Develop Bugs

Galaxy nexus case mate pop case

Finally galaxy nexus pop case!
http://www.amazon.com/s/ref=nb_sb_n...&field-keywords=galaxy+nexus+pop+case&x=0&y=0
its up on amazon
but I have a question it says its for galaxy nexus i515 is that mean its only going to fit verizon LTE model? anyone know? anyone using this case?

WTF???
Why comes the pop case for the S2 with a built-in stand and the one for the nexus comes without???
Sent from my GT-I9100 using XDA App

kalle788 said:
WTF???
Why comes the pop case for the S2 with a built-in stand and the one for the nexus comes without???
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
yes..I was disappointed too ..

I have the toughcase and it fits my gsm nexus like a glove with no gaps at all. I didnt find another version for the verizon nexus. I ordered mine from htcpedia.com and they told me they contacted casemate but couldnt get an answer. The i515 is a tad thicker so i would think this should fit the 9250 but might not be perfect. Im not sure about the popcase.

My casemate pop is sitting in my closet waiting to go up on ebay. It's very protective but the charging port doesn't fit most chargers and is Very hard to take off, also the glossy plastic is a scratch magnet. I tried to like it but these issues are unacceptable
Sent from my (GSM) Galaxy Nexus using Tapatalk

MouseIdt said:
My casemate pop is sitting in my closet waiting to go up on ebay. It's very protective but the charging port doesn't fit most chargers and is Very hard to take off, also the glossy plastic is a scratch magnet. I tried to like it but these issues are unacceptable
Sent from my (GSM) Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used a drill bit to open up a hole for the backside microphone that was covered, and a file to widen the USB opening, so that I can use it with a car charger. Since it works well with the GSM extended battery, I prefer the tactile button action over the other 7 cases I have (cruzerlie, diztronic, case mate tough, silicrilic, rock, otterbox commuter, generic TPM).
Sent from my Galaxy Nexus using Tapatalk

vagelis said:
I used a drill bit to open up a hole for the backside microphone that was covered, and a file to widen the USB opening, so that I can use it with a car charger. Since it works well with the GSM extended battery, I prefer the tactile button action over the other 7 cases I have (cruzerlie, diztronic, case mate tough, silicrilic, rock, otterbox commuter, generic TPM).
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Shouldn't need to drill a case to make it work. It should be working out of the box.
I've never been a fan of the Pop Case. It's either, barely there or tough case for me.
I had a Pop case for the Nexus S and it was a awful experience. I had the back creak because I was trying to push the phone out of the case too hard by accident.

vagelis said:
I used a drill bit to open up a hole for the backside microphone that was covered, and a file to widen the USB opening, so that I can use it with a car charger. Since it works well with the GSM extended battery, I prefer the tactile button action over the other 7 cases I have (cruzerlie, diztronic, case mate tough, silicrilic, rock, otterbox commuter, generic TPM).
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Can you post some pics I was thinking the same thing, but with a large heated pin or something like that.
Do you all think we can make some kind of petition to case-mate for a swap, after all its not a cheap case and they could have fix this issues in the factory ?

Just got my Sena Ultra Slim case

As the thread title says, it just came in. Just put it on the phone and, no surprise, it's awesome. My phone is the Verizon LTE version with an extended battery and it fits perfectly (sure, it's a tight fit, but that's normal for Sena's stuff and will get easier to remove/replace as the leather molds to the phone). I'll put some pics up later when I can locate the regular digital camera.

I have had the opposite experience. I have a GSM nexus and the case is far too tight. The power and volume buttons are frequently pressed causing pocket screen shots and unnecessary ware on the buttons. I have had the case for just over a week and while it has stretched its still causing problems.
The best slip case so far has been a microfiber bag intended for my sunglasses. Although its not as pretty as the sena.
Sent from my Galaxy Nexus using XDA App

One thing I have done to help the cases stretch is reach inside and spread it out. I did it by putting an old 2.5" laptop hard drive in the case.

Is it a pouch?
Sent from my Galaxy Nexus using xda premium

Got mine too. I have the GSM version and I have to agree, the fit is too tight.

I considered the Sena Ultra Slim too in my search for a nice and slim pouch but ultimately decided on the fitBag Beat.
It's not "super" slim as the Sena is but still slim. Have a look here if you are interested: http://forum.xda-developers.com/showthread.php?t=1454961

I love Sena ultra slim case. I had them on my HTC Desire, iPad 1 and iPad 2.
They are really tight in the beginning. But since they are leather, they stretch. After a week or two you should find them fitting snugly, but not too tight. As far as leather quality is concern, they are top notch.
That being said, I just don't feel like using a pouch on my phone anymore. But if I were to get one, this is definitely my choice.

