I just got this phone for my girlfriend, i got it rooted using odin and and then used odin to upgrade to fb17. its cool and all but as you probably know has graphical issues with the notification bar and so forth. i cant get odin to flash anything over this...
i get this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping.
and it sits forever... any ideas.
Related
Hi there,Im not sure is this the right place to post but I dunno where.Em,i wanna upgrade my sgs to 2.2 from 2.1 asia version.But when I flash with Odin it says
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> Enter CS for MD5..
<ID:0/008> Check MD5.. Do not unplug the cable..
<ID:0/008> Please wait..
<ID:0/008> Checking MD5 finished Sucessfully..
<ID:0/008> Leave CS..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone tell me what is the problem with my sgs?
So i soft bricked my phone recently trying to get the latest CWM. I got the stock firmware for Bell, my carrier through Samfirmware and opened Odin 3.07 to flash it onto my phone. Everything is normal but when I click start all i get is this...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
and its stuck there. Any ideas how i can fix this?
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
coolmob1 said:
I have a samsung galaxy note 2 since last 2 years. Have been using Cyanogenmod with philz touch recovery from last year without any issue.
Yesterday i put my phone on charging at night as usual and when i woke up in the morning the phone was off. I tried to switch it on but it gets stuck on Samsung Galaxy note 2 logo. Tried to enter recovery but it takes me into stock recovery and into download mode. Cannot access Philz recovery. Tried flashing recovery again from odin but get this error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
tried again on a different usb port then got this
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
How do i fix this issue?? Any help would be really appreciated......
Click to expand...
Click to collapse
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
nitol said:
first flash the stock recovery of your current android version, then it should reboot. after that flash custom one.
Click to expand...
Click to collapse
Tried this, dsnt fix anything. Same error as before.
Today morning i tried booting the phone again and it wont boot only.... no light, no display, just plain dead. i tried changing the battery with one of my friends still nothing. Took it to a repair shop and he tried changing the main board but the screen still wont show anything. He says its looks like both the board and the screen circuitry are gone.
I cant understand how can both the screen and the main board blow off together!
hallo guys,
i tried to change my region to Country Panama from this link
but i get this
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P600UBUCOB1_P600UUBCOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
i tried this pit from this thread
but did't work for me, anyone know why?
my tab information
SM-p600 32gb
android 4.2.2
build: KOT49H.p600XXUCNH3 PHN
no root, everything stock!!
Using Unofficial LineageOS 14.1 (v2awifi). During using my Tab Pro 12.2 SM-T900 I got a failure and switched off my tablet. Since that time I can't start my tablet. Can only turn on my tablet in downloadmode. Can't enter recovery. Tried to flash TWRP, but that is not possible. Because the failure was suddenly, I could not and can't switch and change usb-debugging and media-transfer possiblities.
I tried to install Stock Rom with Odin, got the next faillures:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
And sometimes:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
So I can't flash the stock rom for repairing my ROM. Please help me, so that I can use my tablet again. How to fix PIT-partion ?
I have the same problem. Any resolution?
Same but on an SM-T320. Flashed an appropriate PIT, stock firmware...nothing working. I'm thinking it's a physical issue at this point.