my computer won't recognize the kindle fire in adb. I have the kf rooted. have firefirefire installed. after firefirefire was installed is when I lost adb. I have tried reinstalling the drivers numerous times to no avail. Any suggestions?
I have deleted all previous sdk, usb drivers or anything android related from computer to start from scatch. I did a factory reset on the kf. I currently have KFU v0.9.3 setup from instructions i followed on a youtube video titled (How to Root - Kindle Fire 6.2.2 BurritoRoot3) by Nat3Mil. sorry I would post a link but apparently I can't until I have 8 posts.
kf v6.2.2
win7
thanks
maybe this helps:
http://forum.xda-developers.com/showpost.php?p=22342376&postcount=6
and check "adb_usb.ini" in the ".android" folder in your personal folder
it should include 0x1949 - i use to add 0x18d1 also in a new line
Sound like your Fire is in Fastboot. This happened to me last week. If you are able to load the drivers in manually, then you should be able to use the following commands:
adb shell su -c "idme bootmode 4000"
adb reboot
b63 said:
maybe this helps:
http://forum.xda-developers.com/showpost.php?p=22342376&postcount=6
and check "adb_usb.ini" in the ".android" folder in your personal folder
it should include 0x1949 - i use to add 0x18d1 also in a new line
Click to expand...
Click to collapse
I have followed those steps in the link before and did it again but no difference. I don't have the adb_usb.ini file or the .android folder. only "Kindle ADB" and "kfu" folders both on the root of the c drive.
vwpower44 said:
Sound like your Fire is in Fastboot. This happened to me last week. If you are able to load the drivers in manually, then you should be able to use the following commands:
adb shell su -c "idme bootmode 4000"
adb reboot
Click to expand...
Click to collapse
load the drivers manually and it acts like everything is good but adb still won't recognize the kindle under adb devices
zachjen said:
I have followed those steps in the link before and did it again but no difference. I don't have the adb_usb.ini file or the .android folder. only "Kindle ADB" and "kfu" folders both on the root of the c drive.
Click to expand...
Click to collapse
without the .android folder in your personal folder and the correct adb_usb.ini adb will never work !
create the .android folder and copy the file from c:\kfu\drivers\kindle to the .android folder
Thank you a million times! All is well again.
I had that folder and usb file before when it couldn't be recognized and forgot to put them back I guess.
glad to help ...
please mark the subject of the topic (edit first post) with [Solved]
b63 said:
glad to help ...
please mark the subject of the topic (edit first post) with [Solved]
Click to expand...
Click to collapse
I can't get this to work.
I've been trying to root/install jb on my kindle fire hd I bought today. I downlaoded the android sdk, installed the proper pacakges. Ran cmd and did "adb devices" no devices found. Enabled ADB on kindle fire, no devices found still. I've now downloaded the kfu and copied the file over just like you said (as well as installed the driver) and still to no avail.
I'm running Win7 64bit.
Any ideas?!?
You might be able to root the hd but the 1st gen. methods will not work and you will not be installing jelly bean at this point it`s not even possible. The hd forum can be found here http://forum.xda-developers.com/forumdisplay.php?f=1782
Related
For 6.3 see http://forum.xda-developers.com/showthread.php?p=24129239
Please do not reupload/redistribute BurritoRoot2/BurritoRoot3, instead link directly to my hosting. I own the server, it will no go away any time soon. This allows me to update it if a bug is found.
BurritoRoot3 is not opensource, it is free, but it is not free to distribute. Please do not redistribute it.
Tested on 6.2, 6.2.1 and 6.2.2
Disclaimer:
BurritoRoot3 may void your warranty. While it was tested, over and over, a chance of data loss or hardware damage always exists. If something bad happens due to your use of BurritoRoot3, well it is your fault not our's, don't blame any of us.
Wine/Coffee/Device Funding:
To donate to jcase of TeamAndIRC for BurritoRoot go here:
http://forum.xda-developers.com/donatetome.php?u=2376614
To donate to pokey900 for the FireFireFire Bootloader go here:
http://forum.xda-developers.com/donatetome.php?u=466725
Download:
http://download.cunninglogic.com/BurritoRoot3.apk
BurritoRoot3 is an all in one package, to root and install the custom bootlaoder, FireFireFire, onto the KindleFire.
