Develop Bugs

[Q] Overclock Galaxy Y (2.3.6 Gingerbeard) (Rooted)

Hello everyone I rooted my phone but I also want to OC it but I must be sure it will not brick my phone etc...
The link I found is this: freshnewsarea.com/tricks/overclock-samsung-galaxy-y-to-900-mhz/
Is this safe to do and is it compatible with 2.3.6 Gingerbread ?
Thanks In advance (sorry for the stupid questions but I don't want to brick my phone as my Dad would be very mad at me)

look here:
http://forum.xda-developers.com/showthread.php?t=1550065
post number #3 at this moment im using this kernel V0.7.50 RC 20
and app for ovc use NO FRILLS CPU

thanks for replying but I see that custom kernel is still in beta stage so it can be buggy isn't it ?

Yes it can be. But there are a lot of users out there with the kernel. Just follow the instructions and flash it using one of the many methods. You can only OC it to 900 MHz though. 1 Gz is too buggy.

High00 said:
look here:
http://forum.xda-developers.com/showthread.php?t=1550065
post number #3 at this moment im using this kernel V0.7.50 RC 20
and app for ovc use NO FRILLS CPU
Click to expand...
Click to collapse
I tried this kernel but the oc is not working.. its only display 900mhz but when I try to use antutu, 500mhz hot the highest svore
Sent from my GT-S5360 using xda premium

Nervermind

High00 said:
look here:
http://forum.xda-developers.com/showthread.php?t=1550065
post number #3 at this moment im using this kernel V0.7.50 RC 20
and app for ovc use NO FRILLS CPU
Click to expand...
Click to collapse
Thats where this thread should have been closed!

[DEV][SYSTEM DUMP]Nexus 7 System Dump[ONLY DEVS]

Hello I would like to tell you there is a nexus 7 system dump available. Maybe this is needed to port JB to our devices.
NOTE THIS IS NOT FOR FLASHING!! THIS IS NOT CONFIGURED FOR THE ONE X! SO DON'T BE DOUCHE!
Download
Good luck! (Devs)

nvm

Please do not open more and more Threads!
We have a SDK Port Thread that should be enough until we get the Sources!
http://forum.xda-developers.com/showthread.php?t=1737736
Regards

the|gamer said:
Please do not open more and more Threads!
We have a SDK Port Thread that should be enough until we get the Sources!
http://forum.xda-developers.com/showthread.php?t=1737736
Regards
Click to expand...
Click to collapse
correct me if im wrong but the nexus 7 base is a much better base than the SDK mainly because it runs off the same Tegra 3 chip as our OneX so the majority of the libs/modules will be ready for straight use on our device

bagofcrap24 said:
correct me if im wrong but the nexus 7 base is a much better base than the SDK mainly because it runs off the same Tegra 3 chip as our OneX so the majority of the libs/modules will be ready for straight use on our device
Click to expand...
Click to collapse
You're right IMO, thanks.

You dont get it right?
We are working with a Nexus 7 Dump in that thread... but we dont need 1000 Threads with the same results...

Download speed is terrible. 27.4kb/s
Is there a any mirror?

CM10 Ported - Testers Needed - New Build 3

Since People are insisting me to post the link on the first page, I'll do it.
Note
- Only for testing purpose
- Will post it in the Development section , only after it boots successfully
- Please don't ask Why doesn't it Boot ... blah... blah..
- Please provide a Logcat
Build 1 - Not working, Kernel Problem
Build 2 - Not Working, Build Problem
Build 3
Changelog:
(Build 1) Ported from Galaxy MINI
Added White's Kernel 0.9 and 1
(Build 2) :-
Added necessary Jelly Bean files
Replaced White's Kernel with Merruk 2.5
(Build 3) New Port :-
Ported from Galaxy Nexus
Installation Method:
Install Merruk's kernel on stock rom via this method
Boot to CWM
Mount System
Wipe Data
Install Zip
Reboot
# I'm unable to provide a logcat, so if someone manages to flash the Rom (Build 2) , please do provide a logcat

