Related
What is the best thinnest case for the samsung captivate!
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
I have tried three different cases and found that thr "Body Glove" seems to be the one I end up using the most. It is very thin, tight fitting and feels good while holding the phone. There are really several good choices around. This is of course IMHO.
Sent from my SAMSUNG-SGH-I897 using XDA App
i use the bodyglove case with the diagonal lines on the back. my brother uses the sedio one that snaps in 2 and has the smooth body. the body glove is a little thinner and looks more stylish. both are around 15-20 dollars. i prefer the body glove one because of the back actually, just adds a little touch to an otherwise plain looking phone. both are nice because they dont pick up dust and lint like the cheapo 2 dollar ones. you can tell quality by the seams of the rubber and smell. you get what you pay for. if your phone is worth 400, why spend 2 dollars on a case right?
fastkx450 said:
What is the best thinnest case for the samsung captivate!
Click to expand...
Click to collapse
How much protection are you wanting exactly?
Just picked up the Body Glove yesterday. Really like it, doesn't collect dust and very thin. Good fit also.
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Check these out. They are not as sticky as regular silicone skins and they are fairly thin + cheap.
http://cgi.ebay.com/WHITE-TPU-CASE-...137991?pt=PDA_Accessories&hash=item3cb26715c7
http://cgi.ebay.com/SMOKE-Crystal-S...139274?pt=PDA_Accessories&hash=item5d2d4f700a
http://cgi.ebay.com/BLACK-TPU-SKIN-...791504?pt=PDA_Accessories&hash=item415455ec90
http://cgi.ebay.com/ORANGE-TPU-SKIN...810059?pt=PDA_Accessories&hash=item19c287018b
6 for 11$
http://cgi.ebay.com/6-x-Color-TPU-G...296126?pt=PDA_Accessories&hash=item3f06a32a3e
http://cgi.ebay.com/2x-Tpu-Gel-Case...544565?pt=PDA_Accessories&hash=item5ade97c375
http://cgi.ebay.com/Red-TPU-Crystal...340454?pt=PDA_Accessories&hash=item19c2cc2266
Body Glove is pretty darn thin. I have one but I replaced it with the Otterbox Commuter, just to change things up. Commuter is a bit thicker but I don't mind it at all so I am sticking with it. I do recommend the Body Glove though. Good sleeve.
Plus one for body glove.
Its perfect. Smooth enough that it comes out of pocket easy, but grippy enuff that I can throw it on dashboard without it flying off with the first turn I make.
I also think it looks great, fits perfectly, and I can hold the phone without dropping it-which is the reason I wanted it in the first place
are you looking for a hard case or skin? body glove or a tpu skin is your best bet for the thinnest protection but if you want a hard case then check out Seidio innocase surface
I just got a Xmatrix case (I think its a knock off as its not rubberized anywhere) but the fit is great and gives you a near naked feel. Covers the back and adds a bit to the front edge so the screen does not touch a flat surface if you lay it face down.
MobileNick said:
Don't know what your parameter for "thin" is but I found the TPU cases from ebay to be the best. I had tried a BodyGlove case and a generic silicone case but found them too thick (the silicone case looked ugly too IMO - dull & attracted too much lint). The TPU case I got from ebay has been great - glossy yet grippy. Adds about a mm top & bottom.
Click to expand...
Click to collapse
I just ordered one of these today, sounds like a good one.
Amzer argyle for $4
Sent from my GT-I9000 using XDA App
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
jgc121 said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290487171195&ssPageName=STRK:MEWNX:IT
I just ordered this case - its the slimmest/nicest looking imho, I am currently using the otterbox defender case - which i like, its a bit on the bulky side, but does offer excellent protection - my only real complaint with it is that its a pain to get the the battery if needed - have to take the rubber off, then separate the case and remove the phone from it to gain access to the back cover...
Click to expand...
Click to collapse
Looks just like a TPU case which if you don't mind having a not as fancy case you can get the Amzer one on amazon for $5 shipped and the knockoff ones on ebay for about $3-4 shipped. But the case you linked to is one very nice looking case.
All nice looking cases. I may have to try the TPU out. Looks nice.
Sent from my SAMSUNG-SGH-I897 using XDA App
bay_wolf said:
http://www.amazon.com/gp/product/B003VQS43U/ref=oss_product
Cheap, looks good (can't really see the pattern except at a certain angle), protects great, and is the thinnest protective case I've seen.