Instructions are pretty plain and simple, however you will have to get adb working on your own (if you have written, or know of adb guides for the Kindle Fire please PM me to list them here).
ADB GUIDES
MAC GUIDE: http://forum.xda-developers.com/showthread.php?t=1443071
WINDOWS GUIDE: http://www.jayceooi.com/2011/12/13/how-to-install-kindle-fire-adb-usb-driver/
LINUX GUIDE: http://forum.xda-developers.com/showthread.php?p=22067293
What it does:
Gains root, installs superuser, installs su and installs the FireFireFire bootloader.
At this time, we do not have permission to distribute any recovery, once one is available for our use, we will add auto flashing of recovery.
How to use:
adb shell chmod 777 /data/local/tmp
Run app, follow directions given by the app.
Usage example :
[email protected]:~$ adb shell chmod 777 /data/local/tmp <---- This one is important, it may not create BurritoRoot3.bin if this is not done
[email protected]:~$ adb install BurritoRoot3.apk
4897 KB/s (1151520 bytes in 0.229s)
pkg: /data/local/tmp/BurritoRoot3.apk
Success
<go open the app now>
[email protected]:~$ adb shell /data/local/tmp/BurritoRoot3.bin --root
BurritoRoot3 Installer 0.1 by TeamAndIRC
#########################################################################
Usage: BurritoRoot3.bin <parameter>
--root - Restart adbD as root, and install Superuser app
--install - Install su
#########################################################################
Gaining root...
Installing Superuser APP, if it erros as already exists, please ignore the error.
pkg: /data/data/net.andirc.burritoroot3/bin/Superuser.apk
Success
Restarting adbD as root...
Please run adb shell /data/local/tmp/BurritoRoot3.bin --install
[email protected]:~$ adb shell /data/local/tmp/BurritoRoot3.bin --install
BurritoRoot3 Installer 0.1 by TeamAndIRC
#########################################################################
Usage: BurritoRoot3.bin <parameter>
--root - Restart adbD as root, and install Superuser app
--install - Install su
#########################################################################
BurritoRoot3 kroot 0.1 - TeamAndIRC
Remounting /system...
Cleaning up, ignore any errors
rm failed for /system/xbin/su, No such file or directory
rm failed for /system/bin/su, No such file or directory
Installing su...
Remounting /system..
Root installed
Starting: Intent { act=android.intent.action.MAIN cmp=net.andirc.burritoroot3/.FireFireFire }
Please check your Kindle's screen
[email protected]:~$
If you already have root, and want to safely install the FireFireFire bootloader, you can use the app, just install, open/close the app then
adb shell am start -a android.intent.action.MAIN -n net.andirc.burritoroot3/net.andirc.burritoroot3.FireFireFire
To install the CWR recovery by DoomLord after gaining root:
Download it, and push it to your Kindle
adb push <filename> /data/local/recovery.img
adb shell dd if=/data/local/recovery.img of=/dev/block/platform/mmci-omap-hs.1/by-name/recovery
Would you support the archos G9 devices
jutley said:
Would you support the archos G9 devices
Click to expand...
Click to collapse
Doesn't archos sign or lock system?
I love you Devs so much. I just got a Kindle today, but as I watched the video your Kindle shows up under Other Devices as if it didn't install the device driver. Mine is installed under portable devices. Can I just update that one or is there a debug mode for the Kindle that I'm missing?
Thanks for all you do!
---------- Post added at 10:06 AM ---------- Previous post was at 09:55 AM ----------
CharlieBoy808 said:
I love you Devs so much. I just got a Kindle today, but as I watched the video your Kindle shows up under Other Devices as if it didn't install the device driver. Mine is installed under portable devices. Can I just update that one or is there a debug mode for the Kindle that I'm missing?
Thanks for all you do!
Click to expand...
