Help - blank screen and cannot access boot menu - Wildfire Q&A, Help & Troubleshooting

A friend has asked me to look at his Wildfire, he said it was updating the Market and then blank screened. Since then it will not turn on, vibrates, then nothing.
I suspected screen (replaced a few wildfire ones now) but no sign of life from touch buttons, volume key, etc - so suspect it is bricked.
Tried to flash it with RUU but the phone will not go into the boot menu via volume down & power on. I've tried numerous times and it went into boot menu once, but you could not select anything, no keys working.
Hooked up to laptop and laptop could see it, but when you try to run the RUU you get Error 170, probably becaused it's not actualy in USB Boot mode.
Has anyone seen this? Any other tricks to get it into boot menu? Anything I can run from laptop or SD card to force it into a recovery or boot menu?
This is a stock ROM phone, not modified at all.
Any help much appreciated*

I have a way but I cant remember it lol
If I can remember when I get home, i'll re-post.

OK, cool
Made slight progress today, even though I had the boot menu come up once yesterday, but no response from keys, I did notice that even though I was trying to access boot menu, it was actually acting like it was in the menu, just blank screen, i.e. if I held power button afterwards I got no vibration, but if I did pull battery and hold power, I did, as if it was booting up.
I wonder if in actual fact the screen is dead, but also there is a software hang up, as if display was dead, you would still be able to swipe the screen, get touch keys to light up when pressed, etc.
Anyway, so I went into boot mode, blank screen, pressed power anyway which would be FASTBOOT - right?
Hooked up to PC, ran an RUU and it connected OK, went through process but failed on ID, because the phone has a T-Mobile ROM and I was trying to flash with non-branded one.
So I either need to find a T-MOB UK RUU, I found one but it wouldn't run, or I need to create a goldcard (can I do that with a semi bricked device?) and go down that route.
Either way, I'm pretty sure the LCD is dead, so for the sake of £7.50 I'll replace that first, even if it has got further issues, having a working LCD will help!!

yeah get the screen fixed first.
you will only have to fix the screen later and the hassle of trying to fix a phone with broken screen, to have to have it fixed later anyway isnt really the most logical way of doing things

Related

[FIXED] TP2 Wouldnt turn on (couple probs lead to this)

Ok so lets start from the beginning. I dropped my phone and although no visible physical damage is visible my volume up button stopped working. When i used to turn on my phone the volume display wouldnt quit showing unless i pressed the volume down button, but volume up would not respond (im guessing vol up is constantly pressed)
I decided to flash my phone, but i also decided to perform Task29 (format internal storage) (From Here)because i have been flashing quite a bit. While doing this i completely forgot that my vol up button isnt working... so i was stuck on the first boot screen, with no internal memory, and since my vol up button is broken no way to get into the bootloader.
I decided to turn it off and leave my phone of the charger and go to sleep (because thats just what i do at night)
In the morning my phone would not turn on at all
Any ideas? I cant send it for repair to T-Mo because its HardSPL and i cant really return it to stock if it wouldnt turn on :/
Edit: Ok i think the non powering issue is battery, the main concern however is, how to enter bootloader without the use of the volume buttons... or flash a rom in any way so that the phone is actually usable.
Thanks in advance
Ok somehow on the millionth's time of trying to get into the bootloader (holding the vol down button) it finally worked =]

[Q]Successfully rooted-and installed GingerBread- then attempted to restore

Hi,
I broked it???
Well as my title states, I rooted my phone- then went on to install Gingerbread (? spelling ). After two days of disliking it. I wanted to go back to the regular htc or pre gingerbread setup/install.
During the process I was unable to use the back up that was on the sd card and that was backed up on my pc. Rom Manger kept saying it was corrupt, well i took it that way.......
From there I found this-
androidforums.com/incredible-all-things-root/99828-video-howto-unroot-incredible-downgrading .html
I did everything the instucitions said, and then when it was time for it to reboot and do its thing.. It sat at a black screen... And that where I am at now.
Recap:
After attempting to restore defaults using PB31IMB file. I'm now stuck at a NO SCREEN.
When you start the phone the phone vibrates once. Like it starting up but nothing. I hold down the VOL DOWN and Power, nothing. I hold down the VOL UP and power, I gut nothing but three vibrates...
I have attempted:
I've tried using ADB, but ADB is unable to see the device when I do, ADB device. Both using Vol + and power and Vol - and power. But nothing.
Am I S.O.L?
Well... I think I got the phone to boot normally... I jut don't have a LCD screen... No picture.... Still trying
Fixed it.. Sorry I posted this...
Found out that i have a SLCD or something, used this:
incredibleforum.com/forum/hacking-help/6693-droid-incredible-slcd-brick-help. html
Bye

