Related
Hello,
I was trying to flash a new Rom onto my phone (Superfly) and installed the .zip file from clockwork, however, when I try to boot the phone, it sticks at the Mytouch slide screen.
I cant load into the card nor the phone.
Is there any way to reverse this?
Thanks in advance!
Hopefully you made a backup. You should still be able to boot into recovery and restore your backup or even flash a new rom.
sandpaperback said:
Hopefully you made a backup. You should still be able to boot into recovery and restore your backup or even flash a new rom.
Click to expand...
Click to collapse
The problem the OP and myself are having is that we cant load Clockwork recovery, and I think its cause when we flashed the new rom, it did away with USB debugging mode, and now we cant get back into the OS to select it again. I too am stuck in this loop, and I might just have to bite the bullet and bring it in to tmo and tell em it just stopped working for no reason...
dion20 said:
The problem the OP and myself are having is that we cant load Clockwork recovery, and I think its cause when we flashed the new rom, it did away with USB debugging mode, and now we cant get back into the OS to select it again. I too am stuck in this loop, and I might just have to bite the bullet and bring it in to tmo and tell em it just stopped working for no reason...
Click to expand...
Click to collapse
The USB debugging option means nothing while booted in to recovery. If you haven't flashed the engineering rom before you will need to redo the loop/ota.zip/update.zip spoof to get back in to clockwork.
I did do a nandroid backup, but the phone magically can not find it now. And It took forever to get to work, but I was finally able to get back into clockwork and tried to install another a different rom (Kanged CM6 ROM) but ended with the same results of sticking on the mytouch slide startup screen. Frustrating, because it probably took about 3 hours to get back into clockwork!
Any other suggestions???
wipe everything on the phone, find the thread that walks you through that
cursexcore said:
I did do a nandroid backup, but the phone magically can not find it now. And It took forever to get to work, but I was finally able to get back into clockwork and tried to install another a different rom (Kanged CM6 ROM) but ended with the same results of sticking on the mytouch slide startup screen. Frustrating, because it probably took about 3 hours to get back into clockwork!
Any other suggestions???
Click to expand...
Click to collapse
As was noted previously, if you haven't flashed the ESPRIMG rom, you're basically looking at re-rooting your phone every time you want to install a different rom. This means going through the whole process again and again and again.
falken98 said:
The USB debugging option means nothing while booted in to recovery. If you haven't flashed the engineering rom before you will need to redo the loop/ota.zip/update.zip spoof to get back in to clockwork.
Click to expand...
Click to collapse
thats weird, cause before I could get into clockwork after 2 tries max, not I tried repeatedly for 10 mins and it didnt work, so I should just keep tryin to get into clock work then?
Yes, keep trying. And when you do, please flash the engineering rom and keep the proper update.zip on your card! It will save you a lot of trouble in the long run.
sandpaperback said:
Yes, keep trying. And when you do, please flash the engineering rom and keep the proper update.zip on your card! It will save you a lot of trouble in the long run.
Click to expand...
Click to collapse
will do, theres alot of assumptions around here tho, and newbs to android are kinda expected to know things without them being stated in the threads..
Now I know theres something that makes it so I dont have to go thru the pain of rooting to get into clockwork I'm def gna use it..
what method should I use? Ive been doing the following and no luck so far
1 - cd to android sdk tools folder
2 - vol down + power for recovery
3 - highlight recovery
4 - run loop in cmd
5 - plug usb into phone
6 - plug usb into pc, and before it changes to HBOOT from USB i hit power to select recovery
7 - adb devices sees it as an offline device for a few cycles, then it disappears.
after step 7 I've tried running update.zip
unplugging and plugging back in
ctrl+c to stop the script when its offline
unplug when its noticed as an offline device
whats the best way to get into it now?
======
EDIT - finally got it into recovery, i loaded up htc's recover with it plugged it to the pc so it loaded up HBOOT from USB
normally your are not bricked if:
1. you can boot into recovery
2. you can not boot into recovery yet you can boot into bootloader [HOLD (power + volume down) to boot]
Don't worry I got a black/blank screen of death the other day for flashing the wrong boot.img fortunately I was able to boot into bootloader and start from scratch using the ESPRIMG.zip
dion20 said:
will do, theres alot of assumptions around here tho, and newbs to android are kinda expected to know things without them being stated in the threads..
Click to expand...
