Develop Bugs

help please!

i think i bricked my epic 4g touch. i had ics fb21 on it and i tried to restore a gingerbread rom back onto it via cwm and something went terribly wrong. i tried all the steps in qbking77s youtube video about unbricking/unrooting. my phone successfully went through the steps but when it reboots it just boot loops. when i try to boot into recovery it continues to bootloop. download mode is still available? any suggestions? thanks in advanced

Have you tried putting it into download mode and then using one of the one click restores via odin? If its bootlooping, your not at a total loss
Sent from my SPH-D710 using xda premium

r2hudson said:
i think i bricked my epic 4g touch. i had ics fb21 on it and i tried to restore a gingerbread rom back onto it via cwm and something went terribly wrong. i tried all the steps in qbking77s youtube video about unbricking/unrooting. my phone successfully went through the steps but when it reboots it just boot loops. when i try to boot into recovery it continues to bootloop. download mode is still available? any suggestions? thanks in advanced
Click to expand...
Click to collapse
Did you have cwm touch on it ?
Sent from my SPH-D710 using Tapatalk

rshudson---use this lick
use this link and it will restore your epic completely with roon access and than find the recovery zip/tar and you will be fixed ...the link has directions and videos
http://forum.xda-developers.com/showthread.php?t=1433101
GOOD LUCK BRO !!!!!!!!!!!

andhow said:
Have you tried putting it into download mode and then using one of the one click restores via odin? If its bootlooping, your not at a total loss
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
i tried these but they seem to get stuck right before it completes. it freezes right before the end, no reboot, no nothing

Epix4G said:
Did you have cwm touch on it ?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
actually i did, installed it straight from rom manager. has this been a common problem?

r2hudson said:
actually i did, installed it straight from rom manager. has this been a common problem?
Click to expand...
Click to collapse
so in odin it stops at data. something ...u got A BRICK should have read what all the devs were saying and the other 10 threads that did the same as you ..... read read read ... when going from ics to gb always odin back to stock first then restore ... look in general you will find many threads about this already
http://forum.xda-developers.com/showthread.php?t=1504808
http://forum.xda-developers.com/showthread.php?t=1509795
http://forum.xda-developers.com/showthread.php?t=1509886&page=3

rocketman228 said:
use this link and it will restore your epic completely with roon access and than find the recovery zip/tar and you will be fixed ...the link has directions and videos
http://forum.xda-developers.com/showthread.php?t=1433101
GOOD LUCK BRO !!!!!!!!!!!
Click to expand...
Click to collapse
i have tried this, it just gets stuck at the data.img step, been stuck for over an hour. thanks all for your help

Epix4G said:
so in odin it stops at data. something ...u got A BRICK should have read what all the devs were saying and the other 10 threads that did the same as you ..... read read read ... when going from ics to gb always odin back to stock first then restore ... look in general you will find many threads about this already
Click to expand...
Click to collapse
wow, thought so, i guess there hasnt been a way to undo this? it only gets stuck when i use the one click odin. when i use the regular odin it completes but just bootloops. could i take this to a sprint repair center?

read links
u have a bad data partition and are bricked .... read before doing anything like this ....many people before you did this and there is no way back besides jtag ....
you can take to sprint and they may replace but who knows they may turn you away

r2hudson said:
actually i did, installed it straight from rom manager. has this been a common problem?
Click to expand...
Click to collapse
Oh man...ROM Manager and Touch recovery?... not sure if that's fixable
Sent from my Nexus S 4G using xda premium

I believe a few people have said it already. But don't use from manager to flash recoveries. Especially the touch one. You will brick your phone and can't fix it. Only a JTAG service would fix it or a replacement by sprint. Either way good luck and read up on stuff before you try it out.
Sent from my SPH-D710 using xda premium

How many bricks does this make now? I had one. Lol
Sent from my Nexus S 4G using xda premium

musclehead84 said:
How many bricks does this make now? I had one. Lol
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
I swear more than 30 but who knows how many didn't post and such
Sent from my SPH-D710 using Tapatalk

OH Shix, Dang Dawg, I didn't know there was a such thing as a soft/full brick! I am lucky, I was using mobile odin and flashed the md5 check instead of the tar for fb21 modem and my phone was acting very similar but I just flashed the ONE CLICK EL29 and I was back to stock. hope if you havent tried that, you do and it works for you. I didn't like the touch cwm. but now I am deleting it from sdcard so i dont mistakenly soft/full brick my device. Keep us updated!

