My bro in laws Droid incredible 2 has a messed up charger port. It's running 2.3.4, is there any way possible to get it rooted and and to flash a Rom, without using the usb port?
Sent from my ADR6350 using XDA
brd912 said:
My bro in laws Droid incredible 2 has a messed up charger port. It's running 2.3.4, is there any way possible to get it rooted and and to flash a Rom, without using the usb port?
Sent from my ADR6350 using XDA
Click to expand...
Click to collapse
Have him return it for a good one then root the new one
Sent from my Incredible 2 using xda premium
knipp21 said:
Have him return it for a good one then root the new one
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
They say the warranty is up. Even HTC says they can't replace it. Is it impossible to do without the USB port?
Sent from my X500 using xda premium
you can not root without functioning USB port.
You can find a spare USB port on the net. They aren't that hard to replace. If you can't find a USB port try to find a posts incredible 2.
Sent from my VivoW using xda premium
zax10 said:
you can not root without functioning USB port.
You can find a spare USB port on the net. They aren't that hard to replace. If you can't find a USB port try to find a posts incredible 2.
Sent from my VivoW using xda premium
Click to expand...
Click to collapse
Ahh that sucks. Guess ill buy a port. He's dying for some ics
Sent from my ADR6350 using XDA
Anyone know where I can buy a usb port? And maybe a detailed guide?
Sent from my ADR6350 using XDA
brd912 said:
Anyone know where I can buy a usb port? And maybe a detailed guide?
Sent from my ADR6350 using XDA
Click to expand...
Click to collapse
I think its called repair universe. Just Google it.
Sent from my GT-P7310 using XDA Premium HD app
knipp21 said:
I think its called repair universe. Just Google it.
Sent from my GT-P7310 using XDA Premium HD app
Click to expand...
Click to collapse
I ordered a broken inc 2 off of Ebay a while back. I had to replace the headphone jack. I found a tear down video on YouTube. Just takes about 5 mins of searching.
Sent from my VivoW using xda premium
zax10 said:
I ordered a broken inc 2 off of Ebay a while back. I had to replace the headphone jack. I found a tear down video on YouTube. Just takes about 5 mins of searching.
Sent from my VivoW using xda premium
Click to expand...
Click to collapse
I just popped it open. It was really easy to tear down, now I just need the piece. The connector is fine, but the little mother board the usb port sits on is broke
Sent from my ADR6350 using XDA
Related
Now bow do I install it? I know how to take it apart.
Sent from my Desire HD using XDA Premium App
Assuming you bought a LCD screen, check out http://www.ifixit.com/Guide/Repair/Installing-HTC-Evo-4G-LCD-Panel/3083/1
If you intend to say that you bought a screen protector, the product you bought should have come with some instructions. Or just use google.
No I bought the digitizer screen
Sent from my Desire HD using XDA Premium App
Let's hope you purchased the correct ribbon size. I used this video: http://www.youtube.com/watch?v=A0ys12y3Xvw
Well I mean, should most EVOs be the same.
Sent from my Desire HD using XDA Premium App
evouser22 said:
Well I mean, should most EVOs be the same.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
No 2v6a is are from most of the 002 models, I have a full LCD and digitizer 002 2v6a with digitizer attached, good luck with just the digitizer, it's not as easy as it looks
well just like the screen cracked I can still you my phone, I'm using it right now
Sent from my PC36100 using XDA App
how would I know if I bought the right one?
Sent from my PC36100 using XDA App
thats the video i used
jdefran said:
Let's hope you purchased the correct ribbon size. I used this video: http://www.youtube.com/watch?v=A0ys12y3Xvw
Click to expand...
Click to collapse
i just changed my digitizere two days ago. had some bumps in the road. the glue used on the screen is pretty strong use a hair dryer to loosen it. i the video he makes it look easy. everything else is easy just the screen adhesive is tricky. MAKE SURE YOU HAVE ADHESIVE FOR THE DIGITIZER. if anything give me a shout
what is adhesive!!?
Sent from my PC36100 using XDA App
evouser22 said:
what is adhesive!!?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Wow, you've got a long road ahead of you here buddy...
evouser22 said:
what is adhesive!!?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Glue, tape, etc...basically anything that's used to stick one thing to another.
evouser22 said:
what is adhesive!!?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
You are in way over your head.
and what so o need to glue
Sent from my PC36100 using XDA App
No offense man, but if you have the option to take it to sprint and get it done. They charge 50 for a screen replacement, whether you under TEP or not.
Yikes!!!!!
.........at 8 am today someone poisons the coffee....do not drink the coffee. More instructions will follow.
