Have made this thread as the previous one was closed by PG101 due to the "uncertain leave" of Fonehackehsz. We can't do anything on that thread and Fonehackehsz (-Zfreak- if you don't know) has already declared that he won't be back to build CM7. Thus meaning the thread is closed "almost" forever.
So far we have got the ROM to boot up (Thanks to Termagazis and Creed) but with very unresponsive touch screen (Found in Terma's video). We need further discussion's related to the topic to fix this issue.
Here is the link of the ROM - CM7 (Thanks to 'termagazis' )
Here is a video showing the issue (by termagazis) - Youtube
Let us not wait for the return of -zFreak- and move on.
RESERVE!
Reserved! 0
Reserved 2
Reserved 1
Reserved final!
The graphic is fixed
somkll said:
The graphic is fixed
Click to expand...
Click to collapse
What about touchscreen? Is it working?
Reserved here
I am still downloading the file. 25 kB/s speed. Sorry
somkll said:
The graphic is fixed
Click to expand...
Click to collapse
what you mean fixed?
the touch is not working
blackjack1942 said:
the touch is not working
Click to expand...
Click to collapse
touch is working.graphics dont work!you told touch isnt working?
termagazis said:
what you mean fixed?
Click to expand...
Click to collapse
in your video i have seen and observed that touch is working but graphic is not working properly
Reserved
Sent from
Device:samsung galaxy y gt s5360
Rom:hybrid v21 creed mod
Recovery:faqby cwm
somkll said:
in your video i have seen and observed that touch is working but graphic is not working properly
Click to expand...
Click to collapse
yes but you say graphics is fixed!
termagazis said:
yes but you say graphics is fixed!:d
Click to expand...
Click to collapse
i asked that graphic is fixed
somkll said:
in your video i have seen and observed that touch is working but graphic is not working properly
Click to expand...
Click to collapse
Well I saw graphics wasn't working. Touch was working but not everywhere. For example when the changelog pop up showed, the touch worked for OK button but did not for the Lockscreen. As for bypassing the lockscreen, I think we should test by adding some third-party lockscreen like WidgetLocker. If touch would work, we may see the WidgetLocker instead of the Stock one. thus meaning we can bypass the lockscreen.
sorry.link video died...
I think the graphic bug is due to GPU, this CM7 mod has adreno 200 GPU driver
but our device has VideoCore IV GPU...
I had integrated VideoCore IV drivers into this CM7
http://www.mediafire.com/?qub76775td5687a
I doesn't have this device so i cant test it...
Try it and post the result...
aman.droid said:
I think the graphic bug is due to GPU, this CM7 mod has adreno 200 GPU driver
but our device has VideoCore IV GPU...
I had integrated VideoCore IV drivers into this CM7
http://www.mediafire.com/?qub76775td5687a
I doesn't have this device so i cant test it...
Try it and post the result...
Click to expand...
Click to collapse
Ok, i will try this CM7.. downloading.,.
blackjack1942 said:
Ok, i will try this CM7.. downloading.,.
Click to expand...
Click to collapse
u should try this rom with Maroc-OS kernel...
Related
http://forum.xda-developers.com/showthread.php?t=430718
Is available 3d driver for Trinity?
hi
i have asked the T3fd team develloper but i don't have a answer
i had a answer
pcarvalho said:
have no idea if its possible...if it has ati graphics chip...ora a good 3D chip...maybe
Click to expand...
Click to collapse
beher said:
i had a answer
Click to expand...
Click to collapse
Trinity has ati graphics chip?
Yes Trinity has ATI graphics chip
t3fd need open gl
nealed said:
Yes Trinity has ATI graphics chip
Click to expand...
Click to collapse
We can work with it?
seems like it needs open GL driver for trinity
dont know how to get or if it exists
i had a answer from chainfire
Chainfire said:
beher said:
HI
DO YOU MAKE A UPDATE FOR TRINITY?
THANKS
Click to expand...
Click to collapse
No, there are no drivers for trinity.
Click to expand...
Click to collapse
is it impossible to have such drivers because it is not compatible with trinity or because nobody had actually bothered to develop it??
Is it impossible? Just look what these guys are doing with Hermes. As far as I know Hermes as the same ATI chipset as Trinity...
aalim said:
is it impossible to have such drivers because it is not compatible with trinity or because nobody had actually bothered to develop it??
Click to expand...