Click to collapse
LoL Nevermind I think I know why mine isn't there... I've already installed ADB from before. I shall continue on and see what happens :-D
I'm currently running Ubuntu 11.10(Without access to a windows computer to do so.) And after following the steps within the BurritoRoot I get error: insufficient permissions for device when entering adb root. I've rebooted my kindle and laptop as well as changed usb ports.
I've set it up so that it's acknowledged within /.android. Am I perhaps missing something sdk wise? The usb configuration install for extras within it says Linux isn't compatible. But any insight into this would be appreciated I'm not new to Android or adb for that matter. Things seem to be done differently for the Kindle is all.
Thanks guys.
AproSamurai said:
I'm currently running Ubuntu 11.10(Without access to a windows computer to do so.) And after following the steps within the BurritoRoot I get error: insufficient permissions for device when entering adb root. I've rebooted my kindle and laptop as well as changed usb ports.
I've set it up so that it's acknowledged within /.android. Am I perhaps missing something sdk wise? The usb configuration install for extras within it says Linux isn't compatible. But any insight into this would be appreciated I'm not new to Android or adb for that matter. Things seem to be done differently for the Kindle is all.
Thanks guys.
Click to expand...
Click to collapse
adb kill-server
sudo -s
adb devices
should see it now
Quit following me around jcase
Unheard said:
Quit following me around jcase
Click to expand...
Click to collapse
Hah Where you been?
I can not get ADB to recognize the device for the life of me.
I know I have the drivers installed the Fire is recognized as "android composite adb interface" under the Android Phone category in Device manager. But I can not get adb to see it.
"Adb kill-server"
"adb devices"
and it shows no devices attached. Ive done a factory reset on the tablet just to see (knowing it wouldn't make a difference)
Im running Windows XP
if someone could help me out.
notsointeresting said:
I can not get ADB to recognize the device for the life of me.
I know I have the drivers installed the Fire is recognized as "android composite adb interface" under the Android Phone category in Device manager. But I can not get adb to see it.
"Adb kill-server"
"adb devices"
and it shows no devices attached. Ive done a factory reset on the tablet just to see (knowing it wouldn't make a difference)
Im running Windows XP
if someone could help me out.
Click to expand...
Click to collapse
I'm sure its related to windows' drivers but I have no clue. Sorry
jcase said:
adb kill-server
sudo -s
adb devices
should see it now
Click to expand...
Click to collapse
Thanks man, I knew I must have failed to do something. It's much appreciated.
Dis this last night and it worked fine. Thanks!
I did have a few minor stumbles though. It seems the newest version of the software changed the name of the superuser app but the guide still uses the old name in the install command. Once I realized this I just changed the name in the command and it went right in.
Also for some reason I couldn't select the text in the adb box on the web page so I had to enter the commands by hand. No big deal but I would have felt more secure if the commands were in simple text so I could have copy/paste them in.
Like I said though everything worked and I have the market installed now. Thanks for the hard work!
I'm having some trouble with mine...I am trying to follow the video instructions to the link but it shows downloading a .android folder and extracting it to my user name on desktop but there is no such link. I have downloaded SDK and installed google usb drivers as well. I have 6.2.1 firmware and downloaded kindleroot_androidpolice.apk and placed on my kindle and I also downloaded superuser-2. I am not able to install the driver to the fire either. I go to my computer, manage, device manager, kindle, update driver software, browse my computer, etc. I have no INF file to choose under my .android folder.
Any help would be appreciated
My sd card is showing up as unmounted and not sure how to remount it. I sent adb remount and it didn't work. Any help would be appreciated.
Fee454 said:
I'm having some trouble with mine...I am trying to follow the video instructions to the link but it shows downloading a .android folder and extracting it to my user name on desktop but there is no such link. I have downloaded SDK and installed google usb drivers as well. I have 6.2.1 firmware and downloaded kindleroot_androidpolice.apk and placed on my kindle and I also downloaded superuser-2. I am not able to install the driver to the fire either. I go to my computer, manage, device manager, kindle, update driver software, browse my computer, etc. I have no INF file to choose under my .android folder.
