Develop Bugs

My Seidio Spring-Clip Holster (belt clip) review.

Review: HTC EVO 4G Seidio Spring-Clip Holster (non-cased phone) (MSRP: US$29.95)
Photo Gallery:
Easy to remove!
Tight, close fit to show off your shiny, new EVO!
High-quality plastic makes this one tough case and holds the EVO nicely!
Felt backing unlike anything that I have seen in a holster to protect the screen!
Introduction:
I would just like to start off by saying that, like many of you, I absolutely could not wait to get my hands on the brand new Sprint HTC EVO 4G. Also like many of you, the thought of scratching, dinging, or cracking my brand new EVO just makes me cringe. Also, the dust issues that the HTC Hero had drove me crazy, and I couldn’t stand having any dust in or on my EVO. This is precisely why I’ve chosen not to carry my EVO in my pocket (as I have done with every phone I’ve owned before) in favor of carrying it on my belt. The Seidio Spring-Clip Holster provides the exact remedy to my situation, and it does its job wonderfully.
Initial Impressions:
The first thing that I noticed when I opened my holster was the fact that, unlike any that I had used or seen before, it had a felt interior to protect the EVO’s large glass screen from any sort of scratches or potential dust build-up that tends to find its way into plastic cases. The plastic is very solid, and it is fairly hard to flex. Both the belt clip and the spring-clip used to hold the EVO in place are very sturdy and snappy.
Daily Use:
The slanted ridge on the spring-clip makes sliding the EVO into place a breeze. It felt very natural to just slide my EVO into place after just a couple minutes of use. The clip locks it firmly into place, and it even features a tiny groove in the plastic to ensure that it does no come into contact with the EVO’s power button (I didn’t even notice this until I became curious as to why it never triggered standby mode off). In order to make sure that nothing would become of my EVO in some high-speed conditions, I even tested some rapid, short movements to make sure there was no chance of the phone slipping out. The belt clip itself is able to be positioned in seven different positions for whatever you prefer. Personally (as a fairly thin person), I prefer to keep the holster in the upright position for the most comfortable feel. The EVO, being the heavy-weight it is, adds a fair amount of weight to your belt, but everything just feels natural. I actually prefer the weight because it lets me know everything is still there.
Conclusion:
I’d definitely recommend this to anyone getting an EVO who is either concerned about damaging their device or just wants a nice, professional way to carry (and show off!) their EVO. I find that it is worth every cent because the craftsmanship and quality of materials of Seidio products is second to none! I’ve never had any issues with one of their cases, and I don’t expect to have any with my belt clip. I would also like to remind everyone that there is also a holster available that is compatible with Seidio’s Innocase so you can protect your phone with a solid case and carry it on your hip to protect it from dust, dirt, and lint in your pocket.

I'm impressed!

I have the holster/case combo for my Nexus and it is awesome. Best holster i've ever owned for a phone the springloaded top clip is the bees knees LOL Plan to get this same one you have for my EVO.

I just ordered my case and holster combo from Amazon (half the price than the Seido site)

I had a holster like this for my Treo and really liked it, especially how it tightly hugged my side rather than sticking out like many other clip/holster cases.
The one question I have is how well it will work if you have one of those full-body super-thin skins (like Inivisible Shield or the cheaper versions from BestSkinsEver).
From past experience I found that the corners of the skins sometimes tend to peel away from the repeated sliding in/out of the holster. But I love those skins because they completely prevent scratches and add almost no bulk (but no drop-protection).
Hoping they get the caseless model of the Seidio holster on Amazon (less expensive and free shipping with Prime).

I can't take the cover off for the life of me lol
Any tips?
-------------------------------------
Sent via my EVO using XDA Tapatalk

hchavarria said:
I just ordered my case and holster combo from Amazon (half the price than the Seido site)
Click to expand...
Click to collapse
Thanks for the tip, ordered my combo for 39.