Anyone else wishing there were thousands of tiny holes where the notification light sits (not to mention near the ringer speaker!) ?
Maybe I can mod mine with a needle and some patience...

roadhead said:
Anyone else wishing there were thousands of tiny holes where the notification light sits (not to mention near the ringer speaker!) ?
Maybe I can mod mine with a needle and some patience...
Click to expand...
Click to collapse
I was thinking of punching a hole in it for the notification light.
I am still waiting to buy one here in the UK, anybody know anywhere I can get one from?

s4vva said:
I was thinking of punching a hole in it for the notification light.
I am still waiting to buy one here in the UK, anybody know anywhere I can get one from?
Click to expand...
Click to collapse
Just go to Sena's homepage and order it! You will have it in 2 or 3 working days. Really fast delivery! But I would buy another case since it presses down the volume and power buttons all the time. I have tried to stretch the case a lot, but since the seaming is on the inside the problem still remains occasionally...

fireon123 said:
Just go to Sena's homepage and order it! You will have it in 2 or 3 working days. Really fast delivery! But I would buy another case since it presses down the volume and power buttons all the time. I have tried to stretch the case a lot, but since the seaming is on the inside the problem still remains occasionally...
Click to expand...
Click to collapse
I find this happening less and less as I use the case, without even doing any deliberate stretching beyond leaving the phone in the pouch for hours at a time.
This thing is great for my battery life too as knowing I will need to remove the case helps me resist the urge to wake it up just to flip the home screens back and forth

The case is really tight at first but after a day it has stretched out quite nicely and it is a very comfortable fit, no issues with power button anymore.
Super slim, love it!

Brown case
Brown case with hole punched to see LED.

belair56 said:
Brown case with hole punched to see LED.
Click to expand...
Click to collapse
nicely done, I don't have my case yet but I would have thought the handset is supposed to go into the case thin side first?

s4vva said:
nicely done, I don't have my case yet but I would have thought the handset is supposed to go into the case thin side first?
Click to expand...
Click to collapse
I like to fold down the opening (peak) to see the time.
Sent from my Galaxy Nexus using xda premium

Sena Corsa
Hey guys! New here.
So I was about to buy the Ultraslim when much to my surprise I found a new case waiting for me! The ultraslim is now gone but the new design is much more appealing to me. Can't post links since I'm new, but it should be easy to find!
I'm hoping they fixed the tight fit problems. I might send a quick email to them asking about this.

Zengster6474 said:
Hey guys! New here.
So I was about to buy the Ultraslim when much to my surprise I found a new case waiting for me! The ultraslim is now gone but the new design is much more appealing to me. Can't post links since I'm new, but it should be easy to find!
I'm hoping they fixed the tight fit problems. I might send a quick email to them asking about this.
Click to expand...
Click to collapse
http://www.senacases.com/samsung-cases/galaxy-nexus/corsa/
Nice!

PaulCayard said:
Nice!
Click to expand...
Click to collapse
I know huh? I sent them an email regarding fit and I'll post what they say here when they reply!

How about a ICS Blue stripe? Come on, look at the phone.
Sent from my Galaxy Nexus using xda premium

Zengster6474 said:
I know huh? I sent them an email regarding fit and I'll post what they say here when they reply!
Click to expand...
Click to collapse
Thanks!
Some info from the website:
The Corsa shows its style by exhibiting textured genuine Italian leather available in various solid colors with an accent stripe which is off-set for a racing inspired sportiness. It offers an innovative pull strap system for easy release of the Galaxy Nexus. It is crafted to protect the Samsung Galaxy Nexus with reinforced stitched edging to provide additional protection for the side and bottom of the pouch. It is individually handcrafted from the finest Italian Napa leather with Sena's well-known quality and strong attention to detail. The Corsa offers protective functionality with a sporty European designer pouch style.
Accent stripe, offset for a racing inspired sportiness
Dual-texture style with vincado and perforated leathers
Ultra-slim pouch design
Soft velvet lining with light protective layer
Sena craftsmanship and quality
Click to expand...
Click to collapse
Available color:
Black/Red (see pic of my previous post)
Black/Orange
White/Red (very nice)
Red/White

Trident Kraken vs. Otterbox Defender.......FIGHT!

Here is a quick video review I made of the Trident Kraken vs. the Otterbox Defender for our GN:
Feel free to ask any questions you may have and I'll try my best to answer them.

I have a Defender, and it sucks for this phone. The holster security is nice, but the thing looks retarded when the phone isn't in it....
Thanks for posting the video, you have solidified my decision in buying the Kraken that comes in next week!