Click to collapse
ok but we start with hergilla
try this
it half work
http://clutch-productions.com/herg62123_ericmcintire_nothrills_qvga_manila.cab
Software Drivers (best for old devices): Vincent 3d dll
http://forum.xda-developers.com/atta...8&d=1223892257
It works?
rocky200 said:
Software Drivers (best for old devices): Vincent 3d dll
http://forum.xda-developers.com/atta...8&d=1223892257
It works?
Click to expand...
Click to collapse
bad link,guy!
Working Link
vo-1 said:
bad link,guy!
Click to expand...
Click to collapse
Here is the working link:
http://forum.xda-developers.com/attachment.php?attachmentid=121298&d=1223892257
People do not want 3d???
Silence...
rocky200 said:
People do not want 3d???
Silence...
Click to expand...
Click to collapse
I tried to install it. It installed properly, but would never load. The screen would say "Loading Touchflow 3D", then it would error out, and try loading agian. Over and Over. Probably a lack of Memory error.
I'm sure that if it ever works, it's going to be SLOWWWW on the Trinity, but I wanted to see what it looked like anyways.
It will work will,see soon......
SuperSport said:
I tried to install it. It installed properly, but would never load. The screen would say "Loading Touchflow 3D", then it would error out, and try loading agian. Over and Over. Probably a lack of Memory error.
I'm sure that if it ever works, it's going to be SLOWWWW on the Trinity, but I wanted to see what it looked like anyways.
Click to expand...
Click to collapse
Me too. I tried to install the CAB but I had the same problem. Then I thought: Let's to cook it into a Rom. But I had the same bad result.
Get Luck !!!
nikitto said:
Me too. I tried to install the CAB but I had the same problem. Then I thought: Let's to cook it into a Rom. But I had the same bad result.
Get Luck !!!
Click to expand...
Click to collapse
trinity has 2 problems to solve before 3d manilla works fine...
one... the 3d opengl drivers.... we have none and we need some godlike programmers to do them... and so far... none
two... even if we did have some of those uneartly creatures we would still have the memory issue to solve! trinity has as much as 26mbs on startup if a light rom is running. Manilla 3d would take about 20mb i guess... unmanageble...
just tried it out, kinda cool, thought i'd share with you all.....
enjoy!
Download link for Touch HD in post #6
hey thanks for the heads up! but i was just wondering which one did you use? which screen resolution worked?
thanks
dear Jerbo
dear Jerbo
wich version working with hd
thanks
try the sony ericsson X1
Cool ... It is working well using Java!
this is the correct version for the Touch HD... have fun
LINK REMOVED........Mod edit
Why i cant play after i installed it
THX
Thx so much !!
Works fine for me, but I need to run Gyrator (or other screen rotation software)
clb92 said:
Works fine for me, but I need to run Gyrator (or other screen rotation software)
Click to expand...
Click to collapse
works without any screen rotation software for me...
Cant install it on my touch diamond 2 ... :-( ...
works perfectly on the touch hd, thank you very much, excellent excellent game for the touch hd.. i recomend everyone try it.. super . thanks
are there any more games like this???
kecikz said:
Cant install it on my touch diamond 2 ... :-( ...
Click to expand...
Click to collapse
Install the one in post 6. Works ok on D2.
Jerbo said:
works without any screen rotation software for me...
Click to expand...
Click to collapse
It says, that I need to switch my phone to landscape mode...
BTW did you use the Xperia version?
nope, i used the version for the blackstone... i've posted a direct download link for the touch_hd version in post #6 on the first page....
kecikz said:
Cant install it on my touch diamond 2 ... :-( ...
Click to expand...
Click to collapse
exactly, just as Custard said, .cab from post #6 should work just fine..
Jerbo said:
nope, i used the version for the blackstone... i've posted a direct download link for the touch_hd version in post #6 on the first page....
Click to expand...
Click to collapse
Oh, thats why!
What exactly is the difference between those two versions???
thanks . Work on my diamond2.
pretty cool game. works perfectly on HD. automatically rotates.
Excellent game! Thanks to TS.
Okay I've searched the forum but couldn't find anything on this bug for my phone.
I've installed the new CM10.1 RC5 and it works fine until it happens that it turns off the screen like when you lock your phone but I can't get it to display anything again when I click on the "Red" phone button. I have tried restarting the phone but that didn't work, neither did it when I re-installed it. If anyone got a fix for it or just know how I can fix it myself then please help me.
http://forum.xda-developers.com/showthread.php?t=2054438&page=60
read post number no 2.....
