Related
Firstly I would like to thank bigrushdog & the ppl for the below links i quoted
I just would like to do an add on of the bigrushdog thread. Since I was a lill bit worried when 1st I flashed my SG WiFi xoom that is running 3.0.1.
There are some additional steps missing as prerequisite before using the steps on the bigrushdog thread.
WARNING: I only flashed my xoom which is a SG WiFi only xoom. I will not be responsible for any bricking. All Data Will be ERASED
In a nutshell, There will be 3 steps
[step1] Unlock
[step 2] Flash Recovery CWM
[step 3] Flash Updates
[Step 1]
Note:In System at the USB debugging options under "Settings" > "Applications" > "Development" enabled it first (thick)
1. Make sure ur honeycomb is 3.0.1
2. U need to install Android SDK and update it using the SDK Manager
-----> make sure u have updated all the SDK Platform till 3.1 API12 rev 2
3. Inside the Android SDK folder
----->Copy all the folders & files from the Platform-tools folder & Paste it inside Tools folder
4. Download the Motorola USB driver & Install it
-----> google : Motorola_End_User_Driver_Installation_5.1.0_32bit.msi (if u r running win7 32bit)
5. Connect ur Xoom to ur PC using USB Cable, wait until all drivers installed
6. Open a command prompt
-----> go to the Android SDK folder (in my case in C drive)
---------> go to the Tools folder
RUN
Code:
adb reboot bootloader
Xoom will enter Recovery mode
RUN
Code:
fastboot oem unlock
Follow the instruction to unlock ur xoom then ur xoom will reboot to factory default (Ur xoom is unlock now)
More detail instructions
-----> http://forum.xda-developers.com/showthread.php?t=967065
----------------------------
[Step 2]
1. Download ClockworkMod 3.0.2.8 Modded for Internal media
------> http://forum.xda-developers.com/showthread.php?t=1074979
------------> copy the recovery-solarnz-XXXXXX-XXXX.img to the Android SDK, Tools folder
2. On command prompt
Code:
adb reboot bootloader
fastboot flash recovery recovery-solarnz-XXXXXX-XXXX.img
fastboot reboot
[Step 3]
1. Insert MiniSD card
2. Download all the files needed in the thread to ur PC
----------> http://forum.xda-developers.com/showthread.php?t=1074609
3. On command prompt
--------> adb reboot recovery (will enter CWM)
Note that in recovery, you use the hardware volume buttons to navigate up and down, and the power button to select.
In ClockworkMod Recovery, select "mounts and storage"
Ensure your Xoom is connected to your PC via USB, then select "mount USB storage"
On your PC, copy All Files on the thread above (STEP 3) to the root of the Xoom's SDCard ("Removable Disk" in Windows)
In ClockworkModRecovery (still on the "USB Mass Storage device" screen) select "Unmount"
In the "Mounts and Storage Menu" screen, if the option "unmount /sdcard" is present, continue to the next step; if "mount /sdcard" is present, select it then continue
Select "+++++Go Back+++++"
/Select "apply update from sdcard"
Select "Yes - Install /sdcard/update.zip"
"Install from sdcard complete." will indicate that the update is completed.
DO BELOW STEPS
Code:
Step 1: Flash new recovery
Reboot System and boot back into recovery.
Step 2: Flash HC 3.1 System Update
Step 3: IMMEDIATELY flash Bootloader Patch
Step 4: Return to main menu. Do a "wipe data/factory reset"
NOTE: Your internal storage (aka /sdcard) will be safe from this wipe.
However, all other userdata will be wiped.