Good review. And yeah I agree the belt holster clip on the trident is not easy to use. A more conventional type would have been better.

Ahh I thought this would be the Kraken against the Commuter, not the Defender. I think the Defender is atrocious IMHO

Have you considered comparing these cases to the Incipio Silicrylic? I always go with Incipio when possible. Their support is amazing, their prices are reasonable, and their products look nice.

Pandages said:
Have you considered comparing these cases to the Incipio Silicrylic? I always go with Incipio when possible. Their support is amazing, their prices are reasonable, and their products look nice.
Click to expand...
Click to collapse
Incipio states all of their products are incompatible with the extended battery. Does it fit?

idefiler6 said:
Incipio states all of their products are incompatible with the extended battery. Does it fit?
Click to expand...
Click to collapse
Their feather case and the silicrylic case both do not fit with the extended battery and cover on, however if you pop the back door off the Nexus both fit like normal. I'm not sure about their TPU case though.

Yeah, I decided to compare these two because they are both supposed to be heavyweight cases unlike most others on the market.
I'd probably compare the Commuter to something like the Seidio cases.
As far as the Incipio, that would probably compare with the likes of the SGP Neo Hybrid or Ultra Hybrid.
I might do something like that next.
Sent from my Galaxy Nexus using xda premium

If you want a brick tough case go ballistic. Its awesome. Managed to fit it on my extended bat GSM. Made for i515 but fits wife's GSM too. Love it!
Sent from my Galaxy Nexus using xda premium

Does that come with a holster? If so, I may make a comparison vid with that one against the Trident Kraken.
Sent from my Galaxy Nexus using xda premium

Just got my defender today. I'll go ahead and give my 5-minute analysis. My Trident Kraken should be here early next week.
Pros:
Will protect phone very well (obviously)
Belt-clip holster is top-notch
The feel of pressing the side buttons is nice
Fantastic grip on the phone
Cons:
Dust and lint MAGNET
Hard to move in/out of pocket, might as well use the holster everywhere you go
Built-in screen protector is HORRIBLE. It makes the screen look as if it is covered in a thin layer of grease (I will be tearing this thing off)
Fairly impossible to see notification pulse if not viewing at direct angle
My GSM moves up/down inside of the case slightly (may not occur with extended battery)
Two other small gripes are that the mic hole is a bit off from where it is cut into the silicone shell (probably not a big deal, though). Also, pulling back the dust covers for access to the charging and audio port is also a small pain due to the way they open. It's essentially a two hand task (one to hold open the cover, the other to plug in) which was different from my old phone where once the cover was open, it would stay open by itself.
I will probably only use the Defender when I go to work. Other than that, I see the Kraken as being my daily case. I'll update in a few days with my opinion on it.

OP, it appears the Kraken covers up the LED notif light. Can you confirm?

WiredPirate said:
OP, it appears the Kraken covers up the LED notif light. Can you confirm?
Click to expand...
Click to collapse
It covers up about half of it, maybe a little more

Ngo93 said:
It covers up about half of it, maybe a little more
Click to expand...
Click to collapse
Yea that's the only thing I hate about the kraken... other than that the kraken is an amazing case I love it
Sent from my Galaxy Nexus using xda premium

dnguyen1988 said:
Yea that's the only thing I hate about the kraken... other than that the kraken is an amazing case I love it
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yeah I was kinda bummed when I figured this out. Was looking forward to having a multicolored notification LED again, but I'd rather have the protection of the Kraken
Sent from my Galaxy Nexus using xda premium

Nitemare3219 said:
Just got my defender today. I'll go ahead and give my 5-minute analysis. My Trident Kraken should be here early next week.
Pros:
Will protect phone very well (obviously)
Belt-clip holster is top-notch
The feel of pressing the side buttons is nice
Fantastic grip on the phone
Cons:
Dust and lint MAGNET
Hard to move in/out of pocket, might as well use the holster everywhere you go
Built-in screen protector is HORRIBLE. It makes the screen look as if it is covered in a thin layer of grease (I will be tearing this thing off)
Fairly impossible to see notification pulse if not viewing at direct angle
My GSM moves up/down inside of the case slightly (may not occur with extended battery)
Two other small gripes are that the mic hole is a bit off from where it is cut into the silicone shell (probably not a big deal, though). Also, pulling back the dust covers for access to the charging and audio port is also a small pain due to the way they open. It's essentially a two hand task (one to hold open the cover, the other to plug in) which was different from my old phone where once the cover was open, it would stay open by itself.
I will probably only use the Defender when I go to work. Other than that, I see the Kraken as being my daily case. I'll update in a few days with my opinion on it.
Click to expand...
Click to collapse
the case is made for the cdma version or extend version, if you put two small bandaids on the inside of the back plastic plate it will keep your phone from shifting and avoid all scratches.

