Hey I had a ics ROM and then I restored a Ginger Bread backup. Do I have to do anything. It worked and just put everything back the way it was before I flashed the ics ROM.
stock?
Paden32 said:
Hey I had a ics ROM and then I restored a Ginger Bread backup. Do I have to do anything. It worked and just put everything back the way it was before I flashed the ics ROM.
Click to expand...
Click to collapse
Do you mean stock? As in the way it was when you first bought it?
---------- Post added at 11:49 AM ---------- Previous post was at 11:42 AM ----------
Well if you did want it bone stock again but with ROOT then I have a link that takes you to Zedomax's website where he has a download that includes root: http://epic4gtouchroot.com/epic-4g-touch-root/how-to-root-galaxy-s2-epic-4g-touch-newsph-d710/
To do it just follow the instructions and it will remove everything off of the phone and return it to stock W/root. To remove root just download ES file manager from the "Play Store", I hate that name, and then find the superuser.apk and remove it.
He says how to do this on his website. That's actually how I got into flashing and rooting and all this nonsense. ^^b
Make sure you put you phone into download mode before you connect your phone and also make sure you have KIES with the drivers installed on your computer.
I flashed a ics ROM and did not like it so I restored a android backup of the blazer 4.0 ROM.
As much as I am confused by the OP, anyone else think it's wierd that someone would link to some other site for getting back to stock on XDA? What with all the resources available right here?
Sent from my calculator watch.
Paden32 said:
I flashed a ics ROM and did not like it so I restored a android backup of the blazer 4.0 ROM.
Click to expand...
Click to collapse
Is everything working? Either you already know what you're doing... or you're very lucky.
Sent from my calculator watch.
I just wanted to know that since I restored a Android backup did I mess anything up. Or am I good to go.
lol
kingdazy said:
As much as I am confused by the OP, anyone else think it's wierd that someone would link to some other site for getting back to stock on XDA? What with all the resources available right here?
Sent from my calculator watch.
Click to expand...
Click to collapse
The thing you have to remember is I've been on here less then a month and I used that other website as my learning tool so it's all I know! ^^
I would use this website but I'm finding it impossible to find anything since this is the first forum I've ever joined/been on.
Excuse me if I've offended anyone it wasn't intentional I'm just trying to be helpful.
Nabbu said:
The thing you have to remember is I've been on here less then a month and I used that other website as my learning tool so it's all I know! ^^
I would use this website but I'm finding it impossible to find anything since this is the first forum I've ever joined/been on.
Excuse me if I've offended anyone it wasn't intentional I'm just trying to be helpful.
Click to expand...
Click to collapse
No, no offense taken, at all, helpful is helpful, and always appreciated.
Check "sfhub"s posts in the development section. He has Very easy "one click" restore downloads, and "qbking"s videos on YouTube, he's a favorite here for super easy walkthroughs on doing Anything et4g related. ;-)
The reason I was concerned about the op was that Many people have been getting permanent bricks doing what he says he did, so check out a sticky thread in general titled " how not to brick your et4g ".
Sent from my calculator watch.
I guess im good to go. I just wanted to know it if was safe for me to flash a ics ROM I am waiting for a stable ROM.
Hate to say it Paden, but your posts have not been very clear.
When posting here, it's very important to be very detailed about what rom you're on, what you flashed, in what order, and any symptoms or problems you are having.
If I've got it correctly...
You flashed some ICS rom, didn't like it, then flashed back to Blazer's?
And things are working?
You didn't do a complete stock restore first?
What recovery was built into the ICS rom?
What kind of wiping did you do before flashing?
And why are you looking for another ics ROM to flash to?...
Sent from my calculator watch.
very cool
kingdazy said:
No, no offense taken, at all, helpful is helpful, and always appreciated.
Check "sfhub"s posts in the development section. He has Very easy "one click" restore downloads, and "qbking"s videos on YouTube, he's a favorite here for super easy walkthroughs on doing Anything et4g related. ;-)
The reason I was concerned about the op was that Many people have been getting permanent bricks doing what he says he did, so check out a sticky thread in general titled " how not to brick your et4g ".
Sent from my calculator watch.
Click to expand...
Click to collapse
I appreciate that a bunch I've been wandering around for forever trying to find the one-click restore. I watch QBking77 on youtube all the time like everyone else because he guides us with his syndicated wisdomness. ^^ lol
Thanks again!
Nabbu said:
I appreciate that a bunch I've been wandering around for forever trying to find the one-click restore. I watch QBking77 on youtube all the time like everyone else because he guides us with his syndicated wisdomness. ^^ lol
Thanks again!
Click to expand...
Click to collapse
Play around with the Search at the top of threads to help find stuff too. Searching can be a little odd on here at times but once you get used to it, it really helps.
Paden32 said:
I flashed a ics ROM and did not like it so I restored a android backup of the blazer 4.0 ROM.
Click to expand...
Click to collapse
Wouldn't try that again with the method you used! Judging by your question i think you know that methods more dangerous than unprotected sex with a hooker on a drunken Saturday night... Don't do it!
I flash ics roms while on blazer 4.0 then restore back to blazer n never had a problem n ive done it more then 10 Times.. So from gb recovery i flash ics roms then from ics recovery i restore blazer 4.0 never been had a problem
tr1zrus said:
I flash ics roms while on blazer 4.0 then restore back to blazer n never had a problem n ive done it more then 10 Times.. So from gb recovery i flash ics roms then from ics recovery i restore blazer 4.0 never been had a problem
Click to expand...