s5360?
Sent from my GT-S5360 using xda premium

Gt-s5360
Sent from my GT-S5360 using xda premium

Gamer R said:
I've ported CM10 from Galaxy Mini to our device. I need testers. First 5 who have replied will be able to test it (need a Dev not a Noob). I'll send a PM. I'll not release until fully tested.
Credits goes to WhiteXP for his kernel
Click to expand...
Click to collapse
Wht hapnd to your ics port? Droped or wht.?
Anyway hope u will suceed
send from Gods Own Country........

Where is the link..i need to test
Sent from my GT-S5360 using xda premium

I try many rom
now want to test it
cm10
I really want to test it

Dude.. waiting for test

Great...
Gamer R --->CM10
WhiteXp --->CM9
Nanosurfer ->CM7
and galaxy young wiil be a great dev's,.....thank's to all dev
I hope we can use CM
Sent from my GT-S5360 using xda app-developers app

Everyone is stuck at graphics bug.... Lol
Anyways good luck Gamer R...
This message is COPYRIGHTED to me and stolen from:My post

Why can't everyone work at one build at a time??? We can at least get one CM ( with the drivers ofcourse) sad but good luck...
Sent by a Payphone

zach too is working on CM10 for the device,
anyways,
we arent going anywhere until we get configs for GPU

if u really port it & it boot than i will test it

jaison thomas said:
Wht hapnd to your ics port? Droped or wht.?
Anyway hope u will suceed
send from Gods Own Country........
Click to expand...
Click to collapse
Yup i dropped my ICS port coz it didnt work. I was trying to make it from source (KANG) but adb didnt work. So I got frustrated and uninstalled my Ubunt along with the source.
shoutokuyaki said:
Great...
Gamer R --->CM10
WhiteXp --->CM9
Nanosurfer ->CM7
and galaxy young wiil be a great dev's,.....thank's to all dev
I hope we can use CM
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I'm less of a dev. Real heroes are Whitexp , Nano and Motafoca :good:

maxsan20 said:
if u really port it & it boot than i will test it
Click to expand...
Click to collapse
If it boots then well and good :victory:
I've already selected few testers. Waiting for their feedback.
I could have tested but my Galaxy Y isnt working. IC circuit shot.
So I'm using Optimus Black for the time being

WoW it booted...
Showed cm10 lockscreen
Apps work...
Ui is awesome....
Had no issues...
"in my dream"
Thanks...
PS doing take it seriously....

Wish I could test it but I have 2 ongoing projects on my head. Can you put the link on first post?

Please post the link....
We are waiting to test it....
Respect devs. I Love my galaxy y because of them.....^.<

Gamer R, did you try source from Galaxy Pocket Duos (this probably have the same gpu and have ICS)?

kael2404 said:
Gamer R, did you try source from Galaxy Pocket Duos (this probably have the same gpu and have ICS)?
Click to expand...
Click to collapse
Its support official ics ?
Sent from my GT-S6102 using Tapatalk 2

kael2404 said:
Gamer R, did you try source from Galaxy Pocket Duos (this probably have the same gpu and have ICS)?
Click to expand...
Click to collapse
Galaxy Pocket Duos source is incomplete. I'll try it after a week or so after my broadband's subscription gets renewed.

Ported Ubuntu Touch to Samsung Galaxy S GT-I9000.