UPDATE
UPDATE
after using odin to unroot/unbrick my epic4gt and having still it fail to turn on passed the boot screen, i took my busted phone back to sprint on monday. told them what the problem was, "my phone wont go passed the first screen when i turn it on". they said "ok, we'll just erase everything off, should be as good as new".
i stood around waiting for about 45 minutes, i was so bored i even shamefully sent out a tweet from an iphone..smh. sales associate then came back to me saying," ive never seen anything like this, nothing will work on it, you must have rooted this phone?" my response was "i have done nothing to that phone".
with a kinda upset smirk on his face he says, "it had to be rooted buuuuut since we have no proof we will order you a phone for free, come pick it up friday."
life has been so tough w/out my epic for a whole week, happy that i get my new one on friday

You know...
I'm starting to wonder how I feel about ppl that brick their phones, through fault of their Own, then take them into sprint claiming the "update broke it!", "i never rooted that! i have No Idea what you're talking about!", and I wonder if this is going to make it harder for people with Legitimate issues to get replacements, and affect the way Sprint looks at rooting our phones in general. This Affects Their Bottom Line.
Sent from my calculator watch.

kingdazy said:
You know...
I'm starting to wonder how I feel about ppl that brick their phones, through fault of their Own, then take them into sprint claiming the "update broke it!", "i never rooted that! i have No Idea what you're talking about!", and I wonder if this is going to make it harder for people with Legitimate issues to get replacements, and affect the way Sprint looks at rooting our phones in general. This Affects Their Bottom Line.
Sent from my calculator watch.
Click to expand...
Click to collapse
I wonder this same thing....I get that people want their phone working g but on the other hand its not Sprints fault you bricked it. And then just flat out lying? Its a grey area for sure .
Sent from my SPH-D710 using XDA App

dodgerbluehero said:
I wonder this same thing....I get that people want their phone working g but on the other hand its not Sprints fault you bricked it. And then just flat out lying? Its a grey area for sure .
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Uh Oh here comes the moral police.... Not saying you are wrong but really if people can get something replaced for free, do you really think the majority would not try it... We live in a grey world.... It is what it is
Men Lie, Women Lie, Numbers Never Lies - "Jay-Z" Just felt like saying that....lol
---------- Post added at 06:49 PM ---------- Previous post was at 06:47 PM ----------
r2hudson said:
UPDATE
after using odin to unroot/unbrick my epic4gt and having still it fail to turn on passed the boot screen, i took my busted phone back to sprint on monday. told them what the problem was, "my phone wont go passed the first screen when i turn it on". they said "ok, we'll just erase everything off, should be as good as new".
i stood around waiting for about 45 minutes, i was so bored i even shamefully sent out a tweet from an iphone..smh. sales associate then came back to me saying," ive never seen anything like this, nothing will work on it, you must have rooted this phone?" my response was "i have done nothing to that phone".
with a kinda upset smirk on his face he says, "it had to be rooted buuuuut since we have no proof we will order you a phone for free, come pick it up friday."
life has been so tough w/out my epic for a whole week, happy that i get my new one on friday
Click to expand...
Click to collapse
Congrats... next time dont start a new thread about something that already had a million other threads and a Official How I Bricked my phone thread.... I KNOW YOU SAW IT.....lol

Yeah say what you want but I pay 8 dollars a month to sprint for insurance so weather its my fault or not they should replace my device which they did and I could give a **** less how it effects everything because I pay for insurance.
Sent from my SPH-D710 using XDA App

Help bricked my phone

i flashed an international rom not knowing it wasnt gonna work
now my phone wont boot back up someone please help
is there any way can recover my phone?

Can you get into download mode?
Hold the volume down button, power, and home.
Sent from my SGH-T999 using xda app-developers app

ayeitschris said:
Can you get into download mode?
Hold the volume down button, power, and home.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
nope i tried it.. it wont boot at all

when i plug it into my computer the connection sound goes on but that about it
nothing boots up i cant go into download mode or recovery

Sorry bud, you've hard bricked your device... You're going to need to get it fixed by someone who can JTAG it

adslee said:
Sorry bud, you've hard bricked your device... You're going to need to get it fixed by someone who can JTAG it
Click to expand...
Click to collapse
but the usb connection still reads it through my computer
when i plug it in the red notification light turns on but that it after

What does your computer identify it as?

