Related
Let me start off by saying that the tweak I used is labeled as being for T-mobile...I don't know if it will make any difference for any other carriers since I can't test, but it made a HUGE difference in my GPS lock times. I can't say if it makes any difference in accuracy, since my GPS already seemed to be plenty accurate, it just took waaaay too long to get a lock before, if at all.
I only recently upgraded to WM6.5, and I hadn't yet bothered to mess with the GPS much until today. Up until now, it would take up to 30 seconds to get a lock while I was outdoors, and indoor locks (or even in a vehicle) would take much longer, or just never happen. I got much better performance before I upgraded my ROM, so I know it wasn't just the places I was trying it.
Today I installed the Wordsmith cab below, and *POW!* I now get locks in less than 2 seconds outdoors, and no more than 5 seconds indoors!! It actually takes longer for google maps to activate the 3G connection for aGPS than it does for it to then lock satellites and update the position
SO, I highly recommend this for any tmo users that think their GPS should lock faster than it does. Anybody else is welcome to try it, but since I don't know exactly what the secret sauce is in this one I can't say if it will help. I know this cab has been floating around, but I was impressed enough with my results that I wanted to make sure it had visibility.
Now, I've also attached fone_fanatic's cab that adds google's aGPS settings. I applied it today prior to the Wordsmith cab, but it only made a small difference. However, this is the cab that got my GPS working so well on my 6.1 ROM, so I'm including it here for anyone who is still needing another solution to improve their GPS performance.
EDIT: yes, for those who might ask, I did run QuickGPS prior to all testing
Works great!
I tried it out tonight on my TP2 with AT&T and it works great!!
Google maps got a GPS lock in just a few secs INSIDE!
Thanks for sharing!
Interesting ... there is a t-mobile section where specific ip address ranges and t-mobile servers are written to the registry, so buyer beware on that front.
Best regards,
-boggsie
Code:
<?xml version="1.0" encoding="utf-8"?>
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver">
<parm name="OldLogFile" value="" datatype="string" />
<parm name="MaxLogFileSize" value="0" datatype="integer" />
<parm name="CurrentLogFile" value="\windows\GPSLogFile.txt" datatype="string" />
<parm name="IsEnabled" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers">
<parm name="MaxBufferSize" value="512" datatype="integer" />
<parm name="SleepOnNoData" value="100" datatype="integer" />
<parm name="OutputBufferSize" value="512" datatype="integer" />
<parm name="InputBufferSize" value="512" datatype="integer" />
<parm name="RetryWaitOnError" value="3" datatype="integer" />
<parm name="CurrentDriver" value="GPSOneDevice" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOneDevice">
<parm name="PollInterval" value="100" datatype="integer" />
<parm name="Version" value="2" datatype="integer" />
<parm name="CommPort" value="GPS0:" datatype="string" />
<parm name="DriverName" value="GPS Device Driver" datatype="string" />
<parm name="FriendlyName" value="QualComm GpsOne Card, version 0.0" datatype="string" />
<parm name="InterfaceType" value="POLL" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOneEmulate">
<parm name="Filex" value="\windows\GPSOneFileSimulation.txt" datatype="string" />
<parm name="FriendlyName" value="QualComm GpsOne File, version 0.0" datatype="string" />
<parm name="InterfaceType" value="File" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOnePort">
<parm name="CommPort" value="GPD10:" datatype="string" />
<parm name="FriendlyName" value="QualComm GpsOne Card, version 0.0" datatype="string" />
<parm name="InterfaceType" value="COMM" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Multiplexer">
<parm name="DriverInterface" value="COM4:" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Multiplexer\ActiveDevice">
<parm name="Index" value="4" datatype="integer" />
<parm name="Prefix" value="COM" datatype="string" />
<parm name="Context" value="305414496" datatype="integer" />
<parm name="Flags" value="2" datatype="integer" />
