Develop Bugs

[Q] Desire UPGRADE problem

I've used the guide [HOWTO] Downgrade Froyo (2.2) to Stock 2.1 (ANY HBOOT | WIN/LINUX/MAC | ROOT to downgrade/unroot my phone and i want to update it to android 2.2
But my phone says "There are no updates available for your phone".
My software info:
Firmware: 2.1-update
Baseband: 32.41.00.32U_4,08.00.09
Kernel: 2.6.29
Build number: 1.21.405.2 CL174215 release-keys
Software number: 1.21.405.2
Click to expand...
Click to collapse
The phone is UNBRANDED and i've done this process many times before.
What was changed this time?

1. Download this:
http://liveimage.htc.com/OTA_Bravo_Froyo_HTC_WWE_2.09.405.8-1.21.405.2_release4dua3bcrut4wrv30.zip
2. Rename the file update.zip (not update.zip.zip) and copy it to the root of your SD card (by root in mean not in any folders)
3. Turn off your Desire
4. Hold volume down and turn the phone on. You'll boot to a white screen with 3 green Androids at the bottom. Once the screen has checked for image files use the volume keys to go to 'Recovery' and press power to select
5. You'll now boot to a screen with a red ! - at this point hold volume up and press power and you'll get a small blue menu. Again, use the volume keys to select 'apply SD:update.zip' and press power
6. Follow the instructions
You can then get the next OTA from 2.09.405.8 to 2.10.405.2 over Wi-Fi

Thank you very much for the answer... The update from the zip file completed successfully..
But i still have "No updates available for your phone"
Any other ideas?

Do the same with this file:
http://fotadl.htc.com/OTA_Bravo_HTC_EU_2.10.405.2-2.09.405.8_releaseol2djq7rqarka2ka.zip

I've formatted /system /boot /data /cache then i reflashed it with both these rom files..
Still "No updates available."
I really dont know whats happening..

Any ideas?

[Q] Help Needed - GT-N7102

Yes this is another GT-N7102 thread. Yes I did search for days trying to find a solution before posting here. Yes this phone is rooted (installed SuperUser but going through that process of setup and login into the Play Store every time is a pain). No there is no bloody Odin download mode just that infuriating Factory mode all in kanji (Vol Down + Power, holding down menu or not holding down menu still produces the factory mode).
One of the big problems I have is that when I reset to factory and setup the phone, when the phone is rebooted again, the boot loop starts all over. Hence I have only one shot to get it right while the phone is in the operating system before I have to do a wipe again to get out of the resulting loop.
I've been trying for days to get either the stock rom, a custom recovery, or a custom rom like CM installed on this device. I need some help on getting stock installed with maybe a custom recovery like CWM or TWRP, or at least pointed in the direction of the answer.
Information about this particular phone:
Model #: GT-N7102
Android Version: 4.1.1
Baseband Version: N7100XXALIE
Kernel Version: 3.0.31-178067 SMP PREEMPT
Build #: JRO03C.N7100ZSALIA
Custom Build Version: I968.7500A.02.02.I.A-V1.0.3B06R81
At reboot: Vol Down + Power = Factory menu in kanji (there is no Odin mode when pressing Vol up when in this mode, just scrolling through the options)
Vol Up + Power = Boot mode selection (options are recovery, fastboot, and reboot)
Is there any way to do what I am trying to accomplish or am I just screwed and trash the phone?
Thanks
Nin

Ninhalem said:
Yes this is another GT-N7102 thread. Yes I did search for days trying to find a solution before posting here. Yes this phone is rooted (installed SuperUser but going through that process of setup and login into the Play Store every time is a pain). No there is no bloody Odin download mode just that infuriating Factory mode all in kanji (Vol Down + Power, holding down menu or not holding down menu still produces the factory mode).
One of the big problems I have is that when I reset to factory and setup the phone, when the phone is rebooted again, the boot loop starts all over. Hence I have only one shot to get it right while the phone is in the operating system before I have to do a wipe again to get out of the resulting loop.
I've been trying for days to get either the stock rom, a custom recovery, or a custom rom like CM installed on this device. I need some help on getting stock installed with maybe a custom recovery like CWM or TWRP, or at least pointed in the direction of the answer.
Information about this particular phone:
Model #: GT-N7102
Android Version: 4.1.1
Baseband Version: N7100XXALIE
Kernel Version: 3.0.31-178067 SMP PREEMPT
Build #: JRO03C.N7100ZSALIA
Custom Build Version: I968.7500A.02.02.I.A-V1.0.3B06R81
At reboot: Vol Down + Power = Factory menu in kanji (there is no Odin mode when pressing Vol up when in this mode, just scrolling through the options)
Vol Up + Power = Boot mode selection (options are recovery, fastboot, and reboot)
Is there any way to do what I am trying to accomplish or am I just screwed and trash the phone?
Thanks
Nin
Click to expand...
Click to collapse
1. Head to the download page, this is the UNmodified firmware provided ‘as is’ from Samsung/carrier servers.
2. After download is complete, extract the downloaded file and you should get a MD5 file.
3. Enter the download mode form your device [normally by holding the volume up button + home button + power button]
4. Connect your device to your PC.
5. Start Odin.
6. Odin should recognize your device, and you can tell so by seeing that the first slot from the upper left is taken, if not then you need to install a driver for your device. [I personally just download Kies and it automatically download the proper driver for your device]
7. Click on PDA from Odin and browse to the extracted MD5 file.
8. Press Start.
9. Do not unplug your device until the process is fully completed.
10. The phone will reboot and you should see a Pass! on Odin, which means the process was successfully accomplished.
This will turn your device condition back to it's stock condition [like it's brand new] ( no root- no custom ROM -no nothing)
Anyway if you wish to root do the same past steps but using this file.
Afterwards you can install a custom recovery with the same steps again using this file.
Don't proceed with any step of the past steps unless you fully understand every single one of them, if you have any difficulties understanding anything feel free to ask!
If I helped in any way, Hit the [thanks] button ( if I have one XD).

