Develop Bugs

Copy from Wifi-Network to MemoryCard very Slow

Hello,
when i transfer a 600 Mb File from my PC to the Memorycard i have a speed from 30 - 40 Kb/s its very slow.....
how is the problem with the connection?
Hardware - O2 Orbit with a 2 Gb Scandisc Card... and Resco Explorer...

O2 Orbit, 2gb Sandisk and vxFTPSrv (Orbit is FTP server, PC uploads) gets me 300kb/s over Wifi. Overclocked to 250MHz it speeds up till 400kb/s.
>kq

Enable missing GPS control panel? Help please!

Just flashed Schaps 4.30 to my Vario II which we love by the way! It has a reg edit facilility on it but does anyone know how I can enable the GPS control panel to go with my external GPS gizmo? I'm sure I read it here somewhere but when I search for GPS it says there are no matches.
I'm sure its a quickie for some helpful peeps out there! Many thanks!

Look in start>settings>system

There's no option or control panel for GPS in settings. Its not listed at all. I know that it's built into Windows but its hidden. I'm looking for the way to enable it to show up, which I think is done in the registry.

The Wiki is your friend:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
To hide or show the GPS connection in the connections panel
The settings are at 'HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings'
The 'Hide' DWORD value should be set to '0' or deleted to show the panel and to '1' to hide the panel
The 'Group' DWORD value should be set to '2' to show the panel and deleted to hide the panel
For example, to show the GPS connection in the connectionss panel
HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings\Hide = 0
HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings\Group = 2
OR here:
http://wiki.xda-developers.com/index.php?pagename=WM5_Tweaks_Other
Add GPS settings icon
If you have a GPS device, you can add a GPS settings icon to your Start > Settings menu using:
HKLM\ControlPanel\GPS Settings\Group = 2 (DWORD decimal)
HKLM\ControlPanel\GPS Settings\redirect <-- delete, or rename, this value
Note that '2' stands for the Connections tab, '1' is System and '0' would be Personal
Note also that this has reportedly disabled one person's USB connectivity. To restore, set "GPS Program Port = None", "GPS Connection Port = None", "Automatic GPS Management = on"

[REQ]A file from xperia m required.

Hey friends can anybody plz upload this file
System/etc/firmware/wlan/prima/
WCNSS_qcom_cfg.ini
Wifi reception on xperia sp is very weak.
I found dat on xperia m it is very gud
So will try this file on xsp
Thanks
Sent from my C5303 using Tapatalk