<parm name="Keep" value="1" datatype="integer" />
<parm name="Dll" value="GPSID_HTC.dll" datatype="string" />
</characteristic>
<characteristic type="HKLM\Software\HTC\SUPL AGPS">
<parm name="ServerIP" value="10.176.29.225" datatype="string" />
<parm name="DynamicURL" value="lbs.geo.t-mobile.com" datatype="string" />
<parm name="TLSHostName" value="lbs.geo.t-mobile.com" datatype="string" />
<parm name="ServerURL" value="lbs.geo.t-mobile.com" datatype="string" />
<parm name="GPSMode" value="2" datatype="integer" />
<parm name="EnableAGPS" value="1" datatype="integer" />
<parm name="Network" value="T-Mobile Data" datatype="string" />
<parm name="GPRSConnection" value="T-Mobile Data" datatype="string" />
<parm name="PrivacyMethod" value="3" datatype="integer" />
<parm name="EnabledPrivacyMethod" value="1" datatype="integer" />
<parm name="CloseConfirmMsgTime" value="60" datatype="integer" />
<parm name="EnableLocInfo" value="1" datatype="integer" />
<parm name="ServerPort" value="7275" datatype="integer" />
<parm name="QosPerformance" value="89" datatype="integer" />
<parm name="QoSAccuracy" value="50" datatype="integer" />
<parm name="TimeBetweenFixes" value="1" datatype="integer" />
<parm name="NumberFixes" value="999999999" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\SUPL AGPS\DefaultSetting">
<parm name="EnableAGPS" value="1" datatype="integer" />
<parm name="CloseConfirmMsgTime" value="60" datatype="integer" />
<parm name="PrivacyMethod" value="0" datatype="integer" />
<parm name="EnableLocInfo" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\SOFTWARE\HTC\QuickGPS">
<parm name="EnableMultiCertData" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\BuiltIn\RIL">
<parm name="AGPSNVSetting" value="1" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
Slick. Looks like a cab for most of the settings in the stickied tips thread with some T-Mobile specific aGPS settings. I'll have to try it out, thanks!
I'm glad it's useful!
It's probably worth mentioning that I'm using the .57 radio that came stock in the tmo 6.5 ROM, I'm sure it's part of the combination that makes this work so well...some users have reported improved GPS performance just from switching to that radio.
Thanks for dissecting that boggsie, it looks like it gets in there pretty deep. I honestly haven't been able to backtrack to where I found the cab, I just saw it in a drive-by reading of some thread, and thought it would be good to grab it...guess I was right
The next thing I'd like to know is if this would work the same on the (tmo) HD2...I hope to have one in the next few days, and I don't yet know if all the driver/registry settings it changes apply the same to that phone. If anybody here can answer that, please do...otherwise I'll post it over in that forum for somebody to look at or test
Confirmed Second Success On ATT TP2 GPS
I also got a lock within 5 seconds indoors upon opening Google Maps. Thanks again...This is definately a keeper.
dare i install on my tilt 2 to lower the lock time to under 2 minutes... my att agps settings cab never worked right. at first i thought my gps was broken. i swear the stock att rom did better than the stock htc.
sirphunkee said:
Let me start off by saying that the tweak I used is labeled as being for T-mobile...I don't know if it will make any difference for any other carriers since I can't test, but it made a HUGE difference in my GPS lock times. I can't say if it makes any difference in accuracy, since my GPS already seemed to be plenty accurate, it just took waaaay too long to get a lock before, if at all.
Sorry is T mobile 3g or cdma? as if 3g will give a shot
I only recently upgraded to WM6.5, and I hadn't yet bothered to mess with the GPS much until today. Up until now, it would take up to 30 seconds to get a lock while I was outdoors, and indoor locks (or even in a vehicle) would take much longer, or just never happen.
6.1 was rock solid for GPS lock (talking under 10 sec cold start) but now on 6.5 and has been not at all .. Acquiring Satellites is the most frequent message here in Australia Have HTC trying to find a solution but they sent a cab and its not working well ... started GPS 20 times today and only managed 3 locks, which was really 1 as did not turn off from first destination
Click to expand...