Click to collapse
I agree to an extent, but if you take the time to read through things thoroughly (as in every post in the How To Root or Engineering Build or even Rom Bible thread), you'll be okay. This is my first Android device as well. I put off rooting for a solid couple of weeks while I read through everything I could. I was completely paranoid about bricking my phone. Eventually, I went for it. Even then I had a couple hiccups along the way (including have to re-root two more times), but all the information is here.
So an update:
I went to a Tmobile retail store to see if I could do a direct swap and am having a new phone sent out to me. I will definately take all the replies into consideration when starting the root process on my new one! My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
cursexcore said:
[blah blah blah....] My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
Click to expand...
Click to collapse
My question: did u search here?
http://forum.xda-developers.com/forumdisplay.php?f=660
And found items about the champion build and this little file named ESPRIMG.zip?
U can also check out the ROM BIBLE stickie post.
u can try this:
http://forum.xda-developers.com/showthread.php?t=713507
or you can try this:
http://forum.xda-developers.com/showthread.php?t=713507
now if you really searched you would of found your own question:
http://forum.xda-developers.com/showthread.php?t=744709&highlight=unroot
cursexcore said:
So an update:
I went to a Tmobile retail store to see if I could do a direct swap and am having a new phone sent out to me. I will definately take all the replies into consideration when starting the root process on my new one! My final question is, since I am afraid Tmobile will not find my phone valid to be replaced under warranty due to it being rooted, is there any way to unroot and go back to stock? I have googled it, but cannot find anything specific for the slide...
Thanks!
Click to expand...
Click to collapse
I had the same problem you did, and fixed my phone, so its possible. refer to my post on the first page and then refer to this post and use the mirror that Wes himself posted.
http://forum.xda-developers.com/showpost.php?p=7001053&postcount=7
I'm a bit of a NOOB, so bear with my terminology. My phone was rooted and Nand unlocked (S=off), running Fresh 3.4. It will not accept calls so I have to take it to Sprint. I ran the latest RUU to get it unrooted, but I could not use Titanium Backup to restore my apps. I ran Universal AutoRoot.zip http://forum.xda-developers.com/showthread.php?t=838448 and went through what seemed to be the complete process. At the end I was left with the bootloader menu to boot into the recovery but my EVO will not go into recovery. When I try I get I get Recovery the screen shows a phone with a red triangle. I have tried everything I know (I'm a bit of a NOOB), and I cannot get to recovery or Nandroid. I did a Nandroid Backup but can't get to it. My phone no longer communicates with my computer. I have just moved and need my phone to set up appointments. Please help, I'm desperate.
posted in the wrong section. however
does your bootloader show S-OFF now?
all you may need to do is flash a custom recovery to it.
If you unrooted your phone you'll no longer have a recovery, unless I'm misunderstanding you...
tonwarr.the.incredible said:
If you unrooted your phone you'll no longer have a recovery, unless I'm misunderstanding you...
Click to expand...
Click to collapse
from my understanding, he unrooted & then tried to root again. but i may be wrong lol
If you can get into bootloader, you can fix your phone.
get to the bootloader with the usb plugged in so it says fastboot usb in RED at the top. On your pc download the android sdk, goto the tools folder, copy over a custom recovery.img (ra or cm) to the tools folder, type cmd in the address bar, in the command prompt type:
Code:
fastboot flash recovery recovery-RA-evo-v1.8.0.img
and press enter (you can replace recovery-RA-evo-v1.8.0.img with the img of your choice). select bootloader again from the menu, select recovery, enjoy!
jminor4326 said:
I'm a bit of a NOOB, so bear with my terminology. My phone was rooted and Nand unlocked (S=off), running Fresh 3.4. It will not accept calls so I have to take it to Sprint. I ran the latest RUU to get it unrooted, but I could not use Titanium Backup to restore my apps. I ran Universal AutoRoot.zip http://forum.xda-developers.com/showthread.php?t=838448 and went through what seemed to be the complete process. At the end I was left with the bootloader menu to boot into the recovery but my EVO will not go into recovery. When I try I get I get Recovery the screen shows a phone with a red triangle. I have tried everything I know (I'm a bit of a NOOB), and I cannot get to recovery or Nandroid. I did a Nandroid Backup but can't get to it. My phone no longer communicates with my computer. I have just moved and need my phone to set up appointments. Please help, I'm desperate.
Click to expand...
Click to collapse
DUDE. think man. in order to get into recovery, YOU HAVE TO FLASH A RECOVERY IMAGE. DUH!
