Develop Bugs

USB Charging But No Data?

Hey, guys. I am pretty much feeling like this is a broken USB port, but here is a quick run down.
Flashed up to an EG22 based ROM a while ago, and flashed the modem via odin. This was a WHILE ago. And have flashed a few roms since then.
Soooo, here is my dilemma: Somewhere along the lines, I have lost any kind of data connectivity. Charging works fine, and I have tried this on a few other cables (stock, and a Western Digital external hard drive cable, and one 24 dollar cable from radio shack - i was desperate).
So, I am figuring that this is a bad USB port. Stupid. In order to do an insurance claim and get a new phone (thinking about going to a Nexus S 4G, since it is this phone's "equivalent"... I think) I have to have this thing back on an EC05 modem, or else I bite the cost of the phone.
any ideas, guys? I did QBKing77's full reset trick, still on EG22. That was my last effort after flashing a bunch of different ROMs.
Thanks again!

Sprint won't care if your rooted. I bet they wouldn't even check it in the first place. Take it in. But first, get something really small (q-tip) and put some alcohol (isopropyl) and clean out the port with the phone turned off. This is a galaxy s problem, happens

There is currently no way to change your modem from anything other than EB13 without Odin or Heimdall. Sorry. Just bring it in.

ugothakd said:
Sprint won't care if your rooted. I bet they wouldn't even check it in the first place. Take it in. But first, get something really small (q-tip) and put some alcohol (isopropyl) and clean out the port with the phone turned off. This is a galaxy s problem, happens
Click to expand...
Click to collapse
Care to explan this a little more I'm down to clean my phones port, fr all I know it might make it better.
Sent from my SPH-D700 using xda premium

Sorry, I can't. I read a while back someone posted how to do it. Dont remember where
sent from my cm7-ified epic

Thanks, guys. Definitely appreciated on the feedback.
Looks like I am going to go to the Nexus

ugothakd said:
Sorry, I can't. I read a while back someone posted how to do it. Dont remember where
sent from my cm7-ified epic
Click to expand...
Click to collapse
Ah I see ill look around then thanks!
Sent from my SPH-D700 using xda premium

I had the sameeee exact problem and did everything I could but my phones usb port was just broken lol
This is what I did
there is a rom that will make ur phone look like stock ec05
Its over here in the development section look for something like "stock ec05 refs rom" or something like that
But the thing iss that I was stuck on eh17 no eg22
But that rom worked for me
I'm not sure if it'll work on eg22 but hopefully it will just download it on ur phone and flash it and just give it back it'll look completely stock
Sent from my SPH-D700 using XDA App

I'm having almost the same issue here, as my phone can charge through the USB, but it won't detect it as mass storage mode (debug mode run well, though..)
I can run usb tethering too, but only the mass storage mode doesn't work..
I have try using another cable, going to other ROM, but still no effect, and now I'm using a card reader to read my SD card, which is quite lame.. -_-

Please help????

my phone wont start again after i flashed that Rom, its for Gt-I9100 International version, they phone wont boot at all, and when i plug it to the usb the computer ask me to install: QHSUSB_DLOAD.
Please any help

Can u get into dl mode
Sent from my SGH-T989 using xda premium

Also this should be in general
Sent from my SGH-T989 using xda premium

no deosnt boot at all ?????

People would be more likely to help you if you posted in the correct place.
Sent from my SGH-T989 using xda premium

You flashed an i9100 rom?!!?! I'm blown away. Why...why...why? Why in god's name would you do that? We have completely different hardware, of course your phone won't boot. Dude...
~EDIT~
There's a really good chance you're hard-bricked.
As a warning to other people out there who are just starting to do this stuff. DO NOT THINK THAT BECAUSE YOU HEARD SOMEWHERE THAT IS IS EASY THAT YOU CAN DO IT WITHOUT READING OR LEARNING ANYTHING. We here at XDA are all for helping people but this OP clearly did not read about flashing, read about what our phone is compared to the international version, or even do a search before posting this because then he would know how to attempt to get it into download mode and odin new firmware onto the device. We're not your personal, 24-hour tech support. If you want that, do not expect us to do it for free. If you genuinely want to learn about things and want someone to teach you how to fix something you did wrong, we'll be happy to do that. I'm going to repeat this one more time for effect:
We are not your personal, 24-hour/7-days-a-week, free tech support.

