Related
I need to downgrade to 2.1 but I've found nothing useful as to how to do it
I factory reset my phone but that didn't help
all it did was mess up my USB connection from my epic to pc
I tried re-installing the update zip file, but it aborts it halfway through
can someone PLEASE help me?
Flashing back to 2.1 has been covered extensively, please use the search button next time!!
1) Installing this will erase all of your saved apps (unless you back them up). Any PURCHASED apps will be saved in the app market and will be available for re-download once you sign into your google account.
2) If you are having issues with 2.2, or don't like something that changed, or want to go back to stock 2.1, or just want to complain about this leak version, then here are directions to flash BACK to 2.1.
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing
This will let you download Odin and the included victory.pit file that you place into the ".pit" section in Odin
http://forum.xda-developers.com/showthread.php?t=794138&highlight=DG27
This allows you to download various versions of roms. Download the DI18 file.
Put your phone in download mode (according to directions in first link), and open Odin. Then connect the phone to the computer, Odin should then recognize it. Place the .pit file and the .tar files into their corresponding areas. On the left the ONLY boxes that should be checked are "Auto reboot" and "F. Reset Time" then press start and let it go, should take about 5 minutes or so.
Then there you go, you have 2.1 again. Depending on what you want to do you can either re-install the update.zip or Odin flash to Dk28, or just keep 2.1
see, the thing is. I CAN'T connect my Epic to my PC
there's something wrong with my Samsung drivers
I uninstalled the drivers, rebooted my pc, re-installed drivers, rebooted Epic, connected Epic to PC, and it STILL couldn't identify my Epic
I wasn't having issues with 2.2 (except that horizontal calibration)
this sucks, I really have no clue what to do :'(
thanks for the reply though
No Prob, if you have clockwork and are running the rfs file system which is the default, which you probably are, unless you've changed it. If you have clockwork mod 2.xxx, you're good to install this and flash.
Here is the link:
http://www.sdx-downloads.com/devs/noobnl/stock.epic.DI18.rom.update.zip
Instructions: Put on the Root of your SD card, and turn off your phone. Hold Camera, Volume Down, and Power and format data and cache. Then install zip from sd, and then click the stock.zip file on the root of your SD.
You're done .
One more thing:
**If you notice that your orientation sensor is off or not working properly,
Fix for orientation/auto-rotate problem in Epic 4G
***MUST BE ROOTED***
1. Download a terminal app from the market - (Android Terminal Emulator)
2. Enter one line at a time.
su
/system/bin/sensorcalibutil_yamaha
3. Follow the onscreen directions, while making sure you device is flat.
pay attention to the bump at bottom on back.
After you're done, reboot.
I can't root clockwork b/c I can't connect my Epic to my PC :/
This might sound crazy but did you try ALL of the different usb ports on your computer? If not then try everyone of them it's a common problem my phone only works on one out of five.
Sent from my SPH-D700 using XDA App
Since you don't specify, I am going to assume your using the stock usb cable that came with the phone. The stock cable is good for almost nothing except for hooking it up to your wall charger (even though some may get it to work). I would suggest getting another micro usb cable and try again. I bought one online from monoprice.com for about $2 along with a cheap car charger, also about $2, and they both work fine.
Oh yeah restart your computer and phone too.
Sent from my SPH-D700 using XDA App
ok, first, thanks to everyone who replied
second, I bought a gigaware male USB-B wire and now my Epic connects to PC
however! I'm still trying to remove Froyo
I've tried rooting clockwork, but when I go to "RUN" to root
I get a message saying my phone isn't connected
If your goal is to remove froyo, then you need to follow whats in the second post by djbacon06... download odin, the DI18 tar file, and the pit file, making sure to follow the instructions
Koadic said:
If your goal is to remove froyo, then you need to follow whats in the second post by djbacon06... download odin, the DI18 tar file, and the pit file, making sure to follow the instructions
Click to expand...
Click to collapse
ok, I'm going to do this, thanks
I'm new and I hope I'm not posting this in the wrong place or re-posting an old question, but I have been searching on this and other sites for days and haven't been able to find anything pertaining to my question, so sorry in advance If I'm not posting this correctly.