Click to collapse
When devs have said don't use ics with cwm that's what had been causing bricks ... I would say not to use it but do what u want , but if I see you post about a brick oh my gosh will you get laughed out of the place
Sent from my SPH-D710 using Tapatalk 2 Beta-4
Did you not read it correct i said i flash ics roms thru gb recovery i never said i flash ics roms while on ics recovery
tr1zrus said:
Did you not read it correct i said i flash ics roms thru gb recovery i never said i flash ics roms while on ics recovery
Click to expand...
Click to collapse
How do you do that
I was going to post a thread asking a similar question. I've been running blazer for a while, and eventually I downloaded the Goodness and ran with it for a week. It was nice and all but for the moment I still prefer GB...however, my nandroid backup didn't work, it told me I had an MD5 mistmatch. So I just went into the ICS recovery and reflashed Blazer no problem. It's been perfect since. Afterwards I was reading the thread on how to not brick your phone, and it said to do exactly the opposite of that. Does that make me the luckiest man in the world? or am I missing something. Would it be okay to try it again?
MultiLockOn said:
How do you do that
I was going to post a thread asking a similar question. I've been running blazer for a while, and eventually I downloaded the Goodness and ran with it for a week. It was nice and all but for the moment I still prefer GB...however, my nandroid backup didn't work, it told me I had an MD5 mistmatch. So I just went into the ICS recovery and reflashed Blazer no problem. It's been perfect since. Afterwards I was reading the thread on how to not brick your phone, and it said to do exactly the opposite of that. Does that make me the luckiest man in the world? or am I missing something. Would it be okay to try it again?
Click to expand...
Click to collapse
It's all luck, the current ICS recovery is very iffy on flashing and even wiping data is bricking some devices, if you want to continue using your phone I suggest making a nandroid backup before you flash ICS then flash ICS, and if you wish to go back to GB then ODIN to EL29 and install clockwork mod and restore nandroid, or it won't be long before you have some fancy paperweight.
MultiLockOn said:
How do you do that
Make sure u do a nandroid back up using the gb recovery before u try these steps...... Simple lets saY u are on blazers 4.0 rom n u have a zip of a ics rom put it on your sdcard go into recovery n do a full wipe i use calkins full wipe then i flash the ics rom keep in mind that after you flash the ics rom you will lose your gb recovery n you will have a ics recovery n if you don't like the ics rom u can go to the ics recovery n restore ur nandroid backup make sure to do a full wipe before restoring your backup n when you finish your restore you will have your gb rom n ur gb recovery... Ive done this like a million times n never had a problem BUT DO THIS AT YOUR OWN RISK... ONE MORE THING I NEVER FLASH ANY ROM USING A ICS RECOVERY
Click to expand...
Click to collapse
As long a your just restoring a backup from ics recovery you're fine, it may be a problem when flashing roms from it that results to bricking. So if i read right from your beginning post all you did was just restore so you're fine.
Related
So I'm still pretty new on the E4GT forums, having recently come over from a Nexus one, which was quite a bit easier to mess with as far as ROM's are concerned, and much less easy to brick. About the only thing that could brick an N1 was flashing a radio, and new radio's didn't come out that often, so no big deal.
I'm currently running Calkulins EL29 mod with an FC14 modem on my E4GT, but I'm really wanting to mess with the testing builds of CM9, I really miss CM. All the steps seems to spread out across multiple threads, so I want to make sure I do it correctly so as not to brick.
1. nandroid backup, backup, backup
2. boot to download mode
3. load stock cwm el26 through odin
4. flash cm9 zip
5. mess around with it.
Where I'm a little confused is how to get back to where I was should I decide to wait some more. How do I get back to the EL29 CWM so that I can then restore the nandroid backup? Also, will I need to flash different modems again, or can I stick with the fc14 modem through all of this?
Please understand that I'm not a total n00b at all of this, been flashing all kinds of ROM's on my old Nexus one for two years, just don't have much experience with Sammy devices.
You just want too flash roms and themes?
Sent from my SPH-D710 using xda premium
I would also like to know the answer to this.. I'm terrified to flash or odin any ics-based roms because I don't want to brick my phone like a lot of others have
Sent from my SPH-D710 using XDA Premium App
ScubaSteev said:
You just want too flash roms and themes?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Themes, not really, but ROM's yes. It's just a bit confusing cause I see things like, you need this CWM for this, you need to flash this, or you need to Odin that, you need this specific CWM for this, or you need to get back to stock before you fan flash or Odin this or that.
But what I'm really wanting help with at this moments, is the testing build of CM9, and then how to get back if I don't like it at this time.
Ok....I download roms straight from xda app and then I go to recovery......do a full wipe....wipe data/wipe dalvic/wipe cache/wipe battery stats.........then I install .zip (rom) then reboot.....that's all I do,its pretty simple
Sent from my SPH-D710 using xda premium
ScubaSteev said:
Ok....I download roms straight from xda app and then I go to recovery......do a full wipe....wipe data/wipe dalvic/wipe cache/wipe battery stats.........then I install .zip (rom) then reboot.....that's all I do,its pretty simple
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
The problem is that CM9 is an ICS ROM, you can't just flash willy nilly as there are a lot of reports of people bricking their phones cause they didn't use the right recovery. How to flash CM9 on is not my problem, it's how to get back to EL29 if I don't like the current testing build of CM9.