Possiamo stare tranquilli, anche noi avremo ubuntu su questo catorcio a carbone
are not the developer
but only an intermediary
Yesterday I ported Ubuntu Touch to Samsung Galaxy S GT-I9000.
Build is here:
Mirror 1: http://ubuntuone.com/0aGhALmE950fNzSn5Tp8vg
Mirror 2: https://docs.google.com/file/d/0B2am7h6Tso0TVGo0M1dWMHBkZXc/edit?usp=sharing
I've pushed code changes to github so you can build without patching stuff:
https://github.com/ali1234/android_device_samsung_aries-common
https://github.com/ali1234/android_hardware_samsung
https://github.com/ali1234/android_kernel_samsung_aries
Simple instructions for building+installing are here:
http://al.robotfuzz.com/~al/random/ubuntu-touch-galaxysmtd.txt
Thanks to +Ricardo Salveti for lots of help getting this working. It took me about 12 hours from start to finish (not including repo sync time). I have never used CyanogenMod or built an Android ROM before, so I think this is pretty good, and it says a lot about what can be done when using Android effectively like a HAL - without having to actually know or care anything about Android.
The porting process was really simple once I understood what I was doing. The phablet system is a cut-down Android with Dalvik etc removed, and the hardware adaptations we are bringing over from CyanogenMod try to build Dalvik runtime applications. This stuff has to be stripped out from the HW adaptations. That's really all I had to do to get this working, and if you look at my repos above you'll see that all I did was comment out lines in Makefiles which try to build this type of stuff. There were a couple of other trivial changes needed too. All in all only about 20 lines changed.
http://www.youtube.com/watch?v=AqGhB0yJjhw
original posted https://plus.google.com/u/0/117474986382867317779/posts/XNRMvFJCBzt

Please speak English that's the rule here. Thanks
Sent from my GT-N7100 using xda premium

ugoms said:
Please speak English that's the rule here. Thanks
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Some

Thanks for your work is data and gsm working?
Sent from my GT-N7100 using xda premium

ugoms said:
Thanks for your work is data and gsm working?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
are not the developer
but only an intermediary

As far as i know, ubunto ports currently use a pre-alpha version for developers, i read that camera works, gsm (not 3g/4g/cdma), touchscreen, speaker (not headphone..), most apps do not work as well.. i would suggest to wait a bit for this to get out of alpha to some more user friendly version.

R: Ported Ubuntu Touch to Samsung Galaxy S GT-I9000.
What doesn't works??
Phone: Samsung Galaxy S1 GT-I9000
Rom: various roms android 4.2.2

francodapalermo said:
Possiamo stare tranquilli, anche noi avremo ubuntu su questo catorcio a carbone
are not the developer
but only an intermediary
Yesterday I ported Ubuntu Touch to Samsung Galaxy S GT-I9000.
Build is here:
Mirror 1: http://ubuntuone.com/0aGhALmE950fNzSn5Tp8vg
Mirror 2: https://docs.google.com/file/d/0B2am7h6Tso0TVGo0M1dWMHBkZXc/edit?usp=sharing
I've pushed code changes to github so you can build without patching stuff:
https://github.com/ali1234/android_device_samsung_aries-common
https://github.com/ali1234/android_hardware_samsung
https://github.com/ali1234/android_kernel_samsung_aries
Simple instructions for building+installing are here:
http://al.robotfuzz.com/~al/random/ubuntu-touch-galaxysmtd.txt
Thanks to +Ricardo Salveti for lots of help getting this working. It took me about 12 hours from start to finish (not including repo sync time). I have never used CyanogenMod or built an Android ROM before, so I think this is pretty good, and it says a lot about what can be done when using Android effectively like a HAL - without having to actually know or care anything about Android.
The porting process was really simple once I understood what I was doing. The phablet system is a cut-down Android with Dalvik etc removed, and the hardware adaptations we are bringing over from CyanogenMod try to build Dalvik runtime applications. This stuff has to be stripped out from the HW adaptations. That's really all I had to do to get this working, and if you look at my repos above you'll see that all I did was comment out lines in Makefiles which try to build this type of stuff. There were a couple of other trivial changes needed too. All in all only about 20 lines changed.
http://www.youtube.com/watch?v=AqGhB0yJjhw
original posted https://plus.google.com/u/0/117474986382867317779/posts/XNRMvFJCBzt
Click to expand...
Click to collapse
Grande!! Anche pawitp ha fatto un porting di ubuntu, ma ha ancora dei problemi.
Great! Pawitp also made an ubuntu porting, but he has some problems (with signal).
big up!