I just got this earlier today. Took pics, and was going to write a review, but I see a great one is already up. I really like this.
I wanted a Krusell case, but they don't make the style I want, big enough for the evo. http://krusell.se/products/1/?catid=50&productid=2854
I found this on Amazon, and it comes in a close second, for me. Wanted a way to carry the phone, but did not want a snap on case adding to the considerable size of the evo. Frankly, drop a phone with the Seidio snap on case, and your Evo will be just as well off, without the case.
Anyway, really just a bump to the review. I jumped all around, and could not get the phone to fall off

Great review. I had just ordered my Spring Clip and Phantom Skinz Carbon Fiber skin yesterday and can't wait to get them. Thanks for the great review as it seems I made the right choice.

Does anyone know if full body zagg or the like can be used with these holsters?
Sent from my Evo 4g using XDA app!

dynasty77 said:
Does anyone know if full body zagg or the like can be used with these holsters?
Sent from my Evo 4g using XDA app!
Click to expand...
Click to collapse
Yes. I have the Chromatic Carbon Fiber skin and clear screen guard from Phantom Skinz and it fits perfect.

Excellent write up, thank you. Based in large part on this thread I just got the combo set from amazon. I hope I didn't just get evo_rick_rolled.

dynasty77 said:
Does anyone know if full body zagg or the like can be used with these holsters?
Sent from my Evo 4g using XDA app!
Click to expand...
Click to collapse
you should be ok, might be a little tight tho
also, the holster will leave some marks on the screen protector... where the screen touches the holster on the inside. this is the reason i went with a hard plastic screen protector like http://www.clarivue.com/htc-evo-4g-screen-protector.html
over all i love these holsters, i have used them on 3 diff phones so far... i do have one of these for the naked Evo im not using that im willing to sell... im using the active case and holster now and i have the rugged on its way.

Mayonesa said:
you should be ok, might be a little tight tho
also, the holster will leave some marks on the screen protector... where the screen touches the holster on the inside. this is the reason i went with a hard plastic screen protector like http://www.clarivue.com/htc-evo-4g-screen-protector.html
over all i love these holsters, i have used them on 3 diff phones so far... i do have one of these for the naked Evo im not using that im willing to sell... im using the active case and holster now and i have the rugged on its way.
Click to expand...
Click to collapse
I haven't had mine make any marks on my naked screen. Given, that may be because there is no extra thickness from the screen protector and the case it just designed that well.

Verizon Motorola DROID X Snap-In Belt Holster - Yes Its Real

Hey guys, i got this in a few days ago so I can verify it fits the MOTOROLA DROID X not the Samsung that the description says.
You can even tell by the part # that it is made for the DROID X. Why Verizon has it screwed up I dont know, but it is the ONLY face-in snap-in holster I have found.
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=46229
Enjoy, I will post pics of it on my phone in a bit.

They have a better one that comes with a back shel also
It is called shell/holster combo for $30
Sent from my DROIDX using Tapatalk

I have the holster. It's a little flimsy and I'm probably going to replace it with the Seidio. As for the holster shell combo, it sucks. I had it for my incredible and it gets loose.
Sent from my DROIDX

Check out this one...
http://store.androidcentral.com/verizon-shell--holster-combo/4A24A7318.htm
I like that better because it comes with the protective case, and its a clip on.

That's the one I had, it's made by Amzer. It doesn't protect the top of the device either. Mine fell out of the holster and dinged up the top of my phone.

Yourrid said:
Check out this one...
...store.androidcentral.com/verizon-shell--holster-combo/4A24A7318.htm
I like that better because it comes with the protective case, and its a clip on.
Click to expand...
Click to collapse
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight. It works great for me though, no worrying about the phone falling out of the holster.
SW

SideWynder said:
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight. It works great for me though, no worrying about the phone falling out of the holster.
SW
Click to expand...
Click to collapse
I might have to get this one then, if its that tight.
I work at an auto parts store so im constantly moving around, brushing up against greasy things or crawling under people's cars so I need some protection for my phone. How is the quality of the case?
Also, does the case wrap around the front of the phone? I mean if I lay the phone face down will the screen touch or will the case protect it?