Yea. Im not gonna preach because i bricked my first phone yesterday :/
But its very important we dont flash software from other phones. This phone is different than any other Samsung and GS2 out there. You can often recover a phone if you flash the wrong rom, apparently that will not be the case on this phone..
If you cant get into recovery or dl mode theres no chance of a recovery. Sorry. Recovery can be accessed by pulling the battery, putting it back in, holding volume up and down and power all at the same time. Release the power button while continuing to hold both volume buttons ONLY if the samsung logo pops up. If nothing, try dl mode. That is done by pulling battery, putting it back in. Hold volume up and down while inserting the usb cord. If it does nothing your pretty much sol.
Sent from my SGH-T989 using XDA App

this is my first android phone and you best believe that i would rather be put in a sweat box with 10 sumo wrestlers and have to clean and floss some ass before I flash add rom or anything else that has to do with rooting this phone that didnt have t989 in it or that wasn't confirmed by plenty of devs... just saying dont really understand how someone thats been a member for over a year and has cleary had years of exp with andriod phones would do this..... unless hes about 13 yrs old and wanted to run around his school saying i got mine rooted i got mine rooted..

mikeyinid said:
Yea. Im not gonna preach because i bricked my first phone yesterday :/
But its very important we dont flash software from other phones. This phone is different than any other Samsung and GS2 out there. You can often recover a phone if you flash the wrong rom, apparently that will not be the case on this phone..
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
How did you do that? I want to make sure I don't do the same thing when I root or flash a rom

You are hard bricked. Needs a non existent jtag to repair. Pray that connexion learns to unbrick them.
Also, WHY???? Please click on the word friend in my signature.
Sent from the Galaxy, 2 stars to the left.

alibox87 said:
my phone wont start again after i flashed that Rom, its for Gt-I9100 International version, they phone wont boot at all, and when i plug it to the usb the computer ask me to install: QHSUSB_DLOAD.
Please any help
Click to expand...
Click to collapse
Dude....., there is good chance you hard bricked your phone your only option is (JTAG).
http://mobiletechvideos.mybigcommerce.com/

I flashed a kernel using the mount point for epic touch. Not sure which partition it actually flashed to but as soon as it flashed the phone shutdown and wouldnt do anything. Part of trying to get things going here we now know the right partition to flash a kernel too just working on the path.
Jjday7 said:
How did you do that? I want to make sure I don't do the same thing when I root or flash a rom
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App

Idk if someone already mentioned this but try this:
1.Pull battery out
2.Download Odin 1.85 or above
3.Install drivers
4.Open Odin.exe
5.Put your battery back in to the phone
6.While holding both volume keys, plug the USB in and if your phone goes into.download mode then you are set and can pick up all the stock stuff and flash it via Odin.
And if that doesn't work then you will need a jig to get into download and I dnt knw if someone had made one yet or not.
alibox87 said:
my phone wont start again after i flashed that Rom, its for Gt-I9100 International version, they phone wont boot at all, and when i plug it to the usb the computer ask me to install: QHSUSB_DLOAD.
Please any help
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App

Ouch
Sent from my SGH-T989 using XDA App

Goodluck.. I had my first hard brick long time ago when I flashed my moto razr with the firmware for moto razr v3i.

this is rhetorical by why even reply to someone's stupidity its plain and simple all it takes is a little bit of ****ing reading! jesus christ! topics like this annoy the crap out of me and should be deleted ! im not cool with helping someone that doesn't help themselves first sorry !

I wouldn't be so quick. Difficult and unexpected situations happen to all of us I am sure.
From the original post, I think OP may have an international version of the SGS2, and flashed the T989 Rom. He's just looking for a way back.
goldeman said:
this is rhetorical by why even reply to someone's stupidity its plain and simple all it takes is a little bit of ****ing reading! jesus christ! topics like this annoy the crap out of me and should be deleted ! im not cool with helping someone that doesn't help themselves first sorry !
Click to expand...
Click to collapse

i understand that! ive bricked a phone because i DIDNT READ. and even then i still didnt make a topic of it ... i tried every way possible to recover, when that didnt work i took the phone back. Seriously if you can type you can obviously read. trust me it helps.