I have a rooted epic touch with rogue boot loader installed and UnNamed rom installed. I really liked the way it was running until I had some kind of malfunction happened and now the battery charge light won't shut off and the battery drains within a couple hours of standby time. the phone is only a couple months old and would like to take it to the sprint store as I'm assuming this is an obvious hardware issue. My problem is that my pc doesn't recognize my phone anymore so I can't flash back to stock and get rid of root, voiding my warranty. I have tried uninstalling and reinstalling kies and stand alone drivers multiple times with no avail. I've tried with the battery and sd card removed and have also tried on multiple pc's (2 win7 and and xp machine). every time it says the drivers weren't installed successfully and to replace the device being connected.
My question: Is there a way to revert to stock off of the internal memory of the phone? I know there are zip roms you can flash from the boot loader but I was wondering if there was a way to flash a rom from zip and install the original boot loader as well as get rid of root? Any help I can get would be extremely appreciated and again I apologize if I am wasting anyone's time by asking in the wrong place or re-asking a question.
Ok so I downloaded the Calkin's_Stock_Rooted_EK02_ROM_v1.0 and got it on my sd card via dropbox. Flashed and now have a stock rom on it which I think is a step in the right direction.
The only thing is now I have clockwork boot loader and still rooted. and still not recognizing on pc. anyone know of an unrooted zip with original boot loader?
I couldn't get my PC to recognize either of my 2 E4GT's, each due to a different reason, both issues were resolved by going through each step in sfhub's debugging checklist:
sfhub said:
This post is for the FAQ section:
Why is the install stuck waiting for device to be connected?
Your phone isn't being recognized by your PC as an Android device.
When the drivers are installed and the phone is properly recognized, you should see the following in start->run->devmgmt.msc
Code:
Android Phone
SAMSUNG Android ADB Interface
Modem
SAMSUNG Mobile USB Modem
Until you get the SAMSUNG Android ADB Interface to show up, neither ADB nor this script will work.
Here is a debugging checklist:
1) dial ##UPST# (##8778#) in the dialer and verify AP (or ALL) is checked (if CP is checked, phone won't be recognized as an Android device)
2) restart the ADB server (choose Option G to stop the server, it'll get started automatically by the script)
3) verify USB Debugging is ENABLED
4) verify USB drivers are installed (Win7-64bit see below)
5) try a different usb cable
If you are in Win7-64bit try changing the default install location for the drivers:
If you see an error like this:
Try running the CMD prompt (or e4gtauto-sfx.exe) as Administrator. Right-click on the CMD icon (or e4gtauto-sfx.exe) and select "Run As", then select Administrator.
If that doesn't work, try disabling windows firewall.
Click to expand...
Click to collapse
I went down that list and everything seemed to be in order but still no recognition by pc. I kept uninstalling and reinstalling the drivers and switching usb ports and it finally installed the drivers successfully long enough for odin to recognize it and to flash back to stock. As soon as it was done the machine stopped recognizing it again. Lucky break I guess. So I can now return it to sprint and deal with the hardware issue.
I would still like to find a zip file like the tar that I flashed that installs stock recovery and non rooted ek02 rom and kernel from cwm, if that's even possible.
Thanks Godswrath, for helping me out.
You could use wifi explorer to get files on to sd card and mobile Odin to flash the tar file back to stock....
Sent from my SPH-D710 using xda premium
Lol....I am a noob.
They make a mobile Odin? That would have saved my like 4 hours....
My LG E980 is bricked. I can access download mode and that is it! I am unable to boot into recovery,
and the hard reset screen simply sits there forever. My computer only recognizes my device as an "unknown usb device."
I'm unsure what can be done about this, but I feel like this is better than the infamous QHSUB icon displayed when the device cannot be recovered.
Does anyone have a remedy for this problem?? I have GOT to fix this phone and can't afford to Jtag the device, but I'm losing hope that this is possible, PLEASE help. :crying:
Have you installed the LG drivers for your pc and tried the unbrick method?
