i switch to Spanish?
Thx for the work
Click to expand...
Click to collapse
Click the link all info is their buddy !!!
I have to add that this rom is fast very very fast indeed, smooth no lag what so ever no fc what so ever all working wow thanks paul nice work buddy
This Rom is very fast and stable, good job Paul !
[*Edit ] -> After the first reboot, the "com.google.process.gapps" stop unexpectedly... and the phone is unusable...
Will we be able to to replace the kernel with an OC one in the final version, like we can on other roms?
I'm having issues such as my device hangs/freezes during use. Then after awaile it reboots. Does anyone have a similar problem?
after using it for while i have actualy had the freeze reboot 9 x and the .com process 6 x lol but its in beta so it will be fixed
Yeah he's taken it back down again,.... But Ive had ZERO force closes so far!
ddotpatel said:
Yeah he's taken it back down again,.... But Ive had ZERO force closes so far!
Click to expand...
Click to collapse
Had a couple of force closes after installing my apps like swype ,so would advise against installing this until paul releases the new version
Yep I spoke too soon,... done a reboot, then everything went crazy!
It's back up now - just setting up, so far so good!
Just tried the second release of the ROM and loving it!
Really quick and no FC's yet.
Is it multilanguage? Include simple Chinse？
I think no chinese
From the features:
Removed Chinese content (will be available as an optional kitchen component)
Everything seems okay, but music player keeps FCing, and having the widget on the dekstop raises an FC every few mins
r5 is public.
This is a ICS 4.0.3 AOSP Galaxy Nexus Rom completely built from source. The kernel is also built from source and it packaged in with the ROM. I try to keep everything as close to pure AOSP that I can. I added a few features that I wanted and prefer. This ROM is made for Speed and Stability. There are plenty of mods out there that you can add if you want, I rather have a solid base.
ModAGnex V-1-1 Features
AOSP Optimized lean kernel V-1
superuser & busybox built from source (working on adding bash for version v2)
Reboot options with Screenshot
HTC Soft Keys Mod with 1% battery mod
Wifi Tether unlocked (removed SPG.apk)
VZW Boot Animation
Sure I am forgetting more.....
ModAGnex V2-0 Change Log
Completely optimized
Lowered the animation times (less lag)
Disable error checking
Changed the Max framerate of the system to 240 fps
Remove software (CPU) rendering and use full PowerVR SGX 540 (GPU) rendering
New Optimized Kernel (credit to JT1134 for his help and repo)
Removed some code that was causing error's
Removed HTC Soft Keys Mod with 1% battery mod (Download from this thread http://rootzwiki.com...ery-mod-by-wjd/)
ModAGnex V3.0 Change Log
Added added 1% battery mod (icons kanged from Kejar)
Updated tuna kernel to 3.0.16 (By JT1134)
Lock screen has phone,text,camera,and lock options. (quad lockscreen mod)
Removed a lot of files that did not need to be there, saved space.
Restructured my vendor and the way the rom compiles (probably only noticeable to me and size)
Fixed some minor System Ui bugs that caused some lagging.
Tweaked auto brightness values.
And who knows whatever else I forgot......
Install Instruction
Download Rom MD5SUM 7bb7670eae2498230fc11258599018c5
Download Gapps (Version-011412) MD5SUM f27a73a8cded168d5644c403d992b40f (credit to Kejar31)
MIRROR DOWNLOAD (Hosted by Goo-Inside.me
Use Clockwork Recovery (credit Koush)
Wipe data and cache
Wipe Dalvik Cache
Install zip from /sdcard
reboot.
wait a few minutes for kernel to initialize
THEN
Allow time for the ROM to load and settle, then reboot into recovery and load the Gapps.
Install gapps zip from /sdcard.
Reboot
Credits and Thanks
Snkbitten
JT1134
Cyanogenmod
Rootzwiki and Rootzboat Team
TeamKang
Peter Alfonso -for initial vendor setup
Poitee -for kernel building help
ChainsDD - for root
WjDDesigns -for the softkeys
Kejar31- for the latest working Gapps
TreyMM
Heyitslou
And everyone else I forgot........