Is that XDA forum?
Sent from my GT-I9000 using xda app-developers app

Im unable to init and clone phablet repo.
Can anybody help me?

Thread Cleaned.
All post that were only Italian have been deleted. It is required by the rules that you include at least a translation below the post.
@OP, please add a translation below your first sentence. This is required.
Besides that, nice work! :good:
~ The-Captain

do i need the phablet repo if i'm going to flash this zip without building?...

DEAD or ALIVE?
@francodapalermo
Is this thread DEAD?

any informations about update?
Sent from my GT-I9000 using xda app-developers app

bobo1337 said:
any informations about update?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
It will be no updates because of nobody works on this rom

-Tex- said:
It will be no updates because of nobody works on this rom
Click to expand...
Click to collapse
actually it is https://wiki.ubuntu.com/Touch/Devices/galaxysmtd
Sent from my GT-I9000 using xda app-developers app

can u pls help in making this port for samsung galaxy s duos because uve already done it and our devices are pretty same u know may be u can help

I hope there will be a stable version on the way?
Sometimes I use Ubuntu on my PC, I like it really bad.
But on my old good Samsung? Can it be?
Now, VanillaRootbox works and works last but not least for some month. I think for 1 and a half Year, terrible stable.
Sending by Xda-P. from my Gt-i9000 with VanillaRootbox by AWAYS. Andro 4.2.2 (the most stable Rom I ever had)

thepurepunjabi said:
can u pls help in making this port for samsung galaxy s duos because uve already done it and our devices are pretty same u know may be u can help
Click to expand...
Click to collapse
Not the same device cortex a5 vs hummingbird

u mean its not possible
???

Drivers Mali-400

At the outset, I'm sorry for the poor translator google .
Is it possible to update the drivers Mali-400 Ace 2?. From what I know Ace 2 has driver version r3p1-04rel0, while newer drivers appeared r4p0-00rel0 from last year. I know that the custom ROM for Xperia P or U, been updated drivers Mali-400 is why Ace 2 would not have the newer, since it is virtually the same smartphones?

YelloneK said:
At the outset, I'm sorry for the poor translator google .
Is it possible to update the drivers Mali-400 Ace 2?. From what I know Ace 2 has driver version r3p1-04rel0, while newer drivers appeared r4p0-00rel0 from last year. I know that the custom ROM for Xperia P or U, been updated drivers Mali-400 is why Ace 2 would not have the newer, since it is virtually the same smartphones?
Click to expand...
Click to collapse
Try it and report ...
Btw i saw in one SGS+ thread that taking the drivers from another samsung phone which has same GPU but newer driver ( bcz the phone itself is newer than sgs+) and replacing that file which is the driver , it gives +300 points in antutu , so in 3D test from 30fps to 50fps....
If the thing that you are trying to do , results succesfully , we will be able to play RR3 or sth.

OC, possibility of changing the drivers to newer ones. Its going better and better, our Ace is getting second childhood
@up
I agree, it`d be nice if sb here try it (sb who know how to do it ofc.)

Does anybody taken this project? It get recede to the background or its just abandoned?

artur1131 said:
Does anybody taken this project? It get recede to the background or its just abandoned?
Click to expand...
Click to collapse
Kyrillos13 was working about it, he told that would try... But now he isnt speaking about it. So ask him, maybe he would say you something interesting (Sorry for bad English) .

lanki113r said:
Kyrillos13 was working about it, he told that would try... But now he isnt speaking about it. So ask him, maybe he would say you something interesting (Sorry for bad English) .
Click to expand...
Click to collapse
he may be busy :/