USB jig question

Maybe a stupid question but I ordered a jig and haven't received it yet but how would I check if it works to leave positive feedback.. I'm stock rooted with Odin no custom recovery.... Would I just turn the phone off take the battery off put it back in and connect the jig? If it goes to download then it works?
Sent from my SPH-D710 using xda premium

Power down the phone, plug in the jig, turn on the phone. It shoudl go into ODIN download mode directly and say something about stats being reset. If it doesn't do the latter, you are probably on a new bootloader and it isn't the fault of the jig.

Turn the phone off, take the battery out for about 15 seconds, put the battery back but leave the phone off. Put in the jig and in a few seconds you should be at the download screen and the download count should say it has been reset.
Sent from my SPH-D710 using XDA

dante32278 said:
Turn the phone off, take the battery out for about 15 seconds, put the battery back but leave the phone off. Put in the jig and in a few seconds you should be at the download screen and the download count should say it has been reset.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
And from there, are you free to just turn the phone back off by taking out battery?

You don't need to take out the battery. Just press and hold the power button until it resets.

Thanks for the quick reply, I bought one in the event I get a brick and need to take it to a store. Oh and it will still work if im on an FC07 leak right? Or will it only work with GB roms, kernels?

It will work with the ICS ROMs as long as you have the original (EG30/31) bootloader. If you flashed the raw leaked tar from Samsung/Sprint, then the reset of flashing data might not work (but it should still put you in ODIN D/L mode). If you flashed one of the ODIN OneClick packages I put together, then all the features will work.

Ok I think Ill be good to go then because Ive always waited til Calk puts up a stock rooted version, not flashing the tars. Anyways while I kind of have you here, I was just wondering if this type of stuff has anything to do with our phones our might show up in the future and which type does our phone use, if any. heres the link http://forum.xda-developers.com/showthread.php?t=1387334 I was rooting my dads Epic 4G so I kept on seeing it in the thread titles. Just curious

rsalinas1 said:
Ok I think Ill be good to go then because Ive always waited til Calk puts up a stock rooted version, not flashing the tars. Anyways while I kind of have you here, I was just wondering if this type of stuff has anything to do with our phones our might show up in the future and which type does our phone use, if any. heres the link http://forum.xda-developers.com/showthread.php?t=1387334 I was rooting my dads Epic 4G so I kept on seeing it in the thread titles. Just curious
Click to expand...
Click to collapse
I didn't read that thread very closely, but MTD is sometimes an overloaded term and could mean different things to different people.
If used to compare flash memory types, we actually have eMMC rather than MTD. eMMC memory are block devices. MTD devices are similar to but not really block devices so they created a new category in the kernel to deal with them.
To get an idea about MTD, read this post:
http://www.linux-mtd.infradead.org/faq/general.html

Not that technical in Linux lol but thanks I will still give it a read. Bottom line of that thread made it just seem like MTD is a huge thing and makes the epic 4g a much better phone versus BML. Oh and it just said that they are types of partition maps, mtd being open and bml being closed source.
Sent from my SPH-D710 using Tapatalk

rsalinas1 said:
Not that technical in Linux lol but thanks I will still give it a read. Bottom line of that thread made it just seem like MTD is a huge thing and makes your phone better versus BML, whatever that is lol.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Ok, I read the thread a little more closely.
It seems the 2 main benefits from switching to the kernel supporting MTD partition format over the stock BML are you can resize the partitions easier and use ext4 (because those new kernels support ext4)
Our kernels already use ext4. w/r/t resizing partitions perhaps some people need more space in /data but most people seem to be ok with it.
It is always nice to have more options, but there is probably less demand for it on this phone than Epic.

I gotcha, maybe we will see it once our devices get older and we need something new lol. So just asking again now that you've read more closely, our phones dont use either of these partition maps correct?
Sent from my SPH-D710 using Tapatalk

I'm actually not sure which partition map we are supporting. I initially read the thread as MTD vs eMMC memory technology, which is different than the purpose of that thread.