Possible brick?

Hi everyone,
I hope someone can help me recover my Desire. Earlier today I tried flashing one of the alpharev HBOOTs to prepare for LeeDroid 3.0.7 Data++ edition. At some point something must have went wrong, because when I tried to do 'fastboot reboot-bootloader' the phone just turned off (or so it seemed...explanation further on). I subsequently tried pushing the power button to turn it back on, to no effect.
After leaving it for a bit (about 15 minutes or so), I decided to disconnect from the PC and pull the battery, since nothing was working. This is where the REAL problem appears. Now my phone refuses to boot, even refusing to vibrate when the power button is pushed. Here are some of my observations:
After pulling the battery and replacing it, then connecting to the charger, the 'charging' LED lights up
When I press power, the 'charging' LED goes off, but nothing else happens (no vibration, no boot sound, no screen action)
Holding the Volume Down key while pressing power (after a battery pull and replace) doesn't change anything regarding the boot process described in the point above
As far as I can tell, attempts to get into recovery/fastboot have failed
Holding the Back key while pressing power (after a battery pull and replace) also doesn't help
I've searched Google for about 3 hours now, and nothing I've come across seems to help. Also, this isn't an SLCD brick, since the phone has an AMOLED screen.
Any help getting the phone up and running will be GREATLY appreciated.
Thanks.
my friend warning are that no matter what DO NOT REMOVE BATTERY or it will possibly brick so in my opinion 95% you bricked your phone
hi, don't sounds good at all...
when you plug and push the power button, what does says your comp???
device unknow... nothing.
worse case scenario would be to put a PB99IMG
look at this to find the one matches with your phone (stock rom version )
http://shipped-roms.com/index.php?category=android&model=Bravo
attached an howto http://dl.dropbox.com/u/22152187/How to Extract the ROM from an RUU.doc
hope this help
Yup you failed to flash the most fatal part of you system(the hboot), and after trying to reboot the first time, you had no way to correct the error, as it is no longer able to load the hboot in order to change anything on the flash-rom. So no pulling the battery didn't change anything, you were already bricked.
No way to bring it back through usb afaik
edit: and no ruu is very unlikely to work as well, as the hboot, which is supposed to flash it doesn't even boot.
only way i know of is jtag, which allows a specialized connector to flash the flash-rom directly through a jtag port on the motherboard, however, the riff box needed is quite expensive(129$). Good luck. I feel sorry for you.

[Q] Tried to install Beatmod ICS, stuck on "screensaver" usb and recovery won't work