Bugs
Don't know,
Contact me on Twitter @Deodexed and please let me know.
I think you posted in the wrong section
Sent from my Galaxy Nexus using xda premium
Optimusg2x said:
I think you posted in the wrong section
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I know, I sent the mod a message and he just moved it to CDMA! Thanks!
This ROM sounds cool but is getting no attention so I wanted to give it a nice friendly bump!
Looks good sir, gotta like a healthy stock from no doubt!
Thank you!
Sent from my vzw Gnex.
For those who have tried this ROM how are things running so far. Its nice to have a more clean ROM, that yes I can add some tweaks to but speed and stability is my real goal.
Can we use SetCPU, are there any paticular mods that do not work with this ROM? I was looking to add a battery meter, and the added buttons for search and menu soft keys and maybe the blue soft keys option.
Beyond those three I would be pretty stock. I just wanted to check first.
RaptorMD said:
For those who have tried this ROM how are things running so far. Its nice to have a more clean ROM, that yes I can add some tweaks to but speed and stability is my real goal.
Can we use SetCPU, are there any paticular mods that do not work with this ROM? I was looking to add a battery meter, and the added buttons for search and menu soft keys and maybe the blue soft keys option.
Beyond those three I would be pretty stock. I just wanted to check first.
Click to expand...
Click to collapse
Yes you can, its built in to the kernel. Try it and leave feed back. Version 3 just released.
GAPPS Question
Why is the Gapps file so big (82 MB)?
forgiventhief said:
Why is the Gapps file so big (82 MB)?
Click to expand...
Click to collapse
That is normal, check the gapps for most other roms and the size of them should be close. ROMs with gapps included will have a size around 190mb or so...
Sent from my Gummy Nexus
how do you get the search icon to show up in the menu? I cant for the life of me find it...
Flashed the rom a few days ago and I like it so far but I have a question. I flashed some soft keys that I guess took away the search button but now the three remaining buttons seem too close and not uniform is there a way I can change it or somehow move them?
Sent from my Galaxy Nexus using XDA App
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
That could be a thing with soft keys you flashed, ask the dev what space alignment he used.. there is roms out there that will change that, not this one tho. Hope that helped!
Sent from my Galaxy Nexus
CyberGR-MOD|NS.NGN ver. 12 Hybrid Mix ICS
ALL CREDIT TO CYBERGR
**CyberGR-MOD|NS-NGN ICS version 12 Hybrid Mix (Thunder Storm) is finally here with lots of changes, many additions and all ICS features working fully TWEAKED, really FAST, SMOOTH and STABLE..**
Features :
Built-on 4.0.4 IMM76I Sources and some of the latest parts of CyanogenMOD 9 + AOKP
Kernel Base : SimpleKernel 1.20 by Terryhau (You can still flash what ever kernel you want.)
Android version 4.0.4 - IMM76I
Radio : free (you can flash which is best for you and your area, or stay with what u have now)
All the features till now supported from CM9 builts + AOKP
SD-Nand Card I/O Speedtweaks - EXT4 | Ram Tweaks
All Ezekeel`s Mods *BLN|BLD|BLX|LIVEOC*
NSTools by arifhn Integrated to easily configure all the above Mods
Overclock able up to 1400Mhz + Extra Boost with LIVEOC
Zipaling on boot
Zipaling all apps for better Ram usage
Fully Deodexed
Rooted and Busyboxed
Fast times on Reboots & Boots
3G/HSDPA Tweaks
Init.d scripts support
Cron scripts support
Full GPU HW accelaration
Newest Host File (Ads.remove)- 95%+ of ads are now blocked
Tweaked Trebuchet Launcher2.apk + 2 new wallpapers
New HD ICS Galaxy Nexus Boot Animation
Dev Tools + Spare Parts
CyberGR-MOD Control App (Massive thanks to RomanBB and Open Kang Team for letting me use those source code.)
