Develop Bugs

Dead SPV M5000

Hi,
You may have heard this problem many times, I tried to upgrade my ROM and it failed a few seconds in because for some insane reason the phone rebooted during the upgrade, It now says USB on the top and v1.00, Tried hard reset but does not work, I have also tried to reflash the rom but I am using MS vista that uses an alternative to Activesync, so the upgrade says 202 connection error, Please can anyone help me!!!!

wgriffiths said:
Hi,
You may have heard this problem many times, I tried to upgrade my ROM and it failed a few seconds in because for some insane reason the phone rebooted during the upgrade, It now says USB on the top and v1.00, Tried hard reset but does not work, I have also tried to reflash the rom but I am using MS vista that uses an alternative to Activesync, so the upgrade says 202 connection error, Please can anyone help me!!!!
Click to expand...
Click to collapse
you need to downgrade your drivers... there's a way of doing it, but I've never done it myself, so you'll need to find someone else who has.

Olipro said:
you need to downgrade your drivers... there's a way of doing it, but I've never done it myself, so you'll need to find someone else who has.
Click to expand...
Click to collapse
Activesync wont install on Vista, which to be honest would probably work fine it is stupid M$ prohibiting it to install,
The computer will detect the phone, it says Microsoft USB Sync, does it need to be a ceartain driver for this to work?

Really need help on this! Computer recognises PDA says Microsoft USB Sync, What is the correct driver, the updater is not recognising the phone

Please anyone if you have even a small idea please post it!!! PLEASE!

wgriffiths said:
Please anyone if you have even a small idea please post it!!! PLEASE!
Click to expand...
Click to collapse
Yeah, sorry it took a while, for some reason this thread only popped up as new today???? strange...
For your problems... uninstall ActiveSync... reduntant in Vista, there the new WMDC (I take it you realise this?). After uninstall, connect your device and it will install WMDC with the appropriate updates, then you have to check this thread here....
http://forum.xda-developers.com/showthread.php?t=291723.
That thread may be dated and there may be a newer one, but there were many people using it successfully and I was one of them until I downgraded again to XP. Hope it helps.
BTW, Vista sucks A$$, it's just not ready for driver and program release, and if you get an independant memory and CPU monitor, it'll show you that the built in one lies through it's teath!!! But hey, each to it's own. Regards.

plz tell me dear how we connect in a dead stage

Other option would be to flash the ROM using a machine with XP, wich I find more easy than in vista
Hope it helps,

When I tried it in Vista I had a similar problem, I tried it on an XP machine no problems, am using Win7 now but dont know if upgrading the ROM will work yet, a bit risky.

Unroot help

Ok .. I've seen alot of unrooting on forums but none explain HOW to unroot after using the 3 click simple root prg. ..and by the way my computer doNT recognize my phone when in sync mode..
Thanks
Sent from my PC36100 using XDA App

all of them say download the RUU (i dont know the link off hand) and run it. thats all you need to do. if you have problems, come back and we'll figure them out

Yea ive tried.. But htc sync prg.. Doesnt detect my phone.. I get a message.. That says htcsync is not found in computer.. (but, prg is fully installed) and also i get something about adb device drive installation window.. ( sorry im a newbie to all this rooting & them weird roms thingy)
thanks again

chinoapple said:
Yea ive tried.. But htc sync prg.. Doesnt detect my phone.. I get a message.. That says htcsync is not found in computer.. (but, prg is fully installed) and also i get something about adb device drive installation window.. ( sorry im a newbie to all this rooting & them weird roms thingy)
thanks again
Click to expand...
Click to collapse
Install the drivers, you need them to recognize your phone.

[Q] driver install problem

im new to the Gnex and im trying to install the device drivers and i cant seam to figure it out. i have installed the toolkit and tried to intall the drivers through there, no luck. i have also downloaded the drivers from the samsung website and tried manually installing them and no luck either. i also tried the PDAnet method and i encountered an error and the install aborts it self. i did have an Epic4gtouch before im thinking those drivers are causing some sort of problem i think. i read and watched the instructions on how to do things but i just cant seam to get it to work. if someone can point me in the right direction, that would be much appreciated. :good: also im not so sure what other info to provide here for someone to better assist me. im doing this through my PC that is running Windows 8 and its a sprint galaxy nexus running 4.1.1, build JRO03U.L700FH05 , UNLOCKED

[Q] Help!! Firmware gone and PC doesnt recognize my M9!!