[Q] Tried to install Beatmod ICS, stuck on "screensaver" usb and recovery won't work
Hi guys,
I've watched the n00b video and been googling for the last few hours as well as reading through various pages on the XDA forum. I've found a lot of problems that are kinda similar and tried various solutions but don't seem to be quite getting there.
Basically I had Virtuous Affinity as the OS and clockworkmod installed (should be the most up to date versions of both, they were put on no more than a week ago) as well. I also had a backup of current OS and so on on the SD card, as well as the original zip of the rom.
I decide I want to give ICS a go and so I downloaded the betamod ICS and then loaded it. It asked me if I wanted to do a dalvik cache wipe, a dalvik cache + data wipe and a third option I don't recall. I went with the dalvik cache wipe (at the time I was under the impression that was the correct course of action) then put it back in my pocket while ICS installed.
I get my phone out of my pocket later and it's kinda stuck on what looks like (but logically isn't, I'm guessing it was meant to be a splash screen type thing while ICS installed or some such) a screensaver which just loops endlessly. The only thing you can really do is take the battery out and turn her on again, in which case you once again end up in the endless screensaver loop.
I've tried booting to recovery using volume - and the power button and unfortunately it just boots straight into the looping screensaver again.
Getting a bit worried and feeling adventurous I tried seeing what I could do with ADB, however the computer seemed unable to recognise that any device was connected with ADB devices not listing anything.
I've read up a lot and I'm at a loss as to what to do - there's a rom on the SD card and there also should have been a backup but I just can't get it into recovery.
I do have the ability to view the SD card on another device and interact with it, so if there's a potential SD fix, that's certainly not out the window.
But yeah, I'm clueless how to proceed here and very green at the whole rom business. Can anyone advise what I might try to do from here? I don't care what state I end up going back to, or if I lose my data, I can get all that back, I just want the phone in some semblance of basic operation.
I'll be keeping an eye on the thread, if I've left out any pertinent data ask away and thanks in advance for anyone with a clue how I can fix this mess .
EDIT: Post may be better off in ICS thread above and I do apologise if so, I would move it but I seem unable to delete it.
Remove battery for 5 seconds and then try again to boot into recovery using volume -and power button.
ik222 said:
Remove battery for 5 seconds and then try again to boot into recovery using volume -and power button.
Click to expand...
Click to collapse
I have, it doesn't work. I've left the battery out for a fairly long period. Volume - + power still just brings it back to the "screensaver" loop.
Thanks for the suggestion though.
Turn the phone off completely; pull the battery out for a bit then replace it and don't touch anything. Don't try to turn it on. Plug the phone by usb to your pc (still turned off). At the command prompt in the folder containing adb.exe type "adb reboot recovery" - the phone should power on and go to recovery where you can wipe properly and reflash whatever you want.
You should be able to boot to recovery using the volume down + power button combo (hold the volume-down key, then press and hold the power button and keep both held until you get to the bootloader menu); the only thing that's wrong with your phone is that you've flashed one ROM over another without wiping it first, so the ROM can't load but this shouldn't affect your bootloader or recovery.
Worst case you can flash a RUU which will restore it to the official firmware; you'll then need to re-root and re-install a recovery image to be able to flash custom ROMs again.
Very helpful post, thanks! I'll try all that and see how I go, I'll post if I still have trouble.
Yeah I dunno why I can't boot to recovery it's weird. The volume button wasn't working, so I removed it and am pressing in the volume down portion of the volume button with a pen while holding down the power button. It's possible perhaps I'm not successfully depressing volume down, but I'm 99% sure I am and that that's not it. I am however doing it as you and other guides advise, depress volume down, hold it and then depress power and hold both for about three seconds, no joy!
Anyway, as said, I'll try what you're recommending and see how I go. Thanks!
hopscotchjunkie said:
At the command prompt in the folder containing adb.exe type "adb reboot recovery"
Click to expand...
Click to collapse
Curious what you mean by this? Cause there's no command prompt in the folder ADB is in. Do you mean in command prompt, be in the folder, i.e. c:\abd kinda thing? I tried just loading command prompt and typing abd reboot recovery, no device detected - no joy.
Ethicistabdiel said:
Curious what you mean by this? Cause there's no command prompt in the folder ADB is in. Do you mean in command prompt, be in the folder, i.e. c:\abd kinda thing? I tried just loading command prompt and typing abd reboot recovery, no device detected - no joy.