Step 5: Reboot
Link for above 3 files ---> http://www.mediafire.com/download.php?uis185lh7pyv74l
Hope that above helped
Now to update to 3.2
Make sure u backup first, then make sure u r using the stock kernel not any modified kernel
1. Download stock kernel ---->http://forum.xda-developers.com/showthread.php?t=1080963
we will use the xxx.img file only ....
put the xxx.img file in the same folder of /android sdk/tools
then open cmd and navigate to ur android sdk folder
reboot ur to flashboot ---> adb recovery fastboot
then use
Code:
fastboot flash boot boot.img
after done flashing reboot
2. Download update 3.2 zip file from this thread
----> http://forum.xda-developers.com/showthread.php?t=1165998
3. Follow the instruction from the above thread
1. Rename the modded Android 3.2 Update file to update.zip
2. Reboot into recovery
a. Reboot your Xoom
b. When the Motorola logo splash screen appears, press the Volume Down button to scroll through boot options and select "--> Android Recovery"
c. Press the Volume Up button to enter Android recovery
3. Perform update Note that in recovery, you use the hardware volume buttons to navigate up and down, and the power button to select. Note also if you are coming over from a custom ROM, users suggest doing a factory reset/full wipe (including user data) ClockworkMod Recovery prior to performing the following steps (read the thread for more info).
a. In ClockworkMod Recovery, select "mounts and storage"
b. Ensure your Xoom is connected to your PC via USB, then select "mount USB storage"
c. On your PC, copy update.zip to the root of the Xoom's SDCard ("Removable Disk" in Windows)
d. In ClockworkModRecovery (still on the "USB Mass Storage device" screen) select "Unmount"
e. In the "Mounts and Storage Menu" screen, if the option "unmount /sdcard" is present, continue to the next step; if "mount /sdcard" is present, select it then continue
f. Select "+++++Go Back+++++"
g. Select "apply update from sdcard"
h. Select "Yes - Install /sdcard/update.zip"
"Install from sdcard complete.ndicate that the update is completed. .
i. Select "reboot system"
You are done
Hi! Thanks for this guide.
In the thread at http://forum.xda-developers.com/showthread.php?t=1093112 I asked about this same process, and was not sure if I first needed to install the US 3.0.1 ROM after unlocking the device. In one of the replies I was told I should, but in your guide you don't have that listed.
Do I need to flash the US 3.0.1 rom first, or not?
masterslacker said:
Hi! Thanks for this guide.
In the thread at http://forum.xda-developers.com/showthread.php?t=1093112 I asked about this same process, and was not sure if I first needed to install the US 3.0.1 ROM after unlocking the device. In one of the replies I was told I should, but in your guide you don't have that listed.
Do I need to flash the US 3.0.1 rom first, or not?
Click to expand...
Click to collapse
In my case i didnt flash it .... i used the current 3.0.1 that i have on my xoom and follow the steps above
cruzzmz said:
In my case i didnt flash it .... i used the current 3.0.1 that i have on my xoom and follow the steps above
Click to expand...
Click to collapse
Was your xoom on a USA based 3.0.1, or an international 3.0.1?
Im on an SG Wifi Xoom also. Actually, I followed the instructions from BigRushDog's thread http://forum.xda-developers.com/showthread.php?t=1074609.
I was rooted and on Tiamat 1.4 before I tried doing the update. It went flawless. Just follow the 3 steps in that thread. In essence, your xoom will have the US firmware and you will have access to books.
The extra steps highlighted by OP may be a safer bet though. Im not sure.
masterslacker said:
Was your xoom on a USA based 3.0.1, or an international 3.0.1?
Click to expand...
Click to collapse
I m on international 3.0.1 i think since my xoom is a sg set
Sent from my Xoom using XDA Premium App
Anybody followed this guide on a UK WiFi? At the moment I am unlocked, but not rooted. This guide implies that you can update using CWM without root, which sounds logical, though it has been stated elsewhere that you need root :/
marky9074 said:
Anybody followed this guide on a UK WiFi? At the moment I am unlocked, but not rooted. This guide implies that you can update using CWM without root, which sounds logical, though it has been stated elsewhere that you need root :/
Click to expand...
Click to collapse
i am uk wifi and would apreciate any advice too.
