[Q] Install ClockworkMod to stock Rom - Samsung Galaxy W I8150

I was follow the instruction of this[RECOVERY] ClockworkMod v5.5.0.4and trying to install it.
but i was stuck in odin mode like this:
"Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification."
did i do any steps wrong.!?

Can you SC the full Odin....
Sent from my GT-I8150 using xda premium

you mean the full log of the odin.?!

nereuseng said:
you mean the full log of the odin.?!
Click to expand...
Click to collapse
Full screen capture...
Sent from my GT-I8150 using xda premium

ok!!
wait me a while..

erm sorry just now i try another method in acro's post
by using a adb shell!!
and now i just recover a custom roms!!
sorry for wasting your time

we are all here to help each other....no time is wasted...if time can be wasted in this forum then we wouldnt bother reading up threads like this right?

Related

Odin flash freezes on odin mode.. check plcatform verification

Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
and then nothing happens...
I used the correct OPS and TAR package (the new Alpha8 from CM7)
I changed usb ports, I removed my battery a few times, I tried with another ROM, but every single time this happens.
What can I do? I need my phone.

[Q] Bricked my Gio.

So I've managed to brick my gio and can't access recovery mode anymore, I've tried to flash a stock ROM but when trying to, it gives me this error:
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> odin mode.. check plcatform verification.
<2> VerifyPlatform:V0, P0,R0
<2> START!!!
<2> e - unknown file - "Rar!"
<2> e - unknown file - "=żšęI™5*óœĻ„"
<2> e - unknown file - "EOē»˙jS^{t(0Šž˛J=ĖfµjˇŌźįļm¨V©
3›kžfnē§m#²Åģ×]~öŅV=˙-!ē[›±j3%|œµV°/m©Ń«H>Ōś1µ^bĖ£¶Ļē¯łģ6ė•ncæŖį=ß Ļqa
½[œUC×L°;€…ŲĻv"ī
8ؼ'ˇ`„ƒd5d ˜J{št‚.jČ>H<7^iÉt%Ü>ą§oĒłīąmxŠøBÖBUź*O*æHQ˜rÜåbT½¾°RµprČ’:‹R¶ŖZ¨gČAŚxŃ÷?QV«åa~§]¯v?
ßä5®°īõ[ų£¼õ£æö/¾G,EŸ½ø§z°K*|D˛V5Į<tC¯3eĻżs‹g~0ß>ƒ–›šį;cņ¹ņ%(ü°·*~VV¬*-pDśÕ…ŹÆ°Õ"
<2> e - unknown file - "¨Ņ3[Œž‰āń4=ĮX’}~ą3Ń
ĀépŅ9ō\góŠZxYuĒēÆū÷ü(Ż
ĆÕ˛Ż•KżŲŻżd?źÖ
ā¬§˛ö½ū©»™8YNūz[õ|…X±ø‘·£ŗeNöŸ†°NyõČT`ßn e}`jl€óčg{~Ś!Ó f\Cœ‰ōWczłFėō¹
żŽ›ƒŽRT˜!vkągėģ“¶L!ē£OŒõeP¨&š5ÓæšĄ“yķ6(ȉ“+†Ÿ_;·ŅōŻć<«M% _O–-²<mŽ „Ü÷Ć5N´H
ozłmČĆåč˜
ć/—ŻJ*ųg\=¬Åsˆ’OĆz·!ƒīZ÷ĮĘ<Ė^ŠšŻč˛3ŹŒĘ-ÖD
éÉWģ¸¹™&öyxžwoŹajęż+ų®£/xśBmR"
bump
are you trying to flash a rar file?
go to sammobile and download a stock rom. extract the zip file and you will get a tar file. flash it
Sorry for my bad englisch

HELP! My Galaxy W I8150 Stucked at Odin Mode Only

Goot day XDA developers, I'm am newbie in this site. Sorry for my english.
My Galaxy W I8150 Stucked at Odin Mode Only, I cant access the Stock recovery or even use my phone, when I powered it up normally it states that some upgrade failed on my phone and i need to use kies for emergency recovery.
I tried to use kies but whenever I try to connect it on usb, it just connecting only. It doesn't detect my phone.
Odin detects my phone, but whenever I try to flash STOCK ROM it hangs on this status:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I tried to flash CWM via odin but it hangs for several hours on this status:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> recovery.img download..
Tried to install drivers, change port, change computer, change USB cable.
same results, any other way? i dont have the warranty card so I can't take it to Samsung Service Center.
Thanks in advance.
Best regards,
LourdesMayLao
LourdesMayLao said:
Goot day XDA developers, I'm am newbie in this site. Sorry for my english.
My Galaxy W I8150 Stucked at Odin Mode Only, I cant access the Stock recovery or even use my phone, when I powered it up normally it states that some upgrade failed on my phone and i need to use kies for emergency recovery.
I tried to use kies but whenever I try to connect it on usb, it just connecting only. It doesn't detect my phone.
Odin detects my phone, but whenever I try to flash STOCK ROM it hangs on this status:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I tried to flash CWM via odin but it hangs for several hours on this status:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> recovery.img download..
Tried to install drivers, change port, change computer, change USB cable.
same results, any other way? i dont have the warranty card so I can't take it to Samsung Service Center.
Thanks in advance.
Best regards,
LourdesMayLao
Click to expand...
Click to collapse
Which ODIN version are you using?
Which CWM version are you using? Link to the download page?
Which driver version are you using? Link to the download page (if available)?
Where did you get the ROM from? Link to the download page?
Did you check the md5sum hash in order to make sure the file you downloaded has been fully downloaded?

samsung galaxy gio no boot

Yesterday i try to downgrade my gio
But now my phone screen is black and i can't go to the Download Mode or Recovery mod and etc.
I cant Power on my phone!
Just when connect it with usb cable to my PC (Win xp), and run Odin, The Yellow rectangle appear in odin and when i want to flash it, odin show it:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
is stoped on setup conection.
Please help me, i know i have some problem, because my language is not English!
I hope you understand me.
Are you using the samsung original usb cable
Hi,
Are you sure you are using the original usb cable, i had the same problem exiting from a soft brick using a wrong cable odin stuck on setup connection.
Hope it help
yes
yes using original cable.stuck on setup.

Softbricked Galaxy Gio, don't recognise download mode, only Emergency dload

Hi, I bricked my phone (not first time), it is hanging on samsung logo. I try to flash with odin, but my pc don't recognise when im in download mode(black screen and yellow text:"Downloading...") but when I turn on to emergency dload mode, Odin show me COM 16 and i can start to flash it, but nothing happens.. Just running time and nothing installs. What to do????
My odin shows:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Click to expand...
Click to collapse

Categories

Resources