Voodoo Control App
Debugging notification hide tweak
Working Media Effects under Video Recorder Settings
Facebook Sync hack
T9 Dialler
Hold back to kill application
Touch to focus on camera app.
Quad lockscreen and Octo lockscreens
Battery percentage
Enhanced Power Menu
Multi language
Control music with volume keys while screen is off
Power menu toggles
Newest Android Market and Google Music 4 ICS + MusicFX
Car Home Included | Modified Calculator with scientific functions | ES File Explorer by EStrongs | ICS Sounds with +2db Boost |
ROM Manager | Google Maps & Earth| Google+ & Messenger | Font Installer|
And more..
What`s working : EVERYTHING!
Installation Instructions :
A clean install is recommended to avoid any FC etc.
Download CyberGR-MOD.NS.NGN_ver.12*.zip file to your computer.
Boot into ClockworkMod Recovery
From main menu select wipe data/factory reset and wipe/cache partition
Use Dalvik-wiper.zip to wipe Dalvik Cache.You can get it from here : Link 1 or here : Link 2
From advanced select reboot recovery
After rebooting recovery wipe data/factory reset & cache again and then from mounts and storage select format /system /data /cache /boot & format /sdcard.
Now select from mount and storage, mount USB storage and copy over to your Nexus S storage the CyberGR-MOD.NS.NGN_ver.12*.zip file.
Detach the USB CABLE from your Nexus S.
From main menu select install zip from sdcard then choose zip from storage
Select CyberGR-MOD.NS.NGN_ver.12*.zip and proceed with the setup.
When done!Reboot your device
First boot as expected might be slow but nothing to worry about, its normal.After first boot, before doing anything a reboot is recommended.(fixes misplaced CyberGR-MOD wallpaper in Ver.12 too)
ENJOY!!
PS : 1. First time NSToolls will ask you for superuser permissions, be careful to press ALLOW, then it will come up with a notification saying "some settings have been discarded" blah blah, don`t worry it`s absolutely normal!!Just open NSTools, configure and reboot!!
2. Be careful don`t wipe battery stats, do it only if you want to calibrate your battery!!
3. Clean Install for Version 12 as always is recommended...Although if you are coming from Version 11 a simple Wipe Cache + Dalvik Cache and optionally wipe data/factory reset will just do the job!
4. First start up might take a little bit longer this time.It`s 100% Normal.
5. WARNING -- > If you want to try and change FONTS on your system using the Font Installer App included in CyberGR|MOD just be sure to make a NANDdroid back up 1st via CWM Recovery..95% of the fonts working just perfect but there is a 5% that maybe cause an infinity Boot Loop on your system!For Customaa & Corsiva fonts have been reported to cause the problem i mentioned above.
http://img542.imageshack.us/img542/1761/79300178.png
Download Ver.12 14.04 (Thunder Storm) :
http://www.mediafire.com/?8qxlznt73rnqxja
DOWNLOAD DARK BLUE FULL THEME
http://www.mediafire.com/?shneugca3cm6m68
Disclaimer :
You can always flash what ever kernel you want..
Recommended Kernel Alternatives :
1 . AirKernel by r_data -> Link
2 . Matrix Kernel by mathkid95 -> Link
3 . Trinity by Morfic -> Link
4 . Reference for all ICS Kernel so you can choose which one fits you best by bedalus -> Link
Please be aware that you are flashing at your own risk.
I have spent many hours of my free time and nights asleep doing this (always with joy though), flashing the brains out of my Nexus S.
So if you like my work, a small donation will be much appreciated for helping me buying a spare (used) Nexus S so my main device is not always tied up.
Pressing the Thanks button is obligatory for encouragement!
CREDITS and special THANKS to :
CyanogenMOD 9 Team.
Massive thanks to RomanBB for AOKP parts.
Google Open Source Spirit.
Ezekeel for various MODs + Kernel.
Supercurio for the voodoo app.
arifhn for NSTools app.
Canca14 and http://thesmartphonechamp.com/ for offering me an FTP host and the possibility to create a CyberGR|MOD Web Site
S7icky for offering me an FTP server for hosting CyberGR|MOD ICS Updates
Eugene373 for ICUP kernel.