Ngo93 said:
It covers up about half of it, maybe a little more
Click to expand...
Click to collapse
dnguyen1988 said:
Yea that's the only thing I hate about the kraken... other than that the kraken is an amazing case I love it
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks for the confirmation. I should be getting my Kraken in Monday and I will start thinking of ways to cut the hole out.. Any ideas what the best way to do this will be? Maybe just a drill bit?

WiredPirate said:
Thanks for the confirmation. I should be getting my Kraken in Monday and I will start thinking of ways to cut the hole out.. Any ideas what the best way to do this will be? Maybe just a drill bit?
Click to expand...
Click to collapse
No prob and yea that probably is the best way. U can probably cut off a little bit of the silicon and the then use a drill to put a little groove in the face plate so the light can show
Sent from my Galaxy Nexus using xda premium

dnguyen1988 said:
No prob and yea that probably is the best way. U can probably cut off a little bit of the silicon and the then use a drill to put a little groove in the face plate so the light can show
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Sweet, appreciate the info. Wish I had a mill lol.

Case-mate Tough Case revision....

Anyone have or have used the Tough Case after the revision by casemate? I want this case for my phone but haven't seen any reviews on the updated version. Also can anyone confirm that it can be used with the GSM extended battery (2000 mah)? Thanks.
Sent from my Galaxy Nexus using Tapatalk 2

Anyone?
Sent from my Galaxy Nexus using Tapatalk 2

I've got mine 4 days ago... What can I say:
Fantastic material, good build quality and nice touch. It really looks good on phone and give nice feeling while I am holding the phone. Yes, it gets little "bulky" (can't easily put phone into the pocket and take it out....) but, I am pretty sure that the phone is protected very well now and that's most important It gives nice grip and no chance of accidentally drop down...
Issues:
There was a little issue with power button that doesn't fit nice and it needs few hours/day to "settle in" but now it's okay... No similar problems with volume buttons. Actually now I don't need to put "force" on power button, just nice soft touch and it works.
Also, when I type something in landscape position the lower keys on keyboard are little hard to press quickly because the rubber is almost 2-2.5mm higher than display surface... But it's really not a issue that serious.
No problems with any other holes on case, camera/flash works well, speaker also... usb and headphone jack can be used normally..
I'm really pleased with case
I can take some pictures if u want 'cause it looks little different on phone than on web...
Any other questions?
p.s If u decide to buy it, go on amazon/ebay to save almost half of the case mate.com price

I would love some pics... Thanks again.
Sent from my Galaxy Nexus using Tapatalk 2

Here we go:

Thanks man. I think I'll give this case a chance.
Sent from my Galaxy Nexus using Tapatalk 2

jrodsep said:
Anyone have or have used the Tough Case after the revision by casemate? I want this case for my phone but haven't seen any reviews on the updated version. Also can anyone confirm that it can be used with the GSM extended battery (2000 mah)? Thanks.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
What is the revision about? Changes between old and new??
Thanks
Sent from my Galaxy Nexus using xda premium

accuphase said:
What is the revision about? Changes between old and new??
Thanks
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
As listed elsewhere, the revision opened up the USB port area and added a hole for the back mic.
I'm using the the white one now. It's not too bulky, and the buttons are easy to operate.

Also have one. The revision consists of more accurate cut outs & a mic cutout on the top of the battery door. This is by far my favorite case out of the 10 that I picked up. Very high quality material, great grip & durability. Top notch protection.
Sent from my i9250 (GSM) Galaxy Nexus

Haesslich said:
As listed elsewhere, the revision opened up the USB port area and added a hole for the back mic.
I'm using the the white one now. It's not too bulky, and the buttons are easy to operate.
Click to expand...
Click to collapse
I think that's the revision for the POP case. Since you are referring to the white one and the tough case doesn't come in white.

The Nexus Project said:
Also have one. The revision consists of more accurate cut outs & a mic cutout on the top of the battery door. This is by far my favorite case out of the 10 that I picked up. Very high quality material, great grip & durability. Top notch protection.
Sent from my i9250 (GSM) Galaxy Nexus
Click to expand...
Click to collapse
Does it fit with the 2000 mah battery?

jrodsep said:
I think that's the revision for the POP case. Since you are referring to the white one and the tough case doesn't come in white.
Click to expand...
Click to collapse
I misread "Tough" as "Pop". Whoops. Looks like they fixed the cutout at the bottom on this too.