Yes, the case does wrap around the front enough to keep the glass off the counter when you lay it down. Both the shell and the hoster are rigid with a rubberized feel.
It doesn't add a lot of bulk to the phone like some cases I've looked at, so the phone is pocketable when you want to go without the holster.
I picked mine up in my Verizon store, so would recommend you stop at one and ask to see it on an X.

SideWynder said:
Yes, the case does wrap around the front enough to keep the glass off the counter when you lay it down. Both the shell and the hoster are rigid with a rubberized feel.
It doesn't add a lot of bulk to the phone like some cases I've looked at, so the phone is pocketable when you want to go without the holster.
I picked mine up in my Verizon store, so would recommend you stop at one and ask to see it on an X.
Click to expand...
Click to collapse
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?

Yourrid said:
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Click to expand...
Click to collapse
Yes i have this holster. Just picked it up yesterday. And it seems secure and I liked the look and the feel of it in my hand. Just didn't like that it left the top of the phone exposed. In the holster its protected though. Its when you take it out it seems like it could possibly get dinged at the top of the phone if it fell. Otherwise it seems pretty cool. Im looking to see if someone comes out with a holster that includes complete coverage of the phone and holster combo. I think they didn't cover the top because the antenna is located there. Not sure but just a theory.

Yourrid said:
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Click to expand...
Click to collapse
The screen protectors we talk about in this thread (the SGP Crystal Clear ones) are the best by far, and they also have the anti-fingerprint ones too.
http://forum.xda-developers.com/showthread.php?t=738601

Returned the hard silicon one they sell and got me the shell/holster combo. Awsome!
Sent from my DROIDX using XDA App

SideWynder said:
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight.
Click to expand...
Click to collapse
I had a girlfriend like that once

OneStepAhead said:
I had a girlfriend like that once
Click to expand...
Click to collapse
+1 for Hilarity

GoldenCyn said:
Returned the hard silicon one they sell and got me the shell/holster combo. Awsome!
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I have that one too but the matte black finish is peeling off very ugly as it does. Love the function exactly what I wanted, but the shiney plastic under the finish looks terrible. Just my two cents.
Sent from my DROIDX using XDA App

I had an idea for a holder that works as a belt buckle a few years ago hahaha
Sent from my DROIDX using xda premium

i use this case it is great i have another similar one for my razr HD

Question About the Otterbox Defender

I just purchased an Otterbox Defender for $31.95 on eBay (an excellent deal! ). I just wanted to see if the case makes the phone more difficult to use and if there are any problems that have arisen to anyone as a result of it.

I used the defender for a day and returned it. For one, i forgot how much of a non-fan i am of soft shells/cases.... since they seem to attract dust from other dimensions sometimes. The holster is nice... but in order to clip it in or take it out, it usually seemed to be a two-hand job, so that kinda defeated the purpose to me. It also seemed to make it slightly more difficult to actually get an accurate read with the fingerprint sensor.... i believe mostly due to the silicon outer shell, which as you swipe your finger, would peel back somewhat and make it hard to actually get a complete scan without stopping short or something like that.

elementaldragon said:
I used the defender for a day and returned it. For one, i forgot how much of a non-fan i am of soft shells/cases.... since they seem to attract dust from other dimensions sometimes. The holster is nice... but in order to clip it in or take it out, it usually seemed to be a two-hand job, so that kinda defeated the purpose to me. It also seemed to make it slightly more difficult to actually get an accurate read with the fingerprint sensor.... i believe mostly due to the silicon outer shell, which as you swipe your finger, would peel back somewhat and make it hard to actually get a complete scan without stopping short or something like that.
Click to expand...
Click to collapse
I've used Defenders before with my Nexus One & HTC HD2, and loved them though they were very bulky, but I thought the extra protection was worth it (just in case). I Ask because the my Defender for my N1 had problems with the buttons and they weren't really responsive and dust always got in the screen from the hole for the trackball. Thanks for your feedback! I'm planning on painting the plastic shell either red or white since I've always envied the iPhones multitude of colors

I have had mine in a defender since day one. I used it without for about 1/2 a day then loaded it in. I own a construction company so i am out in the dirt and weather constantly so the otter box is almost a must. I haven't noticed any loss of functionality. It takes a few times to learn how to unsnap the latch with the knuckle of your index finger as you remove the phone with one hand but it works once you learn the motion. No problems whatsoever using the fingerprint unlock, it is a pretty cool feature. I did notice the screen was not as sensitive for about 5 minutes until the plastic cover built in the case settled down to it.
Jack

I have the defender on mine..no problems so far..yes it makes the phone a little bigger. Its the first time that I am using such a case.
I quickly figured out how to snap it in and out of the belt clip with one hand.