Cordially,
Future Dwight
ill take the screen I bought to sprint and hopefully it's free of charge
Sent from my PC36100 using XDA App
is it possible for me to do it? if I follow instructions that's all I want to know
Sent from my PC36100 using XDA App
Anything is possible, the question is -do you think you can do it?
We're comin from a pure power source.
yes all I have to do is following instructions
Sent from my PC36100 using XDA App
I think I have bricked my phone. Im pretty tech savvy I have had around 5 phones and have rooted all phones. I flashed a rom I had not seen before in rom manager. It is called minium 1.0.7. It flashed fine and I hit reboot and my phone did nothing. So I did a battery pull for about 3mins and put it back in and it wont boot at all. Is there anyway I can get it to come alive again. Thanks
Sent from my Transformer TF101 using xda premium
Its pretty much not safe to flash stuff from rom manager anymore. Tons of stuff that isn't for our phone shows up in there now, huge problem. But more than likely you are bricked. Only hope you have is holding volume up+down at the same time, and plugging in the usb cord until the "warning" comes up. If that does not work, you have no hope. If download mode actually does come up, i will point you in the right direction to fixing your phone.
slinky1914 said:
I think I have bricked my phone. Im pretty tech savvy I have had around 5 phones and have rooted all phones. I flashed a rom I had not seen before in rom manager. It is called minium 1.0.7. It flashed fine and I hit reboot and my phone did nothing. So I did a battery pull for about 3mins and put it back in and it wont boot at all. Is there anyway I can get it to come alive again. Thanks
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Somebody in the t989 forums already has a Jtag . He'll charge like 90 dollars though
Sent from my SAMSUNG-SGH-T989 using xda premium
I just sent my phone back to Samsung for warranty when I bricked mine. If it wont boot at all 99.9% chance they just send you a refurb.
Sent from my SGH-T989 using XDA
Ok, I have tried that and it wont respond to anything I think its dead. To tmobile I go. Thanks for the help though.
Sent from my Transformer TF101 using xda premium
Bricked a previous gs2 with ROM from other gs2 forums. Sent it to Samsung and replaced under warranty free. Recently picked up this one and wishing I never sold the previous one
Sent from my SGH-T989 using XDA Premium App
never knew rom manager would let us dl roms not for our device. that sucks.
Sent from my SGH-T989 using XDA
junglizste said:
I just sent my phone back to Samsung for warranty when I bricked mine. If it wont boot at all 99.9% chance they just send you a refurb.
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
I have a friend at a tmobile store that should exchange it for me. if I feed them a line lol
Sent from my Transformer TF101 using xda premium
osugsxr said:
Bricked a previous gs2 with ROM from other gs2 forums. Sent it to Samsung and replaced under warranty free. Recently picked up this one and wishing I never sold the previous one
Sent from my SGH-T989 using XDA Premium App
Click to expand...
Click to collapse
who did you talk too? or how did you know where to send it?
Sent from my Transformer TF101 using xda premium
Just read the comments in rom manager, people tell you that some roms are listed in phone section thats not for that phone. I allways read the comments....
Sent from my SAMSUNG-SGH-T989 using xda premium
Sent from my SGH-T989 using xda premium
bmakk2055 said:
Just read the comments in rom manager, people tell you that some roms are listed in phone section thats not for that phone. I allways read the comments....
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
this one had no comments on it. I should have guessed.
Sent from my Transformer TF101 using xda premium
Try putting it in download mode by using an official LG usb cord and plugging it into a wall socket. I know the LG cords have the constant power wire switched so you might be able to do that. I have seen it done before.
Talked to my awesome tmobile friend and she has a new one coming Wed and only cost $5 to replace. Thanks guys for all your advice.
Sent from my Transformer TF101 using xda premium
Probably worth it but your friend is pocketing $5
Sent from my SGH-T989 using XDA
junglizste said:
Probably worth it but your friend is pocketing $5
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
Who cares it's $5 for a replacement.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2 Beta-5
markusf21 said:
Who cares it's $5 for a replacement.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Hell she can pocket $20 looks better $200
Sent from my Transformer TF101 using xda premium
"Its a brick....ouch!!!!" Sing it with me everyone, mother fatha RTFD Son. I am a developer, I can change your bootanimation, can I download rom manager on your phone?
slinky1914 said:
who did you talk too? or how did you know where to send it?
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Samsung website, register the phone and information is on there. Took about 10 days or less for it to get back.
Sent from my SGH-T989 using XDA Premium App
Just got my replacement in and I have noticed it doesn't have a lockscreen. I have rebooted and and turned the screen on and off. The screen turns on and without having to go thru a lockscreen.