aNYthing24 said:
What does your computer identify it as?
Click to expand...
Click to collapse
sadly nothing..when i plug it in just the sound
goes on but nothing pops up on my computer

just buy a new device.........
Sent from my Nexus 7 using Tapatalk 2

Its dead. Sorry
Sent from a Galaxy 3759295 light years away.
Thank me if I helped

How long ago did you get the phone...
Call your carrier and tell them that the phone is defective and it was overheating and doesn't even boot up. See what they tell you cuz' they may give you a discounted phone or a brand new... who knows!
If you have been a good customer and tell a good story they may give you a new one!

marcviado said:
but the usb connection still reads it through my computer
when i plug it in the red notification light turns on but that it after
Click to expand...
Click to collapse
Jeez, the guy told you its brick and you still ask the same damn question, your wasting time looking for the answer, IT IS BRICKED....JTAG BUD.

Run kies and see if it recognizes ur device
Sent from my SGH-I897 using XDA Premium App

TheAxman said:
Jeez, the guy told you its brick and you still ask the same damn question, your wasting time looking for the answer, IT IS BRICKED....JTAG BUD.
Click to expand...
Click to collapse
jeez i wanna know where in there did i ask the same question? lol i didnt ask anything besides say that my computer makes a
sound when i plug the phone in

to everyone who tried to help me out thanks
i used my warrenty and ordered a new phone
that will be coming in the mail

I'm glad you got one through the warranty dude. Many people don't have that option and just have to buy another phone or continue to try to resolve it. Your curiosity to see if there is anything else that can be done can annoy some people but this is how everyone learns. Props to you my man, glad you got a replacement.
Can you try something for me? Before you do anything to your phone in the dial pad put in ##rtn# see if it's a refurb and share with us bruh.
Sent from my SGH-T999 using xda app-developers app

not to make op feel bad, but why do people think its ok to flash any rom?

Sorry to hear.

That's what happens when you flash before reading.

G1_enthusiast said:
not to make op feel bad, but why do people think its ok to flash any rom?
Click to expand...
Click to collapse
Better yet why do people think their entitled to a new phone at no cost to them when they ruined it all by themselves?

Whats the trick for a Hard Brick??

I can get Qhsusb_dload to show up from time to time on my PC when it connects. but I went to try and flash the Slim Rom from the original android section and it bricked my phone. no screen light up or anything. no LED flashing. i just get Qhsusb_dload when i connect to a PC.
What tricks can i do to get odin to see this.

Did you try the 3 button combination ? Volume down, home key?
Sent from my GT-N7100 using xda premium

[email protected] said:
Did you try the 3 button combination ? Volume down, home key?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
yes i did. idk if im doing it right tho.

And power on button,What phone you using?
Sent from my GT-N7100 using xda premium

billard412 said:
removal of moderated material
Click to expand...
Click to collapse
You need an attitude check. This was posted in Q&A, he had a question and needs help. If this was posted in the wrong forum, I could MAYBE see this kind of attitude but not here. You were helpful in giving him a link to get his device repaired, but the rest of it was just uncalled for.
kyhassen said:
I did research and no one gave a straight answer anywhere. i googled countless places. a lot of them said to do these button combinations and none worked. some say the only way to do it is through a jig. as you say Jtag. i do everything the way i usually do it by reading the posts before flashing.. idk what went wrong here.
Click to expand...
Click to collapse
As far as I know, he is right about JTAG being your only repair option. This may sound like an obvious question, but I have seen this happen before. Are you sure you were downloading from the right forum? (i.e. not accidentally downloading a ROM meant for another carrier.)

I'm kind of curious how this happens. Never heard of bricking from simply flashing a rom.
Sent from my SPH-L710 using xda app-developers app

mulhiny said:
I'm kind of curious how this happens. Never heard of bricking from simply flashing a rom.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
If rom is for another carrier or the international version of the S3 (i believe the I9300) then it'll brick it quick.

I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.

kyhassen said:
I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.
Click to expand...
Click to collapse
Sprint is the SPH-L710. So yeah.. may have flashed the wrong rom.. Always double check.. and if your in doubt.. ASK! lol

Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app

kyhassen said:
I thought the i9300 is the sprint version. i had looked it up... but oh well. I did more research i missed one step which may have caused it, or my download corrupted. But my next option is to find someone with a Jtag in my area.
Click to expand...
Click to collapse
Yup you flashed the wrong ROM. I had this happen on my Evo 3D, I don't remember which ROM it was but someone had linked to it from the CDMA forum and I took their word for it being a CDMA ROM. It was GSM. Fortunately I was still able to load hboot and loaded clockwork mod via fast boot. I'm sure you've tried going into download mode or recovery a hundred times by now, but one hundred and one wouldn't hurt. Make sure you are pressing the right buttons in the right combination and letting go at the right time. Honestly I think the SIII is a pain to get into D/L or recovery mode. It always takes me a few tries. If you can do that, you won't need to JTAG it. Good luck!
---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------
smokeadrians said:
Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Ah that's right, he has some really nice instructional videos. Here is his YouTube page. I would also suggest looking him up on XDA.
Http://youtube.com/user/qbking77

smokeadrians said:
Use a jig. Will boot up into download mode. You need to use Odin and flash stock. Qbking video is really helpful. Good luck.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
jig wont work its done for. Only hope is jtag

evo4gnoob said:
jig wont work its done for. Only hope is jtag
Click to expand...
Click to collapse
Thats what i was thinking. i cant even get the thing to turn on.

kyhassen said:
Thats what i was thinking. i cant even get the thing to turn on.
Click to expand...
Click to collapse
these guys do wonders http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/

evo4gnoob said:
these guys do wonders http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Click to expand...
Click to collapse
so i have heard. Im gonna look for one near by my area. if not i will use those guys. i have heard they are good form several of you guys here and other sites. thank you. At least i have my Nexus 7 and free txting app lmao. quite a giant cell phone if you ask me...

Q&A is for questions
No one should be vilified for asking a question, in the proper place, after researching - and no one should be made to feel worse than they already do when they've got an expensive paperweight they're trying to resurrect. We were all new once. Have patience and teach - especially to those who really seek to learn from their mistakes.

Bummer! good to see a lot of evo guys making thier way over.
Sent from my SPH-L710 using xda app-developers app

At least the plus side is i got to play stupid and get a replacement for 35$ bucks from sprint. screw that 60 bucks and I get it with in a 2-3 days. this time im gonna make sure i dont flash a i9300 rom lol.... oops

[Q] Mobile Odin made Brick

I attempted to flash newest CWM and got a brick. The phone will not boot into any mode and I pulled the battery and held the three keys and cannot get it to boot into any mode. Is there a way to flash somehow back to stock and start over?

If you can't detect any life at all from the phone after attempting to charge it or boot into recovery or download mode then I'm sorry but your phone is now hard bricked.. There is no way to fix it unless you get a jaytag repair through mobiletechvideos.com
Sent from my SGH-T999 using xda premium

Bummed
LuigiBull23 said:
If you can't detect any life at all from the phone after attempting to charge it or boot into recovery or download mode then I'm sorry but your phone is now hard bricked.. There is no way to fix it unless you get a jaytag repair through mobiletechvideos.com
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I ordered a warranty replacement but am without a phone for a few days so I am really down that this small app was able to hard brick the darn thing. Makes no sense but I will never use Mobile ODIN ever again! Odd that no warning were there on the thread to download the tool.

photolarry said:
I ordered a warranty replacement but am without a phone for a few days so I am really down that this small app was able to hard brick the darn thing. Makes no sense but I will never use Mobile ODIN ever again! Odd that no warning were there on the thread to download the tool.
Click to expand...
Click to collapse
it does say use at your own risk.. lol I've used mobile odin before and had 0 issues. did you flash the correct cwm? anyways sucks that you got a brick. hopefully you'll get your replacement real soon

Let me see the file you flashed.

It was the touch img I downloaded
Aerowinder said:
Let me see the file you flashed.
Click to expand...
Click to collapse
I do not think I did it with wrong files. I made a tar from the img file I got from clockworkmod.com so I am sure it was clean. I am wondering if perhaps it screwed up because I had changed build.prop to say the device was "Galaxy Nexus" for Wallet to work properly. And maybe that mod I made confused it and somehow flashed something for a Nexus instead and that is why it wont function. If I had it to do again, I would have changed the build.prop back for few moments while I changed the recovery image. All of this was simply to update CWM to newest 6.0.2.8 since ROM Manager told me there was new one. I wish I had ignored it and just said no. Is there no way to hard reset this thing somehow with ODIN or a key combination that say a Samsung employee tool may "flash factory" to it? Seems odd I cannot fix this on my own. No tool nothing?

I've heard the wallet needs to be reset and all that before anything new is flashed.
I haven't flashed anything since the wallet, so I haven't looked into it yet.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 10:54 PM ---------- Previous post was at 10:50 PM ----------
photolarry said:
Is there no way to hard reset this thing somehow with ODIN or a key combination that say a Samsung employee tool may "flash factory" to it? Seems odd I cannot fix this on my own. No tool nothing?
Click to expand...
Click to collapse
Look for JTAG repair. If you can't even get it to turn on, that's what needs to be done.
It's not a home job - to tools cost several times more than the service and require more specialised knowledge.
If you can get it to turn on, look into making or buying a micro-usb jig - cheap and might work if you have time to mess around.
Sent from my SGH-T999 using xda app-developers app

Yes
Pennycake said:
I've heard the wallet needs to be reset and all that before anything new is flashed.
I haven't flashed anything since the wallet, so I haven't looked into it yet.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I am certain that is the reason I have hard brick. If I had changed build.prop....changed the recovery with mobile odin....then gone and changed it back afterwards...I am sure it would not have broken the phone. At any rate, I just will have to await warranty replacement since I get mixed readings about this MTV solution that costs almost 100 bucks.

No need to change it back. Once wallet is set up and your card activated, you can set your build.prop back to t999 and Wallet will still work perfectly, it only needs to say Nexus for the install/activation.
Sent from my SGH-T999 using xda premium

That is definitely the reason for what happened.

A little late now but this has been covered
http://forum.xda-developers.com/showthread.php?t=1928196
KCCO

Sad
bfranklin1986 said:
A little late now but this has been covered
http://forum.xda-developers.com/showthread.php?t=1928196
KCCO
Click to expand...
Click to collapse
Wish I could go back 1 day. somehow.

bfranklin1986 said:
A little late now but this has been covered
http://forum.xda-developers.com/showthread.php?t=1928196
KCCO
Click to expand...
Click to collapse
Again, if you simply change your build.prop back to the correct values for the T999 afyer you activate Google Wallet, the entire issue would be avoided and Mobile Odin should be safe to use. I know its too late for that for the OP, but hopefully someone somewhere can learn from this. :beer:
Sent from my SGH-T999 using xda premium

Does anyone have a copy of the link for the JTAG repair ? I know I've seen it before but I cant find it now
Sent from my SGH-T889 using XDA Premium 4 mobile app

Top of the development section. Can't miss it!
Sent from my SCH-I535 using Tapatalk 4

[Q] Help!!!

hello everybody
can someone help me, i was running fl24, then i wanted to update to official jb and i got and error on the manual update. What do i do so i can get this phone back in working order

Find a one click in the development forums of this phone. Put tour phone in download mode. Volume down and power. Hold both until green text comes up. Push volume up. Connect to the computer and run the one click. Btw you can find rhe one clicks on rwilcos website.
sent from my Provari with a mini rda!

Do i need to download a specific one like gb27, fl24, etc?

The one toy want to upgrade to. If your on sprint, gb27 will be the one you want (official jellybean).
Sent from my SPH-D710 using XDA Premium 4 mobile app

stevediaz said:
Do i need to download a specific one like gb27, fl24, etc?
Click to expand...
Click to collapse
Go to YouTube.. search qbking77. Watch his videos.very informative. .
Sent from my SPH-D710 using xda app-developers app

One-click works and installed gb27 then a custom rom. Now have a fully functional epic 4g touch, thank you guys.
Sent from my SPH-D710 using xda app-developers app

similar problem
hi everyone -
i have screwed up royally. after reading and reading and searching and searching (all day - my eyes are bleeding at this point)...i have decided to take a shot and post and see if there is a solution out there.
please accept my apologies ahead of time if this has been covered somewhere else, but i am at a complete loss and really need some guidance.
my phone is bricked but i have not found an exact scenario to mine.
on boot, my phone displays the same as the image above that @stevediaz posted.
i can access the download menu (cannot access restore menu) BUT my device is not recognized by any machine or by odin, so i am unable to flash anything on it and i have a steady blue LED light.
is there a work around to this? is there anything i can do to get odin/my pc to recognize my device? if i can't fix it myself i plan to send it to mobiletechvideos before i completely give up and bury my beautiful brick.
i have rooted my devices before and have never bricked a phone. i'm pretty sure i just used the incorrect rom which is a horrible terrible rookie mistake...one which i am terribly embarrassed about.
i will never make this mistake again! ever ever ever. i am looking at my beautiful phone just sitting there looking at me with accusing & accurate eyes. sighs.
if posting this here is not kosher, please let me know, but i figured since this thread is the only one i have found with a situation resembling mine, it would be a good place to start.
thanks in advance for any help offered.
Phone: Samsung Galaxy S II
Carrier: Virgin Mobile
Model: SPH-D710
PC running Windows 8

You have no choice but to get a j-tag, you screwed up the partitions and that's why it won't recognise your device and the steady blue light is a complete hard brick
Sent from my SPH-D710 using XDA Premium 4 mobile app

j3551c4 said:
hi everyone -
i have screwed up royally. after reading and reading and searching and searching (all day - my eyes are bleeding at this point)...i have decided to take a shot and post and see if there is a solution out there.
please accept my apologies ahead of time if this has been covered somewhere else, but i am at a complete loss and really need some guidance.
my phone is bricked but i have not found an exact scenario to mine.
on boot, my phone displays the same as the image above that @stevediaz posted.
i can access the download menu (cannot access restore menu) BUT my device is not recognized by any machine or by odin, so i am unable to flash anything on it and i have a steady blue LED light.
is there a work around to this? is there anything i can do to get odin/my pc to recognize my device? if i can't fix it myself i plan to send it to mobiletechvideos before i completely give up and bury my beautiful brick.
i have rooted my devices before and have never bricked a phone. i'm pretty sure i just used the incorrect rom which is a horrible terrible rookie mistake...one which i am terribly embarrassed about.
i will never make this mistake again! ever ever ever. i am looking at my beautiful phone just sitting there looking at me with accusing & accurate eyes. sighs.
if posting this here is not kosher, please let me know, but i figured since this thread is the only one i have found with a situation resembling mine, it would be a good place to start.
thanks in advance for any help offered.
Phone: Samsung Galaxy S II
Carrier: Virgin Mobile
Model: SPH-D710
PC running Windows 8
Click to expand...
Click to collapse
Does your device display a yellow triangle before the screen above and say GT-i9100? You already have the blue brick of death, so mobiletechvideos is your only hope, because right now your phone has drivers from the international version which disables the usb so the pc will not recognize it. After getting it back from mobiletech, ensure you flash something from this forum ONLY. It must be from the Epic 4G touch SPH-D710 in order to work on your phone.
---------- Post added at 04:39 AM ---------- Previous post was at 04:38 AM ----------
gamepro602 said:
You have no choice but to get a j-tag, you screwed up the partitions and that's why it won't recognise your device and the steady blue light is a complete hard brick
Sent from my SPH-D710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Damn you snuck that in fast. I was just replying to this guy and when I hit submit, this was there.

gamepro602 said:
You have no choice but to get a j-tag, you screwed up the partitions and that's why it won't recognise your device and the steady blue light is a complete hard brick
Sent from my SPH-D710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thank you for the information. i will be sending my phone in for repairs today. much appreciated. :good:
---------- Post added at 10:46 AM ---------- Previous post was at 10:41 AM ----------
noobtoob said:
Does your device display a yellow triangle before the screen above and say GT-i9100? You already have the blue brick of death, so mobiletechvideos is your only hope, because right now your phone has drivers from the international version which disables the usb so the pc will not recognize it. After getting it back from mobiletech, ensure you flash something from this forum ONLY. It must be from the Epic 4G touch SPH-D710 in order to work on your phone.
---------- Post added at 04:39 AM ---------- Previous post was at 04:38 AM ----------
Damn you snuck that in fast. I was just replying to this guy and when I hit submit, this was there.
Click to expand...
Click to collapse
ha. thank you all for the info. i don't have the yellow triangle but at this point i am sure it is hard bricked. i've contacted mobiletechvideos and i am in the process of sending them my phone.
thanks again everyone

Good to hear. Hope all goes well.
Sent from my SPH-D710 using XDA Premium 4 mobile app

and the saga continues
j3551c4 said:
thank you for the information. i will be sending my phone in for repairs today. much appreciated. :good:
---------- Post added at 10:46 AM ---------- Previous post was at 10:41 AM ----------
ha. thank you all for the info. i don't have the yellow triangle but at this point i am sure it is hard bricked. i've contacted mobiletechvideos and i am in the process of sending them my phone.
thanks again everyone
Click to expand...
Click to collapse
got the phone back...and it works, except that they installed the sprint stock rom instead of the virgin mobile stock rom as requested. researching now to flash a virgin mobile rom, but given my previous experience, safe to say i am uber paranoid.