Mystical Orb said:
http://forum.xda-developers.com/showthread.php?t=2054438&page=60
read post number no 2.....
Click to expand...
Click to collapse
I know about that and I try and try and try but it won't show anything, it's only the touch buttons that light up and off when I do it.
Gamin' Neko said:
I know about that and I try and try and try but it won't show anything, it's only the touch buttons that light up and off when I do it.
Click to expand...
Click to collapse
Hi
I follow all instructions to install this rom, and i have same problem, but i'm on RC7.
I did format my system before install jb 4.2.2, then installed kernel lge-3.0.x-p350-17-04-2013_18-53, then reboot
I wait around 5 minutes, i used it after that. I set cpu to performance, Memory Management: zRAm: 26%, KSM: enable
Problems found on lock screen: too unresponsive and sometimes doesn't responde at all.
Physical and touch buttons are also unresponsive most of the time, screen keyboard is ok.
Didn't have my language so i install morelocale 2 witch doesn't translate everything.
Any suggestions? Should i go back to cm 7.2? I try to change because of the battery, it was draining to fast!?
Thank's for your attention.
Regards
bjcb said:
Hi
I follow all instructions to install this rom, and i have same problem, but i'm on RC7.
I did format my system before install jb 4.2.2, then installed kernel lge-3.0.x-p350-17-04-2013_18-53, then reboot
I wait around 5 minutes, i used it after that. I set cpu to performance, Memory Management: zRAm: 26%, KSM: enable
Problems found on lock screen: too unresponsive and sometimes doesn't responde at all.
Physical and touch buttons are also unresponsive most of the time, screen keyboard is ok.
Didn't have my language so i install morelocale 2 witch doesn't translate everything.
Any suggestions? Should i go back to cm 7.2? I try to change because of the battery, it was draining to fast!?
Thank's for your attention.
Regards
Click to expand...
Click to collapse
Anything about that touch bug on lockscreen talk with @cybojenix please
jb chocholate kernel
PecanCM said:
Anything about that touch bug on lockscreen talk with @cybojenix please
Click to expand...
Click to collapse
with kernel jb chocholate my lock screen bugs are delete and now is very fast i ve 30-40 mb of free ram with gapps,, whats app and 2 games and chanfire 3d that reduce lag in games yeah
very nice rc7 with kernel jb chocholate
sorry for my bad english D:
PecanCM said:
Anything about that touch bug on lockscreen talk with @cybojenix please
Click to expand...
Click to collapse
so much piling up :L
if people talk to me about the touch bug, I'm only going to say that I'm working on it. however it's a low priority issue at the moment
Why don t you update art rc7?
Sent from my LG-P350 using xda app-developers app
Have you already tried with an alternative lockscreen? Like Holo locker, for example
There is better gapps package for non-neon devices like glide
http://goo.im/devs/tonyp/non-neon-gapps
Full details could be found: http://forum.xda-developers.com/showthread.php?p=39022876&postcount=2
I have made for cm10.1, but it should work with any 4.2 base rom.
Problem:
Glide has tegra 2, witch doesnt support neon instructions, google dropped support non-neon library.
Change
initial:
start with gapps-20130301-signed.zip
replaced:libpatts_engine_jni_api.so, libfacelock_jni.so
removed:libjni_latinime.so
2013.04.22.
Fix google videochat: Add libvideochat_stabilize.so and replace libgtalk_jni.so
Download
Use that: http://goo.im/devs/tonyp/non-neon-gapps Credit for tonyp
My old one could be found here : http://dualhoki.vim.hu/gapps-20130301-i927.zip
Issue
talkback doesnt work, you need to install from google play
Credits
Adam77Root for FaceUnlock fix.
Face unlock can be fixed by replacing libfacelock_jni.so from HOX+. Here is the lib: http://forum.xda-developers.com/showpost.php?p=38946152&postcount=254
great! Thanks
bubor said:
I have made for cm10.1, but it should work with any 4.2 base rom.
Problem:
Glide has tegra 2, witch doesnt support neon instructions, google dropped support non-neon library.
Change
start with gapps-20130301-signed.zip
replaced:libpatts_engine_jni_api.so, libfacelock_jni.so
removed:libjni_latinime.so
Download
http://dualhoki.vim.hu/gapps-20130301-i927.zip
Issue
talkback doesnt work, you need to install from google play
Credits
Adam77Root for FaceUnlock fix.
Click to expand...