OK you don't need root to install CWM, and if you get the latest 3.2.0.0 it works on the external SD card out of the box (for installation of CWM follow the instructions above). Download the lastest CWM image here:
http://forum.xda-developers.com/showthread.php?t=1074979
I followed the guide below to the letter (even step 1) to get my UK stock 3.0.1 to rooted US 3.1:
http://forum.xda-developers.com/showthread.php?t=1075260#
I did have to wipe (as I was in a bootloop), and I copied the MZ604_3.1_ROOT_update.zip file directly to the SDcard via my PC (rather than pushing or mounting the card in CWM), but apart from that it all went OK
Bonus! All my apps were restored this time (as I had to do a factory reset a few days ago d/t a 3.0.1 issue)
...also my internal SD was untouched
Edit: Only thing missing was my AutoSport app which will not let me download, so will have to sideload.
cruzzmz said:
[Step 3]
1. Insert MiniSD card
2. Download all the files needed in the thread to ur PC
----------> http://forum.xda-developers.com/showthread.php?t=1074609
3. On command prompt
--------> adb reboot recovery (will enter CWM)
Note that in recovery, you use the hardware volume buttons to navigate up and down, and the power button to select.
In ClockworkMod Recovery, select "mounts and storage"
Ensure your Xoom is connected to your PC via USB, then select "mount USB storage"
On your PC, copy All Files on the thread above (STEP 3) to the root of the Xoom's SDCard ("Removable Disk" in Windows)
In ClockworkModRecovery (still on the "USB Mass Storage device" screen) select "Unmount"
In the "Mounts and Storage Menu" screen, if the option "unmount /sdcard" is present, continue to the next step; if "mount /sdcard" is present, select it then continue
Select "+++++Go Back+++++"
Select "apply update from sdcard"
Select "Yes - Install /sdcard/update.zip"
"Install from sdcard complete." will indicate that the update is completed.
Click to expand...
Click to collapse
can not find update.zip on this step
i checked on the other thread you linked to there is not update.zip also
Sk8er Boi said:
can not find update.zip on this step
i checked on the other thread you linked to there is not update.zip also
Click to expand...
Click to collapse
Why don't you use the guide I linked to?
http://forum.xda-developers.com/showthread.php?t=1075260#
anyone tried this on japan xoom?
Sent from my HTC Desire using XDA Premium App
Sk8er Boi said:
can not find update.zip on this step
i checked on the other thread you linked to there is not update.zip also
Click to expand...
Click to collapse
there is no update.zip <--- just example only
u have to follow the steps that is in the box below it
Step 1: Flash new recovery
Reboot System and boot back into recovery.
Step 2: Flash HC 3.1 System Update
Step 3: IMMEDIATELY flash Bootloader Patch
Step 4: Return to main menu. Do a "wipe data/factory reset"
NOTE: Your internal storage (aka /sdcard) will be safe from this wipe.
However, all other userdata will be wiped.
Step 5: Reboot
cruzzmz said:
there is no update.zip <--- just example only
u have to follow the steps that is in the box below it
Step 1: Flash new recovery
Reboot System and boot back into recovery.
Step 2: Flash HC 3.1 System Update
Step 3: IMMEDIATELY flash Bootloader Patch
Step 4: Return to main menu. Do a "wipe data/factory reset"
NOTE: Your internal storage (aka /sdcard) will be safe from this wipe.
However, all other userdata will be wiped.
Step 5: Reboot
Click to expand...
Click to collapse
that was about 2 weeks about i don't remember what i have done back then i think i used update.zip from another thread any way what i ended up with a 3.1 US update and now the market and everything else thinks i'm in the US witch is so wonderful no more this app is not available for your country
the only down side i have is the boot time , it used to take around 10 seconds now my boot time loops for around 3-4 minutes i don't know if it is a general problem or now
Sk8er Boi said:
that was about 2 weeks about i don't remember what i have done back then i think i used update.zip from another thread any way what i ended up with a 3.1 US update and now the market and everything else thinks i'm in the US witch is so wonderful no more this app is not available for your country
the only down side i have is the boot time , it used to take around 10 seconds now my boot time loops for around 3-4 minutes i don't know if it is a general problem or now
Click to expand...