Here is the file content from xperia m dual c2005 fw 15.2.A.1.12 - android 4.2.2.
Code:
# This file allows user to override the factory
# defaults for the WLAN Driver
# Enable IMPS or not
gEnableImps=1
# Enable/Disable Idle Scan
gEnableIdleScan=0
# Increase sleep duration (seconds) during IMPS
# 0 implies no periodic wake up from IMPS. Periodic wakeup is
# unnecessary if Idle Scan is disabled.
gImpsModSleepTime=0
# Enable BMPS or not
gEnableBmps=1
# Enable suspend or not
# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
gEnableSuspend=3
# Phy Mode (auto, b, g, n, etc)
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
gDot11Mode=0
# Handoff Enable(1) Disable(0)
gEnableHandoff=0
# CSR Roaming Enable(1) Disable(0)
gRoamingTime=0
# Assigned MAC Addresses - This will be used until NV items are in place
# Each byte of MAC address is represented in Hex format as XX
Intf0MacAddress=000AF58989FF
Intf1MacAddress=000AF58989FE
Intf2MacAddress=000AF58989FD
Intf3MacAddress=000AF58989FC
#### UAPSD test Setting- Beginning#####
###Enable UAPSD AC Mask 0x8(BE) 0x4(BK) 0x2(VI) 0x1(VO)
### UapsdMask=0x03 for VI/VO, UapsdMask=0x0f for all AC
# UapsdMask=0x0f for TC 5.1 to 5.7
# UapsdMask=0x03 for TC 5.8 to 5.10
#UapsdMask=0x0f
#UapsdMask=0x03
### UAPSD service interval for VO,VI, BE, BK traffic
#InfraUapsdVoSrvIntv=200
#InfraUapsdVoSuspIntv=2000
#InfraUapsdViSrvIntv=300
#InfraUapsdViSuspIntv=2000
#InfraUapsdBeSrvIntv=400
#InfraUapsdBeSuspIntv=2000
#InfraUapsdBkSrvIntv=500
#InfraUapsdBkSuspIntv=2000
#DelayedTriggerFrmInt=18000
###Enable PsPoll
#gMaxPsPoll=5
####UAPSD test Setting- End#####
# UAPSD service interval for VO,VI, BE, BK traffic
InfraUapsdVoSrvIntv=0
InfraUapsdViSrvIntv=0
InfraUapsdBeSrvIntv=0
InfraUapsdBkSrvIntv=0
# Make 1x1 the default antenna configuration
gNumRxAnt=1
# Beacon filtering frequency (unit in beacon intervals)
gNthBeaconFilter=50
# Enable WAPI or not
# WAPIIsEnabled=0
# Flags to filter Mcast abd Bcast RX packets.
# Value 0: No filtering, 1: Filter all Multicast.
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
McastBcastFilter=3
#Flag to enable HostARPOffload feature or not
hostArpOffload=1
#SoftAP Related Parameters
# AP MAc addr
gAPMacAddr=000AF589dcab
# 802.11n Protection flag
gEnableApProt=1
#Enable OBSS protection
gEnableApOBSSProt=1
#Enable/Disable UAPSD for SoftAP
gEnableApUapsd=1
# Fixed Rate
gFixedRate=0
# Maximum Tx power
# gTxPowerCap=30
# Fragmentation Threshold
# gFragmentationThreshold=2346
# RTS threshold
RTSThreshold=2347
# Intra-BSS forward
gDisableIntraBssFwd=0
# WMM Enable/Disable
WmmIsEnabled=0
# 802.11d support
g11dSupportEnabled=1
# 802.11h support
g11hSupportEnabled=1
# CCX Support and fast transition
CcxEnabled=0
FastTransitionEnabled=1
ImplicitQosIsEnabled=1
gNeighborScanTimerPeriod=200
gNeighborLookupThreshold=76
gNeighborReassocThreshold=81
gNeighborScanChannelMinTime=20
gNeighborScanChannelMaxTime=30
gMaxNeighborReqTries=3
# Legacy (non-CCX, non-802.11r) Fast Roaming Support
# To enable, set FastRoamEnabled=1
# To disable, set FastRoamEnabled=0
FastRoamEnabled=1
#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
#the RSSI of the new/roamable AP should be for roaming
RoamRssiDiff=3
# If the RSSI of any available candidate is better than currently associated
# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
# registering for reassoc threshold).
# NOTE: Value of 0 means that we would register for reassoc threshold.
gImmediateRoamRssiDiff=10
# SAP Country code
# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
# Example
# US Indoor, USI
# Korea Outdoor, KRO
# Japan without optional byte, JP
# France without optional byte, FR
#gAPCntryCode=USI
#Short Guard Interval Enable/disable
gShortGI20Mhz=1
gShortGI40Mhz=1
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
gAPAutoShutOff=0
# SAP auto channel selection configuration
# 0 = disable auto channel selection
# 1 = enable auto channel selection, channel provided by supplicant will be ignored
gApAutoChannelSelection=0
# Listen Energy Detect Mode Configuration
# Valid values 0-128
# 128 means disable Energy Detect feature
# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
# 10-128 are reserved.
# The EDET threshold mapping is as follows in 3dB step:
# 0 = -60 dBm
# 1 = -63 dBm
# 2 = -66 dBm
# ...
# 7 = -81 dBm
# 8 = -84 dBm
# 9 = -87 dBm
# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
#
# Range Loss (dB) = EDET threshold level (dBm) + 97 dBm.
#
gEnablePhyAgcListenMode=128
#Preferred channel to start BT AMP AP mode (0 means, any channel)
BtAmpPreferredChannel=0
#Preferred band (both or 2.4 only or 5 only)
BandCapability=0
#Beacon Early Termination (1 = enable the BET feature, 0 = disable)
enableBeaconEarlyTermination=1
beaconEarlyTerminationWakeInterval=10
gEnableModulatedDTIM=3
#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable)
gEnableBtAmp=0
#SOFTAP Channel Range selection
gAPChannelSelectStartChannel=1
gAPChannelSelectEndChannel=11
#SOFTAP Channel Range selection Operating band
# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
gAPChannelSelectOperatingBand=0
#Channel Bonding
gChannelBondingMode5GHz=1
#Enable Keep alive with non-zero period value
gStaKeepAlivePeriod = 30
#AP LINK MONITOR TIMEOUT is used for both SAP and GO mode.
#It is used to change the frequency of keep alive packets in the AP Link Monitor period which is by
#default 20s. Currently the keep alive packets are sent as an interval of 3s but after this change
#the keep alive packet frequency can be changed.
#gApLinkMonitorPeriod = 3
#If set will start with active scan after driver load, otherwise will start with
#passive scan to find out the domain
gEnableBypass11d=1
#If set to 0, will not scan DFS channels
gEnableDFSChnlScan=1
gVhtChannelWidth=2
gEnableLogp=1
# Enable Automatic Tx Power control
gEnableAutomaticTxPowerControl=1
# 0 for OLPC 1 for CLPC and SCPC
gEnableCloseLoop=1
#Data Inactivity Timeout when in powersave (in ms)
gDataInactivityTimeout=200
# VHT Tx/Rx MCS values
# Valid values are 0,1,2. If commented out, the default value is 0.
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
gVhtRxMCS=2
gVhtTxMCS=2
# Enable CRDA regulatory support by settings default country code
#gCrdaDefaultCountryCode=TW
# Scan Timing Parameters
# gPassiveMaxChannelTime=110
# gPassiveMinChannelTime=60
# gActiveMaxChannelTime=40
# gActiveMinChannelTime=20
#If set to 0, MCC is not allowed.
gEnableMCCMode=1
# 1=enable STBC; 0=disable STBC
gEnableRXSTBC=1
# Enable Active mode offload
gEnableActiveModeOffload=1
#Enable Scan Results Aging based on timer
#Timer value is in seconds
#If Set to 0 it will not enable the feature
gScanAgingTime=0
#Enable Power saving mechanism Based on Android Framework
#If set to 0 Driver internally control the Power saving mechanism
#If set to 1 Android Framwrok control the Power saving mechanism
isAndroidPsEn=0
#disable LDPC in STA mode if the AP is TXBF capable
gDisableLDPCWithTxbfAP=1
isP2pDeviceAddrAdministrated=1
gReportMaxLinkSpeed=1
#Enable thermal mitigation
gThermalMitigationEnable=1
END
# Note: Configuration parser would not read anything past the END marker