Mathkid95 for Matr1x kernel.
Morfic for dalvik-wiper.
r_data for Air Kernel.
Bedalus for his very useful ICS Kernels comparison.
Liquidini for recording and uploading a nice CyberGR|MOD quick preview video in HD.
My friend Harontas for offering me a FileSonic Pro & Oron account.
Koushik Dutta for Rom Manager app. & host.
Terryhau for SimpleKernel.
Travis90x for providing themes for CyberGR|MOD
ENJOY and don`t forget to press the THANKS BUTTON if you like my work!!Cost you nothing and gives me some encourage to continue my work!!
:
OP - PM me the PM or message from the original ROM dev giving you permission to port this, then this will be re-opened.
Don't open anymore threads with ports, without express permission from the original developer. Continuing to do so will not bode well.
My first and only warning.
I proudly present to you...... Mi-Roid
Mi-Roid is my port of the crespo MIUIAndroid weekly build with many additions, tweaks and mods added together for a great user experience. If there’s something you'd like added in feel free to post or pm me
For those of you wondering what Miui is.... that is a hard thing to describe but in a genreality it is a complete rebuild of android based on AOSP from the ground up. It has a build in theme manager that makes Cyanogen's look like childs play, you can change almost any little thing instead of applying an entire theme or you can apply an entire theme. It has build in virus scanning, autostart app control, flashlight app and all the goodies of cyanogen or other AOSP roms but in a whole new fashion. It is sort of IPhoneish but still feels like android not some apple product. If you dislike the launcher feel free to download any of your standard favourite launchers and use them, it'll free up some memory too.
Check out this video showing what Miui is
A few of my favorite features are listed below:
**While on the lockscreen if you press and hold home the flashlight will turn on for 30sec
**While on the homescren if you long press home the memory manager comes up to clear/free up memory
I plan on updating by Sunday night or Monday morning following the friday release of each weeks build. This will give me a few days to make sure the basics are working and to try and add features as i work a lot during the week and weekend gotta survive this cruel world somehow
If you have issues or questions please post them up here as someone may be able to help you on the forum before i check my PM's or get online to read/post.
Please Read the rest of this post and the ones below it for all info regarding issues and install before asking a question, i know it's pointless to ask this but maybe it'll save me one headache and at least one noob a thrasing from the senior members.
Screenshots ** Click on it, its a slideshow of a few shots - more to come
Current Version Miui Android 2.11.30
Change Log: http://miuiandroid.com/community/threads/miui-rom-2-11-30.18891/
What's Not Working
**Google Voice**
**Sprint Visual Voicemail**
My Additions & Tweaks
-4way Reboot Mod
-updated to latest Google Play Store v3.10.9
-added latest Miui DSP Manager - credit fusionjack
-added init.rc ability - credit CM team
-added init.rc script for sd read/write speed increase - credit CM team
-added init.d script ability - list of scripts below
*Automatic Zip Align - credit brainmaster
*System Tweaks - credit brainmaster
*CPU - my script to set Matrix kernel
-added latest 4.2 Camera, Libs, and Gallery
-added 4.2 ringtones and notifications
-added Microbes Live Wallpaper back in
-build.prop tweaks
-adb enabled by default
-adb icon hidden
-added latest busybox and modules
-Smooth Scrolling Mod
-Supercharged services.jar - I advise you supercharge your MI-Roid rom, far superior memory management and multitasking
-modified DownloadProviderUI for larger download warnings, added 20MB & 50MB - credit Miui.US Toolbox
-auto convert 2+ long sms into MMS to avoid garbled messages when using stock Mms.apk
-Modified/Themed keyboard with swype for Miui - credit fusionjack
-added latest Google Ears for free Music Identifying
-MMS landscape rotation enabled - credit cat_baxter
-added Marmite v 7.1.3
**there are so many features and things about Marmites kernel, please go to his thread to check it all out
Miui Control Panel - thanks to fusionjack & lenny_kano
-removed Updater.apk, MusixFX (DSP Manager in its place), BugReport.apk, WeatherProvider.apk, LegacyCamera.apk, MiuiGallery.apk
--Special Thanks to bedalus for his kernel and how to build guide
--Special Thanks to Miui Android
--Special Thanks to fusionjack
--Special Thanks to lenny_kano
--Special Thanks to Miui Australia
--Special Thanks to CM Team
--Special Thanks to zeppelinrox
--Special Thanks to dsixda for his kitchen
--Mad props to Fergie for his original how to porting guide based on ICS Miui, it helped me a lot
There are many others who have taught me lots on others phones and if you feel i owe you some credit or i added some of your work and forgot to credit you PM me
***Download Link***
http://www.mediafire.com/?skkwqlwans8e6r2
Previous Builds - will be posted soon
Install and Setup Directions Below in 2nd Post
Common Issues, Solutions and FAQ in 3rd Post
I advise doing a complete wipe for each build and not "dirty" flashing each weeks new build as this could cause issues.