Does anyone know if it fits with the 2000 mah battery?
Sent from my Galaxy Nexus using Tapatalk 2

How bad does it attract lint?
Sent from my Galaxy Nexus using XDA

I got mine last week. No issues with lint, although I am not sure I understand how lint could stick to it. the outside shell is a hard plastic, with an inner rubber shell.
The one thing that I am not happy about is the ox screen protector is being rubbed by the case, causing bubbles; but that is more an issue with the protector & not the case.

Oh I thought the silicone was over the hard plastic!

Nope. cusion is on the inside, with the protective shell covering it.

Looking for a slim leather pouch for Nexus

So far I found this one: PDair black with red stitches. Any other suggestions?
I need something in leather and very slim. Thanks

Used to have this on my One X. It's a but pricey but amazing leather.
http://www.senacases.com/samsung-cases/galaxy-nexus/
Sent from my Galaxy Nexus

http://www.amazon.com/Spigen-SGP08654-SGP-Leather-Crumena/dp/B0071QPIV2
Reviews I've seen/read rather enjoy this one. Has a magnetic pull strip that pushes your phone out.

FitBag has really nice ones. http://shop.fitbag.de/

Nburnes said:
Spigen-SGP08654-SGP-Leather-Crumena/dp/B0071QPIV2[/url]
Reviews I've seen/read rather enjoy this one. Has a magnetic pull strip that pushes your phone out.
Click to expand...
Click to collapse
I confirm. Had this case for last 6 months. Best case I ever owned.
Sent from my Galaxy Nexus using XDA Premium HD app

That spigen looks slick. Can anyone confirm whether or not this will work on the lte version with the OEM 2100 mah extended battery?
Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2

brycekerr said:
That spigen looks slick. Can anyone confirm whether or not this will work on the lte version with the OEM 2100 mah extended battery?
Sent from my Galaxy Nexus using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
I imagine so. Here about 2:35 : http://www.youtube.com/watch?v=4Fo_tEvZU-Y
He says he uses the GSM with the extended battery and I wouldn't imagine the Verzion one would be to much thicker. States it takes a day or two to "stretch".

UKpav said:
I confirm. Had this case for last 6 months. Best case I ever owned.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
The case looks sharp indeed. How is the little retractor doing? No damage to screen?
I had something similar for my old Palm Pre2 and it wacked my screen pretty quickly because the stitching inside.
Edit: is confirmed by a reviewer also:
The one critique I have with this pouch is that the strap you pull to pop the phone out is stitched into the inside of the pouch on the same side as the phone's screen. I have a screen protector on my phone, and am finding small dots/dents in the screen protector forming the shape of a square from the stitches inside the pouch anchoring the strap.
Click to expand...
Click to collapse
The case I got for Pre2 was the original model made by Palm and it still managed to damage the screen. I don't understand how was that possible as the screen was Gorila glass, but it had 2 thin mate spots that annoyed me the hell out.

I don't use screen protectors. Just a personal preference bit never liked them. After 6 months in and out of spigen pouch there is absolutely no marks on the screen. I mean not a single mark. I was thinking about cutting the strap and throwing it away because once the leather took shape of the phone I can now shake it out without using the strap and I found this to be much easier.
Leather looks better every next day (I went for brown version) and it feels really nice.
I promise I do not work for spigen but I have seen some of the other accessories they do and the quality of their products is second to none. Have a look how beautifully made are the ipad cases on spigen website. Can't wait until they make one for my nexus 7 as well.
Sent from my Nexus 7 using XDA Premium HD app

UKpav said:
I don't use screen protectors. Just a personal preference bit never liked them.
Click to expand...
Click to collapse
Don't worry, I hate screen protectors also.

I have the Sena one for Nexus, very slim and very good leather quality.
And it works with OEM extended battery also.
Sent from my Galaxy Nexus using Tapatalk 2

I almost bought this until I realized it was almost 1/2 an inch to short. I emailed the company to inquire about the possibility of a case made for larger Android phones and received a reply later the same day " Let me go ahead and pass this along to Dave so that he can take a look, and maybe we'll come out with a longer Sleeve just for phone like that one you have there."
http://www.saddlebackleather.com/Classic-Gadget-Sleeve

Nice
Nburnes said:
http://www.amazon.com/Spigen-SGP08654-SGP-Leather-Crumena/dp/B0071QPIV2
Reviews I've seen/read rather enjoy this one. Has a magnetic pull strip that pushes your phone out.
Click to expand...
Click to collapse
This one is very nice..good one