Click to expand...
Click to collapse
+1
That Amzer case does it's job very well. It protects, looks good, thin and is subtle in a good way. The fact that it is now ~$6.00 makes it an absolute steal. I usually don't buy cheap stuff for my phone (or for anything for that matter) but this case performs like a $20 case.
Only issue I have with it is that mine seem to be less snug than it was when I first got it. I only take off my case when I have to do a battery pull so it's a bit surprising that it got loose so easily. I recently bought a Otterbox Commuter to replace this case because I was getting bored with it but I wouldn't say I changed because it was necessary; it was just cause I was bored and I found a good deal for it.
+1 for the xmatrix case. It's a hard case but very slim and is a good fit without any movement or shuffling. Plus, there is a minor lip on the front so you can rest it face down.
It snaps on in the back...just one piece.
Body glove for sure best slim streamline case
Sent from Serendipity 5.3 Captivate via XDA app
I like my phone to be protected really well.....Have a look
1. Official Samsung Flip Case
2. Cheap S-Curve TPU case from eBay --> I bought this extra CHEAP case so I can experiment and cut it to fit the Flip Case. It's not the best cutting job, but it will do the job for now
3. Home made Phone Sock
I guess I will use this set up until the flip case dies, by then I will start using the Nillkin TPU Case.
ps. I really like the Nillkin ones...they are thin and fits the GNote really well
Great job. I'm still waiting for my TPU case to arrive so I can try this. Instead of the sock, I'll try a tiny short strip of velcro to keep the flip shot.
DMax99 said:
I like my phone to be protected really well.....Have a look
1. Official Samsung Flip Case
2. Cheap S-Curve TPU case from eBay --> I bought this extra CHEAP case so I can experiment and cut it to fit the Flip Case. It's not the best cutting job, but it will do the job for now
3. Home made Phone Sock
I guess I will use this set up until the flip case dies, by then I will start using the Nillkin TPU Case.
ps. I really like the Nillkin ones...they are thin and fits the GNote really well
Click to expand...
Click to collapse
You beat me to it lol.
I was thinking about doing this, for the exact same reason as yourself. Just a quick question, does the cover fold all the way back like it would without the TPU case installed?
RavenY2K3 said:
You beat me to it lol.
I was thinking about doing this, for the exact same reason as yourself. Just a quick question, does the cover fold all the way back like it would without the TPU case installed?
Click to expand...
Click to collapse
yeah, it does. the cover can bend all the way down to the edge of the tpu cover.
just did something similar. cut side off the tpu gel case, stretched the gel case to fit the slightly thicker flip case back cover.
it works, but the tpu case loses some of its rigidity when you cut it, it wont stick as well to the phone.
Souai said:
just did something similar. cut side off the tpu gel case, stretched the gel case to fit the slightly thicker flip case back cover.
it works, but the tpu case loses some of its rigidity when you cut it, it wont stick as well to the phone.
Click to expand...
Click to collapse
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
tamarian said:
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
Click to expand...
Click to collapse
doing it that way would then cause the the flip cover to lose some durability.
by cutting the tpu case to fit the flip case as is, you still leave 1.5cm of gel case around the corners, which is enough for the phone to hold the case on. the only point of weakness lies in the flip case making the phone's rear thicker. by cutting one side of the tpu case and having to wrap it around a thicker phone will kinda distort the tpu case a little.
its not enough to make it fall off that easily, at least not now. but its not as rigid compared to tpu case uncut and i'd expect it to become a little loose with wear and tear.
Yo, sup dawg, I herd you like cases, so I put a case in your case so you can put another case while you using a case in a case.
tamarian said:
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
Click to expand...
Click to collapse
hehe...this is actually a good idea too...
victorlht88 said:
This is honestly quite retarded..
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
you do realize that a lot of cases out there are cases in cases, right?
For example OtterBox
DMax99 said:
you do realize that a lot of cases out there are cases in cases, right?
For example OtterBox
Click to expand...