Ohh yeah....I don't mess with that stuff lol,can't take a chance.......but everyone says don't.
And I love cm7 can't wait for cm9 to be stable
Sent from my SPH-D710 using xda premium
Check out QBKing77 on YouTube. He has very simple videos about how to get back to stock after flashing ROMs, his guidance taught me everything. But don't let my noob-ness detour you, they are great videos.
Sent from my SPH-D710 using xda premium
xerxax said:
Check out QBKing77 on YouTube. He has very simple videos about how to get back to stock after flashing ROMs, his guidance taught me everything. But don't let my noob-ness detour you, they are great videos.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
People, please read my OP, I'm already rooted and running a custom gingerbread rom and recovery. I'm wanting to run CM9, but it may not be stable enough for me, so I'm wanting to know what the steps are to get back to my custom gingerbread rom should I decide to go back.
garfnodie said:
People, please read my OP, I'm already rooted and running a custom gingerbread rom and recovery. I'm wanting to run CM9, but it may not be stable enough for me, so I'm wanting to know what the steps are to get back to my custom gingerbread rom should I decide to go back.
Click to expand...
Click to collapse
The guy you just quoted... just told you where to find that information. :what:
This has been discussed ad nauseum all over the forums, and if you do a bit of research you will find the exact procedure. Since I'm on my phone, kinda a pain to type it all out. But he's right, the point is to get back to stock GB rom before restoring any GB nandroids. (specifically before wiping any partitions, but that's yet another long explanation.) This issue And procedure is the same for ICS leaks, for cm9, for AOKP.
Look for a sticky thread in general titled "how not to brick your phone" or something.
Or, god forbid, actually read one of the ICS/cm9/AOKP/leak threads. I swear, every third page you will see someone ask this and the process described.
And QBKING77s videos have a step by step explanation for this as well. Really the best way.
And yes, you can keep the modem, no matter what rom/kernel you run. Same thing as a "radio".
Sent from my calculator watch.
kingdazy said:
The guy you just quoted... just told you where to find that information. :what:
This has been discussed ad nauseum all over the forums, and if you do a bit of research you will find the exact procedure. Since I'm on my phone, kinda a pain to type it all out. But he's right, the point is to get back to stock GB rom before restoring any GB nandroids. (specifically before wiping any partitions, but that's yet another long explanation.) This issue And procedure is the same for ICS leaks, for cm9, for AOKP.
Look for a sticky thread in general titled "how not to brick your phone" or something.
Or, god forbid, actually read one of the ICS/cm9/AOKP/leak threads. I swear, every third page you will see someone ask this and the process described.
And QBKING77s videos have a step by step explanation for this as well. Really the best way.
And yes, you can keep the modem, no matter what rom/kernel you run. Same thing as a "radio".
Sent from my calculator watch.
Click to expand...
Click to collapse
I did some searching, and everything I found says to get back to stock, I didn't see where it said that you have to get back to stock first before you can then restore a nandroid.
This is not how it was done on the Nexus One, so it's new to me.
garfnodie said:
I did some searching, and everything I found says to get back to stock, I didn't see where it said that you have to get back to stock first before you can then restore a nandroid.
This is not how it was done on the Nexus One, so it's new to me.
Click to expand...
Click to collapse
Ics kennels with cwm have been bricking phones ....some just by wiping data ...they corrupt your data partition making it impossible to write to ..jtag doesn't even work on it...so we have been Odin back to stock GB and go from there
Sent from my SPH-D710 using xda premium
You may want to read this if you haven't already:
How Not To Brick Your E4GT
Now that it has been stickied the OP went through and updated the first post to cover most of I believe you are trying to find out. Hope this helps!
Epix4G said:
Ics kennels with cwm have been bricking phones ....some just by wiping data ...they corrupt your data partition making it impossible to write to ..jtag doesn't even work on it...so we have been Odin back to stock GB and go from there
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
That's what I've been seeing, which is why I want to make sure I do it right. I don't even know what jtag is, had to look it up. Some kind of debugging tool from I found.
garwynn said:
You may want to read this if you haven't already:
How Not To Brick Your E4GT
Now that it has been stickied the OP went through and updated the first post to cover most of I believe you are trying to find out. Hope this helps!
Click to expand...
Click to collapse
I'll definitely give it good read. Thanks.
new to epic touch 4g...well actually its my friends....anyway i rooted it just fine...installed what i thought was the correct CWM...when i got into recovery it looked different than any other CWM ive ever used. Said team rogue or something. Thought i could try to flash in that recovery. Turns out i couldnt lol all flashes aborted. and then i was unable to boot up. Odin back to stock rooted. Which CWM is correct???
EDIT: also tried flashing CWM in rom manager. It boots me to the triangle and thats it
This works well http://forum.xda-developers.com/showthread.php?t=1342728
Option C for Gingerbread or D for ICS
v2.2v said:
new to epic touch 4g...well actually its my friends....anyway i rooted it just fine...installed what i thought was the correct CWM...when i got into recovery it looked different than any other CWM ive ever used. Said team rogue or something. Thought i could try to flash in that recovery. Turns out i couldnt lol all flashes aborted. and then i was unable to boot up. Odin back to stock rooted. Which CWM is correct???
