Ok so iv been designing stuff for a good few years now and decided i want to make something for the community i cant go into great detail as i have had loads of ideas ripped off. I just want to no what you would prefer, a custom battery door or a custom case? I no theres loads of different cases out there but these would be totally different. As soon as poll is complete and patent is finalised in a week i will post examples
how about an custom sticker that says "XDA and Proud"? or something along the line.. so we can put it on our SGS2 ? XD
I would like a case similar to the Taurus case. I cant find much similar to it
I'd prefer a custom battery door.
I already have a red sweet armor as a case. I think a badass matching battery door would be nice.
Why not doing both?
Make the case with the battery door, so we do not need to remove the case in order to access the battery.
That would be nice.
Case- appropriate for a 2000 battery and 1650.
sent from my Nokia 3210 running android.
Related
Hey all,
I was given an Excalibur with a buggered screen from a mate, so I replaced that and it's working nicely (especially with the 3VO ROM, which is bloody fantastic!). The battery is knackered, so I will be replacing it with the extended 2200mAh version that comes with the larger cover. So, I'd also like a case for this phone to protect it whilst I'm out and about (It will go with me on my motorcycle so I really need to protect it!).
So, do any of you wonderful folk know of a case that will accommodate the Excalibur with it's extended battery, or should I settle for one of those 'sock' style ones with a drawstring? I'd really like something that I can keep the phone in all the time, even whilst I use it.
Cheers!
Neil.
I work directly with China's largest manufacturer of Extended batteries. They finished the AT&T Samsung Vibrant for T-Mobile and I've sold a bunch already with 100% feedback on Ebay. Userid is kevinjmoore. Unfortunately, they don't want to make a mold for the Captivate because they don't think there is enough demand in the USA to warrant it. To prove them wrong, I am trying to generate interest so that I can pay for the door mold charge and have them produce a bunch. The battery is the same as the Vibrant so that part is done. It is a 2800maH, which is nearly double the capacity and does last more than twice as long as stock--I know, I have the phone. Please email me at kevinjmoore at gmail dot com to get more details and help us get this rolling. I've reviewed all the forums out there and battery life is definitely one of the top issues. The rubberized door feel is awesome and it doesn't add a bunch of thickness to the phone like you think it might. Total production time is 20-25 days. My price will be at most $40 incl shipping. I may bring it down if demand is high enough. I will need a minimum of 50% fully refundable deposit. If I don't get enough demand in 30 days, I'll refund completely (less $0.30 Paypal fee). Please forward this, tweet this, facebook this and let's get this thing done My communication and customer service is second to none. We are building a US based website that will be up in 2 weeks detailing the over 35 other phones/extended batteries and hundreds of accessories (including IPAD and IPHONE) that we carry.
I found this pic on ebay:
http://cgi.ebay.com/Samsung-Vibrant...448289815?pt=US_Batteries&hash=item1e5f52f017
There is no way I would do that to my captivate. Just make a battery that fits in the factory space that has a 25% more power and i would be happy.
alphadog00 said:
I found this pic on ebay:
http://cgi.ebay.com/Samsung-Vibrant...448289815?pt=US_Batteries&hash=item1e5f52f017
There is no way I would do that to my captivate. Just make a battery that fits in the factory space that has a 25% more power and i would be happy.
Click to expand...
Click to collapse
+1
10chars
I would do it in a second for double the life are you kidding me! As long as the back cover had some sort of style to it.
unfortunately I'm gonna wait for the seidio 3000mah extended battery.
Sent from my SAMSUNG-SGH-I897 using XDA App
Ewwwww...
That looks fugly as hell... I would get 2 extra OEMs w/ desktop charger instead...
Doesn't look horrid for the Vibrant. But the Captivate? Yea.. look like a damn camel hump or a hemorrhoid on the back of my phone. No thanks.
I had one on my Dream and other than being somewhat a nuisance for carrying cases/belt clips it was well worth it. In fact it worked so well I sold it to my buddy who had a dream when I switched to the captivate. He loves the damn thing cause he can use his phone all day long now without having to charge it.