Click to collapse
lol, for my motorola atrix, i had the ballistic hardcore case. you get the core plastic+tpu case with screen protector integrated, and then a silicone skin that can fit on the outside, and then a beltclip/screen guard. when you run the inner case and silicone skin together, the device is water-resistant.
but honestly, i dont see why people think what we're doing is silly.
the flip cover is good for protecting the screen, but doesnt protect the corners. protecting the corners is important because statistically, if you were to drop your phone, its 90+% more likely to land on a corner first than flat on its face. the vibrations of the drop are then going to transfer into the device's internals, which can do a bit of damage, hence you need protection for the corners.
the tpu case is good for protecting the device itself but offers no real protection from the screen aside from preventing it from getting damaged if it were to land flat face down. if your screen were to land on a corner of a table, you'd be screwed.
by combining the cases, you get the best of both worlds protection wise.
Souai said:
lol, for my motorola atrix, i had the ballistic hardcore case. you get the core plastic+tpu case with screen protector integrated, and then a silicone skin that can fit on the outside, and then a beltclip/screen guard. when you run the inner case and silicone skin together, the device is water-resistant.
but honestly, i dont see why people think what we're doing is silly.
the flip cover is good for protecting the screen, but doesnt protect the corners. protecting the corners is important because statistically, if you were to drop your phone, its 90+% more likely to land on a corner first than flat on its face. the vibrations of the drop are then going to transfer into the device's internals, which can do a bit of damage, hence you need protection for the corners.
the tpu case is good for protecting the device itself but offers no real protection from the screen aside from preventing it from getting damaged if it were to land flat face down. if your screen were to land on a corner of a table, you'd be screwed.
by combining the cases, you get the best of both worlds protection wise.
Click to expand...
Click to collapse
maybe because they are not poor like me
Souai said:
but honestly, i dont see why people think what we're doing is silly.
Click to expand...
Click to collapse
I'm with you on this, Considering I paid more for this phone than I paid for my Galaxy Tab 10.1 3G (coz I couldn't wait for it to be officially released lol) I'm gonna protect the hell out of this thing.
RavenY2K3 said:
I'm with you on this, Considering I paid more for this phone than I paid for my Galaxy Tab 10.1 3G (coz I couldn't wait for it to be officially released lol) I'm gonna protect the hell out of this thing.
Click to expand...
Click to collapse
i agree there.
about 6 months ago i bought my motorola atrix for $500. to me, spending $40 on a ballistic hardcore case is cheap insurance for a $500 phone.
and a few weeks ago i spent $800 on my galaxy note (now some places are selling it for $600), to me, $30 is cheap insurance to ensure it continues running well. although i would prefer another ballistic hardcore case, i dont think ballistic have any plans for the note.
Souai said:
i agree there.
about 6 months ago i bought my motorola atrix for $500. to me, spending $40 on a ballistic hardcore case is cheap insurance for a $500 phone.
and a few weeks ago i spent $800 on my galaxy note (now some places are selling it for $600), to me, $30 is cheap insurance to ensure it continues running well. although i would prefer another ballistic hardcore case, i dont think ballistic have any plans for the note.
Click to expand...
Click to collapse
yeah...there aren't that many good Case Company that have plans for our Note
I wish casemate would make a tough case for the note. I loved them for my gs and gs II. They had a thin flexible silicone sleeve that went around the phone then a hard outer shell that went around the silicone.
great freaking case.
I should be updating this post to Quadruple Protection...because I have just put the Skinomi Carbon Fibre Skin on it this Friday.
and I must say the skinomi skin is Great!
one particular advantage about the way i have it set up...
the friction of the tpu gel case means it doesnt slide, meaning i can use the flip cover as a stand.
Souai said:
one particular advantage about the way i have it set up...
the friction of the tpu gel case means it doesnt slide, meaning i can use the flip cover as a stand.
Click to expand...
Click to collapse
Nice....Is that the S-Curve TPU?
Do you find the unlock button hard to press?
http://www.ebay.com.au/itm/ws/eBayISAPI.dll?ViewItem&item=140637892999&ssPageName=ADME:L:OC:AU:1123
the case i bought was this one.
it is slightly harder to press the power button, but thats mainly because of the way im using the case. the phone is slightly thicker when you use the samsung flip cover, so the gel case has to be stretched a little. on the case, theres a slightly softer rubber/plastic gap for the power button which works well normally, but since the case is stretched a little, it is slightly off center for the power button. not enough to cause problems, but enough to notice a bit of a difference.
but overall, i'd say it works well. gel case + screen protector + flip cover = ready to take this thing when i go paintballing!