The other thing I noticed is if my hold down my power button my phone turns off. It doesn't prompt me to put it airplane mode or anything. It doesn't even ask me if I want to shut down it just does. Can't get a custom rom on thus fast enough.
Sent from my SGH-T989 using xda premium
Anyone made or knows whats the total resistance to get this to download mode? 301 didnt work
Sent from my SGH-T989 using xda premium
helloooo ??? no one has a bloody jig on this forum or what ?
I believe there are videos on YouTube on how to make one. I've seen a couple.
Sent from my SGH-T989 using XDA
anomy13 said:
I believe there are videos on YouTube on how to make one. I've seen a couple.
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
I know how ... i made couple if jigs but not for this phone yet .... just need to know how much is the sum of the resistance
Sent from my SGH-T989 using xda premium
I don't know if this helps at all but lg g2x USB cord works as a jig for this phone.
Sent from my SGH-T989 using XDA
anomy13 said:
I don't know if this helps at all but lg g2x USB cord works as a jig for this phone.
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
Nice one but no ... not what am looking for .... kinda disappointing
Would be nice if u know how much is the resistance for that cord, would solve the problem
Sent from my SGH-T989 using xda premium
nabilbek said:
Nice one but no ... not what am looking for .... kinda disappointing
Would be nice if u know how much is the resistance for that cord, would solve the problem
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
It won't work if your phone is hard bricked. But I thought it was 300
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
It won't work if your phone is hard bricked. But I thought it was 300
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
301 - 315 will force it into download, if that's not working you're borked !
nabilbek said:
I know how ... i made couple if jigs but not for this phone yet .... just need to know how much is the sum of the resistance
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
301 worked for me. I had made one and bought one for my vibrant and they both work for my t989
Sent from my SGH-T989 using xda premium
Damn lol it worked one resistor was dead haha thx
Sent from my SGH-T989 using xda premium
There is a guy on here that makes a nice one. $6 shipped.
So jigs won't work for hard bricked
Ktanicien said:
So jigs won't work for hard bricked
Click to expand...
Click to collapse
That's not what the OP said. I would say it is safe for you to assume that a jig won't work. If you don't read and you don't try for yourself, you will never know.
I got the adapter because it was cheap and wanted to try and plug a usb stick in for movies or whatever. Any idea on how to make the darn thing work?
Sent from my SPH-D710 using xda app-developers app
eko3484 said:
I got the adapter because it was cheap and wanted to try and plug a usb stick in for movies or whatever. Any idea on how to make the darn thing work?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
If it's an extension you're talking about the male end of the micro USB cable then just plug the other end into what ever you're trying to transfer to. Or are you asking about a USB flash drive?
Sent from my SPH-D710 using xda app-developers app
http://www.amazon.com/gp/aw/d/B005FUNYSA/ref=aw_cr_d_wireless?qid=1347587516&sr=8-2
Sent from my SPH-D710 using xda app-developers app
It does not detect anything I plug into it. I'm on Blue Kuban. Could my rom have anything to do with it?
Sent from my SPH-D710 using xda app-developers app
Last I saw USB otg mode was with zedomax's kernel at the very beginning of this phones life.
sent from my BAD A$$ Epic touch
Sorry, it was this one! http://www.amazon.com/gp/aw/d/B005QX7KYU/ref=aw_d_detail?pd=1&qid=1347587516&sr=8-2
Sent from my SPH-D710 using xda app-developers app
What you're waiting for is usb host mode. Dont think you'll have much luck yet. Saw a few posts about it. Here's one..
http://forum.xda-developers.com/showthread.php?p=28685206
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
So we're waiting for a developer to create a work around or fix right? I really just want this for watching movies Haha I'm going somewhere soon for 9 months and won't have really any form of entertainment.
Sent from my SPH-D710 using xda app-developers app
I have to bend my cord up to get my phone to charge. Is this a warranty exchange issue? T mobile take care of this? Just curious while I'm on tonight before I go the t mobile route or Samsung. Searched and saw it's pretty cheap to fix yourself with the right know how
Sent from my SGH-M919 using xda app-developers app
I had the same problem and its not your phone. Its the the cheap charging cable they gave us. Just go out and buy another cable and you'll be fine.
Sent from my GT-I9505G using XDA Premium 4 mobile app
Tyler.Boston1 said:
I had the same problem and its not your phone. Its the the cheap charging cable they gave us. Just go out and buy another cable and you'll be fine.
Sent from my GT-I9505G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah. 2 of my chargers were doing it, but my charger at work works fine which is my oldest one lol
Sent from my SGH-M919 using xda app-developers app