Click to expand...
Click to collapse
Yeah that was what I meant; I've got a feeling that that only works when the phone is powered off if you had USB debugging activated on the phone beforehand, so if that's not working that might be why.
c:\adb
results in error: device not found.
ADB app itself is in C:\adb\platform-tools but when I try that it goes The System cannot find the path specified. I've tried cd/adb and I can get that far but I can't get to adb/platform-tools.
EDIT:
Okay, I managed to get to c:\adb\platform-tools but adb reboot recovery is still advising error: device not found. Guessing perhaps I didn't have usb debugging enabled. Are you able to suggest another work around at all? I'm happy to flash it to whatever, I don't mind losing data, just want to get it in working order again. I don't see how I can though when I seemingly don't have access to recovery or USB...hrmm, must be some way around.
Accidental double post, sorry.
You need to try get into recovery mode, where you can do a full wipe and see if that fixes anything.
Firstly, remove your battery then re-install it, your phone should still be turned off at this stage. Press and hold the volume down button, then additionally press and hold the power butter, until something appears on the screen. If the bootloader appears, you can then boot into recovery from there.
If the above fails to work, report back with your results and hopefully something else will be suggested.
Ethicistabdiel said:
c:\adb
results in error: device not found.
ADB app itself is in C:\adb\platform-tools but when I try that it goes The System cannot find the path specified. I've tried cd/adb and I can get that far but I can't get to adb/platform-tools.
EDIT:
Okay, I managed to get to c:\adb\platform-tools but adb reboot recovery is still advising error: device not found. Guessing perhaps I didn't have usb debugging enabled. Are you able to suggest another work around at all? I'm happy to flash it to whatever, I don't mind losing data, just want to get it in working order again. I don't see how I can though when I seemingly don't have access to recovery or USB...hrmm, must be some way around.
Click to expand...
Click to collapse
Your only other option to get into recovery is the volume-down/power-on combination. Like I said, I can't think why that's not working unless it's related to your missing volume button (maybe it's not maintaining a constant pressure on the button when you're using whatever to press through the hole).
If you still can't get that to work, I would suggest finding a stock RUU and flashing that. It's an .exe file that runs from your PC and will return your ROM, bootloader and radio back to stock. Obviously that means you'll lose root and your custom recovery so you'll need to do all that again from scratch. There's a sticky in the dev section with a link to a thread with various RUUs (it's named something along the lines of "shipped & test ROMs" - I'll check that and link to it once I've dragged myself out of bed to the computer). You'll lose all your data, but if you took a backup beforehand you can restore that once you're back up and running.
//sent from my Desire HD using Tapatalk; all errors entirely intentional.
Yeah I'm starting to think perhaps the down button is just broken.
What state should the phone be for the RUU, turned off with usb plugged in or turned on? Bearing in mind, that when on, all it will do is the "screensaver". Will it work in either of those states?
Thanks, will deffo research more when I get home. Appreciate the help immensely.
http://forum.xda-developers.com/showthread.php?t=824357&page=5
Guessing you mean that as far as the ruu thread. Am downloading a stock rom atm, with shaped internet till tomorrow, meh! Will see how I go. Have a feeling phone was probably Vodafone branded at stock though, so that could make for extra fiddling but yeah, fingers crossed.
If you are able too install a stock-rom you can work from their than install 4EXT recovery
touch than you doen't need the volume buttons.
I downloaded the most recent stock rom on the link above. When I try to install it though, phone off or on, it advises a USB connection error. Is this likely to be because I originally had vodafone stock and need to make a gold card, or should it still at least be recognising it? It does advise not to run any programs on the phone or anything when while installing the update, but of course, as long as my phones turned on it's stuck on the damned screensaver loop.
http://forum.xda-developers.com/archive/index.php/t-841890.html
Gonna give that a go, fingers crossed!
D'oh, just found out my mobile was Three at stock and not Vodafone, the search continues .
Gah, I'm about tearing my hair out here, I want my damned phone back . Stuck using a $79 Huwawei Vodafone thing at the moment and it's so so so awful.
Anyway. I was under the impression that making a goldcard would mean I could RUU a non-Three stock rom on the phone. I made a goldcard following these instructions; http://www.addictivetips.com/mobile/how-to-make-gold-card-for-htc-desire-hd/
Then I turned the phone on as the RUU advises, (meaning it's scrolling through the feckin' "screensaver") and start the process and once again get a USB connection error.