Any help would be appreciated
Click to expand...
Click to collapse
would suggest to use this:
http://forum.xda-developers.com/showthread.php?t=1399889
[/COLOR]
b63 said:
would suggest to use this:
http://forum.xda-developers.com/showthread.php?t=1399889
Click to expand...
Click to collapse
This tool will attempt to install the correct Drivers for the Kindle Fire.
It will also perform the setup required for adb_usb.ini in .android for you.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Press any key to continue . . .
I tried to install the drivers for the kindle but i receive the above message
---------- Post added at 09:56 PM ---------- Previous post was at 09:07 PM ----------
My issue is it cannot find my device...where can I find the kindleADB.zip I keep hearing about?
did you do install_drivers.bat first ?
take a look:
http://forum.xda-developers.com/showpost.php?p=20698002&postcount=283
that should correct the path issue
You should get the same files from the android Sdi. Good luck.
Jcase, I know that you said the unroot button did not work, but is there a method of unrooting?
b63 said:
did you do install_drivers.bat first ?
take a look:
http://forum.xda-developers.com/showpost.php?p=20698002&postcount=283
that should correct the path issue
Click to expand...
Click to collapse
Yes thank you. Moving it to the same as the run.bat seemed to have worked as it shows online now when running the Kindle Fire Utility. I switched it to fast boot but now seems to have been frozen at the kindle fire logo for quite some time now. I heard you have to switch to fastbook to install TWRP first before rooting?
I am not sure if I should attempt to somehow reboot this as it seems to be stuck at the boot up screen
wrong - switch back to normal boot and use the utility
Hi guys! I'm new to the forum but not new to the IT world and not new to Linux or Android devices.
I'm stuck at the Kindle Fire screen after a failed attempt to root the device. Here's what I did. I'm hoping somebody can please help me. I did lots of Google searches to try to solve my issue and I can't seem to find the right solution.
So here's the background. I tried to root my KF by using this process http://www.pcworld.com/article/244303/how_to_root_your_kindle_fire.html on an Windows 7 VM. Then I found that SuperOneClick didn't work for KF6.3. So then I tried to KF Utility v.0.9.5 http://forum.xda-developers.com/showthread.php?t=1399889
I selected the option to root the KF. After it went through the process and I got the Kindle Fire screen (which is sounds like the KF is in the fastboot process) I couldn't get anything to work at that point. I couldn't get the VM to even see the KF nor Ubuntu (which is the main OS of that laptop). So then I figured I bricked the device. So I followed these instructions http://www.androidauthority.com/how-to-unbrick-your-amazon-kindle-fire-46412/ but that won't work ecause the KF isn't being recognized by the OS. SO at that point, I couldn't get anything to work. So I rebooted the laptop (which is running Ubuntu 12) and the KF booted back up and it fired back up.
If I power off the KF and turn it back on, it gets stuck at the KF bootup screen.
So at that point I decided to throw Windows 7 on a different laptop that I have and see if I can get it to work. So I installed java & Android ADK for my OS (Windows 7). I installed the USB driver and updated the packages. So I go through these instructions first http://forum.xda-developers.com/showthread.php?t=1568340 and I can't get the KF to be recognized as a device through adb. So I go back to the PC World instructions (linked above) and I follow steps through step 8. And I still can't get the KF to be displayed through adb. When I try to kill the adb server and then enter adb devices, I still can't get the KF to be recognized.
Oh and btw, Windows 7 does recognize the device as a "Kindle".
Any help would be greatly appreciated.
Sparty On!
Use the following fastboot commands:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or
adb shell idme bootmode 4000
adb this should be the way it works:
Sent from my Amazon Kindle Fire using Tapatalk 2
Thanks for the reply.
Unfortunately, I tried it and I get an invalid usage error. -i isn't a valid option. I can use -w, -s, -p, or -c.