Click to collapse
sorry for the noob question but what does it differ exactly from the original gapps? apart from faceunlock fix, I got that, and that's cool (thanks Adam )
soadzoor said:
sorry for the noob question but what does it differ exactly from the original gapps? apart from faceunlock fix, I got that, and that's cool (thanks Adam )
Click to expand...
Click to collapse
removed one file, and replace 2 with non-noen one.
I can replace all 3, but cm10.1 has own libjni_latinime.so
bubor said:
removed one file, and replace 2 with non-noen one.
I can replace all 3, but cm10.1 has own libjni_latinime.so
Click to expand...
Click to collapse
Okay I got that you removed/replaced some files, but what does it effect? how can someone experience the difference? I dont want to be rude, I'm just curious
soadzoor said:
Okay I got that you removed/replaced some files, but what does it effect? how can someone experience the difference? I dont want to be rude, I'm just curious
Click to expand...
Click to collapse
those 3 library dont compatible with tegra 2, because tegra 2 has no neon. You shouldnt experience any difference, only it fixes some apps.
Replacing the libjni_latinime.so fixes auto correction and word prediction at the cost of swype function.
Adam77Root said:
Replacing the libjni_latinime.so fixes auto correction and word prediction at the cost of swype function.
Click to expand...
Click to collapse
swype function has never been working on the cappy glide, so I guess it's just fixes the auto correction and word prediction?
soadzoor said:
swype function has never been working on the cappy glide, so I guess it's just fixes the auto correction and word prediction?
Click to expand...
Click to collapse
Well, then yes.
I have opened a thread about non-neon gapps a while ago:
Non-neon Gapps (Android 4.2) dev-discussion thread
Feel free to join in, I were terribly busy fixing other bugs on my phone (bluetooth, WifiAP etc.) so I didn't yet have time to look into it closer.
As all Tegra2 / armv6 etc. devices are suffering from the same issues it might be interesting for more people.
Please note that it's (on purpose) a thread in the development discussion section, I will delete noobish posts.
Although I think the package here from the OP is already pretty complete - I got some additional gtalk non-neon libs which fix the gtalk videochat, will post them later today or tomorrow in the thread above.
I'm not aware of any other neon related bugs (but as I said, I didn't spent a lot of time, yet).
Adam77Root said:
Well, then yes.
Click to expand...
Click to collapse
Adam,
How did you guys end up fixing the picture rotatation when they are taken in portrait mode ?
kick buttowski said:
How did you guys end up fixing the picture rotatation when they are taken in portrait mode ?
Click to expand...
Click to collapse
It isn't fixed yet. There are still some issues with the camera. This can be fixed in a camera wrapper which can also fix ISO modes and exposure compensation. Unfortunately, camera wrapper causes lockups sometimes.
Sent from my CM10.1-powered GT-I9103
I finally found some time to work further on the non neon gapps package.
All details here:
http://forum.xda-developers.com/showthread.php?p=39022876&postcount=2
It should fix pretty much all remaining issues the old one had
Thanks
I tryed to install chainfire 3d on mf2 but my mobile gets stuck on the "Samsung galaxy ace 2" screen. On GB it works. It is a compatibility problem with JB?
Edit: I see now that isn't compatible, any alternative to chainfire to configure the gpu?
kentone said:
I tryed to install chainfire 3d on mf2 but my mobile gets stuck on the "Samsung galaxy ace 2" screen. On GB it works. It is a compatibility problem with JB?
Click to expand...
Click to collapse
No, it isn't compatible with Jelly Bean. Next time ask here: http://forum.xda-developers.com/forumdisplay.php?f=2375
KingDani1997 said:
No, it isn't compatible with Jelly Bean. Next time ask here: http://forum.xda-developers.com/forumdisplay.php?f=2375
Click to expand...
Click to collapse
Ok, sorry!
Quickly yes now you can choose a fake gpu in gltools just search for it in google play...It takes less time to click THANKS than to write..
manav113 said:
Quickly yes now you can choose a fake gpu in gltools just search for it in google play...It takes less time to click THANKS than to write..
Click to expand...
Click to collapse
have you tried to change to the fake gpu? if so did the graphical performance(especially in games) changed?
arhamiq said:
have you tried to change to the fake gpu? if so did the graphical performance(especially in games) changed?
Click to expand...
Click to collapse
you can try to waqtch video in youtube .there are very few videos on the tool .I am going to create and upload a video tomorrow.it surely changes every bits of game and make it playable..and yes it changed...