If you are already running Miui you can also use the included backup tool to backup your apps and data, beware that this app does not backup paid for apps, so for example it will backup Titanium Backup but not the Pro Key so you'll have to download some apps via the market again
**Install Instructions***
1) Use Titanium Backup to backup your apps and data
2) Download the latest Mi-Roid version and place at the "Root" of your SD Card
3) Boot into Clockwork or whatever recovery you use and make a backup
4) Do a complete wipe, this would be your dalvik cache, cache, data, system, & boot.
5) Select the Install zip from SD option
6) Select the latest Mi-Roid version you just downloaded
6a) ***Optional*** Install Kernel Of Choice
7) Once install is completed reboot the system and let it boot up
8) After the system has booted up you can reboot into Clockwork and restore your data
***** BEWARE THERE IS A 30 SECOND TO 1 MINUTE LONG BLACK SCREEN BEFORE THE MIUI.US BOOT IMAGE COMES ON. THIS IS NORMAL, JUST WAIT A MINUTE AND YOU'RE BOOT UP WILL START****
***Things to do Upon 1st boot***
-Open MiuiStats from the pulldown and save the preferance to enable reporting, this lets Miui know we're using their ROM and to keep making it for us
-Open the Download Manager and go into the Settings and set the warning limit to 50mb and then turn off the Data download prompt to stop the market not letting you download huge apps. it will only give you a warning to use wifi on files over 50MB, but if uncheck the download on wifi only button and click proceed it'll download even those.
-Open the Play Store and sign into your Google Account
-While everything is Syncing open up Settings and select your google account. Select the option "Location &Settings" and turn it on. This will allow Google Maps and all other Google Services to use GPS for location locks, if you don't do this then GPS will work for all other apps but Google ones
-Open the Permission Manager, this is Superuser for Miui, and click on Manager root apps and turn it on or else your apps won't get superuser permissions. there is a series of 4 or 5 questions it asks before you click accept to root access on apps, so beware.
-Download the following apps
- Voodoo Sound
- Script Manager - this is for supercharging
-Open the Camera as the 1st start up takes a few seconds to a minute to initialize and sometimes it will fc and you'll need to open it again and wait
-Reboot into Clockwork, fix permissions, and Enjoy MI-Roid
****Optional**** Open Script Manager and supercharge your phone - see the FAQ for some important info on supercharging do's and don'ts
-Reboot and Enjoy MI-Roid
I'll post more as i think about it and get to the FAQS section below later tonight and i have screen shots too, just very tired from porting the toolbox and work this weekend
*****FAQS******
Q) What Kernel Is Included with this Rom?
A) Matrix CFS v24
Q) Do I need to flash gapps over this?
A) Nope, the google account framework is included as well as the latest PlayStore.apk, just download whatever apps you want from the Play Store. However here is a link the latest GAPPS working on Miui
Q) When I Send A Text Over 160 characters the reciepient gets a garbled message
A) This won't happen anymore because i modified the app to convert a sms to an MMS as soon as you hit the 160 character limit
Q) How Do I Supercharge My Phone
A) Go here to and download the latest version from zeppelinrox's thread, be sure to thank him too. Once you have downloaded the latest v6 script place it at the "Root" of your SD card. Open up script manager, be sure to give it root access. Select the v6 supercharger scipt and mark the little su icon to run it as su. Click on run, and follow the on screen instructions.