EDIT: also tried flashing CWM in rom manager. It boots me to the triangle and thats it
Click to expand...
Click to collapse
Yikes! OK, it all depends on what you are trying to flash. Rogue works great for Gingerbread builds. The Epic Touch has recovery built into the kernel, so you can't really just mix and match. You have to have the kernel with the recovery in it. Read up about which rom you are trying to install before doing anything. The AOSP stuff requires you use the el26 "Stock" CWM. Stock refers to it is an unmodified ClocckworkMod, unlike Rogue. There is also a thread about how to not brick your e4gt, I highly recommend you read that as well. Of course, I've learned that doing anything with anyones phone other than your own will often end in disaster as well lol "Dude, why doesn't blah blah blah work?" Usually a quick fix for those in the know, but if the person can't do it themselves, they just get frustrated and mad at the @$$hole that messed up their phone lol Good luck
Specialksg1 said:
Of course, I've learned that doing anything with anyones phone other than your own will often end in disaster as well lol "Dude, why doesn't blah blah blah work?" Usually a quick fix for those in the know, but if the person can't do it themselves, they just get frustrated and mad at the @$$hole that messed up their phone lol Good luck
Click to expand...
Click to collapse
This goes DOUBLE for spouses, TRIPLE if they're not tech savvy. (Personal experience)
garwynn said:
This goes DOUBLE for spouses, TRIPLE if they're not tech savvy. (Personal experience)
Click to expand...
Click to collapse
Absolutely! Rooted my wife's evo and put CM7 on it a while ago, learned that lesson very quickly! No matter how much you try to warn them that some things might be a bit weird or might not work, they always be shocked if anything isn't exactly the way they had it before. She has an iphone now ... and I refuse to learn how to jailbreak it
Specialksg1 said:
Yikes! OK, it all depends on what you are trying to flash. Rogue works great for Gingerbread builds. The Epic Touch has recovery built into the kernel, so you can't really just mix and match. You have to have the kernel with the recovery in it. Read up about which rom you are trying to install before doing anything. The AOSP stuff requires you use the el26 "Stock" CWM. Stock refers to it is an unmodified ClocckworkMod, unlike Rogue. There is also a thread about how to not brick your e4gt, I highly recommend you read that as well. Of course, I've learned that doing anything with anyones phone other than your own will often end in disaster as well lol "Dude, why doesn't blah blah blah work?" Usually a quick fix for those in the know, but if the person can't do it themselves, they just get frustrated and mad at the @$$hole that messed up their phone lol Good luck
Click to expand...
Click to collapse
I GOT IT!! lol I had to revert back to el26...nevertheless i was able to boot into the ACTUAL cwm after flashing another file through this http://forum.xda-developers.com/showthread.php?t=1342728...just installed cyanogenmod on his thank you very much you guys. much appreciated...didnt want to pay my friend money for his epic lol considering the money i just dropped on my Gnexus
I'm new to the rooting game as well for the EG4T. The Rogue part sounds right, it most likely had more to do with the version you used. I made the same mistake once.
My best tip would be to use QBKing77's tutorial videos and follow them step-by-step....he has one for pretty much any situation and explains things very well. They are a lifesaver. Also, since it's your friend's phone, maybe stick to GB ROMs as they seem to require the fewest tweaks and have the least FCs. If you absolutely have to have ICS, my choice on ROM would be Venum's Anaconda ROM, which was just released yesterday. It is nothing short of brilliant. However, once you go to ICS, I believe you need to start from scratch (stock) if you want to go back to GB. I hear it's a big no-no to try and recover GB from an ICS ROM (most likely what you did). Best of luck.
ChiTown29 said:
I'm new to the rooting game as well for the EG4T. The Rogue part sounds right, it most likely had more to do with the version you used. I made the same mistake once.
My best tip would be to use QBKing77's tutorial videos and follow them step-by-step....he has one for pretty much any situation and explains things very well. They are a lifesaver. Also, since it's your friend's phone, maybe stick to GB ROMs as they seem to require the fewest tweaks and have the least FCs. If you absolutely have to have ICS, my choice on ROM would be Venum's Anaconda ROM, which was just released yesterday. It is nothing short of brilliant. However, once you go to ICS, I believe you need to start from scratch (stock) if you want to go back to GB. I hear it's a big no-no to try and recover GB from an ICS ROM (most likely what you did). Best of luck.
Click to expand...
Click to collapse
lol i cant believe how much more effort goes into switching a rom on this phone is compared to a nexus...its just flash and go on the nexus. i successfully flashed CM9 alpha 2 but he requested an OC kernel. im on cm9 alpha 2 on EL26...can i just flash anaconda over this with wipe? and what kernel is suggested? thanks guys u have made my day
Specialksg1 said:
Absolutely! Rooted my wife's evo and put CM7 on it a while ago, learned that lesson very quickly! No matter how much you try to warn them that some things might be a bit weird or might not work, they always be shocked if anything isn't exactly the way they had it before. She has an iphone now ... and I refuse to learn how to jailbreak it
Click to expand...