Click to collapse
palah said:
Sorry is T mobile 3g or cdma? as if 3g will give a shot
Click to expand...
Click to collapse
T-Mobile is GSM (i.e., NOT CDMA).
Eleazar Bendixen said:
I tried it out tonight on my TP2 with AT&T and it works great!!
Google maps got a GPS lock in just a few secs INSIDE!
Thanks for sharing!
Click to expand...
Click to collapse
8526WM6 said:
I also got a lock within 5 seconds indoors upon opening Google Maps. Thanks again...This is definately a keeper.
Click to expand...
Click to collapse
Are the both of you just loading the 'FF Google aGPS Settings Generic.cab' or are you also loading the 'Wordsmith9091 T-Mobile GPS Fix.cab'?
I'm also on AT&T, so I'm curious to learn if the T-Mobile cab would be beneficial to me, despite it being T-Mo specific.
Thanks,
Debbie
I am curious also. Stock 6.1 lock time is alot better then my current flashed rom. I think i may bite the bullet and try. Ill let you guys know if it works
rajb1031 said:
I am curious also. Stock 6.1 lock time is alot better then my current flashed rom. I think i may bite the bullet and try. Ill let you guys know if it works
Click to expand...
Click to collapse
I'm using Stock US Tmo ROM, and it definitely speeded up my satellite acquisition time. Good programs!
More than likely your device is always tracking your position now, so when these other apps start your position is already known. This could reduce battery life.
oisact said:
More than likely your device is always tracking your position now, so when these other apps start your position is already known. This could reduce battery life.
Click to expand...
Click to collapse
Any way we could look to confirm if it's doing that? I for one don't have any gps icon on my notification bar. However, when gmaps opens, it initially shows 0 satellites locked, for the first second or so, even after the aGPS link is established, so I dunno if that disproves that theory or not.
I tried it on wm 6.5 standard at&t rom and it actually slowed my lock times. Uninstalled it and now the lock is within 5 seconds, much faster than before I installed/uninstalled this .cab. Not sure what it did or did not change in the registry, but it sure slowed my lock times in tomtom, copilot 8 and google maps. Not sure this will work for anyone other than T Mobile, and certainly did not help my AT&T Tilt2.
Hi!
I'm developing a software for Windows Mobile 6.5 using Compact Framework 3.5.
We need to sync the application with a server component using a network connection proxied by ActiveSync.
Now, some software magically changes the settings for the access to private network.
We need it to be set to "Work", but some other software silently changes this to some other destination.
When the user now tries to connect to our server, she won't be able to get a connection as the CM now tries to establish this connection using UMTS instead of the wired ActiveSync connection.
Now, to solve this problem I digged through documentation and forums to find any information about the CM configuration.
I found that I could automatically correct this problem by using XML Provisioning. I think I just have to remove every key below \\HKLM\Comm\ConnMgr\Providers that starts with "null-corp" and replace it by a new key named "null-corp-{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}" with an appropiate configuration.
Doing that by editing the registry manually solves my problem.
Now here's my problem:
When I send a document like this:
Code:
<wap-provisioningdoc>
<characteristic type="CM_ProxyEntries">
<nocharacteristic type="null-corp-{0A0A8396-2C1A-4EC3-A5C4-FA760015DA07}" />
<nocharacteristic type="null-corp-{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}" />
<nocharacteristic type="null-corp-{FBF831F6-CCB5-407D-AA6E-FBE981A23D8F}" />
<characteristic type="null-corp-{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}">
<parm name="SrcId" value="{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}" />
<parm name="DestId" value="{A1182988-0D73-439E-87AD-2A5B369F808B}" />
<parm name="Proxy" value="new-corp:1118" />
<parm name="Override" value="" />
<parm name="Enable" value="1" />
<parm name="Type" value="0" />
<parm name="ReadOnly" value="0" />
<parm name="Username" value="" />
<parm name="Password" value="" />
<parm name="ExtraInfo" value="" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I get a SystemException in
Code:
Microsoft.WindowsMobile.Configuration.ConfigurationManager.MainConfigurator(XmlDocument configDoc, UInt32 flags)
containing an error code of 2147500037.