Hope you don't ever get a job working with people... How about a helpful answer instead of belittleing him? He already admits to being a novice. He came here for help, not to have someone dish him a steam pile of #$% instead.
oshizzle1991 said:
DUDE. think man. in order to get into recovery, YOU HAVE TO FLASH A RECOVERY IMAGE. DUH!
Click to expand...
Click to collapse
Definitely another situation where saying nothing would've been much more productive!
Sengfeng said:
Hope you don't ever get a job working with people... How about a helpful answer instead of belittleing him? He already admits to being a novice. He came here for help, not to have someone dish him a steam pile of #$% instead.
Click to expand...
Click to collapse
he should expect to get these types of responses if he posts in wrong sections and doesnt search for his answer first. its called tough love. if you have a problem with it, why dont you post a productive answer? i posted a productive answer, just in a way that belittled him to get my point across.
oshizzle1991 said:
he should expect to get these types of responses if he posts in wrong sections and doesnt search for his answer first. its called tough love. if you have a problem with it, why dont you post a productive answer? i posted a productive answer, just in a way that belittled him to get my point across.
Click to expand...
Click to collapse
how bout saiying . "posted in the wrong section " then point the guy in the right direction.
no need to beat anyone up.. Grow up
tim
hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
now i am stuck on below attachment please help thnkzz so much for all reply till now
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
GSM or LTE Gnex? What ROM were you running?
Golden rule: Do a backup before doing anything to your phone!
Now all you can do is to download EXACTLY same ROM as you were using by now, wipe cache/dalvik-cache, flash this ROM once again and hope that i'll boot. If it won't you'll have to wipe /data is well.
Sleuth255 said:
GSM or LTE Gnex? What ROM were you running?
Click to expand...
Click to collapse
HI
its gsm i tried to flashed the same rom but still the same only i can access is to recovery
cordell507 said:
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
tnkz bro but i am new to android please help how to do it with Odin
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
nonione said:
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
Click to expand...
Click to collapse
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
salym said:
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
Click to expand...
Click to collapse
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Change your spark plugs.
Sent from my Nexus in Texas.
spaceman860 said:
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Click to expand...
Click to collapse
Hi bro i tired with Odin but stops on userdata any help thnkzzzz
salym said:
hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
Click to expand...
Click to collapse
i am stuck on this now please help
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
Still have a bootloader? Are you serious? You need to learn how to use an android device as well.
To the OP: Do a factory reset in Clockwork and go to mounts
and format /system. Flash the ROM zip. Profit.
Absolutely serious. Have you been reading this thread? The OP needs to start at ground zero and stop just trying every tool he/she sees. My purpose was to get this person to do some research and I was establishing a knowledge baseline. One plan I was considering was to help the OP install the GNex toolkit then locate stock images and obtain a working build. Your cryptic one liner bit should prove vastly more useful to this guy though. I'll let you have at it and go back to my dev work. lol at least this post was a good way to make sure gapps/root capabilities are properly cooked into my latest test build ....
Sent from my Full AOSP on Toro using xda premium
Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
U r right i am not good in android but i tried to be and this happens, meanwhile nothing shows after i start the device it shows the !!!! mark with device the PC logo,this happens due to ODin actually the SUMSUNG ADB interface shows ! mark because i cant debug from device even no bootloader works any more thnkz for replying
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
bk201doesntexist said:
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
Click to expand...
Click to collapse
i tried more than one day on this issue its only starts with !!! mark on it nothing else, i have attached the pic i cant access any bootloader or any cwm or any thing all i did with Odin and stuck to attached pic even i start the device its shows the same pic.
http://www.youtube.com/watch?v=WdM2M8Nz6QQ this I used on Odin
thnkzz
As I suspected earlier, it appears that the OP may have trashed his bootloader partition when he tried using Odin to flash the 4.0.2 factory image (which includes a bootloader). At one point he had CWM but not any more since he can't boot to the recovery partition.
Another possibility is that the Odin tool itself places the device in this mode and it can't be manually reverted by starting up in fastboot mode. Looking at the picture, it literally appears that the phone is saying that a flashing operation is half finished but the phone has lost the PC connection... This would be a lot like what I've experienced with iPhones.
In either case, I can deduce that Odin is the tool to use to clear this softbrick.
Hopefully, it'll be flame-off now Sdobron. Perhaps you might want to help out here since I'm not up to speed on the Odin tool myself and would like to learn more about it.
@salym: I know this may be redundant but I need to establish your problem baseline empirically. Once again, can you verify that when you hold vol down/vol up then press power that you get the image you posted?
Use Fastboot!
Dude, it looks like your problem is with crappy boot sector.