Click to collapse
I learned the same thing when the Optimus S had a firmware update - it was later pulled but the damage was done. So I did what I could - found a stable tweaked ROM and put it on there. I've always believed in wiping the phone before flashing - BIG MISTAKE. "Where's my messages? Where's my files?"
Funny thing about this is that they fixed the last FW update with another one that rolls out today. I know I'm going to have to flash this one but I'll be using TB to back up what I can before I flash it. Also have to figure out how to save her SMS, that's the #1 thing that will avoid a mad wife!
v2.2v said:
lol i cant believe how much more effort goes into switching a rom on this phone is compared to a nexus...its just flash and go on the nexus. i successfully flashed CM9 alpha 2 but he requested an OC kernel. im on cm9 alpha 2 on EL26...can i just flash anaconda over this with wipe? and what kernel is suggested? thanks guys u have made my day
Click to expand...
Click to collapse
There aren't any kernels that overclock for ICS yet. I am not sure on this but the paid Tegrak Ultimate app allows overclocking of stock kernels we have but I haven't tried it on CM9 yet.
Once we get the ICS kernel source, things will be a lot easier when it comes to flashing. I understand where you are coming from with the Nexus though. I basically wipe everything on my NS4G then flash the Euroskank CM9 nightly and all of my apps install automatically. We don't have it that easy on the Epic Touch but once we have a kernel built from source we will be able to wipe and flash without fear of any residual issues
Sent from my Nexus S 4G using XDA
JohnCorleone said:
There aren't any kernels that overclock for ICS yet. I am not sure on this but the paid Tegrak Ultimate app allows overclocking of stock kernels we have but I haven't tried it on CM9 yet.
Once we get the ICS kernel source, things will be a lot easier when it comes to flashing. I understand where you are coming from with the Nexus though. I basically wipe everything on my NS4G then flash the Euroskank CM9 nightly and all of my apps install automatically. We don't have it that easy on the Epic Touch but once we have a kernel built from source we will be able to wipe and flash without fear of any residual issues
Sent from my Nexus S 4G using XDA
Click to expand...
Click to collapse
gotcha thanks man. Since i have u right here...when i try to reboot into recovery it always takes me to stock recovery...i definitely flashed CWM correctly about an hour ago because i successfully flashed CM9...now it seems to be gone. I went to rom manager and tried flashing CWM again...but no luck. I want to install Anaconda for him and i cant! lol
JohnCorleone said:
There aren't any kernels that overclock for ICS yet. I am not sure on this but the paid Tegrak Ultimate app allows overclocking of stock kernels we have but I haven't tried it on CM9 yet.
Once we get the ICS kernel source, things will be a lot easier when it comes to flashing. I understand where you are coming from with the Nexus though. I basically wipe everything on my NS4G then flash the Euroskank CM9 nightly and all of my apps install automatically. We don't have it that easy on the Epic Touch but once we have a kernel built from source we will be able to wipe and flash without fear of any residual issues
Sent from my Nexus S 4G using XDA
Click to expand...
Click to collapse
That's one of the things I like about the cm9 builds lately. I did a fresh install of fd02 just to check it out and when I came back to cm9 it pulls in my setup I had before, right down to changing my wallpaper for me. No backups needed. I still have to go in and put in my username and passwords on some of them and I lose my Cut the Rope game data (Oh darn!!), but I love that my apps from the play store(calling the market the "play store" makes me feel dirty lol) automatically install.
v2.2v said:
gotcha thanks man. Since i have u right here...when i try to reboot into recovery it always takes me to stock recovery...i definitely flashed CWM correctly about an hour ago because i successfully flashed CM9...now it seems to be gone. I went to rom manager and tried flashing CWM again...but no luck. I want to install Anaconda for him and i cant! lol
Click to expand...
Click to collapse
OK, first things first. I will suggest you read a lot more before doing anything based on what I bolded above.
ROM Manager is generally discouraged and can cause a brick. Read more here:
http://forum.xda-developers.com/showpost.php?p=24318861&postcount=2
Hopefully you got to this in time.
Good luck and once again, please do not be afraid to ask questions before you do something. It's easier than taking your friend's phone to Sprint because it bricked.
Final Edit: Sorry if I'm coming off a little harsh, but there are MANY posts out there - far longer than the ICS brick issues - that have said ROM Manager is a no-no.
v2.2v said:
gotcha thanks man. Since i have u right here...when i try to reboot into recovery it always takes me to stock recovery...i definitely flashed CWM correctly about an hour ago because i successfully flashed CM9...now it seems to be gone. I went to rom manager and tried flashing CWM again...but no luck. I want to install Anaconda for him and i cant! lol
Click to expand...
Click to collapse
Like I said earlier, the recoveries are built into the kernel. Get the files you want to flash onto the sd card, then odin the el26 kernel. Before it reboots (ICS won't boot on a gb kernel, so you'll just boot loop anyway), go back into recovery and flash away.
Just whatever you do....dont flash with any Rogue ICS recovery, the source isnt avalable yet so its kinda like playing darts with a blindfold on and your friends are all drunk and not paying attention to whats going on around them.
Personally, I keep Rogue Stock EL29 (Odin version) on my sdcard and just use mobile odin to revert back to that when I need to flash (someone please let me know if this method is a bad one, so far it has worked fine though).