huawei p6-u06 can not go to recovery its problem please help me

hello all bro
i have p6-u06
only hung at huawei ascend
cant go recovery using volum down and power
please hellllllllllllllllllp

Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.

RabbidZ said:
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
Click to expand...
Click to collapse
hi bro
i did but not slove please help me

i download this
http://consumer.huawei.com/en/mobile-phones/support/downloads/p6-u06-en.htm#anchor
and i put dallod insid memory
and follw instraction but cant go to donloawd mod
please help me
im sosorry my langug is wake

RabbidZ said:
Have you tried to turn it off and on again? That was not a joke. Press the POWER Button for 10-15 sec and when the screen goes black use the VOL UP + VOL DOWN + POWER Button. Now you shuld get to the recovery. Please use Ascend P6 Q&A, Help & Troubleshooting the next time.
Click to expand...
Click to collapse
hi bro
iafter put software dallod insid memory card
i choos apply update from extrnal storge but not slove fail

nokia alkng said:
any one help me plaz
Click to expand...
Click to collapse
Your phone boot or not ?
"Yes" > You can update throught the settings > More info > Update > Local Update
The update.app need to be in \sdcard\dload folder if you don't have create it If the dl file is a .zip unzip it into you will see the update.app
and if you allow debuging mode (Spam the build number in settings > More info and you will be allow to access to the dev section (in settings) and tick debugging mode then connect to your pc (check the debugging mode in the notification bar)) you can now access to the recovery using adb
For Adb you can dl it here > http://forum.xda-developers.com/showthread.php?t=2636231 and follow the instruction to connect your phone then write this line in the command window
Code:
adb reboot recovery
your phone will boot into recovery
To update The update.app need to be in \sdcard\dload folder if you don't have create it If the dl file is a .zip unzip it into you will see the update.app
The version you have dl is old, latest JB is B132 and KK is B513 for the p6-u06 international (these rom are multilanguages)

Skyllery said:
Your phone boot or not ?
"Yes" > You can update throught the settings > More info > Update > Local Update
The update.app need to be in \sdcard\dload folder if you don't have
create it
and if you allow debuging mode you can access to the recovery using adb
Code:
adb reboot recovery
Click to expand...
Click to collapse
bro im so sorry to late but phone cant boot and no usb debug and stell hung logo android plz.please pleassss help me:crying:

bro
USB Debuggin not open plz help me pleaseeeeeee

hi all
i use this
"TWRP Installer by bokchoi2020"
"Credits to Surdu and TeamWin"
"Make sure your system is in Android right now, usb debugging turned on."
"Reboot to bootloader..."
error: device not found
"Installing TWRP...."
< waiting for device >
"Rebooting to system..."
< waiting for device >
Press any key to continue . . .
please help me

Hello,
I´m Trying to make this (http://forum.xda-developers.com/show....php?t=2630208) work on my Huawei,
but i´ve run into some problems.
I cant get my phone to go in fastboot and ADB keeps saying Waiting for devices or says Error device not found.
This image shows what im getting if i connect my phone to my PC and reboot it using VOL UP + VOL DOWN + POWER
(USB Update Enter. . .
HUAWEI SDCARD AND USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.)
im sure my phone is running the right Firmware ( B118) here is a screenshot please tell me if im doing anything wrong.
please help

nokia alkng said:
help me pleaseeeeeeeeeeeeeeeeeeee
Click to expand...
Click to collapse
Tried the search-function yet?
There are several howto's for it

nokia alkng said:
who help me i will donat himmmmm:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hi guys,
I can get to recovery mode and the initial splash screen, but not into Android OS on my Huawei p6 U06.
I tried reflashing the rom via SD card with UPDATE.APP B111, but it still fails to boot and hangs on the splash screen.
Another weird thing is that my splash screen doesn't show the huawei logo but an android logo....
I tried to adb the phone but there are no suitable drivers for phones in recovery mode... only for USB developer mode...
Hopefully there is a fix to this.
Thanks guys.