I installed recovery to root my HTC One M9 yesterday. It seemed like I made some mistakes and now my firmware is totally gone and my computer doesn't recognize my phone anymore. However I still have access to recovery and I want to know if installing a Rom via SD-card is possible or not. If not, what should I do? Any help will be very appreciated. Thanks!!!

What recovery do you have access to? If it's twrp then yes you can load from sd card.. Have you tried an RUU for your phone? That should work as well.

enchanter100 said:
What recovery do you have access to? If it's twrp then yes you can load from sd card.. Have you tried an RUU for your phone? That should work as well.
Click to expand...
Click to collapse
Hello! Recovery I installed was PhilZ Touch CWM. I'm trying right now! Thanks.

Hi .. I think I made things confused a bit. What I meant by SD-card was external micro SD-card. Thanks!

Not sure what you mean by firmware. This is what you need to do:
Install the latest version of adb. Go to recovery, turn on sideload mode.
in cmd prompt-> adb sideload *location/name of rom.zip* e.g. c:\users\xxx\rom.zip
Restart and bam you are done

MadScientist2015 said:
I installed recovery to root my HTC One M9 yesterday. It seemed like I made some mistakes and now my firmware is totally gone and my computer doesn't recognize my phone anymore. However I still have access to recovery and I want to know if installing a Rom via SD-card is possible or not. If not, what should I do? Any help will be very appreciated. Thanks!!!
Click to expand...
Click to collapse
Does the computer recognize the phone in bootloader/fastboot/download mode? If you can enter recovery and download mode, then your phone is probably working fine (except for not having a working ROM) and your computer should see your phone on some level.
Are you using WIndows? I think you might need to get your device drivers on your computer working. Check Device Manager if you're in windows. With your phone connected, you should have 2 devices. One should be under a section called Android USB Devices (might be called My HTC) and the other is going to be under Portable Devices section (might be called HC One M9). If you don't have both, then you need to work on your driver issue on your computer.
Edit: Sorry if this is blunt, but since you seem to not really know some very basic terminology, i recommend that you do a LOT of reading on this forum so you can have a better understanding of what's going on with your device and how to solve your problem. I know you might feel like youre in panic-mode because your device won't boot, but you're going to get into more trouble if you just start trying a bunch of "solutions" without having any understanding of what you're doing. I know, because I've been there before.
Edit2: Also, it would help to steer you in the correct direction if you listed your location and carrier info

MadScientist2015 said:
Hello! Recovery I installed was PhilZ Touch CWM. I'm trying right now! Thanks.
Click to expand...
Click to collapse
FIRST THING, install TWRP 2.8.6.4, you can find it on captian_throwbacks thread here,

Aldo101t said:
FIRST THING, install TWRP 2.8.6.4, you can find it on captian_throwbacks thread here,
Click to expand...
Click to collapse
Actually, the beta version 2.8.6.4 is not recommendet anymore. Captian_Throwback now recommends using the official version 2.8.6.1. (Sidenote: The version number of the official one is lower because the numbering of the beta version is unofficial.)

MTP Problem

Hi all
I really need some help, for some time i have been trying to solve the MTP driver fail issue on my PC with win 7, tried everything but no go, now i have found out that the MTP (app) got killed on my Phone (not running in the background) so please tell me how to activate that again, i really hope that somebody is able to help me since i´m total lost on this and i really need to get it working again, Many Thanks
My Phone : GT-I9195 KK 4.4.2 I9195XXUCOC2

nibb-1 said:
Hi all
I really need some help, for some time i have been trying to solve the MTP driver fail issue on my PC with win 7, tried everything but no go, now i have found out that the MTP (app) got killed on my Phone (not running in the background) so please tell me how to activate that again, i really hope that somebody is able to help me since i´m total lost on this and i really need to get it working again, Many Thanks
My Phone : GT-I9195 KK 4.4.2 I9195XXUCOC2
Click to expand...
Click to collapse
Have you tried flashing stock firmware COC2 with Odin over your current installation with just a CACHE wipe before hand? Are your driver's working correctly on your windows 7? Try the Samsung driver's listed here on xda.

yes i´m very sure that my drivers are working correct, also i have not yet flashed my stock firmware, because i thought i could get the MPT app on my phone running again without flashing the firmware, Many Thanks
PS : I think it is ES Task manager that have killed the mtp app from running in the background on my phone