I haven't read up much on it, but I would avoid doing backups and restores of ICS roms via recovery until ICS is finalized (regardless of the recovery your using).
If you wanna play it safe, just stick with an EL29 rom until a final version of ICS is released, frankly I prefer stability over fancy new features and just like to test out the ICS leak for a little before odin'ing back to Rogue EL29 and restoring my gingerbread backup...it quite cool to watch the offical ICS mature and get fixed.
starnostar said:
Just whatever you do....dont flash with any Rogue ICS recovery, the source isnt avalable yet so its kinda like playing darts with a blindfold on and your friends are all drunk and not paying attention to whats going on around them.
Personally, I keep Rogue Stock EL29 (Odin version) on my sdcard and just use mobile odin to revert back to that when I need to flash (someone please let me know if this method is a bad one, so far it has worked fine though).
I haven't read up much on it, but I would avoid doing backups and restores of ICS roms via recovery until ICS is finalized (regardless of the recovery your using).
If you wanna play it safe, just stick with an EL29 rom until a final version of ICS is released, frankly I prefer stability over fancy new features and just like to test out the ICS leak for a little before odin'ing back to Rogue EL29 and restoring my gingerbread backup...it quite cool to watch the offical ICS mature and get fixed.
Click to expand...
Click to collapse
I'd probably go with el26 just because it's "stock" CWM and the devs are big on that recomendation.
Specialksg1 said:
I'd probably go with el26 just because it's "stock" CWM and the devs are big on that recomendation.
Click to expand...
Click to collapse
so just do the same odin restore back to stock el26 rooted...then it should autoboot into CWM and then flash anaconda...geesh lol
v2.2v said:
so just do the same odin restore back to stock el26 rooted...then it should autoboot into CWM and then flash anaconda...geesh lol
Click to expand...
Click to collapse
Don't have to do the whole odin restore. Just the kernel. Won't autoboot. Have to hold vol + and power. Like JC said, this will all become much simpler once we have sauce
Specialksg1 said:
Don't have to do the whole odin restore. Just the kernel. Won't autoboot. Have to hold vol + and power. Like JC said, this will all become much simpler once we have sauce
Click to expand...
Click to collapse
got it lol thanks a million man...seriously
Thanks for picking me up there guys!
Sent from my Nexus S 4G using XDA
I recently flashed Caulkin's 4.0 Rom for the e4gt and was wondering if its possible to flash touch recovery with the Rom? I would normally play around to figure it out, but figured I'd ask first so I can maybe avoid a brick.
Thanks in advance!
Sent from my SPH-D710 using XDA
Stryke_the_Orc said:
I recently flashed Caulkin's 4.0 Rom for the e4gt and was wondering if its possible to flash touch recovery with the Rom? I would normally play around to figure it out, but figured I'd ask first so I can maybe avoid a brick.
Thanks in advance!
Click to expand...
Click to collapse
Did you mean Calk's 1.4?
You shouldn't be using touch recovery with anything for risk of bricking your phone.
And if you're using ANY version of ICS, you also risk bricking your phone if you try to use any form of recovery.
tdunham said:
Did you mean Calk's 1.4?
You shouldn't be using touch recovery with anything for risk of bricking your phone.
And if you're using ANY version of ICS, you also risk bricking your phone if you try to use any form of recovery.
Click to expand...
Click to collapse
I agree with the first part, stay away from CWM9 touch. Youre asking to get bricked. CWM5-7 recover rogue is fine to use between ICS roms. Always run Calkins format all. And never use cwm.recovery to do a nand back to GB. Flash SFHUBS stock EL29 first via Odin..along with calk's format all prior to.that then nandroid back to your previous set up.
tdunham said:
Did you mean Calk's 1.4?
You shouldn't be using touch recovery with anything for risk of bricking your phone.
And if you're using ANY version of ICS, you also risk bricking your phone if you try to use any form of recovery.
Click to expand...
Click to collapse
Someone tell me why the F this hasn't been "fixed" yet? My last phone was an OG Droid and we didn't have to deal with the amount of 'you must wipe with this recovery, flash with this recovery, use ODIN to do this...' crap when we went from Eclair to FroYo and nothing ever got bricked... this is just ridiculous.
dandragonrage said:
Someone tell me why the F this hasn't been "fixed" yet? My last phone was an OG Droid and we didn't have to deal with the amount of 'you must wipe with this recovery, flash with this recovery, use ODIN to do this...' crap when we went from Eclair to FroYo and nothing ever got bricked... this is just ridiculous.
Click to expand...
Click to collapse
cuz the ics source isnt out for our phones yet. And frankly im just happy the were able to port ics without the source in the first place
dandragonrage said:
Someone tell me why the F this hasn't been "fixed" yet? My last phone was an OG Droid and we didn't have to deal with the amount of 'you must wipe with this recovery, flash with this recovery, use ODIN to do this...' crap when we went from Eclair to FroYo and nothing ever got bricked... this is just ridiculous.
Click to expand...
Click to collapse
You my friend sounds like a man who wants to fix it.... Can't complain(if your are complaining) about stuff that you yourself can not help on or fix.. If you don't like the procedure its not like you are being forced to do it... My bad I know I know I will shut up now
Edit: sorry OP I should of at least chimed in on your question.... If you want to use Touch recovery it tells me you have not read much in these forums so I would suggest you take a lil time and read the brick threads and stickys... Quite helpful
Thanks guys, you just saved me a huge headache lol. I only asked because i hate to lose a paid app, but better that than brick my phone.