I also have mine in a Defender case - However i ripped out the built in screen protector in the Defender case - those things are lame... I have a screen protector i put on within 10 seconds of opening the box for the phone - my screen has never been touched since taken out of the box...
I have no issues with the Otterbox Defender Case or Holster whatsoever...

Not to hijack the thread but the Otterbox Commuter is an extremely solid case that gives excellent protection without the bulk or the soft exterior of the Defender. I used one on my iPhone 4 for the past 6 months and loved it. Waiting on that model to show up for the Atrix now.

HarleyDude said:
Not to hijack the thread but the Otterbox Commuter is an extremely solid case that gives excellent protection without the bulk or the soft exterior of the Defender. I used one on my iPhone 4 for the past 6 months and loved it. Waiting on that model to show up for the Atrix now.
Click to expand...
Click to collapse
They already have one for the Atrix....

jgc121 said:
I also have mine in a Defender case - However i ripped out the built in screen protector in the Defender case - those things are lame... I have a screen protector i put on within 10 seconds of opening the box for the phone - my screen has never been touched since taken out of the box...
I have no issues with the Otterbox Defender Case or Holster whatsoever...
Click to expand...
Click to collapse
This. I bought my Atrix along with some anti-glares and an Otterbox Defender. I quickly realized how worthless the Otterbox's built-in screen protector is (and how muddy it makes the screen look), and promptly ripped it out. I got used to carrying my Captivate in a Defender, so I was already used to the holstering/unholstering procedure. You do have to make sure not to rub your finger against the shell when using the fingerprint scanner, but it's a pretty easy technique to learn.

ive had quite a few of them there great for protection but forget using it with a dock

Zephyrs said:
They already have one for the Atrix....
Click to expand...
Click to collapse
Right but I am waiting for it to show up in a store here in San Antonio. No luck so far, hopefully this week.

The only dock I am interested in is the car dock. Will either of the Otterbox cases (defender or commuter) work with the car dock?

tonyantonucci said:
The only dock I am interested in is the car dock. Will either of the Otterbox cases (defender or commuter) work with the car dock?
Click to expand...
Click to collapse
No........

Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?

SquareBare said:
Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?
Click to expand...
Click to collapse
It shouldn't. Personally, I think the Atrix runs a little cooler than the iPhones and both my parents have the defenders for their iPhones and neither of them have had any issues.

HarleyDude said:
Right but I am waiting for it to show up in a store here in San Antonio. No luck so far, hopefully this week.
Click to expand...
Click to collapse
you can get it for $20 off on amazon unless you need to pick it up in a brick and mortar establishment

SquareBare said:
Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?
Click to expand...
Click to collapse
I don't foresee any heat issues whatsoever with mine. Gets slightly warm sometimes but nothing problematic. In ATL as well.

Otterbox Commuter vs Impact vs Bodyglove

I am trying to decide between one of these three cases but can't really decide which since most stores don't have them so I haven't had the chance to actually feel and see how they look on my phone. I'm not in an environment where I drop my phone a lot but I still need a little protection so I was wondering if I could get any recomendations
Sent from my Motorola Atrix using Tapatalk

do not get the impact
the fit is not good
i cannot comment on the commuter because the defender is the same price and i got the defender, and i like it alot

I've owned the incipio feather and just got the commuter in the mail a few minutes ago. I didn't like how fragile the feather was, so I opted for the commuter for better protection.
As far as fit, I'm pretty happy with it, although the silicone parts that cover the ear speaker and the bottom of the phone are a little floppy if you mess with them. The back of the case is a little slicker than I would like, but the silicone parts on the side give adequate grip. The volume buttons are actually easier to use with the case on than without a case, and the port covers seem great too.
I'd give it a 8/10 because the slickness of the plastic and floppy silicone subtract a bit from an otherwise excellent case.