Yeah dude there's an unbrick method. If this doesn't work just sell the phone on Ebay. http://forum.xda-developers.com/showthread.php?t=2302660
There is never a time when this device cant be recovered. even the qhusb is a fairly simple fix. ill go ahead and make a sdcard boot image tonight. do you have a 32gb sdcard? (or larger) and an sdcard reader, if you have those two things i can make an unbrick.img that you flash toi the sdcard and put in the non-booting phone and it will get you to download mode/recovery mode. ill have to check out what partitions are where as i dont wish to include my efs along with it all .
twill1987 said:
My LG E980 is bricked. I can access download mode and that is it! I am unable to boot into recovery,
and the hard reset screen simply sits there forever. My computer only recognizes my device as an "unknown usb device."
I'm unsure what can be done about this, but I feel like this is better than the infamous QHSUB icon displayed when the device cannot be recovered.
Does anyone have a remedy for this problem?? I have GOT to fix this phone and can't afford to Jtag the device, but I'm losing hope that this is possible, PLEASE help. :crying:
Click to expand...
Click to collapse
Happened to me.
1. With the phone on download mode and plugged in the computer; uninstall the unknown device on your computer using device manager. The computer should try to get the drivers for your phone.
2. If it doesn't. Repeat step one and install the drivers first.
That worked for me hopefully I'll work for you.
Sent from my LG-E980 using XDA Premium 4 mobile app
Yes
riki126 said:
Have you installed the LG drivers for your pc and tried the unbrick method?
Click to expand...
Click to collapse
Yes I tried that. The drivers won't install. I even used another windows 8 computer my roommate has and switched out
the usb cables, still came back "unknown device"
shabbypenguin said:
There is never a time when this device cant be recovered. even the qhusb is a fairly simple fix. ill go ahead and make a sdcard boot image tonight. do you have a 32gb sdcard? (or larger) and an sdcard reader, if you have those two things i can make an unbrick.img that you flash toi the sdcard and put in the non-booting phone and it will get you to download mode/recovery mode. ill have to check out what partitions are where as i dont wish to include my efs along with it all .
Click to expand...
Click to collapse
I do have a 16gb sd card, but I can pick up at 32 gb sd at my local best buy. I have an Asus laptop running windows 8 and it has an SD card reader. I am a little confused (semi-noob) as to how this will work because my phone will boot up, and the led changes colors on the home button for about 4 seconds and then the light stops flashing. The phone is stuck on the LG boot screen, and there is no way out of it but to pull the battery or to reset with power button. Of course no recovery as previously mentioned. I really just want to get back to stock, but I can't manage to get both the windows 8 computers I've tried to detect the phone in download mode. Ever since I switched to the Candykat rom 4.4 the computer wasn't able to recognize the phone, even when the phone was fully functional inside the rom.
I have tried it on my dads windows 7 laptop as well with no dice. Instaled LG drivers, uninstalled LG Drivers, uninstalled device from the Device Manager. I've done everything I could think of. I previously was in a Philz touch recovery, but every rom I tried to flash wouldn't work. I tried to flash another recovery from inside it and then the device bricked like it is now. What a head ache. If you think this method would work, I am more than willing to try it, just unfamiliar with what I need to do on my end.
Okay
stulzerl said:
Happened to me.
1. With the phone on download mode and plugged in the computer; uninstall the unknown device on your computer using device manager. The computer should try to get the drivers for your phone.
2. If it doesn't. Repeat step one and install the drivers first.
That worked for me hopefully I'll work for you.
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will give your method a shot, but I have done this a lot already. The only thing I can think of is I usually unplug the phone from the computer right after deleting the drivers and uninstalling in device manager. Maybe I should just leave the phone plugged in and see if the computer automatically downloads the drivers, but I don't think it will because I've tried to update the drivers before. It gives me an error code "10" and says the device has malfunction or stopped working This phone has been undetectable via USB since flashing the candykat 4.4 rom. Every computer I've tried (3) and every USB cable (3 again) has displayed it as an "unknown device"
twill1987 said:
I will give your method a shot, but I have done this a lot already. The only thing I can think of is I usually unplug the phone from the computer right after deleting the drivers and uninstalling in device manager. Maybe I should just leave the phone plugged in and see if the computer automatically downloads the drivers, but I don't think it will because I've tried to update the drivers before. It gives me an error code "10" and says the device has malfunction or stopped working This phone has been undetectable via USB since flashing the candykat 4.4 rom. Every computer I've tried (3) and every USB cable (3 again) has displayed it as an "unknown device"
Click to expand...