The registry isn't changed, connecting to the private corporate network still doesn't work.
I don't know what I'm doing wrong. Is something wrong with my xml code?
Help would be really appreciated!
Regards
Christian Nitschkowski
At the first glance it seems to me you forgot to declare the parameters' datatype as it's demonstrated with this this sample
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKCU\Software\test\testtest">
<parm name="TestValueInteger" value="5" [COLOR="Red"]datatype[/COLOR]="integer" />
<parm name="TestValueBoolean" value="1" [COLOR="Red"]datatype[/COLOR]="boolean" />
<parm name="TestValueString" value="testtesttest" [COLOR="Red"]datatype[/COLOR]="string" />
<!-- multi strings are delimited with -->
<!-- multi strings are terminated with -->
<parm name="TestValueString2" value="string1string2string3" [COLOR="Red"]datatype[/COLOR]="multiplestring" />
<!-- date / time combined to ONE single value -->
<parm name="TestValueDateTime1" value="10/20/01 8:15:04 pm" [COLOR="Red"]datatype[/COLOR]="date" />
<parm name="TestValueDateTime2" value="10/20/01 3:55:04 pm" [COLOR="Red"]datatype[/COLOR]="time" />
<parm name="TestValueBinary" value="5iAGkAbgBhAHIAeQAgAGIAbABvAG" [COLOR="Red"]datatype[/COLOR]="binary" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
Instructions
1. First force stop Dead Trigger 2 App in Application settings
2. UNZIP and Just push the attached file to /data/data/com.madfingergames.deadtrigger2/shared_prefs/
3. Done! Enjoy! :laugh:
The Manually method(Reccomended)
1. Force Stop Dead Trigger 2 in settings.
2. Just open up the shared_prefs folder and find the com.madfingergames.deadtrigger2.xml.
3. Next change makes this code the same as this. Just change one value.
Change
Code:
< int name=”UnityGraphicsQuality” value=”[COLOR="Red"][B]3[/B][/COLOR]″ / >
Change
Code:
< int name=”OptionsGraphicDetail” value=”[B][COLOR="Red"]3[/COLOR][/B]″ / >.
4. Save and relaunch, now you have Tegra Graphics for your Non-Tegra Device
You may experience frame drops at times but that's to be expected. These graphics are intense. But, S800 handles it very well!
Works on any device, must be rooted
Thank you, works great on my N9005
What isthe meaning of 0440?
I can enable 044 doing read group and others, but 0440 can't with any combination.
kersh said:
What isthe meaning of 0440?
I can enable 044 doing read group and others, but 0440 can't with any combination.
Click to expand...
Click to collapse
The 0 to the far left is Used to set setuid, setgid, or sticky bit, you may not see it in your file browser but 0440 or 440 is okay
As long as the permission looks like the photo your good.
Sent from my SM-N900T using Tapatalk 2
Going to add a link to this in the Sprint thread as well. Thanks again!
nolimit06 said:
Going to add a link to this in the Sprint thread as well. Thanks again!
Click to expand...
Click to collapse
Alright, you and anyone else are more than welcome to.
Sent from my SM-N900T using Tapatalk 2
lm that guy said:
1. First force stop Dead Trigger 2 App in Application settings
2. UNZIP and Just push the attached file to /data/data/com.madfingergames.deadtrigger2/shared_prefs/
3. Then change permission to 440
4. Done! Enjoy! :laugh:
You will experience a tad bit of frame drops at times but that's to be expected since the graphics were optimized for only Tegra 4. BUT, S800 handles it very well!