Click to collapse
i am still getting 10 sec to boot ... maybe u should reflash it again ... or now since u have CWM just flash with tiamat rom
Sk8er Boi said:
that was about 2 weeks about i don't remember what i have done back then i think i used update.zip from another thread any way what i ended up with a 3.1 US update and now the market and everything else thinks i'm in the US witch is so wonderful no more this app is not available for your country
the only down side i have is the boot time , it used to take around 10 seconds now my boot time loops for around 3-4 minutes i don't know if it is a general problem or now
Click to expand...
Click to collapse
If you're getting boot loops you probably need to wipe. Did you wipe as per the instructions...?
marky9074 said:
If you're getting boot loops you probably need to wipe. Did you wipe as per the instructions...?
Click to expand...
Click to collapse
yes i did , and i'm not facing a boot loops , just it takes few minutes to boot but it does in the end it doesn't stuck on the boot animation
cruzzmz;14096136
6. Open a command prompt
-----> go to the Android SDK folder (in my case in C drive)
---------> go to the Tools folder
RUN
[code said:
adb reboot bootloader
[/code]
Xoom will enter Recovery mode
Click to expand...
Click to collapse
This doesn't work when you have not set the USB debugging options under "Settings" > "Applications" > "Development". FYI. It got me when I followed your guide.
It will say device not found.
skyro said:
This doesn't work when you have not set the USB debugging options under "Settings" > "Applications" > "Development". FYI. It got me when I followed your guide.
It will say device not found.
Click to expand...
Click to collapse
Thank you for bringing this up ... forget to mention this
Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Since you are already rooted.... I'll keep it simple. You can backup your ROM in ROM manager.
Boot to CWM
Wipe data (wipes cache too)
Go to advanced, wipe Dalvik
Flash AOKP
Flash GAPPS
Reboot
Flash kernel if you are using a modified one. If you flash a kernel after you boot, just wipe dalvik.
Flukester69 said:
Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Click to expand...
Click to collapse
You don't have to flash through "Rom Manager" its much easier in ClockworkMod Recovery (assuming you have it installed, check at the top of Rom Manger to see if you have the latest recovery). To get there, you just have to hold down "Power + Volume Up + Volume Down," when you're there, you can move up and down with your volume up/down buttons and press "enter" with the power button. From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset), and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set.
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
You must have flashed ClockwordMod Recovery already... at the top in the Rom Manager application where it says Flash ClockwordMod Recovery, it should have something saying "Current Recovery: 5.5.0.4" and "Latest Recovery 5.5.0.4." Make sure your current and latest match up. If they do, then you already have CWM installed. Then you can boot into it from the instructions I provided in my post above (turn off phone, hold down power + volume up + volume down).
AOKP has a kernel, you can choose to download and flash a separate kernel if you want.
The rom backups go to your virtual SD card, and will not get wiped when you do a data wipe, so they are secure (i.e. you don't have to put them on your computer if you don't want to).
anton that makes sense mostly but..
"and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set."
If I
"From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset)"
Wouldn't that mean there would be nothing on the SD card to flash with?
Flukester69 said:
anton that makes sense mostly but..
"and flash your Rom/Gapps (install zip from sdcard --> choose zip from sdcard --> download --> find your rom/gapps). You should reboot after that, and it'll be set."
If I
"From there you can create a backup (backup and restore --> backup), wipe data/cache/dalvik (wipe data/factory reset)"
Wouldn't that mean there would be nothing on the SD card to flash with?
Click to expand...
Click to collapse
No. Wiping data/cache/dalvik does not touch SD Card contents.
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
Yes, CWM is the recovery. Flashing CWM only flashes it to your phone, you still have to boot into it.
Don't wipe or anything from Rom Manger, that's an option that I don't recommend. From Rom Manager you can boot to CWM, do that and do the above I posted. You should be fine.