Click to collapse
I've had similar issues when i had my optimus g. I had to use a pc with xp to flasht he phone, dunno why though. You could give that a shot.
twill1987 said:
I do have a 16gb sd card, but I can pick up at 32 gb sd at my local best buy. I have an Asus laptop running windows 8 and it has an SD card reader. I am a little confused (semi-noob) as to how this will work because my phone will boot up, and the led changes colors on the home button for about 4 seconds and then the light stops flashing. The phone is stuck on the LG boot screen, and there is no way out of it but to pull the battery or to reset with power button. Of course no recovery as previously mentioned. I really just want to get back to stock, but I can't manage to get both the windows 8 computers I've tried to detect the phone in download mode. Ever since I switched to the Candykat rom 4.4 the computer wasn't able to recognize the phone, even when the phone was fully functional inside the rom.
I have tried it on my dads windows 7 laptop as well with no dice. Instaled LG drivers, uninstalled LG Drivers, uninstalled device from the Device Manager. I've done everything I could think of. I previously was in a Philz touch recovery, but every rom I tried to flash wouldn't work. I tried to flash another recovery from inside it and then the device bricked like it is now. What a head ache. If you think this method would work, I am more than willing to try it, just unfamiliar with what I need to do on my end.
Click to expand...
Click to collapse
I dont know lg's download mode, kdz, tot etc all that well. im more of a samsung guy. however qualcomm since the s4 chipset has allowed for sdcards that are properly formatted to boot the os instead of the internal emmc. here is a decent guide, just need to make teh image for this device. this will let your device boot no matter how bad it gets you are welcome to try with 16gb, the rule of thumb i know of is as big as teh emmc is use that same size or larger sdcard, however some people have had sucess withs maller, just not many that i know of. http://forum.xda-developers.com/showthread.php?t=2439367
however afaik the only way to reflash teh bootloader partitions is via kdz/download mode so perhaps the sdcard will let you get into that mode and then you can flash, so long as you keep your sdcard like that it will boot fully, but in order ot get your sdcard back you need to repair teh files on your phone .
Thanks
WeActOnImpulse said:
Yeah dude there's an unbrick method. If this doesn't work just sell the phone on Ebay. http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
I have tried this and unfortunately since the USB drivers aren't detected by the computer there is no way for me to flash back to stock.
Thanks for the information though, I appreciate it.
shabbypenguin said:
I dont know lg's download mode, kdz, tot etc all that well. im more of a samsung guy. however qualcomm since the s4 chipset has allowed for sdcards that are properly formatted to boot the os instead of the internal emmc. here is a decent guide, just need to make teh image for this device. this will let your device boot no matter how bad it gets you are welcome to try with 16gb, the rule of thumb i know of is as big as teh emmc is use that same size or larger sdcard, however some people have had sucess withs maller, just not many that i know of. http://forum.xda-developers.com/showthread.php?t=2439367
however afaik the only way to reflash teh bootloader partitions is via kdz/download mode so perhaps the sdcard will let you get into that mode and then you can flash, so long as you keep your sdcard like that it will boot fully, but in order ot get your sdcard back you need to repair teh files on your phone .
Click to expand...
Click to collapse
Wow, that sounds awesome. I followed most of that. I access download mode on the device by pressing vol up and down simultaneously and plugging in the usb cable. I am more willing to try this, and if it works I will pay you from my paypal. I guess all I need now are those files to run to the sd card. I read the tutorial you posted for the samsung and downloaded the windows disk manager. I am eager to try this method, though it is admittedly very new to me.. If you can post those files, I will follow the instructions you give and pay you a little bit of money for your help!
I am a broke college student so it won't be much, but I really appreciate your response and information on this method with the qualcomm s4.