*****This is very important, when setting up your drivers options, do not, i repeat DO NOT select to apply the "Miscellaneous Tweaks & 3G Enhancements", a better version of these are in my init.d scripts!!!!! You also don't need to apply the wheel alignment either as that is another script already provided****
Q) I see lots of apps running when i first start my phone and don't want some of them running
A) Go into the Security Center folder and open the App Manager app, you can use it to select what apps and their services start and run in the background at boot
Q) The stock lockscreen is laggy
A) Yes it is, this is widely known in the Miui community, but it has a plethora of options built into it. If you want a faster one download any v4 theme and go into the theme manager under the mix section and apply it. The same goes for just about any thing or apperance you don't like about stock Miui, you can apply whole themes or just select parts
Nice work. gonna have to try this
Sent from my Nexus S 4G using Tapatalk 2
Do you need Miui gapps from the site or any gapps will do?
Sent from my Nexus S 4G using xda premium
you don't need gapps, the google framework for google accounts and playstore are included, any other gapps can be downloaded from the market. do not flash gapps from CM or other AOSP roms as you'll get a few apps that shouldn't be there
if for some reason someone needs a certain gapp let me know, but this is the NS4G a CDMA phone only available in the US so we shouldn't have any restrictions on apps
Great work. Thanks for the port.. I've been waiting to try out a JB build of MIUI. You just made my weekend.
Great work. Thanks for the port.. I've been waiting to try out a JB build of MIUI. You just made my weekend.
Click to expand...
Click to collapse
No problem, the JB version of Miui is quite nice. if you are going to flash a custom kernel i had the least amount of issues with Mathkids Matrix v23, it has voodoo sound and blinking BLN built in. I just updated my FAQ post but i have had severe issues with several of the other kernels in terms of bluetooth and battery drain so beware
Wow.. finally someone port jb miui for nexus s 4G, thank you
Sent from my Nexus S using xda premium
Awesome... I love MIUI...
Can anyone post some screenshots?
Not bad! Going to give a run through.. Seems fine so far.
Screenshots attached as requested. This is right after first boot.
This looks AWESOME! I went back to stock jellybean, but I'm going to root and install this later! How does battery life seem so far? Yeah, yeah, I know, give it a couple of days for the kernel to settle, but still... xD
Can anyone trying this confirm if 4g works?
lurtis said:
Can anyone trying this confirm if 4g works?
Click to expand...
Click to collapse
Yep (theme installed now)
And battery.. Way too early to tell. I'm only an hour into using it.
Will you be releasing an add on pack. For DPI etc ....
Sent from my Nexus S 4G using xda premium
haven't used miui in awhile does it still show high usage when u kill apps going to try when i get home wat kernel is everybody using thanks
sick. thanks for the confirmation.. on rasbean now but may have to give this a go....i miss miui and the ics version was crap, but the gb version didnt have 4g.
It's a little "heavy" feeling but MIUI isn't exactly a lightweight ROM so I expected that.. I had tried the ICS version and it was unbearable slow.. So far this is pretty damn good all things considering (feature filled custom JB ROM on 2 year old phone)
Nice ROM at lease jellybean miui is fast & smooth when compared to miui ICS which was way to laggy but miui is not my cup of tea I'm rocking Rasbean
Sent from my Nexus S 4G using xda premium
Kronic BlueMod V 4.3 / V5.1 for 4.2 framework
- i posted v5 on a reply... wasn't thinking it's on page 1.
- it is normal for first boot to take a long time after flashing mod, during this time the system is updating the cache partitions new drawables etc because system files changed. 1-3 minutes maybe. if it starts to take really long then flash backup zip or reflash the rom you were using to patch the files back to normal, this shouldn't really happen though unless you get currupt download or flash to incompatible rom.
for bell based v20f, also works on most other v20f but some icons may need to be swapped.