Get the Commuter
I just got it the other day. It really seems to protect the phone quite well and fits snugly. Adds some bulk, but probably less than the impact.
Pros:
Excellent Phone Protection
Easy to install
Doesn't add too much bulk
Cons:
Rubber attracts lint
Included screen protector isn't figerprint / smudge resistant
Does add some bulk

Definately the Commuter.
I love mine!

I bought the Body Glove a couple weeks ago after finding out I can still use my car dock with it on. (Just barely.) I wanted it because my wife has had a Body Glove on her Captivate since July of last year and it's great. The bg for the atrix is styled a little differently but is just as good. Not too much added bulk either. The phone is a lot easier to hang onto now too.

defender
- yes the rubber does attract foreign particles. however i think we all can agree that all electronics share that feature...
but you can just rinse it off while it dries your phone is still fully protected.
-screen protector is built into the shell. no squeegee's. NO bubbles. NO glare!
-fully enclosed and port plugs ( commuter has plugs )
-360 swivel belt clip.
personally i really enjoy this clip/case for its dual face design. you can have the screen facing out to monitor calls, msgs, etc. or you can have it face inward to prevent your screen's death due to evil table corners. there are notches to keep it from falling out.
and it wont. the clip has a curve bottom as well, to keep it from involuntary vehicle exit suicide. which is believed to be caused by occupants jumping in and out of there automobiles. but this has never been confirmed due to lack of witnesses.
-spring clip can be fully expanded and it will lock in place to easily attached or removed.
-belt catch is on the bottom so it won't slip. a.k.a. gypsy clip
- camera, phones jack, ports all have a poly carb gaurd that is flush with the rubber sleeve.
i ordered this thing 2 days before i did the phone on amazon prime so i figured surely i would have it first. Nope i actually had to sit on my hand for 2 days waiting for that case before i opened my phone. but i can say that my phone has never really experienced outside air.
i own the impact too. but i have never wanted to use it this is a great accessory. its worth 30 bucks i'd pay double that.
** if you are in any environment that you fear dust, dirt, abuse, water, kids, heat, beanie babies. this is the best protection offered. and it does add security to accidental loss for wearing it on your side. I will always buy these before my mobile gear everytime.

Do yourself a favor and save the time you will be spending if you get something else, then deciding that you don't like it, returning it, ordering what you should have ordered in the first place...... get the commuter case, it rocks balls!

rucurringintensity said:
defender
- yes the rubber does attract foreign particles. however i think we all can agree that all electronics share that feature...
but you can just rinse it off while it dries your phone is still fully protected.
-screen protector is built into the shell. no squeegee's. NO bubbles. NO glare!
-fully enclosed and port plugs ( commuter has plugs )
-360 swivel belt clip.
personally i really enjoy this clip/case for its dual face design. you can have the screen facing out to monitor calls, msgs, etc. or you can have it face inward to prevent your screen's death due to evil table corners. there are notches to keep it from falling out.
and it wont. the clip has a curve bottom as well, to keep it from involuntary vehicle exit suicide. which is believed to be caused by occupants jumping in and out of there automobiles. but this has never been confirmed due to lack of witnesses.
-spring clip can be fully expanded and it will lock in place to easily attached or removed.
-belt catch is on the bottom so it won't slip. a.k.a. gypsy clip
- camera, phones jack, ports all have a poly carb gaurd that is flush with the rubber sleeve.
i ordered this thing 2 days before i did the phone on amazon prime so i figured surely i would have it first. Nope i actually had to sit on my hand for 2 days waiting for that case before i opened my phone. but i can say that my phone has never really experienced outside air.
i own the impact too. but i have never wanted to use it this is a great accessory. its worth 30 bucks i'd pay double that.
** if you are in any environment that you fear dust, dirt, abuse, water, kids, heat, beanie babies. this is the best protection offered. and it does add security to accidental loss for wearing it on your side. I will always buy these before my mobile gear everytime.
Click to expand...
Click to collapse
Hell yes get the defender case ur gonna love this case, also go to amazon and get it for $30 thats the best deal ever!!!!! and u can use the clip as a kickstand so thats the best case in the world!