I also obtained fastboot from the CyanogenMod Wiki for Fastboot and copied the exe to the /android-sdk/platform-tools folder and tried it. I also followed the wiki and copied it and found that placing it in the /tools/ directory wouldn't work because the missing .dll file isin the platform-tools directory and not in the tools directory.
I'm having the same problem I think since windows doesn't recognize my kindle I can't install the drivers.
AndroidSparty said:
Thanks for the reply.
Unfortunately, I tried it and I get an invalid usage error. -i isn't a valid option. I can use -w, -s, -p, or -c.
I also obtained fastboot from the CyanogenMod Wiki for Fastboot and copied the exe to the /android-sdk/platform-tools folder and tried it. I also followed the wiki and copied it and found that placing it in the /tools/ directory wouldn't work because the missing .dll file isin the platform-tools directory and not in the tools directory.
Click to expand...
Click to collapse
Us the same commands without -i 0x1949
fastboot oem idme bootmode 4000
fastboot reboot
Sent from my Amazon Kindle Fire using Tapatalk 2
ammubarak said:
Use the following fastboot commands:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or
adb shell idme bootmode 4000
adb this should be the way it works
Click to expand...
Click to collapse
None of these commands will work without first being able to communicate with the device. In order to communicate with the device you need working drivers. And even though Windows says the drivers are installed, it doesn't mean they are working.
For some reason, the Kindle Fire Utility, along with Windows is a bad combination. You could try to uninstall and delete the current drivers then reinstall OR set up your Linux to run adb and fastboot commands from the terminal.
From they way it sounds, your device is already rooted. All you need to do at this point is change the bootmode. This can easily be done in Linux as long as you are in root. For more info on bootmodes and drivers, read this thread:
http://forum.xda-developers.com/showthread.php?p=23747567
From a command prompt in windows CD over the the folder containing fast boot. One your command prompt is in that folder type fast boot devices. If it says that no devices found then you have a driver issue. What needs to be done next is open the folder containing kfu and run drivers.bat. this should install the appropriate drivers. Once this is done open kfu, select option one, then option 2. This should cause your fire to reboot in normal mode. IF that doesn't work you can push a boot.img to your fire in fast boot if for some reason you fouled up the system directory. Let me know if that does the trick first, if not I'll explain how to fastboot it back to a working condition.
Edit: in kfu select the option that says normal boot mode. Not sure if its option 2 or not. I'm not in front of my PC
Sent from my MB860 using XDA
I received mine with 6.3 and KFU wouldn't recognize it even after using the driver installation. BUT I found way around it. You need to install the drivers manually, and then KFU will work. Download the drivers, then extract the .android folder (create it if you don't have one) to
C:\Documents and Settings\YOURUSERNAME\.android open up your device manager, click on the Kindle and follow the UI to select the .android folder. Restart and use KFU. Enjoy!
soupmagnet said:
None of these commands will work without first being able to communicate with the device. In order to communicate with the device you need working drivers. And even though Windows says the drivers are installed, it doesn't mean they are working.
For some reason, the Kindle Fire Utility, along with Windows is a bad combination. You could try to uninstall and delete the current drivers then reinstall OR set up your Linux to run adb and fastboot commands from the terminal.
From they way it sounds, your device is already rooted. All you need to do at this point is change the bootmode. This can easily be done in Linux as long as you are in root. For more info on bootmodes and drivers, read this thread:
http://forum.xda-developers.com/showthread.php?p=23747567
Click to expand...
Click to collapse
Thanks for the info. I'm on my Windows box now, but i'll try the Linux directions in that URL tomorrow and will get back to you. Thanks!
backspacepc said:
From a command prompt in windows CD over the the folder containing fast boot. One your command prompt is in that folder type fast boot devices. If it says that no devices found then you have a driver issue. What needs to be done next is open the folder containing kfu and run drivers.bat. this should install the appropriate drivers. Once this is done open kfu, select option one, then option 2. This should cause your fire to reboot in normal mode. IF that doesn't work you can push a boot.img to your fire in fast boot if for some reason you fouled up the system directory. Let me know if that does the trick first, if not I'll explain how to fastboot it back to a working condition.