Here is the unbrick image. follow the guide for your platform (gunna guess windows) and write this to your sdcard after backing it up. from there you need to restore your partitions by flashing them .
https://mega.co.nz/#!YB5xWQ7Y!Qcnx9UmcNn-f6skfiIFN-jd0EeYxdmrQGA1zzP5hfA0
Just wrote it to sd card
shabbypenguin said:
Here is the unbrick image. follow the guide for your platform (gunna guess windows) and write this to your sdcard after backing it up. from there you need to restore your partitions by flashing them .
https://mega.co.nz/#!YB5xWQ7Y!Qcnx9UmcNn-f6skfiIFN-jd0EeYxdmrQGA1zzP5hfA0
Click to expand...
Click to collapse
Okay so I bought the 32 gb sd card. Just wrote the .img file you sent me to the sd card.
I powered on the phone and nothing happened, I got the same LG screen where the led flashes and then stops.
I followed that guide, but am I supposed to go to download mode instead of just powering on the device?
I got a little confused by the samsung jargon lol. I just want to know after I've written the unbrick.zip to the sd card
how do I get my phone to recognize the card is there? And once I am able to do that how do I "restore my partitions by flashing them?"
I do have the factory firmware set to flash through lg flashtool, but the phone can't be detected of course due to the usb issue.
Just want to say thanks for walking me through it this far, I feel like I'm close hopefully but unsure what to do next.
twill1987 said:
Okay so I bought the 32 gb sd card. Just wrote the .img file you sent me to the sd card.
I powered on the phone and nothing happened, I got the same LG screen where the led flashes and then stops.
I followed that guide, but am I supposed to go to download mode instead of just powering on the device?
I got a little confused by the samsung jargon lol. I just want to know after I've written the unbrick.zip to the sd card
how do I get my phone to recognize the card is there? And once I am able to do that how do I "restore my partitions by flashing them?"
I do have the factory firmware set to flash through lg flashtool, but the phone can't be detected of course due to the usb issue.
Just want to say thanks for walking me through it this far, I feel like I'm close hopefully but unsure what to do next.
Click to expand...
Click to collapse
you wrote the image to the sdcard? i wonder if its because you still have the low level bootloaders that it may not be booting from the sdcard, normally this is done to fix qhusb errored devices. as for restoring the partitions all you would need to do is one its booted up push the unbrick image to the phone and use rooted adb shell to write it back onto your phone.
Possible hope??
shabbypenguin said:
you wrote the image to the sdcard? i wonder if its because you still have the low level bootloaders that it may not be booting from the sdcard, normally this is done to fix qhusb errored devices. as for restoring the partitions all you would need to do is one its booted up push the unbrick image to the phone and use rooted adb shell to write it back onto your phone.
Click to expand...
Click to collapse
I meant I used the windows tool to write the debrick.img to the sd card. But no dice, the device isn't recognised.
However! I installed a driver clean up tool and now if I plug in the device it is recognized as Android Original ADB Interface.
The LG Flashtools even says the port is ready! But I get the error code "10" "device cannot start, A request for the USB device descriptor failed."
So now I am stuck on that instead lol. This just sucks.
that sucks about the sdcard, it must be because you arent "truly" bricked. sorry i thought it would help ya :/.
What is the driver repair tool you used? I know this thread is old but I'm having the same problem. I was trying to root my E980 and now my computer wont recognize my device. The phone works perfect, its just when I plug it in to the computer it isnt recognized. How can I fix this?
+1
Just wondering if anyone's come across a solution to this besides a sledge hammer... been having the same "Code 10: Device failed to start" when in Download Mode, though Windows finds a driver fine when the phone is stuck on the LG screen... doesn't help much, though, 'cause it won't receive adb commands. I manually installed the LG USB Composite Device driver, which added a modem and a COM port, both of which Windows recognized to be active, but the LG FlashTool USB Viewer showed no open pipes. I'm a relative noob, so please feel free to point out the obvious, like an alternative to adb that the phone can always receive or a way to brick it the rest of the way so the MicroSD trick will work.