I see, maybe you can figure that out for us in your spare time lol (if it really even makes a difference.) The E4GT is a beast of a phone anyways lol.
Sent from my SPH-D710 using Tapatalk

Just an FYI:
I got my jig and put it right in the slot while my phone was still on... it shut down my phone and put it directly into download mode and showed that my counter had been reset.
On a side note, for what ever reason, my GPS started working when I restarted the phone. It hadn't been working for days.

rsalinas1 said:
Thanks for the quick reply, I bought one in the event I get a brick and need to take it to a store. Oh and it will still work if im on an FC07 leak right? Or will it only work with GB roms, kernels?
Click to expand...
Click to collapse
If you "brick" your phone, a JIG is not going to help you.

Drumrocker said:
If you "brick" your phone, a JIG is not going to help you.
Click to expand...
Click to collapse
Depends what kind of brick. The /data nonwritable brick still allows you to write every other partition as well as use the jig to reset the counter

[Q] Bricked... but maybe a way out?

so I was on vacation in europe and my wifi wouldn't connect, so I flashed CM9 as on a whim and the wifi worked great (for google voice wifi calling). The phone was acting wacky so I went into recovery to wipe cache and I accidentally did a full wipe (I blame the jet lag) using the included recovery and rebooted..and my phone was bricked. no samsung screen, no download mode, just solid blue light.
here's my question...
I read in another post that you can try holding the vol down and power until the blue light does the single blink and see if odin recognizes it and trying oding el29. I'm at work, so before I drive all the way home to try it, is there any truth to this idea or should I just wait patiently for my replacement phone?
thanks in advance

I have heard it doesn't work for a full brick, which it sounds like you have. Wouldn't hurt to try though. Usually if you can't access the download screen you're done.
Sent from my SPH-D710 using XDA

dante32278 said:
I have heard it doesn't work for a full brick, which it sounds like you have. Wouldn't hurt to try though. Usually if you can't access the download screen you're done.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I know. and I knew immediately what I did. Not my first brick, lol. having TEP removes all safety protocols I should take when flashing, which I do about 10 times a week
but seeing that post gave me a glimmer of hope that I won't have to keep using my old blackberry until my replacement comes

You'll probably be able to get into ODIN D/L mode and flash everything but your /data partition. The problem is that usually when people do what you did, their /data partition memory gets corrupted in hardware, so you can try, but be prepared to get a replacement.

Oh no Wiz. Weren't you one of the early bricks from CWM Touch? I'm afraid sfhub is probably right. Getting Odin to connect is actually the easy part in these cases. Getting through data.img successfully is another story. Sorry man.

Sounds like you'll be stuck at data.img if you get into Odin. Best of luck though.

Dchibro said:
Oh no Wiz. Weren't you one of the early bricks from CWM Touch? I'm afraid sfhub is probably right. Getting Odin to connect is actually the easy part in these cases. Getting through data.img successfully is another story. Sorry man.
Click to expand...
Click to collapse
I actually never had a problem with the cwm touch, lol. my first brick was when I tripped over my usb cable while using odin XD
after that I got a usb jig... which I recommend EVERYBODY get. It's saved me from that fate at least 3x already.
but it didn't help now

didn't work. odin wouldn't recognize it
guess I'm stuck waiting for my replacement to come in..
I hate using this stupid blackberry

[Q] How to unbrick? (Blue LED of death)

I pretty much already know the answer - JTAG. I'm just hoping for a little bit of HOPE. Are there any other possible ways of me unbricking it with a blue LED of death?
No USB recognition, no Download mode, no recovery.
I was already on AOKP Build 30, I was getting forcecloses because I went from Build 29 to 30 without wiping data, so I used Mobile Odin for EL26 kernel, did a full wipe on data/cache, flashed AOKP Build 30, flashed Gapps, then I did a reboot. It rebooted onto the Galaxy SII screen with the yellow triangle, then it went away and rebooted again to come to the Blue LED of death and doesn't go away until a battery pull.
Apparently a USB jig won't work.
I can take it into Sprint (I have a warranty), but what should I tell them? Would they charge me for a new phone, and would I get it right away?