I am a someone who prefers function over cosmetics. If it works better but is uglier wtf cares? When was the last time you looked at the back of your phone and was like wow- that sure is purdy You don't interact with the back of your phone. Also with the back being rubberized I would find it easier to rest on my shoulder during long tech calls with clients as I dont use bluetooth headsets. Just this morning I almost dropped my cap as it slipped from my hand getting out of the car- luckily I caught it, but still with the rubber this is less likely to happen. Again.. function over form all day all long.
I carry mine in my pocket. I like the captivate because it's thin. If I need to I'll carry spare battery before I double the thickness of the phone...I'm just sayin'
Mike
if i had the battery i could make the dies. are you looking to make a plastic cover or stamp an aluminum one?
anyway it would be nice to have on hand for trips or events where i dont know how long i will go without a charger. i dont think i would walk around with that in my pocket but it would be nice to have one available for occasional use and there are plenty of people that have come around here complaining about horrid battery life. i find the battery life quite good and in an every day environment you can always plan around it but obviously some people want more or just like to complain.
If I traveled, I would be all over this. Unfortunately, the $9 2-pack of batteries with wall charger on eBay just doesn't makes this as economical when I can just reach over and pop in a fresh battery and have the old one start charging.
It adds a "WHOPPING" 6 mm to the phone (not even 1/4"). I gave it to my friend to hold and he said he actually liked the feel better with the door that way. It felt more stable and fit perfectly to how you cradle your phone. The door is better than stock and fits easily in your pocket. It is NOT bulky at all. To not have to charge your phone every 7 or 8 hours if you are a moderate to heavy user is so worth it. I can't imagine not having it or carrying around 2 or 3 batteries all the time.
It is 6mm extra on an 11 mm phone (about 50% thicker for double capacity). It's a no-brainer.
i think you'd sell them but i think this might not be the right forum for it, the less than enthused response doesn't mean that people who travel aren't looking for something like this, it just means that we dont have that many people on the forum looking for this. are you getting feedback on your ebay store asking for it?
Email me at kevinjmoore at gmail to discuss.
Correct me if I am wrong but...
Isn't our metal back plate aid in reception? I thought the antenna was in direct contact with the back plate. Seems to me that a big piece of plastic holding in a big battery would give us signal loss...
Shovelhead84 said:
Correct me if I am wrong but...
Isn't our metal back plate aid in reception? I thought the antenna was in direct contact with the back plate. Seems to me that a big piece of plastic holding in a big battery would give us signal loss...
Click to expand...
Click to collapse
no it appears to be grounded not an antenna but i could be wrong i dont know much about cell antenna design. there are two contacts and one goes to the metal chassis indirectly through a shiny plating on the back of the plastic housing. the other goes to the board but i didn't trace it to tell if it went to the points that contact the chassis and plastic cover, electronics today can be difficult trace.
i know some antennas form a loop and it can very well be an antenna but i find that my phone works fin with the battery door removed. also there is no reason a new batery door cant be stamped from aluminum. or lined with aluminum tape.
I assume that you can't have a battery like this and use a case like the Body Glove Mirage? Are there alternative cases that will work with a battery like this?
A better solution would be a silicone case with a pocket for a spare battery. Carry it when you need to and switch when you need to.
a picture (if you have a functional unit) would be a lot helpful...
waghoba said:
a picture (if you have a functional unit) would be a lot helpful...
Click to expand...
Click to collapse
I agree. Any/ all pictures of all angles would be highly appreciated. Only then can i make my decision. I too am interested in this.
alphadog00 said:
A better solution would be a silicone case with a pocket for a spare battery. Carry it when you need to and switch when you need to.
Click to expand...
Click to collapse
Now this wouldn't be a bad idea either....
Espaa Valorum said:
I assume that you can't have a battery like this and use a case like the Body Glove Mirage? Are there alternative cases that will work with a battery like this?
Click to expand...
Click to collapse
From my experience with the BG Mirage + the specs provided by the OP, its a definite No. Not with 6mm (50% thicker) but i would applaud anyone who would try it. Who knows, it might actually work out. Now if only Otterbox cases work with ANY extended batteries..........then I am ALL OVER IT.
Sorry if this has already been asked, but the search function is down right now.