Works on any device, must be rooted
Click to expand...
Click to collapse
Do you see ultra high in settings? I see only low and high even after mod
Sent from my Nexus 7 using Tapatalk
gautampw said:
Do you see ultra high in settings? I see only low and high even after mod
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
That's just how it is but max graphics are enabled. Just make sure you don't touch those or you will have to reapply the mod.
Sent from my SM-N900T using Tapatalk 2
DEAD TRIGGER 2 Ultra High Graphics
Google "DEAD TRIGGER 2 [Ultra High Graphics] v0.02.1 APK" for Ultra High Graphics on any device
No root required!
I love
that a 3kb file was compressed into a 1kb zip!
I know this is a noob question but how do you change the permissions please?
Smash41 said:
I know this is a noob question but how do you change the permissions please?
Click to expand...
Click to collapse
Download Root explorer. inside root explorer tap on the file you want to change the permissions you will see list of options>>>> select permissions. then you will know what to do from there.
---------- Post added at 03:12 PM ---------- Previous post was at 03:01 PM ----------
please how would my Motorola droid Razr XT912 handle this game on ultra high settings. I play dead trigger1 on ultra with mod. its plays at 30fps-40fps it can dip low to 19fps in a twinkle of an eye. and rerurns back to 30fps. overall gameplay is smooth but i want to know how dead trigger2 will perform. on my razr
infinitycane said:
Download Root explorer. inside root explorer tap on the file you want to change the permissions you will see list of options>>>> select permissions. then you will know what to do from there.
---------- Post added at 03:12 PM ---------- Previous post was at 03:01 PM ----------
please how would my Motorola droid Razr XT912 handle this game on ultra high settings. I play dead trigger1 on ultra with mod. its plays at 30fps-40fps it can dip low to 19fps in a twinkle of an eye. and rerurns back to 30fps. overall gameplay is smooth but i want to know how dead trigger2 will perform. on my razr
Click to expand...
Click to collapse
You might be in for a lag fest If your rooted you can try and revert back easily by changing the in app graphic settings.
Sent from my SM-N900T using Tapatalk 2
Cool nice thread lets see how my tegra 3 handles it
Thanks
Sent from my HTC One X using Tapatalk 2
works well on my nexus 4, thanks !
That made difference
Thanks
peteyboy24 said:
works well on my nexus 4, thanks !
Click to expand...
Click to collapse
where did you find the permission in the text?
[ <?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<map>
<int name="OptionsMute" value="1" />
<float name="OptionsReloadButtonY" value="0.0" />
<float name="OptionsMusicVolume" value="1.0" />
<float name="OptionsSensitivity" value="0.7" />
<float name="OptionsGadgetButtonX4" value="0.0" />
<int name="OptionsInvertYAxis" value="0" />
<float name="OptionsWeaponButtonX" value="0.0" />
<float name="OptionsWeaponButtonY" value="0.0" />
<float name="OptionsReloadButtonX" value="0.0" />
<int name="UnityGraphicsQuality" value="3" />
<float name="OptionsGadgetButtonX3" value="0.0" />
<float name="OptionsAimButtonX" value="0.0" />
<float name="OptionsGadgetButtonX2" value="0.0" />
<float name="OptionsGadgetButtonX1" value="0.0" />
<float name="OptionsGadgetButtonX0" value="0.0" />
<int name="OptionsLeftHandControlsNeedUpdate" value="0" />
<float name="OptionsMoveStickY" value="0.0" />
<float name="OptionsMeleeButtonY" value="0.0" />
<float name="OptionsMeleeButtonX" value="0.0" />
<string name="PUNCloudBestRegion">US</string>
<int name="OptionsLeftHandAiming" value="0" />
<int name="ShowBlood" value="1" />
<int name="FirstRun" value="2" />
<float name="OptionsMoveStickX" value="0.0" />
<float name="OptionsSoundVolume" value="1.0" />
<int name="OptionsControlScheme" value="0" />
<float name="OptionsAimButtonY" value="0.0" />
<int name="OptionsLanguage" value="1" />
<int name="OptionsSubtitles" value="1" />
<int name="Screenmanager Is Fullscreen mode" value="0" />
<float name="OptionsPauseButtonX" value="0.0" />
<int name="Screenmanager Resolution Width" value="1920" />
<float name="OptionsPauseButtonY" value="0.0" />
<int name="OptionsGraphicDetail" value="2" />
<int name="OptionsControlStyle" value="1" />
<float name="OptionsFireButtonX" value="0.0" />
<float name="OptionsFireButtonY" value="0.0" />
<int name="Screenmanager Resolution Height" value="1080" />
<float name="OptionsGadgetButtonY0" value="0.0" />
<int name="Intro" value="1" />
<float name="OptionsGadgetButtonY2" value="0.0" />
<float name="OptionsGadgetButtonY1" value="0.0" />
<float name="OptionsGadgetButtonY4" value="0.0" />
<float name="OptionsGadgetButtonY3" value="0.0" />
</map>]
that was all what i get! so tell me please where is it? or where i should put the value in?