I came across this problem like the OP and just wanna let everyone know that you have to use computer with USB 2.0 port then the driver issue would be fixed.
sorry if i posted this the wrong place but nevertheless here is what i need help with.
i was looking for a stable 4.4.2 rom to flash on my at&t note 2 and i found this http://forum.xda-developers.com/gala...-odex-t2802189
so i followed the instructions and flashed with odin and flashed the new bootloader since i was running lower than mj5
after flashing everything went well the rom was great until i wanted to take some photos from my laptop and send them to the phone.
the laptop recognizes a usb device but no prompt for folders or anything is being given, ive tried multiple usb cables and even multiple pcs to no avail.
so i tried reverting back to my old firmware 4.1.2 and the problem is still there
after digging around the computer in the device manager, the phone is being listed as SAMSUNG_ANDROID and is unknown followed by an error when i click properties which says:
This device is not configured correctly. (Code 1)
i also have kies and the official samsung drivers installed
To find a driver for this device, click Update Driver.
so i tried updating the driver which failed and said an error occured data invalid
i really need some help on this because my phone isnt being picked up by odin or download mode
please help asap
You might consider downloading a wifi or bluetooth file transfer utility. I used one of these to great effectiveness on my old phone.
I realize this isn't the ideal solution you're looking for, but sometimes you have to take what you can get.
warriorpanda said:
sorry if i posted this the wrong place but nevertheless here is what i need help with.
i was looking for a stable 4.4.2 rom to flash on my at&t note 2 and i found this http://forum.xda-developers.com/gala...-odex-t2802189
so i followed the instructions and flashed with odin and flashed the new bootloader since i was running lower than mj5
after flashing everything went well the rom was great until i wanted to take some photos from my laptop and send them to the phone.
the laptop recognizes a usb device but no prompt for folders or anything is being given, ive tried multiple usb cables and even multiple pcs to no avail.
so i tried reverting back to my old firmware 4.1.2 and the problem is still there
after digging around the computer in the device manager, the phone is being listed as SAMSUNG_ANDROID and is unknown followed by an error when i click properties which says:
This device is not configured correctly. (Code 1)
i also have kies and the official samsung drivers installed
To find a driver for this device, click Update Driver.
so i tried updating the driver which failed and said an error occured data invalid
i really need some help on this because my phone isnt being picked up by odin or download mode
please help asap
Click to expand...
Click to collapse
So you want to take photo's from your laptop and put them on your phone right?
Well why don't you get a micro SD card , put it on your computer transfer the photos then put the SD card in your phone.
pstuart82 said:
You might consider downloading a wifi or bluetooth file transfer utility. I used one of these to great effectiveness on my old phone.
I realize this isn't the ideal solution you're looking for, but sometimes you have to take what you can get.
Click to expand...
Click to collapse
using one doesnt make sense because now especially odin wont recoginize the phone so i cant flash or do anything
Hi all,
I got given this Tab3 because the smd power socket connection guts were physically broken inside socket.
Fitted new power socket (I'm an electronics repair engineer by trade) and checked all pcb (printed circuit board) tracks leading from new fitted socket to ensure there were no hidden breaks ...... new socket refit was 100% successful .....with no solder shorts / bridges and no broken tracks leading to mainboard.
I left Tab3 on charge overnight and next day switched Tab3 on only to be greeted with dreaded .PBL and .PIT failed issue.
After extensive (days!) research I gathered together all necessary firmware and tools and decided that its an easy firmware fix if flashed to an original Samsung SM-T210 UK firmware.
(Please note I dont know past history of this Tab3 .... I dont know if it was rooted / upgraded firmware etc ..... I doubt it though as it belonged to a 7 year old)
Big issue ..... Odin flash tool won't show coms port connection on PC via USB (have tried 3 different laptops one with XP, one with Win7 32bit and another with Win7 64 bit. I've installed / uninstalled / reinstalled multiple Samsung usb drivers that were verified to work with my Tab3 SM-T210 model on each PC .... no joy. Even installed / uninstalled / reinstalled Kies from Samsung .... still wont connect when Tab3 is in download mode. Have kept PC device manager open and nothing appears in device manager. Also have tried 6 different makes of Usb A to micro Usb cables. Have disabled all antivirus, UAC, firewall and Win defender etc ... still no go!