I think of the defender case up last night. So far so good. I always always run the on otter box cases is on my phones between the commuter and the defender you can't go wrong
Sent from my MB860 using XDA App

Since you said you probably wont drop it and just want a little protection, I would go with the BodyGlove (if the Feather is not an option). Good grip, decent protection, and little added bulk.
I happen to have one for sale too

http://www.amazon.com/s/ref=nb_sb_s...fix=rugged+battery+door+for+motorola+atrix+4g
one of those on the first row. it's Motorola, and its a replacement battery door that also goes around the side edges (covers everything but the screen). NO added bulk, seems perfect

I had the Impact which was nice but flimsy didn't feel great and top and bottom unprotected. Just got the Commuter and love it! Feels great looks great much better protection for $22 delivered from Ebay and the ports are covered!
Sent from my MB860 using XDA App

i have the commuter on order, will write about how i feel about it once i get it!

I've been liking my bodyglove, had it for a few days, like the added grip and its not too bulky
Sent from my MB860 using XDA App

This review was classic
rucurringintensity said:
defender
- yes the rubber does attract foreign particles. however i think we all can agree that all electronics share that feature...
but you can just rinse it off while it dries your phone is still fully protected.
-screen protector is built into the shell. no squeegee's. NO bubbles. NO glare!
-fully enclosed and port plugs ( commuter has plugs )
-360 swivel belt clip.
personally i really enjoy this clip/case for its dual face design. you can have the screen facing out to monitor calls, msgs, etc. or you can have it face inward to prevent your screen's death due to evil table corners. there are notches to keep it from falling out.
and it wont. the clip has a curve bottom as well, to keep it from involuntary vehicle exit suicide. which is believed to be caused by occupants jumping in and out of there automobiles. but this has never been confirmed due to lack of witnesses.
-spring clip can be fully expanded and it will lock in place to easily attached or removed.
-belt catch is on the bottom so it won't slip. a.k.a. gypsy clip
- camera, phones jack, ports all have a poly carb gaurd that is flush with the rubber sleeve.
i ordered this thing 2 days before i did the phone on amazon prime so i figured surely i would have it first. Nope i actually had to sit on my hand for 2 days waiting for that case before i opened my phone. but i can say that my phone has never really experienced outside air.
i own the impact too. but i have never wanted to use it this is a great accessory. its worth 30 bucks i'd pay double that.
** if you are in any environment that you fear dust, dirt, abuse, water, kids, heat, beanie babies. this is the best protection offered. and it does add security to accidental loss for wearing it on your side. I will always buy these before my mobile gear everytime.
Click to expand...
Click to collapse
Sent from my MB860 using XDA Premium App

vin791 said:
http://www.amazon.com/s/ref=nb_sb_s...fix=rugged+battery+door+for+motorola+atrix+4g
one of those on the first row. it's Motorola, and its a replacement battery door that also goes around the side edges (covers everything but the screen). NO added bulk, seems perfect
Click to expand...
Click to collapse
Do you have these? I wonder how they fit on the vehicle and multimedia docks.

LastQuark said:
Do you have these? I wonder how they fit on the vehicle and multimedia docks.
Click to expand...
Click to collapse
Comes with an insert for the std/media docks. From what I have seen the car dock would most likely still work fine.

I tried the Impact case for a week. It's not snug on the phone and has a tendency to slip off the bottom corners. The impact-absorbing aspect of the phone is excellent however. The thick silicone case can absorb shock quite well.
I returned it. I'm waiting on a Seidio Innocase. Was thinking about the Commuter, but I wanted something a bit thinner.

dam. i jsut bought the impact of amazon for 10 bucks. should oof bought a tpu case instead then.