Edit: in kfu select the option that says normal boot mode. Not sure if its option 2 or not. I'm not in front of my PC
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Good news, I ran fast boot devices without an error. Bad news, it didn't list any devices. Just sent me to another blank command line.
When I initially ran install drivers.bat through FK Utility, it installed the drivers successfully, from what it said. I just ran it again and it said the drivers were installed successfully and the driver name is Google, Inc (WinUSB).
When I ran KF Utility (run.bat), it says that the ADB Status is offline. At this point, I would think that since ADB is offline, the Utility won't work? Stupid Windows!!!
AndroidSparty said:
Thanks for the info. I'm on my Windows box now, but i'll try the Linux directions in that URL tomorrow and will get back to you. Thanks!
Good news, I ran fast boot devices without an error. Bad news, it didn't list any devices. Just sent me to another blank command line.
When I initially ran install drivers.bat through FK Utility, it installed the drivers successfully, from what it said. I just ran it again and it said the drivers were installed successfully and the driver name is Google, Inc (WinUSB).
When I ran KF Utility (run.bat), it says that the ADB Status is offline. At this point, I would think that since ADB is offline, the Utility won't work? Stupid Windows!!!
Click to expand...
Click to collapse
Actually it will, status will still be off line, just select the boot mode option, and then on the next screen select normal bootmode
Sent from my MB860 using XDA
For future reference if you want to use Linux to issue fastboot and adb commands, here's the tutorial:
http://forum.xda-developers.com/showthread.php?p=22067293
I'd suggest using Linux as it is WAY more stable and WAY more reliable.
soupmagnet said:
For future reference if you want to use Linux to issue fastboot and adb commands, here's the tutorial:
http://forum.xda-developers.com/showthread.php?p=22067293
I'd suggest using Linux as it is WAY more stable and WAY more reliable.
Click to expand...
Click to collapse
I completely agree, I use and am familiar with both and it sounded like he was trying to do it from a windows machine.
Sent from my MB860 using XDA
backspacepc said:
I completely agree, I use and am familiar with both and it sounded like he was trying to do it from a windows machine.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Actually...I'm a she.
Since I have both available to me...it sounds like I should scrap the Windows (which is an understatement anyway) and use Linux/Ubuntu. That I can do!
I'll try the Linux directions later today and will let you know how I come out. Thanks again for the help!
Edit: Okay just tried it & I still can't get adb & fastboot to recognize the device. I followed the "Enable ADB under Ubuntu/Linux" directions and still nodda.
AndroidSparty said:
I'll try the Linux directions later today and will let you know how I come out. Thanks again for the help!
Edit: Okay just tried it & I still can't get adb & fastboot to recognize the device. I followed the "Enable ADB under Ubuntu/Linux" directions and still nodda.
Click to expand...
Click to collapse
Sorry ma'am! did you also try the directions I posted for windows as far as kfu? Its starting to sound like you may not have fully flashed fff
Sent from my MB860 using XDA
backspacepc said:
Sorry ma'am! did you also try the directions I posted for windows as far as kfu? Its starting to sound like you may not have fully flashed fff
Sent from my MB860 using XDA
Click to expand...
Click to collapse
You may also want to try to rerun your root script, oddly enough I've had that work before too.
Sent from my MB860 using XDA
AndroidSparty said:
Edit: Okay just tried it & I still can't get adb & fastboot to recognize the device. I followed the "Enable ADB under Ubuntu/Linux" directions and still nodda.
Click to expand...
Click to collapse
Did you notice the second post in the Linux tutorial?
kinfauns said:
Thanks for the guide on setting this up for linux. I just wanted to point out a small error in the instructions. The echo command above is incorrect and will not do what you intended. It should be corrected to
Code:
echo 0x1949 >> ~/.android/adb_usb.ini
Click to expand...
Click to collapse
backspacepc said:
Sorry ma'am! did you also try the directions I posted for windows as far as kfu? Its starting to sound like you may not have fully flashed fff
Sent from my MB860 using XDA
Click to expand...