- to backup original ui, make a copy of this zip, open the copy with 7-zip, replace /system/app/systemui.apk and /system/framework/framework-res.apk with the CURRENT ones from your phone (adb pull them or something) then rename the copied zip originalUI.zip and put it on your sdcard, in case something goes wrong you can reflash it to go back to default.
- to install just flash the zip in recovery mode, do not wipe cache partitions, the android OS will update them when it sees changed files.
enjoy!!!!
p.s. i don't take responsibility for you breaking your phone.
if you aren't confident in moding these files, but you want something changed just post what it is and i'll do my best to provide you with a personal patch. if there is an icon i missed on the rom you use, let me know and i'll update. (many roms use differant icons)
- if this doesn't work with your rom you can request that i write one specifically for your rom and i may do it.
i do intend on adding other color versions of this so feel free to request colors.
this UI mod is intended to make the amazingly stable and battery friendly v20f a real option by making it pretty.
other additions i recommend are:
power toggles (has a homescreen widget that add's reboot menu with recovery option and bypasses reflashing on reboot by this i just mean a faster reboot by using a root reboot command instead of stock reboot which takes forever)
pocket skip track (allows you do add screen off track switching functionality to stock roms.)
mx camera (gives you hdr camera options without removing 1080p video capabilities like cm10.1)
apex launcher (jelly bean style launcher with lots of options)
exdialer ( a good free dialer with some really nice theme's i bought a payed one for 2 dollars or something that's black and blue)
MHL works on stock roms (micro usb -> hdmi -> tv)
the rom i recommend to run with this is
the legend Ho!No!'s v20f mod 2
http://forum.xda-developers.com/showthread.php?t=2185178
happy texting !!!
the other feature of this is it should theoretically run smoother than stock files due to less compression.
i will also be posting email.apk LGMms.apk LGCalendar.apk with some better black theme's
this mod is not new but i'm just trying to make a universal one for v20f now, i already have alot of happy users.
--added in 4.3 is standard black background with blue text (on title bar) for any apps or widgets that use default framework values, so far on mine it works for quite a few.
i don't think this will work on roms that aren't deodexed
Kronics BlueMod V5
V5.1 has a few divider fixes and the tab for slider panels/quicksettings in status_bar_expanded
the lockscreen is for pattern lock check attachment if u wanna see it
the screenshot for the quicksettings panel is from before the cyan color was fixed to neon blue
screenshot 16 is V4.3 the others are 5.0, in 5.1 the bottom tab color is fixed on screenshot 26
in 5.0+ BlueMod tag is removed i decided the average person probably doesn't want it.
in 5.1 the bottom bar in expanded panel color is fixed
- i did more work to framework-res to change more of the default backgrounds and font color's for 3rd party apps and such, there are a few system apps that i think have to be modded individually because it didn't apply for them, but you should see some of your apps starting to inherit the theme.
for the pattern lock mod, i disable the showing of the lines because it's extremely hard to mod, it's done in some equation in a smali file somewhere that is differant location on most phones, until someone that has a strong grasp of smali that uses LG phones takes a look i can't mod that
reserved for secondary files
if you want to learn to do your own mod's, or fix something i missed on your rom, the tutorial can be found here:
http://forum.xda-developers.com/showthread.php?t=2362717
Kronics BlueMod v5
This has only been tested on the rom with 4.2 framework v20f, if someone wants to try flashing it on a non updated framework v20f and let me know if it works that is cool, if not i'll do it when i get a chance, if u do it backup your original files to a flash first.
i already fixed the highligher on the bottom tab for settings panel that is slightly the wrong color (greenish) coming in next update
i'm currently investigating the issue that is causing long reboots on every reboot instead of the first one after install. it doesn't seem to be affecting system performance but i know that is probably annoying people so i'm looking into fixing it.
edit i wiped all drives and installed the rom without the mod and it was only 15 seconds or so faster boot, i think this rom just has a long boot (the 4.2 framework one)