nokia alkng said:
hi all
i use this
"TWRP Installer by bokchoi2020"
"Credits to Surdu and TeamWin"
"Make sure your system is in Android right now, usb debugging turned on."
"Reboot to bootloader..."
error: device not found
"Installing TWRP...."
< waiting for device >
"Rebooting to system..."
< waiting for device >
Press any key to continue . . .
please help me
Click to expand...
Click to collapse
The debugging mode is off so the device can't be found by adb.
If you can't use stock recovery and you can't flash any recovery because you can't access throught adb, your phone don't boot .. I don't know what to tell you .. your phone is dead ? .. how your phone is in this condition ?
Another weird thing is that my splash screen doesn't show the huawei logo but an android logo....
Click to expand...
Click to collapse
Fake Ascend P6 or not the good version so the update brick the phone ?

hi bro
good day
thanx to reply
my phone not dead stell lif in hospatel but now is hung at android logo and can go to recovery to wip cach and wip data its all those done but stell problem not slove stell hung android logo please help me

nokia alkng said:
hi bro
good day
thanx to reply
my phone not dead stell lif in hospatel but now is hung at android logo and can go to recovery to wip cach and wip data its all those done but stell problem not slove stell hung android logo please help me
Click to expand...
Click to collapse
Which Recovery ? Stock or TWRP ?
You can't flash/update ?
I tried reflashing the rom via SD card with UPDATE.APP B111, but it still fails to boot and hangs on the splash screen.
Click to expand...
Click to collapse
Stock :
Try with B125 or B132 because B111 is too old maybe it's the cause of the problem.
sdcard\dload\Update.app and reboot into recovery "Power (hold) + Volume up (hold) +Volume Down (hold) then when you see the ascend logo just Volume + & - (hold)

ok bro
thanx i was busy to day
so i will try tomorow
thanx aloot again

Skyllery said:
Which Recovery ? Stock or TWRP ?
You can't flash/update ?
Stock :
Try with B125 or B132 because B111 is too old maybe it's the cause of the problem.
sdcard\dload\Update.app and reboot into recovery "Power (hold) + Volume up (hold) +Volume Down (hold) then when you see the ascend logo just Volume + & - (hold)
Click to expand...
Click to collapse
hi bro
i dwoload p6-b132 and put dallod insid sdcard and the problem when just press volume +&- go to recovery only and gave me 5 choosin
1- reboot system now
2-apply update from extrnal stoarge
3- wipe data/factory
4- wipe cache partition
5-apply update from cach
when i choos apply update from extrnal stoarge and select dload no theing apper all empty folder like 00/
and is F A I L
please help :crying:

nokia alkng said:
hi bro
i dwoload p6-b132 and put dallod insid sdcard and the problem when just press volume +&- go to recovery only and gave me 5 choosin
1- reboot system now
2-apply update from extrnal stoarge
3- wipe data/factory
4- wipe cache partition
5-apply update from cach
when i choos apply update from extrnal stoarge and select dload no theing apper all empty folder like 00/
and is F A I L
please help :crying:
Click to expand...
Click to collapse
Have you put Update.app in /sdcard/dload ?
You can try with a formatted sdcard sometimes it's the problem

hi bro
i format sd card 2 gb fat32
and put dlaod insid memory card and go recovery and i changed other sdcard sandisk 4gb but not slove my problem please help me

Skyllery said:
Have you put Update.app in /sdcard/dload ?
You can try with a formatted sdcard sometimes it's the problem
Click to expand...
Click to collapse
bro bro bro:crying::crying::crying:
i did i format and chang 3 memory card and same problem
pleaeeeeee help :crying::crying:

Error in recovery mode while installing official ota update

I'm getting error in recovery mode while updating to 6.0 which I got through OTA
The error is a dead Android's chest open with a blue warning sign
I Even done factory reset but of no use.
How can I solve this please help me

Press volume down + power then power up
Maybe that will solve

Nothing to worry
It is normal ,not an error just go to recovery mode and when you dead Android image follow the steps below
Hold power button for 3 second the press vol up button
From the menu select Update from sdcard and select Zip file

Tried that
Rexspidy said:
It is normal ,not an error just go to recovery mode and when you dead Android image follow the steps below
Hold power button for 3 second the press vol up button
From the menu select Update from sdcard and select Zip file
Click to expand...
Click to collapse
Hey, tried that with original ota zip. But installation is aborted, and says
system/lib/libcodecvdry.so has unexpected contents
With status 7 error

What's your mobile build number and r u using ota flashable Zip file about 338 mb??

Rexspidy said:
What's your mobile build number and r u using ota flashable Zip file about 338 mb??
Click to expand...
Click to collapse
Build number is LMY48M
yes I'm using ota flashable zip

Then must be something I can's understand might be problem with the zip file ,if you follow my above steps to apply update it should be done within 20 minutes without any error.Download the zip from a verified location.I hope it will solved your problem.

How to Root Your Samsung Galaxy A10 + Install Twrp

READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!

i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?

Oh. Alright thanks for telling me.

Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.

Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:

cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?

cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.

Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.

Can you upload it to Mediafire? Mega marks a "temporal error"...

Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?

Works on a105m?

Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes

i receive message that i running samsumg not official firmware after odin install recovery.tar

not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)

andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.

BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message

have you fixed the storage reduced to 16gb problem?

I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?