Just remember, do a factory reset, wipe dalvik, flash new ROM, then flash GAPPS. After that you are good. First boot will take some time.
You need to format /system too. It's under Mounts and storage.
Flukester69 said:
Is there more n00b friendly instructions than this to install AOKP? Sorry I am a former Blackberry owner, I am a little nervous but I am tech savvy. I just don't want to brick my phone..
My phone is rooted.. I have the latest AOKP and gapps from the AOKP site.
1. Make sure you're on the latest CWM
2. MAKE A NANDROID
3. wipe data/factory reset in recovery
4. flash ROM
5. flash Gapps
6. reboot
=
1. I have the latest ROM manager.
2. No idea what or how to use it... (I did a full backup with Galaxy Nexus Root Toolkit, good enough?)
3. Is this done in the ROM manager, I think so, or when I am in bootloader mode maybe?
4. Flashing it I assume with ROM manager, pick the zip and voila..
5. No idea about this one. With ROM manager too?
6. Dah.. I think I can handle this step..
Appreciate any help.. remember n00b, never had an android and never did anything with my BB. N00b. Thanks!
Click to expand...
Click to collapse
Ok this is what you need to do.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
Step 2: In ROM Manager select "Reboot into Recovery". It will reboot and you will see the Google splash screen then a black page with blue text. If you see this proceed to step 3.
Step 3: use the volume keys to navigate to the option "Backup and Restore". When you have highlighted this option use the power button to select it. You will then a select "backup". Let it do its thing (will take a few minuets). When its done it will return you to the first screen then continue to step 4.
Step 4: Select "wipe data/factory reset". You will be taken to a screen with a bunch of "no"s and one "yes" if you are sure you want to wipe then select "yes" and let it do its thing. When its done it will return you to the main menu. Proceed to step 5.
Step 5: Select "install zip from sdcard". Select "choose zip from sdcard". Browse the ROM file. Select it and you will be at the no no no... yes screen. Select "yes" and let it do its thing. When its done you will be taken to the screen that says "choose zip from sdcard". Select that option again and browse to the gapps file. Flash it like the ROM. When you are done it will take you to the "choose zip from sdcard" screen. From there select "*****Go Back*****" then Select the first option "reboot system now". Your phone will now reboot. Note that it will take a lot longer than usual.
Also note that navigating CMR is a pia because the volume keys are jumpy.
Enjoy...
Flukester69 said:
Ok that's cool..
few questions.. boot to CWM is that the recovery manager on my phone? or Do you mean select in ROM manager "Flash ClockworkMod Recovery"
Go to advanced, wipe Dalvik, I expect that is an option when phone is booted. I don't see that in ROM manager.
Flash Kernel? Now I'm kinda confused. I thought AOKP has the kernel, am I using a modified one? Uh, I just unlocked and rooted this with GNR Toolkit nothing else.
Another question I am curious in ROM manager, where do these rom backups go? Should I not put those on my pc hd somewhere safe?
Click to expand...
Click to collapse
1. In Rom Manager, select back up and restore. This creates an exact back up of what your phone has on it and the settings.
2. In Rom Manager, select reboot in recovery. Using the volume rocker to move to wipe/data factory reset. Select option with power button. When that is complete, select install zip from sd card. Select the AOKP Rome file and flash it. Select install rom from sd card a second time and flash the Gapps (google app pack). The reboot phone.
Wiping dalvik is little redundant IMO, most custom Roms are including scripts to wipe automatically.
Since you did a factory reset (a must when changing Roms), you will need to set your phone back up.
You will leave your back up of your sd card as this is the only way you can restore via Rom Manager.
When you flash the rom, it will come with the kernel. Some prefer different kernels and will flash those as well. I have used kernels by Heyitslou since my Incredible days and flashed his V3 defiant with AOKP. It can be found on Rootzwiki.
Ok guys, many thanks. I think I got enough info.
@mentose457 I got the ROM manager installed and under CWM recovery the current and latest do match up. Do I still need to do that?
That is what I was looking for a n00b guide. Hehehe! Thanks everyone I will study those instruction and try this out.
Appreciate your help and patience guys..
mentose457 said:
Ok this is what you need to do.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
Step 2: In ROM Manager select "Reboot into Recovery". It will reboot and you will see the Google splash screen then a black page with blue text. If you see this proceed to step 3.
Step 3: use the volume keys to navigate to the option "Backup and Restore". When you have highlighted this option use the power button to select it. You will then a select "backup". Let it do its thing (will take a few minuets). When its done it will return you to the first screen then continue to step 4.
Step 4: Select "wipe data/factory reset". You will be taken to a screen with a bunch of "no"s and one "yes" if you are sure you want to wipe then select "yes" and let it do its thing. When its done it will return you to the main menu. Proceed to step 5.
Step 5: Select "install zip from sdcard". Select "choose zip from sdcard". Browse the ROM file. Select it and you will be at the no no no... yes screen. Select "yes" and let it do its thing. When its done you will be taken to the screen that says "choose zip from sdcard". Select that option again and browse to the gapps file. Flash it like the ROM. When you are done it will take you to the "choose zip from sdcard" screen. From there select "*****Go Back*****" then Select the first option "reboot system now". Your phone will now reboot. Note that it will take a lot longer than usual.
Also note that navigating CMR is a pia because the volume keys are jumpy.
Enjoy...
Click to expand...
Click to collapse
Damn, you typed faster than I did!
spence341 said:
Damn, you typed faster than I did!
Click to expand...
Click to collapse
Hahaha he did.. great help all of you. I'm 99% there in terms of confidence here.
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
I don't see anything in ROM Manager that specifically says install CMR (first option). First option is Flash ClockworkMod Recovery and it has a latest and current ...5.5.0.2
When I unlocked and rooted I had installed ROM Manager etc and I see a current and latest... they are the same... blah blah blah 5.5.0.2. Do I still need to do this step?
Flukester69 said:
Step 1: Open ROM Manager and install CMR (first option). You need to make sure you select the correct version of your phone (verizon is CMDA all others are GSM, I think). After it is finished installing proceed to step 2.
When I unlocked and rooted I had installed ROM Manager etc and I see a current and latest... they are the same... blah blah blah 5.5.0.2. Do I still need to do this step?
Click to expand...
Click to collapse
No, if current and latest are the same, then you're fine and you can move on to the next step.
Errm.. I used ROM Manager I selected Backup rom, i see the android guy and see files backing up. Which turns out to be the same as your step 2 and 3. LOL! hopefully multiple backups dont hurt. LOL I'm currently finishing step 3 I guess. Next is wipe etc.
No offense to guy who did rom, but a Pink unicorn with rainbow hair.... err
No offense but generally speaking a macho guy like me hopes nobody will see a pink unicorn on his android phone. Haha!
Thanks guys, I am restoring my apps now and I think I am good. Really appreciate your help! Can't wait to try this ROM out!
Flukester69 said:
Thanks guys, I am restoring my apps now and I think I am good. Really appreciate your help! Can't wait to try this ROM out!
Click to expand...
Click to collapse
A lot of people report problems restoring Apps+Data using Titanium Backup, so I recommend only restoring the App part and not the Data part if you want to have the least amount of FCs. Unless you're restoring from market... then disregard this post. =P
Hi
I want to install a custom rom, however they say at the next custom rom: Install via recovery!
They mean the same here as how you would install the following custom rom:
So http://forum.xda-developers.com/showthread.php?t=1673489
through Backup and Restore and then choose Restore.
Or they mean that you have to look to the .zip file on your SD, so as the next method.
what they mean exactly with http://forum.xda-developers.com/showthread.php?t=1786871
So in a nutshell what they mean exactly with: install via recovery!?
Thanks
http://www.addictivetips.com/mobile...-and-how-to-use-it-on-android-complete-guide/
cashher said:
Hi
I want to install a custom rom, however they say at the next custom rom: Install via recovery!
They mean the same here as how you would install the following custom rom:
So http://forum.xda-developers.com/showthread.php?t=1673489
through Backup and Restore and then choose Restore.
Or they mean that you have to look to the .zip file on your SD, so as the next method.
what they mean exactly with http://forum.xda-developers.com/showthread.php?t=1786871
So in a nutshell what they mean exactly with: install via recovery!?
Thanks
Click to expand...
Click to collapse
Usually by recovery it is meant CWM recovery. As seen bellow, steps from 2 to 6.
Installation Instruction
This ROM works on Locked and Unlocked Bootloaders. Its a Flashable ROM.
0. Charge Phone 100% (optional)
1. Flash Kernel for ICS ROMS (e.x. arcknight)
2. Boot to CWM
3. Factory Reset
4. Mounts & Storage ---> Format System
5. Advanced ----> Wipe Battery Stats (optional)
6. Install Zip from sd card ----> Choose Zip from sd card ----> Xperia Ice Bean 4.X
7. Reboot, wait for booting, than reboot again (optional)
This is my first time rooting a device so I'm not sure what I'm doing but I have unlocked the bootloader and am trying to use the HTC quick root tool and also have the clockwork mod installed. When I try to root using the universal exploit on this program I get:
Checking device connection... device connected
preparing universal exploit... okay
rebooting to recovery... okay
waiting for device... okay
running universal exploit... okay
rebooting device... okay
waiting for device... okay
checking TEMP ROOT access... failed
error universal exploit failed
any ideas?
Easy Ace Root Tool.
Huh, you have CWM already installed that means you only need to flash Superuser or a custom rom.
1. download the zip file here : http://forum.xda-developers.com/showthread.php?t=1538053
2. Put the ZIP file in your SD.
3. Reboot into CWM Recovery
4. Choose install from ZIP.
5. Find your zip file
6. Install it.
8. Reboot and your done!
Installing a custom rom :
1. Download a custom rom (1000 of Roms on XDA search the developer section)
2. Extract the boot.img
3. Save it somewhere
3. Place the zip file in tour SD
4. Reboot in CWM
5. Install the ROM in tour SD with Install from zip
6. Reboot in Bootloader
7. Open CMD and type in : /fastboot flash boot.img (Depends on where you have saved it, fort example if you saved it on C:/ type in /fastboot flash C:/boot.img)
8. Reboot and your done!
Fantassy123 said:
Huh, you have CWM already installed that means you only need to flash Superuser or a custom rom.
1. download the zip file here : http://forum.xda-developers.com/showthread.php?t=1538053
2. Put the ZIP file in your SD.
3. Reboot into CWM Recovery
4. Choose install from ZIP.
5. Find your zip file
6. Install it.
8. Reboot and your done!
Installing a custom rom :
1. Download a custom rom (1000 of Roms on XDA search the developer section)
2. Extract the boot.img
3. Save it somewhere
3. Place the zip file in tour SD
4. Reboot in CWM
5. Install the ROM in tour SD with Install from zip
6. Reboot in Bootloader
7. Open CMD and type in : /fastboot flash boot.img (Depends on where you have saved it, fort example if you saved it on C:/ type in /fastboot flash C:/boot.img)
8. Reboot and your done!
Click to expand...
Click to collapse
cheers I'll try that now and let you know
EDIT: It worked thanks!
db316 said:
cheers I'll try that now and let you know
EDIT: It worked thanks!
Click to expand...
Click to collapse
have some trouble flashing the custom ROM. When I boot to bootloader, should I select fastboot and then connect to pc? because when i type /fastboot flash C:/boot.img i get this:
c:\>/fastboot flash C:/boot.img
'/fastboot' is not recognized as an internal or external command,
operable program or batch file.
1.Unlock your bootloader and flash a custom recovery (CWM or 4ext)
2.Download the rom zip file you are willing to flash to your PC.
3.Extract the the boot.img from inside the zip file (do not extract the whole rom)
6.Put the zip file in your sdcard.
5.Boot into recovery and do a full wipe (wipe data/factory reset, wipe cache partition, format system)
6.Flash rom (install zip from sdcard)
7.Reboot into bootloader again and plug the phone to the PC.
8.You need to be in fastboot usb (if you see HBOOT USB PLUG in the phone, just press power to toggle)
9.Open a cmd/terminal and navigate to where the boot.img file is located.
10.Type: fastboot flash boot boot.img
11.Reboot and now you should be enjoying your custom rom
Here is a better explained instruction for flashing custom rom's on DHD
Fantassy123 said:
1.Unlock your bootloader and flash a custom recovery (CWM or 4ext)
2.Download the rom zip file you are willing to flash to your PC.
3.Extract the the boot.img from inside the zip file (do not extract the whole rom)
6.Put the zip file in your sdcard.
5.Boot into recovery and do a full wipe (wipe data/factory reset, wipe cache partition, format system)
6.Flash rom (install zip from sdcard)
7.Reboot into bootloader again and plug the phone to the PC.
8.You need to be in fastboot usb (if you see HBOOT USB PLUG in the phone, just press power to toggle)
9.Open a cmd/terminal and navigate to where the boot.img file is located.
10.Type: fastboot flash boot boot.img
11.Reboot and now you should be enjoying your custom rom
Here is a better explained instruction for flashing custom rom's on DHD
Click to expand...
Click to collapse
awesome done it thanks so much
1. Download resources:
a. Download the rom UL USER, leave it there and do nothing to it yet.
b. Download the twrp.zip file https://mega.nz/#!l8BXgaDL!Y1AH5TM9jKI5r6LtEKFN_4Po105glHNR602yVDipfF8 (if you still have twrp installed beforehand)
c. Magisk 20.0 https://github.com/topjohnwu/Magisk/releases/download/v20.0/Magisk-v20.0.zip
2. Proceed:
Do not update the UL USER rom from the device's interface (SYSTEM UI), power off, boot into TWRP. Select install zip in the following order:
a. Rom UL USER
b. Twrp.zip
c. Magisk v20.0 (or exit the main menu, select Advanced, install root also)
Done, exit the main menu select advanced wipe, wipe cache, dalvik.
Reboot the device.
Done.
By chicken
This did not completely work for me going from .35 to .64. All the steps completed successfully but when I rebooted the phone, Magisk was not installed so I didn't have root. I was able to then boot to TWRP and successfully install Magisk, but I don't know why it didn't work the first time. Anyone else try this? Did it work as intended for you?
One other thing I noticed - TWRP no longer has an option to wipe the cache under wipe > advanced, only for Dalvik/ART cache. Why?
Wish I would have tried this before i updated and lost root, i flashed a root boot.img with fastboot now im bricked and don't know what to do.
EDIT: got twrp did a factory reset and im in now.
dungnghien said:
1. Download resources:
a. Download the rom UL USER, leave it there and do nothing to it yet.
b. Download the twrp.zip file https://mega.nz/#!l8BXgaDL!Y1AH5TM9jKI5r6LtEKFN_4Po105glHNR602yVDipfF8 (if you still have twrp installed beforehand)
c. Magisk 20.0 https://github.com/topjohnwu/Magisk/releases/download/v20.0/Magisk-v20.0.zip
2. Proceed:
Do not update the UL USER rom from the device's interface (SYSTEM UI), power off, boot into TWRP. Select install zip in the following order:
a. Rom UL USER
b. Twrp.zip
c. Magisk v20.0 (or exit the main menu, select Advanced, install root also)
Done, exit the main menu select advanced wipe, wipe cache, dalvik.
Reboot the device.
Done.
By chicken
Click to expand...
Click to collapse
In my experience after install back twrp reboot back to recovery (twrp) before flashing magisk .
Does this work when updating to A10?