I'd LOVE to have a wood or bamboo case for my Vibrant like the way these iphone cases are made: grovemade.com
Anyone have a lead or know someone that will make custom cases out of wood or bamboo?
wow i went to that site and all i can say is wow. that is amazing. i have never seen anything like that for the vibrant but if you find anything let me know! i'm thinkiing of trying it out myself, i'm may be able to make something liek that, minus the laser engraving, it would be just wood, simple but could be cool.
woooooooow. That plain wood amber case is soooo tight. i would definately drop the cash to have one of those that thing looks amazing. My guess would be it would be way more difficult to do a case for the vibrant tho. Iphone 4 is pretty simple and symmetrical. Vibrant is curvy, and has that hump on the bottom of it, i like the way it looks but making a case out of bamboo would be difficult.
It would be GREAT to see some Android logos and guys on that. Wonder how well it holds up to water (washing it) and dropping (breakage)....
If it's Oak im sure it can take a fall its really tough not like that pine crap. As long as it has a good finish on it like Polycrylic or some type of clear coat, it'll be water-proof. I'm definately interested in something like this, I would make one but sadly I don't have access to any woodshop equipment anymore.
ok guys, i posted a week ago that i was thinking about trying to make one of these, and i'm pretty serious about it now. I'm no expert, but i've helped build a few houses and random jobs here and there so i've worked with wood alot. Never anything this small and precise though. I've been gathering up tools and bits for the wood work and i'm about to get started. I can't find any bamboo but i'm probably gonna use oak...we'll see how it goes, may take a week, may take 23 years, who knows. I'll definately post pics when i'm done though. the trickiest part is definately gonna be the hump on the back at the bottom.
I sure hope they start making these. those things are sexy
Never mind.
iPhone gets all the cool accessories -_-
^^^^That's because the iPhone users are Fashionistas (i.e.: Fruit-Booters)
EckoInLasVegas said:
^^^^That's because the iPhone users are Fashionistas (i.e.: Fruit-Booters)
Click to expand...
Click to collapse
well call me a fashionista becuz i want some cases that actually look decent on my vibrant.. no just some generic stuff.
If it's just the look you want why not try vinyl shelf paper/contact paper? That stuffs pretty durable, cheap and you can get it in oak, bamboo, whatever you want.
Go green guys! Save the environment.
Environment my ass.
Email them at [email protected] and ask them to consider making wooden cases for the Vibrant. More people that contact them, meaning more potential customers, the more reason they would consider making it for us.
Back case?
http://mobile.brando.com/samsung-i9000-galaxy-s-woody-patterned-back-case_p05847c1111d004.html
Better than nothing I guess.
Sane1 said:
If it's just the look you want why not try vinyl shelf paper/contact paper? That stuffs pretty durable, cheap and you can get it in oak, bamboo, whatever you want.
Click to expand...
Click to collapse
you mean wood veneer? like wood skin right? I've used the stuff on little boxes I've made and it looks beautiful but the tricky part is when you glue it to the wood you want to put it on top of you need something HEAVY to be on top of the ENTIRE thing otherwise it has air pockets and curls up with makes it a real ***** to fix.
but I want real wood! So if I'm about to jinx something, I can knock on my phone.
@vballrkc:
Hey man keep us all updated!
You'd be QUITE popular here if you can pull it off!
Sent from my Vibrant using XDA App
If someone started making these, i would definitely go in on buying one. I'm pretty bummed that all the high quality cases and accessories are only for iphone, where's the android love??
^
Apple = 1 design
Android = multiple designs and different manufacturers
It's a good and bad thing for us.
I just got the seidio case and hate it. I would love to see a legit case like the one in the op too.
Hey Guys
Been meaning to ask for a while,
Anyone know if there is such thing as a battery cover that has a (soft-ish) type finish?
im looking for something that feels reminiscent of the back of my old desire.
primarily to give the device more traction when in the hand.
im not that keen on cases because i think they tend to spoil the lines of a device.
ive looked periodically but never found any....i would have thought there would be a market for such a cover
(anyone know what i mean?)
cheers
Hope this helps it looks rubbery!
http://www.ebay.co.uk/itm/Battery-B...UK_Mobiles_Accessories_RL&hash=item27be7f9e85
Just wondering if anyone has made it yet. I would imagine the back door would be pretty easy to cut. And before you say "oh, why don't you make one instead of asking?" its because I dont have one yet but as soon as I get one I will. In any case, I just want to see what it looks like.