What's the better process at this stage, try and take it back to Three stock? I don't see how I can at the moment, the only Three stock I can find seems to be rom, not RUU, meaning I'd need to load from the phone, which I can't due to no recovery. Or should I keep trying to get the goldcard thing to work, maybe try some different RUU's or something?
I'm open to any other suggestions as well. Had a bit more of a fiddle around with my volume down button, no matter what I do though, I can't get recovery mode. Always boots first to the white HTC screen and then starts the infernal "screensaver" loop.
Ethicistabdiel said:
Yeah I'm starting to think perhaps the down button is just broken.
What state should the phone be for the RUU, turned off with usb plugged in or turned on? Bearing in mind, that when on, all it will do is the "screensaver". Will it work in either of those states?
Thanks, will deffo research more when I get home. Appreciate the help immensely.
Click to expand...
Click to collapse
How come the volume down button be broken. When you were using Affinity Rom weren't you able to use your volume button for music. Remove SD card from phone then press "First - Volume down gently for 2 sec" & press-hold power button when it goes into bootload place your sd card back select option "REBOOT RECOVERY". I think your panicking too much just be patient nothing is wrong, i think your just hurrying it up...
The volume button didn't work before either. I had to manually adjust volume from settings. I thought it was just because of the dodgy plastic button on top, but using a pen to depress the button underneath doesn't work either.
Believe me, I've been trying to fix this for days now, every different way of depressing volume down in order to get to recovery has not worked. Short of taking the phone apart and seeing if I can see what's wrong with the button (doubtful with my level of expertise) then it ain't happening via that method.
Got a little bit hopeful with this;
http://www.htcdev.com/bootloader/ruu-downloads
But that too requires my phone to be in usb debugging mode, which of course, it isn't.
Is there anyway to force the phone into usb debugging mode using some form of hack or some such? The thing is, it is powered and everything, I can turn it on, the screen works and all that jazz and indeed the phone will charge from USB and the computer makes a noise when I plug or unplug it, the phone itself however won't do anything other than the "screensaver" ICS installation loop. I guess I'm thinking where there's life there's hope and perhaps there's some way in that state I can get it to switch debugging on, though I think I'm reaching at this point .
Ethicistabdiel said:
The volume button didn't work before either. I had to manually adjust volume from settings. I thought it was just because of the dodgy plastic button on top, but using a pen to depress the button underneath doesn't work either.
Believe me, I've been trying to fix this for days now, every different way of depressing volume down in order to get to recovery has not worked. Short of taking the phone apart and seeing if I can see what's wrong with the button (doubtful with my level of expertise) then it ain't happening via that method.
Got a little bit hopeful with this;
http://www.htcdev.com/bootloader/ruu-downloads
But that too requires my phone to be in usb debugging mode, which of course, it isn't.
Is there anyway to force the phone into usb debugging mode using some form of hack or some such? The thing is, it is powered and everything, I can turn it on, the screen works and all that jazz and indeed the phone will charge from USB and the computer makes a noise when I plug or unplug it, the phone itself however won't do anything other than the "screensaver" ICS installation loop. I guess I'm thinking where there's life there's hope and perhaps there's some way in that state I can get it to switch debugging on, though I think I'm reaching at this point .
Click to expand...
Click to collapse
The only option i can think of is "Fix your volume button from your nearest Service centre". Without that you cant do anything. I am Sorry....

Wildfire - blank screen will not go into boot menu??

A friend has asked me to look at his Wildfire, he said it was updating the Market and then blank screened. Since then it will not turn on, vibrates, then nothing.
I suspected screen (replaced a few wildfire ones now) but no sign of life from touch buttons, volume key, etc - so suspect it is bricked.
Tried to flash it with RUU but the phone will not go into the boot menu via volume down & power on. I've tried numerous times and it went into boot menu once, but you could not select anything, no keys working.
Hooked up to laptop and laptop could see it, but when you try to run the RUU you get Error 170, probably becaused it's not actualy in USB Boot mode.
Has anyone seen this? Any other tricks to get it into boot menu? Anything I can run from laptop or SD card to force it into a recovery or boot menu?
This is a stock ROM phone, not modified at all.
Any help much appreciated
Am sorry but this the Wildfire S forums not Wildfire , write above on find your device buzz and go to that phone , it is the Wildfire forum , those guys might answer ...
Oops, sorry, my mistake!!

Categories

Resources