hrffd said:
I pretty much already know the answer - JTAG. I'm just hoping for a little bit of HOPE. Are there any other possible ways of me unbricking it with a blue LED of death?
No USB recognition, no Download mode, no recovery.
I was already on AOKP Build 30, I was getting forcecloses because I went from Build 29 to 30 without wiping data, so I used Mobile Odin for EL26 kernel, did a full wipe on data/cache, flashed AOKP Build 30, flashed Gapps, then I did a reboot. It rebooted onto the Galaxy SII screen with the yellow triangle, then it went away and rebooted again to come to the Blue LED of death and doesn't go away until a battery pull.
Apparently a USB jig won't work.
I can take it into Sprint (I have a warranty), but what should I tell them? Would they charge me for a new phone, and would I get it right away?
Click to expand...
Click to collapse
I think you may be hosed but if you have the jig I'd definitely give it a shot (just in case). If that doesn't work you can take it into Sprint. If I remember right with the warranty if they can repair it there's no charge, if they need to send you a new device it's a $100 deductible. Most people just say it quit working on them without offering an explanation, seems to work most of the time.
Good luck!

Apparently JTAG is not going to work either. Something seems to be actually destroying the MMC chip when you mess with ICS and custom recoveries.

sputnik767 said:
Apparently JTAG is not going to work either. Something seems to be actually destroying the MMC chip when you mess with ICS and custom recoveries.
Click to expand...
Click to collapse
JTAG has been able to recover some hard bricks. I think it depends on the extent of the damage.
Sent from my SPH-D710 using Tapatalk

Dchibro said:
JTAG has been able to recover some hard bricks. I think it depends on the extent of the damage.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Have not heard of Jtag bringing anyone back from these bricks though.. Also there is a guy in the thread above yours... right before I posted that had a similar issue with AOKP Build30... Hope there is no problem with that rom..

playya said:
Also there is a guy in the thread above yours... right before I posted that had a similar issue with AOKP Build30... Hope there is no problem with that rom..
Click to expand...
Click to collapse
Ya, Me too.

hrffd said:
I pretty much already know the answer - JTAG. I'm just hoping for a little bit of HOPE. Are there any other possible ways of me unbricking it with a blue LED of death?
No USB recognition, no Download mode, no recovery.
I was already on AOKP Build 30, I was getting forcecloses because I went from Build 29 to 30 without wiping data, so I used Mobile Odin for EL26 kernel, did a full wipe on data/cache, flashed AOKP Build 30, flashed Gapps, then I did a reboot. It rebooted onto the Galaxy SII screen with the yellow triangle, then it went away and rebooted again to come to the Blue LED of death and doesn't go away until a battery pull.
Apparently a USB jig won't work.
I can take it into Sprint (I have a warranty), but what should I tell them? Would they charge me for a new phone, and would I get it right away?
Click to expand...
Click to collapse
I am not sure if you listed every step you did or were just summarizing.
Did you have the Yellow Triangle before any of this? I ask because nothing you did should have triggered the yellow triangle unless you had it before (or traditional ODIN'd CWM outside of the steps you listed)
Also, nothing you did should have prevented you from getting into ODIN DL mode. Even in the case of /data EMMC corruption, you can still get into ODIN DL mode.
Are you sure you can't get into ODIN DL mode? Pull the battery, then as you insert the battery press-and-hold Power+VolDown. If it is difficult to do the finger combination, then you are doing it right.
If you can get into ODIN DL mode, use the EL29 OneClick to get back to a known base. Use the Full version. If it hangs on data.img, then you have the /data emmc corruption and your only option is to get the unit replaced. JTAG will not work.

I have a quick question since we seem to be on the topic of bricks today. Has anybody bricked from making a nandroid in ICS recovery then using format all zip and then restoring from it. I am not referring to AOKP, CM9, etc rather stock or themed stock ROMs. I would NEVER recommend anyone to do this but I have made a few and restored them only wiping with format all zip. Am I tempting fate here or what? I thought this was narrowed down to wiping individual partitions or working from AOKP, CM9 recovery. Any thoughts here?
Sent from my Nexus S 4G using xda premium