Sent from my Nexus 4 using xda app-developers app
nexuses said:
where did you find the permission in the text?
that was all what i get! so tell me please where is it? or where i should put the value in?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
change this line:
Code:
<int name="OptionsGraphicDetail" value="2" />
to this:
Code:
<int name="OptionsGraphicDetail" value="[B][COLOR="Red"]3[/COLOR][/B]" />
nexuses said:
where did you find the permission in the text?
[ <?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<map>
<int name="OptionsMute" value="1" />
<float name="OptionsReloadButtonY" value="0.0" />
<float name="OptionsMusicVolume" value="1.0" />
<float name="OptionsSensitivity" value="0.7" />
<float name="OptionsGadgetButtonX4" value="0.0" />
<int name="OptionsInvertYAxis" value="0" />
<float name="OptionsWeaponButtonX" value="0.0" />
<float name="OptionsWeaponButtonY" value="0.0" />
<float name="OptionsReloadButtonX" value="0.0" />
<int name="UnityGraphicsQuality" value="3" />
<float name="OptionsGadgetButtonX3" value="0.0" />
<float name="OptionsAimButtonX" value="0.0" />
<float name="OptionsGadgetButtonX2" value="0.0" />
<float name="OptionsGadgetButtonX1" value="0.0" />
<float name="OptionsGadgetButtonX0" value="0.0" />
<int name="OptionsLeftHandControlsNeedUpdate" value="0" />
<float name="OptionsMoveStickY" value="0.0" />
<float name="OptionsMeleeButtonY" value="0.0" />
<float name="OptionsMeleeButtonX" value="0.0" />
<string name="PUNCloudBestRegion">US</string>
<int name="OptionsLeftHandAiming" value="0" />
<int name="ShowBlood" value="1" />
<int name="FirstRun" value="2" />
<float name="OptionsMoveStickX" value="0.0" />
<float name="OptionsSoundVolume" value="1.0" />
<int name="OptionsControlScheme" value="0" />
<float name="OptionsAimButtonY" value="0.0" />
<int name="OptionsLanguage" value="1" />
<int name="OptionsSubtitles" value="1" />
<int name="Screenmanager Is Fullscreen mode" value="0" />
<float name="OptionsPauseButtonX" value="0.0" />
<int name="Screenmanager Resolution Width" value="1920" />
<float name="OptionsPauseButtonY" value="0.0" />
<int name="OptionsGraphicDetail" value="2" />
<int name="OptionsControlStyle" value="1" />
<float name="OptionsFireButtonX" value="0.0" />
<float name="OptionsFireButtonY" value="0.0" />
<int name="Screenmanager Resolution Height" value="1080" />
<float name="OptionsGadgetButtonY0" value="0.0" />
<int name="Intro" value="1" />
<float name="OptionsGadgetButtonY2" value="0.0" />
<float name="OptionsGadgetButtonY1" value="0.0" />
<float name="OptionsGadgetButtonY4" value="0.0" />
<float name="OptionsGadgetButtonY3" value="0.0" />
</map>]
that was all what i get! so tell me please where is it? or where i should put the value in?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
that's okay.. but this is the permissions which I saw.. and I don't know how to set them to that value!