Need Something Similar To Otterbox

I really need some advice, I usually swear by OtterBox but they have of course not released any cases for the 10 and if you listen to them they say that they don't have it in their plans. So my question is what is the best case I get as an alternative to an OtterBox? I'm looking for something with a similar level of protection. I tried the unicorn beetle pro but I don't like it because there's plastic on the back of the case that makes it very slippery when placed on a surface, I miss the grip that the OtterBox had on the back of the case. Also I need a belt clip.
I just ordered one of these
http://www.amazon.com/Holster-Protec...ilpage_o00_s00
What worries me however is that cheap price
What recommendations do you guys have? Thank you so much in advance

Mark112887 said:
I really need some advice, I usually swear by OtterBox but they have of course not released any cases for the 10 and if you listen to them they say that they don't have it in their plans. So my question is what is the best case I get as an alternative to an OtterBox? I'm looking for something with a similar level of protection. I tried the unicorn beetle pro but I don't like it because there's plastic on the back of the case that makes it very slippery when placed on a surface, I miss the grip that the OtterBox had on the back of the case. Also I need a belt clip.
I just ordered one of these
http://www.amazon.com/Holster-Protec...ilpage_o00_s00
What worries me however is that cheap price
What recommendations do you guys have? Thank you so much in advance
Click to expand...
Click to collapse
The Amazon side seems to be unavailable already...
Well, I'm an otterbox fan too. Sad there are no news about an otterbox for the 10. Check out the specific thread about cases... Just found something similar to Otterbox there...
http://www.amazon.com/SUPCASE-Full-...etle htc 10&qid=1462899739&ref_=sr_1_1&sr=8-1
Maybe that will cover our needs until there will be an otterbox in the future.
I ordered also an Incipio dual pro case, which is really nice but not so good like otterbox. I still don't have the device.. But the cases :laugh:
What I can't recommend is oeago double layer case... Ordered that too, but this is really hard plastic and I guess the device will get scratches easily with that one.
Edit... Just reread your post :angel:... Didn't saw your review about the Unicorn... Just ordered that one... So you don't recommend it?

Get this, you'll thank me later: http://www.amazon.com/SUPCASE-Full-...qid=1463161450&sr=8-1&keywords=htc+10+supcase
Only thing I would recommend you do is remove the screen protector from the case (it's just held on with glue) that way you can use whatever protector you choose. These cases are WAY better than Otterboxes.

i have the unicorn beetle ( above post links) its just a good as a otter box you will not be disappointed. best case I found for the 10 so far imo

In my original post I said that I have already tried that case
I tried the unicorn beetle pro but I don't like it because there's plastic on the back of the case that makes it very slippery when placed on a surface, I miss the grip that the OtterBox had on the back of the case
Click to expand...
Click to collapse
I had high hopes for that case but unfortunately it's not as good as it appears to be

afuller42 said:
i have the unicorn beetle ( above post links) its just a good as a otter box you will not be disappointed. best case I found for the 10 so far imo
Click to expand...
Click to collapse
Weird question, but can you put the phone in the belt clip with the screen facing out?
Hopefully that works, second question does it hold well?
Matt
Sent from my HTC_M10h using XDA-Developers mobile app

dtswk said:
Weird question, but can you put the phone in the belt clip with the screen facing out?
Hopefully that works, second question does it hold well?
Matt
Sent from my HTC_M10h using XDA-Developers mobile app
Click to expand...
Click to collapse
The belt clip holds absolutely fine, I'm pretty sure that you can put the phone in the case either way but I think it's specifically designed to be put in with the screen facing inward. The only complaint I have the back of the phone is not 100% all silicone. The back of the case has hard plastic on it that makes it slide across surfaces very easily
It's worth mentioning that the phone does not clip into the belt holster as firmly as OtterBox's do, I think it's pretty clear that the case is considered a clone. Be careful because I would say that if you drop the phone from more than about maybe 10 feet in the air it may pop out of the belt clip