This is a quick mod i did about 2 weeks ago. Only takes about 5 or 10 mins... A samsung flip case with a Belkin case from BestBuy i cut with scissors to fit the flip case...
Link to Belkin case from BestBuy
http://www.bestbuy.com/site/Belkin+...kuId=5768143&st=galaxy s iii belkin&cp=1&lp=2
Link to Flip Case
http://www.amazon.com/Flip-Cover-EF...43005453&sr=8-2&keywords=galaxy+s3+flip+cover
Pics Below...
It looks great. Thanks for sharing.
So you have a case, over a case?
Lots of protection there.
Bielinsk said:
So you have a case, over a case?
Lots of protection there.
Click to expand...
Click to collapse
Well the flip cover provides zero protection but looks nice lol. Then add in the belkin caseand you got yourself a nicely protected case.
Lmao yes i have "case with in a case" Just a bit of inception going on...
But yeah the flip case protects your screen so you dont have to put a nasty screen protector on it. The belkin is a very thin hardcase that protects the back and sides of the phone.
Looks nice. On the fence about the flip lid case. I typically go bare with my phones.
I currently have the ballistic SG case and was wondering if you guys would recommend any other cases out there?
Sent from my SGH-T989 using Tapatalk 2
I have a balastic case with fly grip. Awesome!
Simple TPU case (black) from eBay works for me.
I am using the CIMO S-Line TPU Case. It looks nice and it protects my phone.
Sent from my SGH-T989 using xda premium
I would say the D30 cases from t mobile. Bought one of amazon for $10, Fits like a glove and protects pretty good.
http://www.amazon.com/T-Mobile-Slee...=UTF8&qid=1349363353&sr=8-3&keywords=D30+t989
I'm currently switching between the white body glove case from T-Mobile and the PDair leather case. I really like the leather case cause it protects my screen.
dia_naji said:
I would say the D30 cases from t mobile. Bought one of amazon for $10, Fits like a glove and protects pretty good.
http://www.amazon.com/T-Mobile-Slee...=UTF8&qid=1349363353&sr=8-3&keywords=D30+t989
Click to expand...
Click to collapse
D3o cases are junk. Especially the ones with the softish plastic backing. The all black one piece is alright,but still junk.
The ones with the colored plastic backing are prone to cracking just be taking off the case. Big no-no since I wash my case periodically.
On top of that, the 3.5mm slot is too small. Only slim jacks fit while the d3o case is on. I'm not willing to change my Sennheisers just because design flaws of the case.
Don't forget how much force it takes to push the power button. Over time,this can damage the power button by recessing it in. I switched to the white body glove. Its properly designed and does what I need it do.
ralphie1267 said:
I have a balastic case with fly grip. Awesome!
Click to expand...
Click to collapse
i have a case similar to this, one of the amazon variants.
any who i really like the design, especially the thick corners which is what many times takes the impact of the drop. i have not had problems with screen bubbling up either
I purchased the white body glove case from tmobile store and its doing the job. I've dropped the phones a couple of times already, and its still doesnt show any scratches unless your eyeball is touching the case.
I got one from moster accessory website called the black transfusion hard cover case an I really like it as my second case. My first case was the D30, but the transfusion case was more cheaper than the d30.
http://www.amazon.com/Diztronic-Fle...349490267&sr=8-1&keywords=diztronic+galaxy+s2
I tried 3 cases, this is the best
Because I use a holster, went with the Seidio Active.
bhowanidin said:
Because I use a holster, went with the Seidio Active.
Click to expand...
Click to collapse
I came upon an older Targus holster for Palm PDAs back from 2000. Its got that old brown leather look with a velcro snap and velour interior padding. Enough room for my Herc wrapped in its TPU.
Xeroday said:
http://www.amazon.com/Diztronic-Fle...349490267&sr=8-1&keywords=diztronic+galaxy+s2
I tried 3 cases, this is the best
Click to expand...
Click to collapse
+1
Sent from my SGH-T989 using xda premium
I should be receiving my new device next week :laugh:and I can't decide what case to pickup.
I use a magnetic phone mount in my car so I will have to put the magnetic plate between my device and the cell phone case. That being said anything with a transparent back is out of the question. If the case has legs it would be ideal as well. I work at a desk all day and I would rather not have it wobbling around if I'm trying to use it while it's on my desk.