Sent from my Nexus 4 using xda app-developers app
lm that guy said:
change this line:
Code:
<int name="OptionsGraphicDetail" value="2" />
to this:
Code:
<int name="OptionsGraphicDetail" value="[B][COLOR="Red"]3[/COLOR][/B]" />
Click to expand...
Click to collapse
I just tried it, there has been a observed improvement in the quality of graphics.. thanks
Sent from my Nexus 4 using xda app-developers app
hi,
I developed and HCE service in kitkat and I put in the manifest this -
<service
android:name="com.bimo.verifonewallet.service.MyHostApduService"
android:exported="true"
androidermission="android.permission.BIND_NFC_SERVICE" >
<intent-filter>
<action android:name="android.nfc.cardemulation.action.HOST_APDU_SERVICE" />
</intent-filter>
<meta-data
android:name="android.nfc.cardemulation.host_apdu_service"
android:resource="@xml/apduservice" />
</service>
when the phone has NFC field (in A technology) then the service is triggered and the func onCreate() is executed and after the transaction is finished the func onDestroy() is invoked.
therefore when I do startService() and stopService() it has no effect.
can I control if the service be invoked or not ?
thanks a lot,
Nir
im going crazy digging for the cause of my problems.first i love one plus .and its probably not there fault.. everything is being hacked ..spied on.so im find interesting things as i dig .and i apologize im in a hurry im at work...let me know<?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<p att="wns.heartbeat" />
<p att="agoo_action_heart" />
<p att="agoo_action_re_connect" />
<p att="com.xiaomi.push.PING_TIMER" />
<p att="com.netease.pushservice.core.PushLMessageService_V2" />
<p att="com.sina.heartbeat.action.1004" />
<p att="com.sohu.push.action.HEARTBEAT_WAKEUP" />
<p att="com.sohu.push.action.HEARTBEAT" />
<p att="com.youku.pushsdk.pushservice.ALARM_TICK" />
<p att="action_keep_alive_after_send_end" />
<p att="com.eg.android.AlipayGphone.push.action.AMNET_ALARMTIMER" />
<p att="ctrip.android.viewushsdk.action.response_timeout" />
<p att="com.baidu.android.push.intent.KEEP_ALIVE" />
<p att="AlarmTaskSchedule.com.sdu.didi.psnger" />
<p att="com.taobao.accs.intent.action.COMMAND" />
<p att="alarm.push.timer.action" />
<p att="push_heart_beat" />
<p att="anetwork.channel.intent.action.COMMAND" />
<p att="com.dianping.push.KEEP_ALIVE" />
<p att="com.baidu.news.action.heartbeart" />
<p att="com.android.eguan.drivermonitor" />
<p att="com.jingdong.jdpush.msgcenter.action" />
<p att="com.tencent.android.tpush.service.channel.heartbeatIntent" />
<p att="com.xunlei.xlkdemo.timer.action_" />
<p att="com.xunlei.acc.sdk.vip.keepLiveTimerAlarm.40.1471910163480" />
<p att="com.tencent.mtt.service.ACTION_HEARTBEAT" />
<p att="com.android.coll" />
<p att="com.skynet.push.message.send.return" />
<p att="ctrip.android.viewushsdk.action.reconnect" />
<p att="ctrip.android.pushsdk.heartbeat" />
<p att="com.eg.android.AlipayGphone.push.action.CHECK" />
<p att="com.dianping.push.RECONNECT" />
<p att="com.sankuai.mtmp.keepalive.send" />
<p att="iQiyiPushService.SCHEDULE_CONNECT" />
<p att="com.taobao.taobao.intent.action.COCKROACH" />
<p att="action_ping" />
<p att="com.ifeng.news2.action.HEART_BEAT" />
<p att="netease.pomelo.push.dl.new.messageservice_V1" />
<p att="com.baidu.news.action.push_start" />
<p att="com.roger.alarm" />
<p att="com.baidu.kspush.homework.action.check_service" />
<p att="com.youku.pushsdk.pushservice.ALARM_DATA_COLLECT" />
<p att="com.gieseckedevrient.android.intent.PING.com.cmbchina.ccd.pluto.cmbActivity" />
<p att="io.rong.push.intent.action.HEART_BEAT" />
thetes a couple of strings there youll find it
theres slot more ill post later
Ouch.. Someone explain I do hope this is not true.