While turning on your phone, hold both volume up and volume down buttons, and long press power button untill you feel single vibrate feedback.
Then connect your phone to the computer via USB, and if it doesn't detect drivers, google "samsung android usb driver". Additionally you can install PDANet application (X64 or x86 depending on you system).
THen download Fastboot - there are plenty of instructions how to flash it, and flash stock images (that come with radio, boot sector, rom itself, etc) - there are also plenty of discussions about how to do it. PM if you have any other questions!
I saw a couple people had the same issue that im now having but none of there solutions solved my problem
i wiped my GS3 for ATT tried to go back to a stock with root rom and when it rebooted it now just hangs at the samsung logo at boot tried re-flashing via odin with no luck also tried flashing a CWM.tar since i cant get into stock or CWM recovery to flash from there is there something im missing i know its late and maybe my brain isnt working like it should
Solved the problem myself.....and rather then just say i figured it out ill share how i did this since i watched countless videos and read endless amounts of threads and since none of them helped mem
First also try t put your phone into stock recovery mode and wipe your phone then flash this should take care of things if it doesnt try what i tried below
and i hope this can help someone else out there who has the same problem that i had all you have to do is the following i did this with obviously an AT&T model should work with others but as always try at your own risk.....
First make sure your battery has a charge even if its stuck on the boot screen its still charging....
then download KIES from samsung update it and make sure you have the latest version.
Next plug in your phone if your stuck at the samsung screen your computer will recognize your phone still at least it did with mine.
Once your done with the above open up KIES goto the top and then TOOLS and Firmware upgrade click on that enter your phone model (ATT SGH-I747) i dont get this part but next it will ask you for your SN and for some reason it doesnt recognize the SN use your IMEI
Now it should ask you a couple questions tell you its wiping your device and you will lose everything etc.....but then it will download the latest FW and begin to install everything and in about 20-25 mins everything will be back to stock
Nvm.. misread.
I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.
dbdynsty25 said:
I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.
Click to expand...
Click to collapse
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??
yearziro said:
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??
Click to expand...
Click to collapse
Yes, all drivers are installed because that's how I ODIN flashed it in the first place! Just stuck on the damn Samsung screen and I can't get Kies to connect to the phone. Not in Download Mode or when it's just stuck on that screen.
you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....
whit3gh0szt said:
you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....
Click to expand...
Click to collapse
Worked, thanks! I appreciate it.
it doesnt work on mine
dbdynsty25 said:
Worked, thanks! I appreciate it.
Click to expand...
Click to collapse
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"
me neither
mkstf said:
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"
Click to expand...
Click to collapse
Yeah I can't get into recovery either, and its getting really annoying.
indieslap said:
Yeah I can't get into recovery either, and its getting really annoying.
Click to expand...
Click to collapse
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons
xBeerdroiDx said:
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons
Click to expand...
Click to collapse
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.
cabato said:
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.
Click to expand...
Click to collapse
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you
xBeerdroiDx said:
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you
Click to expand...
Click to collapse
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.
cabato said:
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.
Click to expand...
Click to collapse
Sounds like you need to clear your cache partition and clear your dalvik cache. There are several guides on this site to help you. Choose the one that is most appropriate to what you are trying to do and follow it EXACTLY. There is one to start. Follow it from the beginning.
http://forum.xda-developers.com/showthread.php?t=2042775
When nothing else works start over from search. You cab use download mode? First make sure you got right drivers as that can mess up Odin. Use one in my Sig if you want. Then flag stock recovery with root someone nice will part a link to it I'm on my phone can't do it. Well fix your phone
Sent from my SGH-I747 using xda premium
allow rldcess
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"
Bump
Sorry, I really need help for this. I can't install the MTP drivers even through using some of the tips on this site. That seems to be the problem with me accessing the phones storage from my computer. Does anyone have an ideas for what else I could do? Should I just take it to the store and hope they can fix it?
cabato said:
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"
Click to expand...
Click to collapse
go to your device manager on your computer, locate samsung drivers for your device, uninstall them
restart your computer
then plug in the phone and lets it reinstall by itself
Use my drivers in my signature
They are last good damaging drivers. Don't update them but install them and plug phone in with no internet. after install plug internet in. There good stable drivers
Sent from my SAMSUNG-SGH-I747 using xda premium
Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!
Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app
I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!
I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob
I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?
If they have parts on hand if not either a swap out or a sendoff
Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.
Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.
no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)
Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.
Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!
Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone
After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything
sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?