Thanks.
But can u upload the file itself?
Sent from my C5303 using xda app-developers app

Ok
http://www16.zippyshare.com/v/72467115/file.html

Thanks a lot.
Will let u know if it works

[Q][SM-T800] Unable to get high bandwidth on LAN with 802.11ac

Hi,
I'm trying to get full speed of my Airport Extreme 802.11ac on my Galaxy Tab S 10.5". But, no matter what ROM I use, my bandwidth caps at 8 MB/s when I transfer a file from my local NAS using ES File explorer, whereas my Macbook or my iPhone transfers at 40 MB/s at least.
I've checked that my wifi connection is synced at 5 GHz. Link speed is great, minimum at 700 Mbps. I can't post a screenshot because i'm a new user
Does anybody can help me ?
EDIT : the problem faces only with ES File Explorer. With AirDroid, I got 20 MB/s. It's still half from what I can get with an iPad, but there's improvements.

WiFi Hotspot timeout registry key

Hi Folks,
I have win 10 Lumia 650 and use it as wifi hotspot sometimes as i have my 4G sim in it.
The default timeout for turning off hotspot is very low, if i move out of room and the connection drops from connected devices within couple of minutes hotspot turns off.
Does anybody know the registry entry for increasing the timeout period?
Cheers!

Increase WiFi Mobile Hotspot no clients timeout:
The time-out period, in minutes, after which Internet sharing should automatically turn off if there are no longer any active clients. This node can be set to any value between 1 and 120 inclusive. A value of 0 is not supported. The default value is 5 minutes.+
A reboot may be required before changes to this node take effect.
Code:
HKLM\System\ControlSet001\Services\ICSSVC\Settings\PeerlessTimeout
Increase WiFi Mobile Hotspot no internet connection timeout:
The time-out value, in minutes, after which Internet sharing is automatically turned off if a cellular connection is not available. This node can be set to any value between 1 and 60 inclusive. The default value is 20 minutes. A time-out is required, so a value of 0 is not supported.
Changes to this node require a reboot.
Code:
HKLM\System\ControlSet001\Services\ICSSVC\Settings\PublicConnectionTimeout