Mark112887 said:
The belt clip holds absolutely fine, I'm pretty sure that you can put the phone in the case either way but I think it's specifically designed to be put in with the screen facing inward. The only complaint I have the back of the phone is not 100% all silicone. The back of the case has hard plastic on it that makes it slide across surfaces very easily
It's worth mentioning that the phone does not clip into the belt holster as firmly as OtterBox's do, I think it's pretty clear that the case is considered a clone. Be careful because I would say that if you drop the phone from more than about maybe 10 feet in the air it may pop out of the belt clip
Click to expand...
Click to collapse
Would you mind testing it does clip in face out please. Then I can order one.
Sent from my HTC_M10h using XDA-Developers mobile app

dtswk said:
Would you mind testing it does clip in face out please. Then I can order one.
Sent from my HTC_M10h using XDA-Developers mobile app
Click to expand...
Click to collapse
I would but unfortunately I do not have the case anymore, I returned it this morning out of frustration. As good as they try to be the sad truth is there is just no replacement for an OtterBox. I guess this is just the consequence of buying a phone so early, I'm hoping that within the next few months OtterBox releases a defender series Case for this phone, as soon as they do I'm all all over it
I'll try to explain as best I can, the belt clip on the beetle does not snap in, it is more of a friction fit I'm almost certain that you can put the phone in with the screen facing outward however when you do you will have to touch the screen with your fingers in order to get it out of the belt clip. The case is really a knockoff of the OtterBox defender, I had high hopes for it when I ordered it as well and despite the fact that I tried to get myself to like it I just couldn't

it says it will damage it if you do it face forward. waiting for jcase to return my phone so couldn't try it

Mark112887 said:
I would but unfortunately I do not have the case anymore, I returned it this morning out of frustration. As good as they try to be the sad truth is there is just no replacement for an OtterBox. I guess this is just the consequence of buying a phone so early, I'm hoping that within the next few months OtterBox releases a defender series Case for this phone, as soon as they do I'm all all over it
I'll try to explain as best I can, the belt clip on the beetle does not snap in, it is more of a friction fit I'm almost certain that you can put the phone in with the screen facing outward however when you do you will have to touch the screen with your fingers in order to get it out of the belt clip. The case is really a knockoff of the OtterBox defender, I had high hopes for it when I ordered it as well and despite the fact that I tried to get myself to like it I just couldn't
Click to expand...
Click to collapse
You really returned it because it would slide around on it's back? Are you usually on a boat or something that would cause things that are laying on a flat surface to slide around on their own cause I honestly don't understand why that would be an issue, but in the past there would be pads of TPU on the corners of the phone so it would never have been able to do something like that.
Anyway, if a belt clip wasn't so important I would recommend Supcase's Unicorn Beetle Hybrid case (once it finally comes out) It's the other's little brother and is my absolute go-to for my past 4 or so devices. It is similar to the UAG cases, but they look and feel much better.
To be honest the protection that your case and the Otterbox offers is complete overkill. Btw, I absolutely hate the rubber material that Otterbox uses... talk about junk.

tkoreaper said:
You really returned it because it would slide around on it's back? Are you usually on a boat or something that would cause things that are laying on a flat surface to slide around on their own cause I honestly don't understand why that would be an issue, but in the past there would be pads of TPU on the corners of the phone so it would never have been able to do something like that.
Anyway, if a belt clip wasn't so important I would recommend Supcase's Unicorn Beetle Hybrid case (once it finally comes out) It's the other's little brother and is my absolute go-to for my past 4 or so devices. It is similar to the UAG cases, but they look and feel much better.
To be honest the protection that your case and the Otterbox offers is complete overkill. Btw, I absolutely hate the rubber material that Otterbox uses... talk about junk.
Click to expand...
Click to collapse
I understand your point of view don't get me wrong. Yes I really returned it because it would slide around on its back, I need a casecase with some kind of grip. I don't go on a boat or anything but I'm in a wheelchair and I've had several instances where things started sliding around whenever I'm doing what I need to do. To be honest I've been using OtterBox's for so long that I've gotten used to them. I know where you're coming from when you talk about the silicone but to be honest I've never had any issue with OtterBox giving me a hard time about replacing it for me when need be
Some people consider the protection that an OtterBox defender offers as being overkill but I remember back in 2015 I accidentally ran over my OtterBox and I'll tell you what after that I was convinced that the case had just paid for itself, I had to get a new one because the case was broke but the phone was completely fine