sorry im still working...and theres a possibility it might not be pre installed..but if you all recall the time i posted about all builds from factory had malware spyware pre installed...and few months later they finally announced that there were pre installed malware and spyware ...its just how everything is these days .every app you name it .i spend hours upon hours a week digging and looking.. weird hobby i know ....ill try to post the rest when i get off
by the way if you are as crazy about whats coming or going .the a really bad ass app from the market ..?.? connects..?? download and watch
borisbwhacking said:
by the way if you are as crazy about whats coming or going .the a really bad ass app from the market ..?.? connects..?? download and watch
Click to expand...
Click to collapse
There are alot of things that raise many questions like this
att="com.xiaomi.push.PING_TIMER
This is completely different OEM all together.
This is another reason why I will personally never trust/use their stock software
zelendel said:
There are alot of things that raise many questions like this
att="com.xiaomi.push.PING_TIMER
This is completely different OEM all together.
This is another reason why I will personally never trust/use their stock software
Click to expand...
Click to collapse
yes your right .it came through ota...im finding major issues keylogger snapshots .theres alot ...ive been watching every connection i can and trace it back..its a weird hobby i know.but if there peeping at me .then uts my turn to watch them.lol
i flashed kali over it after i found these .i have it on all my devices.kali that is .. everything has a virus or spyware.its almost you can't avoid it anymore
well then, since you like this stuff, i encourage you brother to release a debloater script :good:
So good of you to post about spyware without any proof or technical details whatsoever. This is so helpful to everyone.
P.S. I recently found that OnePlus comes pre-installed with system app which can be triggered to wait for the user to grab their phone (uses accelerometers, prox sensor and generic facial recognition) and then overloads the battery to explode the phone. Holy **** did you know this?!!!!111 I am at work right now so I can't post details but I definitely, definitely will later!
This thread is bad and you should feel bad.
Keep hacking the Gibson champ.
look what i found...https://www.engadget.com/2017/10/11/oneplus-oxygenos-data-anonymity/
Darkje said:
Ouch.. Someone explain I do hope this is not true.
Click to expand...
Click to collapse
its true look here https://www.engadget.com/2017/10/11/oneplus-oxygenos-data-anonymity/.im very disappointed in them ..and im not crazy...
borisbwhacking said:
its true look here https://www.engadget.com/2017/10/11/oneplus-oxygenos-data-anonymity/.im very disappointed in them ..and im not crazy...
Click to expand...
Click to collapse
That's not malware.
Puddi_Puddin said:
That's not malware.
Click to expand...
Click to collapse
That depends on your definition of it. Something like this without disclosure upfront can be see as Malware depending on security requirements.
It seems the Notification activity name of Chinese App…As we know,the GCM(Google Cloud Message) push service is not available in China.So many of Chinese App have their own push service.Like the xiaomi.push,is a push service which maintained by Xiaomi, used by many Chinese Apps.
delude101 said:
Keep hacking the Gibson champ.
Click to expand...
Click to collapse
ahh we have a smart ass in the crowd ..theres always one if not several.hiding behind the screen talking **** .its the only place you can hide and be talking ****...