Thanks again!
Sent from my SPH-D710 using XDA
dandragonrage said:
Someone tell me why the F this hasn't been "fixed" yet? My last phone was an OG Droid and we didn't have to deal with the amount of 'you must wipe with this recovery, flash with this recovery, use ODIN to do this...' crap when we went from Eclair to FroYo and nothing ever got bricked... this is just ridiculous.
Click to expand...
Click to collapse
Build a solid ics kernel for us then. Or wait until we get the official release. There is no fix because nothing is broken. All ics roms for this phone are built on leaked kernels.
But I'm sure your post was just sarcasm and you knew that since it's been spoken about in just about every ics rom thread.
Sent from my SPH-D710 using Tapatalk 2
I searched through the forums here and didn't find anything helpful. Probably because it has been a long time since 2.3 came out.
I have a stock Froyo Evo 4G (rooted). I would like to move up to 2.3.x
I find many sites online with instructions on doing it, and downloads, but I don't trust any of them. I only really trust what I read here at XDA.
That being said, can someone point me to instructions to do the update?
Also...what will I lose from the phone?
How do I re-root afterward?
When I use the phone to look for the system update it finds nothing, so I need a link to download the file(s) necessary.
Thanks in advance, I know I'm way behind the curve but my job just started using Office 365 with Lync, and it doesn't support 2.2.
Just flash a gingerbread ROM. Here's a link to an almost totally stock sprint rooted ROM. this thread may also have a truly stock sprint ROM.
http://forum.xda-developers.com/showthread.php?t=1321340
I would backup
from my 2yr old ICS Evo
Do NOT take an OTA update if you are rooted. Every single guide for rooting tells you this.
That being said, if you want to stay stock, fine the stock rooted GB rom in the stickies in the Dev section. Make a nandroid backup in recovery, then wipe everything, then flash. You will not lose root as long as you flash a rooted rom.
sitlet said:
Do NOT take an OTA update if you are rooted. Every single guide for rooting tells you this.
That being said, if you want to stay stock, fine the stock rooted GB rom in the stickies in the Dev section. Make a nandroid backup in recovery, then wipe everything, then flash. You will not lose root as long as you flash a rooted rom.
Click to expand...
Click to collapse
I will lose all my apps and text messages, right?
My contacts and email are all in Google/Exchange so there's no worry there.
Here's. Link to almost stock sprint ROM .
http://forum.xda-developers.com/showthread.php?t=1321340
your don't need to unroot or anything. Backup whatever stuff you wanna keep with Ti Backup or mybackup root. Wipe caches and data and flash ROM.
I think you may wanna update radios, too. Update to at least the 11.19 radio. All radios are available in Calkulins thread in dev section. I would say update radio first, but maybe someone else can chime in on if that really matters.
But, you don't need to unroot, reroot, blah blah blah. Just flash updated ROM. When updating radio, do NOT interrupt the flash. It's about the only thing that can truly brick your phone.
from my 2yr old ICS Evo
Also, the thread I linked may be the slightly modified stock ROM. If so , brad has another thread in the dev section that is for absolutely stock rooted GB ROM.
from my 2yr old ICS Evo
To save your text messages you can find SMS backup/restore in the market. Some use myBackup root for this, but I'm not familiar with it and can't advise.
from my 2yr old ICS Evo
Bro here's the best advice I can give you I'm gonna give you two roms that I stand by as the most stable
First of all if you still want sense on the evo and want 2.3 download mikg rom v3 go to themikmik.com and go to the evo section and there will be a lthread that says update 3.11 its in v3.xx forum. There will be a download link and download the one that's not the update version after that follow normal flashing rom procedure.
Now if you want pure gingerbread then I would go to cyanogenmod.com and go to evo and go to stable release and click on the newest one download and flash there are tons of helpful forums on flashing roms if anything reply and ill walk you through... Enjoy bro
DBRfitness said:
Now if you want pure gingerbread then I would go to cyanogenmod.com
Click to expand...
Click to collapse
That's funny, you misspelled "Deck's GB 1.3d" there.
Yeah, dude wasn't looking for a sense 3.0 rom, as far as I could tell.
Sent from my PC36100 using xda premium
scottspa74 said:
Yeah, dude wasn't looking for a sense 3.0 rom, as far as I could tell.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Its actually a sense 2.0 rom there 3.0 features so it still looks like original evo
postwick said:
I will lose all my apps and text messages, right?
My contacts and email are all in Google/Exchange so there's no worry there.
Click to expand...
Click to collapse
Texts can be backed up with SMS Backup and Restore. Apps and their data can be backed up and restored with Titanium Backup.
SilverZero said:
That's funny, you misspelled "Deck's GB 1.3d" there.
Click to expand...
Click to collapse
****, I thought the same thing.
Sent from my HTC Evo 4G using xda premium
Hook your self up with Decks 1.3d with the Mason kernel and apply CoD twesks and see if you ever go back.