Click to collapse
I just ran kfu and I I was able to get it to do a normal boot. YAY!
Then I ran the .bat file in the KFU and I selected the permanent root. During the activating fastboot, it said that "Oops something went wrong...." it couldn't find the kindle. Then it installed twrp.img is missing and it downloaded successfully. So then I got the Notice, and it's installing TWRP and it's waiting for the device. I turned the Kindle off & on a few times to get the KFU to recognize the Kindle, and no luck. At least I was able to boot into the KF while it's still still waiting for the device. BUT....at this point during the TWRP install process, it's waiting for the device and not recognizing it.
soupmagnet said:
Did you notice the second post in the Linux tutorial?
Click to expand...
Click to collapse
I did, but I used vi instead of gedit. And i verified that 0x149 was in the file on a new line.
AndroidSparty said:
I did, but I used vi instead of gedit. And i verified that 0x149 was in the file on a new line.
Click to expand...
Click to collapse
I can't imagine why using vi would make any difference but you could try gedit to see if it works.
As for TWRP, you could install it manually (Windows). Make sure you have a connection with adb/fastboot and use KFU to set your device to fastboot mode. Keep in mind when you do this that you may have to go through the whole process of fixing your drivers again (blame Windows/KFU).
When you're in fastboot mode, hold the power button until the device shuts down.
Shift + right click the KFU folder that contains fastboot (tools) and open as a command
In the prompt that comes up, enter:
Code:
fastboot -i 0x1949 flash recovery /path/to/twrp2.1.img
When your prompt says "waiting for device", turn the device back on.
Make sure it's twrp 2.1 Version 2.0 is installed in a different manner and will most likely cause problems if installed with the "flash recovery" command.
hi guys,,
love your forum....
simple NOOB question plzzzzzzzzzzzzz...
how do i get into fastboot,,,,
i have a kf and installe dthe drivers and every thing but no fastboot no adb nor even the KF tookit can detect my KF.... just cant get it into fastboot mood..
http://forum.xda-developers.com/showthread.php?t=1552547
http://forum.xda-developers.com/showthread.php?t=1668159
thanks for your reply.... i v been reading these to threads for very long time,,,, i just cant get the damn thing into fastboot mood... the KFU tool cant communicate with the device at all
i know im a noob but really need help
thanks
My Kindle is never recognized by KFU . Here's what you need:
Android SDK
Working adb and fastboot
KFU
On windows 7 shift+right click in your KFU tools directory and click "open command window here"
Here are the commands:
adb devices (your device should be listed)
adb shell (make sure it shows up as root, there will be a #, if not su)
idme bootmode 0x4002
reboot
Then your device should be booted into fastboot mode
He could be having the same problem I had, no /system/bin/sh so the adb technique will not work. I had to make a factory cable, which got me into fastboot mode (but ROMS still are not applying right, that question is in another thread).
gdjy said:
i have a kf and installe dthe drivers and every thing but no fastboot no adb nor even the KF tookit can detect my KF.... just cant get it into fastboot mood..
Click to expand...
Click to collapse
This is a shot in the dark, but have you checked that there is a .android directory under your user profile? Does it contain the adb_usb.ini configuration file? For some unknown reason the first time I tried, the install_drivers batch file didn't make the directory, so adb didn't initialize. Windows wouldn't let me make a new folder named .android so I had to go to the command prompt and make the directory myself using the old MS-DOS md command then copy the configuration file.
There is a section in Kindle Fire For Beginners that describes how to verify the drivers are loading. If you haven't seen it, it's worth the read.
SLOmtb said:
This is a shot in the dark, but have you checked that there is a .android directory under your user profile? Does it contain the adb_usb.ini configuration file? For some unknown reason the first time I tried, the install_drivers batch file didn't make the directory, so adb didn't initialize. Windows wouldn't let me make a new folder named .android so I had to go to the command prompt and make the directory myself using the old MS-DOS md command then copy the configuration file.
There is a section in Kindle Fire For Beginners that describes how to verify the drivers are loading. If you haven't seen it, it's worth the read.
Click to expand...