When I go into download mode (power + Vol- +Home buttons) a warning screen does appear BUT it only shows right hand side of graphic warning ..... left hand side is totally grey from top to bottom. (LCD screen is not faulty as it displays full screen info on failed .pbl / .pit flash memory checks) When I then select Vol+ this vertical half graphic info and half grey screen disappears just leaving the backlight on .... which I assume means Tab3 is in proper download mode?
I can go to all recovery modes which allows me to factory reset and delete user cache etc .... it seems to go through the proper routines of reset but upon restart .pbl and .pit failed error in red memory check list is still there.
I can also try and flash firmware file from external sd micro card .... Tab 3 recognises firmware OK and shows Install ..../SD, but then after approx 5 minutes it restarts to failed .pbl /.pit error list again.
Apologies for long post, but from reading above issues can anyone please confirm ....
1) Is half graphic normal when going into download mode? .... or does this point to a previous incorrect or unfinished flash issue?
2) I have downloaded proper .pit flash (LT02) file and original firmware flash for my Tab3 ..... can I flash this any other way other than using Odin ....eg is there any bdm flash method (direct hard wired) flash method to motherboard from external programmer ....like they use for car ecu flash recovery?
3) As I dont know exactly whether Tab3 was rooted / flashed with wrong firmware / incomplete flash upgrade, is there a software tool that can attempt to list what firmware is on my Tab3 at present?
4) I can get into ADB recovery within recovery mode but havent a clue how to use this method .... is this a possible recovery method to use, as I can see SMT210 ADB device in PC device manager when going into recovery mode?
many thanks in advance for help, :good:
Tab3SMD
OK all, here's more info .......AND another additional issue!
I got stuck back in again tonight because not knowing anything about Tab3 ADB recovery mode was bugging me, so here's what extra I've done so far
While "poking my nose" into tonnes more Xda forum troubleshooting guides I discovered I might need PitMagic tool to try and sort my .Pit partition error via ADB recovery mode.
I tried to find Pitmagic but discovered this is now part of EFS Professional, so downloaded EFS Pro and found this got me nowhere as I needed to also install Android SDK .... which also requires Java Development kit, so I downloaded the full Android Studio and Java JDK 8u91 and installed all (about 1.2Gb and requires ~ 4.2Gb hard drive space!)
Anyway, I now ran Android Studio and then ran EFS Professional, opened my Tab3 into ADB recovery mode and connected Tab3 and PC via usb .....
All looking good EFS reported
Initialising ADB server ..... Okay.
ADB server is running!
Searching for device..... OK
Connecting to device .....OK
Checking device status .....
THEN BAMMMM ....popup from EFS
Connected device is currently UNKNOWN
Please ensure ADB server has been authorised by the connected device by confirming your PC's RSA fingerprint, then press OK to continue
like, wtf! .... one step forward and 6 back!
Can anyone please tell me what this means or better still how to proceed from here?
Anyone?
Anyone??? .....Tab3 is still soft-bricked
I did figure out how to use ADB flash recovery mode using PC.
Unfortunately this also did not allow me to flash any firmware (original or custom) due to admin permissions
(I think this is due to USB debugging not activated within Developer options).
I'm sorta banging my head off the wall with this one .... a bit like what came first? egg or chicken?, because since Odin isn't being recognised by the PC, I cannot flash rom and even though the PC fully communicates with Tab 3 in ADB mode, it won't allow me permission to sideload any flash files because I reckon I need root based permissions, and since the darn thing isn't booting fully, I cannot manually change anything!
I then started thinking about trying to sneak around this permissions issue by flashing CWM or TWRP, but again flash fails due to no permission.
All in all, for me this has been a great learning experience tackling the multiple Android recovery modes, and since I feel so close to cracking this non boot issue, I hate to give up and bin it.
Perhaps someone with much more experience can please help me here?
Is there any way of forcing superuser status on this Tab 3 SM-T210, so as to allow me to flash stock rom via ADB recovery mode?
many thanks in advance for your help,
Tab3SMD