I have used a UAG case on my S5 for the past two years and I was very happy with it. Right now I'm considering the TUDIA Slim-Fit HEAVY DUTY [MERGE] Extreme. Any other suggestions would be greatly appreciated.
Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?
ffejeroni said:
Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?
Click to expand...
Click to collapse
That's a good point. I guess we will find out soon enough!
The TUDIA case I mentioned above is a 2 piece case so I was planning on putting the metal place between the two parts of the case that way the metal plate doesn't have to physically touch my device.
Otherwise I'm probably going to at the very least place a small piece of paper between the metal plate and my device to prevent it from scratching the rear of my device.
Aluminum generally isn't magnetic, and I'd be slightly afraid to put a magnet right onto the phone and risk damaging some internals. I'm going with the Spigen Neo Hybrid, and will likely put the plate on the phone itself as well.
I have ordered these two. Always used spigen on my devices. Also ordered a full tempered glass protector. After reading on the protector its compatible with case's. Screenshots attached for easy reference.
Generally I prefer clear case and put some good pictures on the back.
all oneplus3 accesories are compatible just goto oneplus3 forum and check it out
ffejeroni said:
Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?
Click to expand...
Click to collapse
Aluminium is not magnetic ...
Anybody uses dbrands.....
I found them very cool but i don't know if it's easy to apply them......
I ended up ordering the Spigen Neo Hybrid as well. I will let you guys know it fits with the metal place once I receive it next week.
cultofluna said:
Anybody uses dbrands.....
I found them very cool but i don't know if it's easy to apply them......
Click to expand...
Click to collapse
I watched a YouTube video and they made it look like a breeze. But to get it perfect I think would be very difficult and stressful. But when successful it's well worth it in my mind. One imperfection would just flip me out
LMcR92 said:
I have ordered these two. Always used spigen on my devices. Also ordered a full tempered glass protector. After reading on the protector its compatible with case's. Screenshots attached for easy reference.
Click to expand...
Click to collapse
Let me know if the screen protector fits.
Already have the spigen case, just not sure if it works with the curved screen protector.
I went for OnePlus 3/3T Karbon Case. Really liking it. Also had ebony wood and sandstone case for tests. Ebony wood simply would not fit, however sandstone was very bulky in comparison to Karbon Case + I don't like how the sandstone feels in hand.
jemeljsh said:
I went for OnePlus 3/3T Karbon Case. Really liking it. Also had ebony wood and sandstone case for tests. Ebony wood simply would not fit, however sandstone was very bulky in comparison to Karbon Case + I don't like how the sandstone feels in hand.
Click to expand...
Click to collapse
I got the ebony case for the 3T and not liking it. It's kind of hard to grip with the case on, sharp edges everywhere. I'm using it without a case now which is much comfortable and grippier. Don't know how much pain it's returning the case back for refund but will try that and look for a different case.
Sent from my ONEPLUS A3000 using Tapatalk
I have a friend who bought and likes the Spigen Neo Hybrid case, and I bought the OtterBox. I personally prefer the OtterBox, but the Neo Hybrid case looks pretty nice too.
Picked up the Cruzerlite Spartan case for my 3T. Got it yesterday and seems like it'll be a good rugged case. It's also not to thick. Get to try it when the phone finally gets here tomorrow.
Edit: posted the onepluse2 case but they do have it for the 3T also.
kirdroid said:
I got the ebony case for the 3T and not liking it. It's kind of hard to grip with the case on, sharp edges everywhere. I'm using it without a case now which is much comfortable and grippier. Don't know how much pain it's returning the case back for refund but will try that and look for a different case.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I usually go without cases but with the camera bump on 3T it makes me too cautious when putting down the phone on the table. Original Karbon Case does not create too much bulk as its quite slim and in the same time it does protect the camera and actually it has bumps on the front (corners) so you can put it face down too and not worry about scratches.
I bought Ringke Fusion. Awesome case. It has nice clicky buttons.
https://www.amazon.com/OnePlus-Ring...=1480301837&sr=8-1&keywords=ringke+oneplus+3t
I have my Neo Hybrid in hand, but phone won't be here until tomorrow. I'll try to give impressions/photos.
GiSS88 said:
I have my Neo Hybrid in hand, but phone won't be here until tomorrow. I'll try to give impressions/photos.
Click to expand...
Click to collapse
I ordered that one too but not available to me till 2nd of December so I have this till then.