Sent from my HTC Evo 4G using xda premium
Holy Cow your still running Froyo lol kid you best be keeping up with the game if your a sense user grab MIKG 3.11 amazing gb 2.35 with sense 2.1+ 3.0 its a great daily and since I'm guessing your not a big flasher... You won't need another rom for some time
Sent from my PC36100 using XDA
scottspa74 said:
Just flash a gingerbread ROM. Here's a link to an almost totally stock sprint rooted ROM. this thread may also have a truly stock sprint ROM.
http://forum.xda-developers.com/showthread.php?t=1321340
I would backup
from my 2yr old ICS Evo
Click to expand...
Click to collapse
This answered all my last questions, the fact that I had to downgrade from 2.3 unrooted, to 2.2 and then root, once rooted but back on froyo, I was wondering how to upgrade to Gingerbread... well this post opened my eyes, I just flashed digitalkarma's ROM and I am back to Gingerbread and rooted and with awesomeness written all over the place!
Just rooted phone using Odin el29 plus root now I would like to flash an ics ROM AOKP I need to know the latest method to get clock work mod on phone please help,,, please dying for a piece of ice cream
Sent from my SPH-D710 using xda app-developers app
Search for autoroot + cwm.. would link it but mobile atm..
Sent from my SPH-D710
kennwoodkenn said:
Just rooted phone using Odin el29 plus root now I would like to flash an ics ROM AOKP I need to know the latest method to get clock work mod on phone please help,,, please dying for a piece of ice cream
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
For starters you can use this gb kernel that will directly boot into cwm (won't boot system until something is flashed over it) : here
Then I suggest reading about some of the options available to kernel/recoveries that are safe to use to wipe/backup/restore once in ICS.
New and Need Your Help. Thank you.
Hello. I am brand new to this, but can follow directions really well. I Rooted my Galaxy S II EL29 w/o a problem and followed the directions here... http://forum.xda-developers.com/showthread.php?t=1721229... to get a ROM version of ICS.
Now, my questions are (After searching through the forum for two days):
What is the BEST and SAFEST way to try and install other leaked ROMs?
I currently have 'Android system recovery <3e>'. Do you recommend something better or stick with what I have?
Also, Which ROM do you believe is the best one that comes close (w/o bugs) to the latest ICS/Jelly Bean?
P.S. ~ How can I add Beats Audio after flashing a ROM?
Thank you in advance for your prompt replies.
So you have stock rooted FF18 Rom and kernel now. You need a kernel with custom recovery to flash anything. The safest way is to go to sfhub's thread where you got ICS tar file and click on the Auto Root link in that thread. That will tell you how to add Clockwork Mod recovery to the setup you have now. It's a script you run on your pc with the phone plugged in. Pretty easy and he explains it pretty thoroughly. After you have CWM, good idea to boot into recovery and backup your phone before you go any further. Hold volume up and power at the same time and hold them until you are in recovery mode. Select backup and let it run.
Once you've done that and want to get on another ICS Rom, flash Calkulin's format all zip made especially for this phone. It will wipe everything except your sd card in the proper order and has never bricked a phone as far as I know. It will clear all your apps and data the same way flashing the FF18 tar file did so you'll have to reinstall all your apps. Get it here.
http://db.tt/sUM1uH72
When the format all its done, flash your new Rom. Wicked Sensations and Agat63's Rom are a couple of my favorites but there are several I haven't tested yet. If you want to try AOKP roms or Cyanogen Mod, better do more reading. They are different animals than the Touchwiz based roms so you have to know what you are doing with the recoveries on those.
We don't have jelly bean for this phone yet and I can't help you with beats audio except I think a couple of Mijjah's roms might have it built in. I don't think you can flash it on top of a Rom but I could be wrong. Good luck
Edit: Wicked Sensations was just updated and has a few elements from jelly bean in it. I plan on trying out over the weekend
I'll second Agats rom as a rock solid product... I also really like m'ics lately.
Sent from my SPH-D710 using xda premium
What do you suggest... Thank you.
Hello and thank you for your response.
After waiting awhile for a response decided to read and read and read more. Basically doing some more research so I DO NOT BRICK my mobile phone.
This is what I did... I flashed back to EL29 Rooted, installed Clockwork Mod recovery, and installed Team VeNuM Blue Boa v0.2. Everything seems to work fine. I did find and installed 'Beats Audio Mod' an hour ago. Oh yeah, I did do a Backup right after installing CWM.
Now, is it SAFE to flash another ICS ROM, like Wicked Sensations or Agat63's ROM, after flashing Calkulin's Format All Zip? QBKING77 stated that he recommends going back to Ginger Bread and installing CWM before flashing another ICS. He does not recommend going from ICS to ICS. What do you think about that? Also, can you send me the links that has the instructions to install the ROMS you like? Thank you.
You are doing things right by reading up and waiting until you are confident you know what to do. That's why I am more than willing to help. This stuff has all been covered but there are still plenty of new people who are tired of waiting for ICS rooting this phone recently. The Odin method QBking describes IS the safest way and I did it that way quite a few times when the leaks became available. It involves more steps and you need your pc. Since you already know how to use Odin maybe you would feel safer doing it that way. However, many of us have used the format all zip to switch ICS roms and its been done probably thousands of times with no problems. Never heard of a brick yet using it. Also keep in mind most of the custom roms such as Boa already have a custom recovery built in so you won't have to keep using Auto Root to add CWM. Good job