Click to collapse
Thanks for the KFFB plug. Just as an FYI, fastboot doesn't look at the adb_usb.ini file... adb is the only thing that looks at it.
gdjy said:
thanks for your reply.... i v been reading these to threads for very long time,,,, i just cant get the damn thing into fastboot mood... the KFU tool cant communicate with the device at all
i know im a noob but really need help
thanks
Click to expand...
Click to collapse
I just updated my fastboot guide (the second link I gave you) with details on how to get the hardware IDs and identify whether or not you are in fastboot mode. Take a look again and see what your hardware IDs are. If that doesn't help you, post a more detailed description of what you are doing, what the device is doing, what errors you get, etc. The more details you can provide, the easier it will be for your helpers to determine what's happening. Look at the sticky post at the top of this section.
i know this is also a stupid question, but how do i issue the "fastboot oem format" command? i tried partitioning my kf but it failed....
Hey guys,
so I'm pretty new to the whole android scene and thought it would be a good idea to root my kindle fire. So, i went and downloaded the kindle fire utility and hit install permanent root with superuser.... but didnt put on twrp. oops. I was one of the few unfortunate ones whos rooting didnt work so smoothly. Now i have a kindle that is stuck on the stock start up screen indefinitely. When i plug it in it says windows does not recognize the device - just install the drivers, no big deal right? wrong. i installed the android sdk and all that jazz, and i installed the drivers packed with the kindle fire utility, and still my computer recognizes it as a universal serial bus controller.
every guide for unbricking either assumes you have twrp, or that the re installation of drivers will fix it. im at a complete and utter loss
Josepho1997 said:
Then, in cd to fastboot in cmd and type:
Code:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
Click to expand...
Click to collapse
So, i installed the drivers, and opened up the cmd window, but i have no idea how to navigate to the correct directory through cmd now. sorry about my ignorance, really, but could you break t down a tad more?
cellophanemask said:
So, i installed the drivers, and opened up the cmd window, but i have no idea how to navigate to the correct directory through cmd now. sorry about my ignorance, really, but could you break t down a tad more?
Click to expand...
Click to collapse
Navigating to a directory is very easy.
Type cd and then put the file path after it.
Example:
cd c:\Program Files\ Adobe
Shift+ right click on the tools folder in kindle fire utility select open command window here.
I was just messing around with TWRP trying to flash a new ROM. I forgot to make a backup and wiped the internal storage + system (in other word I wiped everything) I have the files in my computer but I don't know how to access them since the computer can't recognize my device. Any suggestions? :crying:
You need to enter recovery and adb push the files to your sdcard. Open a command window where adb is located
Code:
adb push rom.zip/sdcard/
Thepooch said:
You need to enter recovery and adb push the files to your sdcard. Open a command window where adb is located
Code:
adb push rom.zip/sdcard/
Click to expand...
Click to collapse
Since the device can't be recognized I would try to search for the ADB drivers. This happened to me on my kindle fire hd 7" and the only way I could fix it was by doing "adb sideload filenamehere.zip" after going into Advanced > ADB Sideload.
Hope I could help!
I'm very grateful
thanks
you rock bro
Thepooch said:
You need to enter recovery and adb push the files to your sdcard. Open a command window where adb is located
Code:
adb push rom.zip/sdcard/
Click to expand...
Click to collapse
Im new to this world of tablets and all the commands and prompt, etc... but I thought that I would never solve my problem lol. I'm still a noob but
Thank you for all what you did for my kindle fire hd. I just wanna let people know you helped me unbrick my kindle ( you worked more than 4 hours to be exactly on my kindle) not many people in this forum would do that :good: and thanks to all the developers and mods you nailed it quite well on unbricking my kindle using the programs they have developed.
Editing the drivers so they could work on my machine (I live in El Salvador so my region is a problem when i try to install the drivers) was no easy quest and using teamviewer for letting you work was cool, but the best part is that you installed the cm10.1 by Hash which I had before bricking my device. You saved my kindle bro, thanks A LOT!!!!! I appreciate it. :victory: