Related
Sorry if this is a repost. But hopefully someone can help me out. I'm fully rooted, full nandroid unlock.full 100 yeards. Now this morning I was going to do the process for "Permanently replacing your recovery with ClockworkMod Recovery Image"
But for some strange reason, ADB doesn't see my Evo. I tried running "Command prompt" as administrator also and it wasa no go. I typed "adb devices" and my device wasn't listed like it was yesterday before I did a full nandroid Unlock.
Do anyone have any tips on how I can resolve this issue?
If this helps, I running the Bugless Beast Rom.
Thanks
You might have forgotten a step or two.
Open cmd
Type cd c:\android-sdk-windows\tools\ or wherever your sdk tools folder is.
Then it should work.
thanks. I'll give that a try and reply back
Strange thing....before I rooted/flashed a rom I created a Nandroid backup (I think it was stock. It doesn't have Superuser Permission in my list of Apps). Well I reverted back to that nandroid backup and now ADB sees my Evo.
I will flash back to my previous rom and trywhat you posted. Hopefully tat'll work
phatalboom said:
You might have forgotten a step or two.
Open cmd
Type cd c:\android-sdk-windows\tools\ or wherever your sdk tools folder is.
Then it should work.
Click to expand...
Click to collapse
Yeah, I tried what you suggested and itstill didn't see my Evo. I guess my only option is to revert back, then do the process.
Sometimes you need to restart the adb server. Try the following:
Code:
adb kill-server
adb shell
If you get a '#' then you're in.
I'm having same issues and it's not working. My device is not being seen. Do you I have to have the Evo in charging mode or Disk Mode?
chuckhriczko said:
Sometimes you need to restart the adb server. Try the following:
Code:
adb kill-server
adb shell
If you get a '#' then you're in.
Click to expand...
Click to collapse
or, you could just try
adb kill-server
adb start-server
lol
then check with
adb devices
seriously though, you may have put on a bad image. did you check the md5 hash? if not, do. there are threads around here on how to do that, if you are using windows. i don't have the link, because linux just has a command for it.
Try doing:
killall adb
sudo -s
adb devices
You must run adb as root on ur pc
timothydonohue said:
or, you could just try
adb kill-server
adb start-server
lol
then check with
adb devices
seriously though, you may have put on a bad image. did you check the md5 hash? if not, do. there are threads around here on how to do that, if you are using windows. i don't have the link, because linux just has a command for it.
Click to expand...
Click to collapse
Thanks for trying to help me out. But it still didn't work.
toastcfh said:
Try doing:
killall adb
sudo -s
adb devices
You must run adb as root on ur pc
Click to expand...
Click to collapse
What do you mean that I must run adb as root on my pc, i don't know what that mean. Do you mean run it by using the "Command prompt" program?
Also this only happens to me on the Bugless Beast Roms. When I revert back to my 1st nandroid backup that I was using before I flashed any rom, everything worked fine.
Is USB debugging enabled?
CentroniX said:
Is USB debugging enabled?
Click to expand...
Click to collapse
Thanks ...that fixed it! I enabled it typed "adb devices" and it showed up. thanks again!
No problem, glad you got it working! When I first started out I ran in to that trap over-and-over. Now I just make it a rule of thumb to turn it on after flashing and leave it on.
Have fun!
I would have started another thread, but this is basically a similar problem to the one I had at first with adb.
Ok...I was trying to install a rosie.apk that was in a zip format. Long story short, the OP informed me that he made a mistake and provided me the wrong information as to reinstalling the rosie.apk. He was giving me steps to "push it" via adb, instead of flashing it.
No problem to Poster and thanks for help if you reading this . But anyways after all that, When I open up "Cmd" and type anything with adb in front of it...adb devices, adb shell..., i get the message that adb is not recognized as a internal or external command. Before this incident happened i was able to just type "adb devices" and my Evo would show.
Do anyone know how to fix this?
By the way I also tried typing all the commands in the previous posts...and I get the same error message.
**Update** I got it working I had to redo the path. All is good now.
Thanks much!
You need to be in the tools directory of the sdk so cmd can find the adb command.
I have my Evo rooted with DC 3.1.1 and I also have Nand Unlock via Toasts Way. But I did all of this using Windows. I already installed Android SDK for Mac. But every time I try to execute a command after I do the cd /android-sdk/tools. It just says -bash: adb: command not found. Can anyone give me a hand?
same issue for me
nitty917 said:
same issue for me
Click to expand...
Click to collapse
If you need help. PM Me.
Use ./adb instead of adb
BearCavalry said:
Use ./adb instead of adb
Click to expand...
Click to collapse
That wont help at all.
ADB is not friendly to me. I was able to root my g1 with pure ease. I cant get started with adb, I dont know why I cant get $, I've read several guides and I'm just about to give up. I'm running 2.2 on my g2.
I do have a couple of questions:
Are rooting with rage or visionary 14 the only way to root?
Are there any root guides out there that dont require ADB?
ADB is a ****ing pain in the ass to me, especially since I've tried everything and cant get it to work. Also, the drivers that go on Win7 64bit just dont work.
Also when I do have root, can I get android updates?
Any help would be thankfully appreciated. Sorry if I'm a pain in the ass, but I'd like to know if there is an easier way.
I think you need the q&a section
Sent from my HTC Vision using XDA App
This will help u get adb working...
http://forum.xda-developers.com/showthread.php?t=865685
If you can't figure out adb, you definitely shouldn't be rooting your phone.
Some ROMS disable OTA notifications while others allow it. However, so long as you have a custom recovery, even if you get the notification and download it, you wont be able to flash it.
dictionary said:
If you can't figure out adb, you definitely shouldn't be rooting your phone.
Some ROMS disable OTA notifications while others allow it. However, so long as you have a custom recovery, even if you get the notification and download it, you wont be able to flash it.
Click to expand...
Click to collapse
while my knowledge of adb isnt stellar, I have run into problems using it. I'm going to try this new link to the guide and see if it works.
Still if anyone knows other solutions, chime in.
Try the guide linked above. The drivers in the HTC Sync package (see the guide) definitely do work on Win 7 64-bit.
Clicked on SDK Manager.exe and it gave me the attached message; anti-virus is off and bare ass minimum services are running and I added the line in variables.
Any ideas?
sorry about the ****ty pics
cwis said:
Clicked on SDK Manager.exe and it gave me the attached message; anti-virus is off and bare ass minimum services are running and I added the line in variables.
Any ideas?
Click to expand...
Click to collapse
Did you definitely add it to your path as it is suggesting in that window ? If so, I think you may need to reboot to pick that change up.
I did that just in case.
Actually, that path field was empty. So, I added it as is.
look up droid explorer
I made some leeway:
C:\Program Files (x86)\android-sdk-windows\tools>adb shell
$
$ adb push su /sdcard/su
$ adb push su /sdcard/su
$ adb: permission denied
good grief!!!!!!!
I've completely removed visionary before starting this procedure. Did I need temproot before attempting this?
Downloading and installing Droid Explorer. Thanks!
Also, I'm using this guide: http://forum.xda-developers.com/showthread.php?t=834228
No matter what I've done, permission denied.
The steps you are trying are actually to get temproot (it's an alternate method to Visionary), so you don't need to already be temprooted.
You don't want to run "adb push" commands after you have run "adb shell". ADB commands will no longer work until you exit the shell (simply type exit and hit enter---you'll notice your command prompt will change back to normal). If you are following the guide you linked to, you'll notice adb shell is not run prior to running the first push command.
ianmcquinn said:
The steps you are trying are actually to get temproot (it's an alternate method to Visionary), so you don't need to already be temprooted.
You don't want to run "adb push" commands after you have run "adb shell". ADB commands will no longer work until you exit the shell (simply type exit and hit enter---you'll notice your command prompt will change back to normal). If you are following the guide you linked to, you'll notice adb shell is not run prior to running the first push command.
Click to expand...
Click to collapse
^^^^ what he said.
You are trying to run adb on your phone there, which isn't right. That's your phone's command prompt, the "$". "adb" is something totally different on your phone. You need to run the adb commands on your PC. That's why "adb shell" worked (because you ran it on your PC), then "adb push" didn't (because you tried to run it on your phone).
steviewevie said:
^^^^ what he said.
You are trying to run adb on your phone there, which isn't right. That's your phone's command prompt, the "$". "adb" is something totally different on your phone. You need to run the adb commands on your PC. That's why "adb shell" worked (because you ran it on your PC), then "adb push" didn't (because you tried to run it on your phone).
Click to expand...
Click to collapse
I did run the commands from my pc. But still permission denied.
cwis said:
I did run the commands from my pc. But still permission denied.
Click to expand...
Click to collapse
"permission denied" is a message from your phone, not your PC.
The $ prompt that you copied and pasted up shows that you were running the commands on your phone. As soon as you do "adb shell", then any commands you are entering after that are going on your phone, even though they're physically being typed on your PC - because your PC has started a command prompt on your phone, as shown by the $ prompt.
cwis said:
I did run the commands from my pc. But still permission denied.
Click to expand...
Click to collapse
Basically, don't start by typing adb shell. The instructions you are trying to follow don't even say to do that anywhere. I highly recommend you reread the instructions very carefully and follow them exactly. Rooting this phone is actually pretty simple if you just do exactly as the guide states. If you don't know what you are doing and mistype something in some of the later steps though, you can seriously screw up your phone...
I think part of the confusion is that the commands listed on the guide all have "$" at the beginning of them, probably because whoever wrote that was using a Linux PC or maybe a Mac. You are actually executing these commands from your Windows command shell so they will look more like:
D:\Android SDK\platform-tools>adb push su /sdcard/su
Click to expand...
Click to collapse
(depending on where you have the SDK installed)
instead of:
$ adb push su /sdcard/su
Click to expand...
Click to collapse
but of course you only need to type:
adb push su /sdcard/su
Click to expand...
Click to collapse
Again these are typed from your windows command shell.
PLEASE CLOSE. ISSUE RESOLVED.
Hi everyone.
Basically I downloaded Wavesecure but it doesnt work so I need to take it off. Uninstalling the regular way doesnt work and I found a way to uninstall it by ADB commands but I have no idea how to get going.
The ADB command I need is
adb remount
adb shell rm /data/app/com.wsandroid-1.apk
I have no idea what it does either. Does it let the app become "uninstallable" through the normal settings?
So how do I give the command to the phone?
Thanks very much guys.
EDIT: nevermind, did it by removing the APK lol from root explorer.
hey this took me a few hours, i know a bit about androids and it gave me a hard time... thought i would share:
digix sophix 8" tablet root 840g
1: make sure you install your adb drivers, and your tablet is connected to your pc with usb debug mode on, and install unknown sources on.
2. goto your platform-tools adb dir and copy the attached zip files to that dir..
3. run command prompt navigate to your adb platform-tools dir
4. you could create a script, but i had to do it by hand, run these commands from your dos prompt:
Code:
adb shell mount -o rw,remount /system
adb push superuser.apk /system/app/superuser.apk
adb push su /system/bin/su
adb push su /system/xbin/su
adb shell chmod 7655 /system/bin/su
adb shell chmod 755 /system/bin/busybox
adb shell chmod 644 /system/app/Superuser.apk
adb shell chown root:shell /system/bin/su
adb shell chown root:shell /system/xbin/su
adb shell chown root:shell /system/app/Superuser.apk
adb reboot
i hope that works, cause thats all i should have had to do, and i ended up doing a ton of other things that i didnt need to... i had to re-install google apps, and market cause when i tried to root it i accidentially deleted em somehow....
but that should work.. if not.. you can understand the method of the script, and something can be worked by this im pretty sure!
my neighbor bought this tablet at gamestop.. i rooted it for him.... pissed me off for a while... it would be nice if someone could verify this... thanks!
enjoy!
Can you private message me..i really want to root my new sophix tablet... old methods are not working
does either of your tablets freeze all the time? I tried reflashing and everything went through but it still freezes
deathspankd said:
does either of your tablets freeze all the time? I tried reflashing and everything went through but it still freezes
Click to expand...
Click to collapse
I just got mine, and yeah it has frozen up a couple of times. Not all the time, but still annoying. I might return it if it keeps happening.
This is my first time rooting anything.
I have no idea what the first post means past step 1. Can I get some help?
SanguineNoir said:
This is my first time rooting anything.
I have no idea what the first post means past step 1. Can I get some help?
Click to expand...
Click to collapse
I've made a batch script that should help you. It automatically pushes Superuser and the SU binary to their proper places, fixes permissions, and reboots the device over ADB.
I haven't tested it on my father's 840G yet, so use it at your own risk, but theoretically everything should work.
jerbear294 said:
I've made a batch script that should help you. It automatically pushes Superuser and the SU binary to their proper places, fixes permissions, and reboots the device over ADB.
I haven't tested it on my father's 840G yet, so use it at your own risk, but theoretically everything should work.
Click to expand...
Click to collapse
Hey thank you so much.
However, i'm still confused/cautious.
So I got my ADB drivers from adbdriver but when I start the batch it says: Daemon not running, and then Daemon sucessfully started and then nothing. I left it for 15 minutes but nothing happened...what'd I do wrong?
SanguineNoir said:
Hey thank you so much.
However, i'm still confused/cautious.
So I got my ADB drivers from adbdriver but when I start the batch it says: Daemon not running, and then Daemon sucessfully started and then nothing. I left it for 15 minutes but nothing happened...what'd I do wrong?
Click to expand...
Click to collapse
It didn't recognize the device. How exactly did you install the drivers? It would have proceeded if they were correctly installed.
Go into ADB and type:
Code:
adb devices
If nothing comes up the tablet's not on, not plugged in, or the drivers are incorrectly installed.
Worst case scenario, download TeamViewer and I'll try to help you remotely.
SanguineNoir said:
Hey thank you so much.
However, i'm still confused/cautious.
So I got my ADB drivers from adbdriver but when I start the batch it says: Daemon not running, and then Daemon sucessfully started and then nothing. I left it for 15 minutes but nothing happened...what'd I do wrong?
Click to expand...
Click to collapse
I've linked another version of the batch in my first post in this thread. It's got a command that I believe is causing the issue commented out, as well as a bit more troubleshooting.
Also, there's a thread now that has a 15 second ADB driver installer. If the batch still doesn't work, download it here.
jerbear294 said:
I've linked another version of the batch in my first post in this thread. It's got a command that I believe is causing the issue commented out, as well as a bit more troubleshooting.
Also, there's a thread now that has a 15 second ADB driver installer. If the batch still doesn't work, download it here.
Click to expand...
Click to collapse
Yeah it's not showing up. I installed all the drivers correctly.
I'll grab team viewer and we'll just figure it out tomorrow, Reach me on skype at SanguineNoir
SanguineNoir said:
Yeah it's not showing up. I installed all the drivers correctly.
I'll grab team viewer and we'll just figure it out tomorrow, Reach me on skype at SanguineNoir
Click to expand...
Click to collapse
I would Skype you, but my mic's messed up right now. Once you grab TeamViewer, PM me the computer ID and password and I'll connect to find out what's wrong. Hopefully by then I figure out what's wrong with my mic.
sophix 840G TAB ROOT WORKS!!!!
Baidu root 2.3.9.......rooted mine an then I installed supersu for tablets off play store/ but there are no recoveries or custom ROMs for it