JohnCorleone said:
I have a quick question since we seem to be on the topic of bricks today. Has anybody bricked from making a nandroid in ICS recovery then using format all zip and then restoring from it. I am not referring to AOKP, CM9, etc rather stock or themed stock ROMs. I would NEVER recommend anyone to do this but I have made a few and restored them only wiping with format all zip. Am I tempting fate here or what? I thought this was narrowed down to wiping individual partitions or working from AOKP, CM9 recovery. Any thoughts here?
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
the question is why are you wiping when restoring a nandroid back up?
You should be fine but the wiping step is pointless. The restore process should do it automatically.
Also yes, I have done a backup while in FC22 based CWM and recovered it from another FC22 based CWM install and it worked fine. No need to wipe at all.
Sent from my SPH-D710 using Tapatalk 2 Beta-5

@JohnCorleone,
There are other posters that agree with you that not all ICS ROMs have that problem. Epix4G has reminded me of this on occasion, but that was in regards to using Calk's ROMs and solutions. But I would also caution that this probably isn't a good idea for Joe Schmoe with a shiny new E4GT... maybe those that have been around longer or are willing to take that risk.
In my personal case I don't have the option for insurance and had to pay full price for this phone. I can't afford to brick it so I stick with the ODIN TARs for now. Maybe a few months down the road, once ICS is out and hopefully there's a better handle on this, I'll try some of the other options out there. Besides, coming from an Optimus S stock will do everything I need and more right now.

garwynn said:
@JohnCorleone,
In my personal case I don't have the option for insurance and had to pay full price for this phone. I can't afford to brick it so I stick with the ODIN TARs for now. Maybe a few months down the road, once ICS is out and hopefully there's a better handle on this, I'll try some of the other options out there. Besides, coming from an Optimus S stock will do everything I need and more right now.
Click to expand...
Click to collapse
Ya, I was using my phone on a different carrier, and bricked it. Talk about a ****ty realization. And coming from an Optimus, life is goooood eh? lol.

take the phone to sprint as long as they cant see anything your good to go. tell them you plugged it in to charge came back and smelt something funny and phone was real hot.

Same brick here, only blue led of death and no activity.
The phone is outside US so can't even get warranty / replacement. Can't get get mmc chip from Samsung which in this case is KLMAG4FEJA-A003

Jtag
sent from MY BAD A$$ ET4G

JTAG has failed over RISC

Disillusioned said:
Same brick here, only blue led of death and no activity.
The phone is outside US so can't even get warranty / replacement. Can't get get mmc chip from Samsung which in this case is KLMAG4FEJA-A003
Click to expand...
Click to collapse
Are you able to get ahold of a USB jig and see if this will somehow get it to come to life? If not, have you considered asking someone in the US to try and work with Samsung on your behalf?

Its pretty much dead at this point, time to replace the device. Even if a jig will trigger dl mode it will more than likely fail/hang at /data in odin.
Sent from my SPH-L710

-EViL-KoNCEPTz- said:
Its pretty much dead at this point, time to replace the device. Even if a jig will trigger dl mode it will more than likely fail/hang at /data in odin.
Sent from my SPH-L710
Click to expand...
Click to collapse
Yes, but if there is not a replace option getting that far would mean a modified pit will restore most functionality.
Sent from my SPH-D710 using Tapatalk 2

garwynn said:
Yes, but if there is not a replace option getting that far would mean a modified pit will restore most functionality.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
True, that's a 50/50 shot and worth the try if there's not a warranty or ins option, but if warranty is an option I'd personally grab a replacement instead of patching up a borked one just so I wouldn't run into a major issue from patching it back together and then be out of warranty and stuck with a total brick. I've also seen a few ppl be able to get to dl mode and it fail at data but the pit not work, probably user error but never know could just be totally fubar from the emmc bug
Sent from my SPH-L710

-EViL-KoNCEPTz- said:
True, that's a 50/50 shot and worth the try if there's not a warranty or ins option, but if warranty is an option I'd personally grab a replacement instead of patching up a borked one just so I wouldn't run into a major issue from patching it back together and then be out of warranty and stuck with a total brick. I've also seen a few ppl be able to get to dl mode and it fail at data but the pit not work, probably user error but never know could just be totally fubar from the emmc bug
Sent from my SPH-L710
Click to expand...
Click to collapse
It was def user error. In another post he said he loaded aokp from rujelus recovery:crying: