Develop Bugs

How to conect MDA3 to pc via WIFI?

helo
I want to connect my Mda3 to PC via WIFI and share my internet connection.. sadly I don't have an access point, only wifi card in pc so I need to connect id ad hoc mode + i have a static IP on my current internet connection.. My connection should look like this:
ISP-> router di-604->pc lan->pc wifi (via connectoin sharing on the same pc)->ppc
but I have no idea how to configure it.. anyone can help?
im using WinXP Pro, SP2, wifi card dwl-g520+ and mda with i-mate 1.40 WWE rom
sorry for bad english
edit
i have a pc<->ppc connection and I can access activesync via wifi but still no internet on ppc

Tilt 2 as modem

I recently change my BB for a Tilt 2 but I haven't figure out how to use it as a dial up modem as I did with my BB are there any software or driver available for vista 64
Ive downloaded some driver but no luck!! any help will be apreciated!

internet search please:
http://forum.xda-developers.com/showthread.php?t=338003

I'm trying to use the phone as a dial up modem those instruction are for data sync any other suggestion

Welcome to forums
Have a deep read here:
http://forum.xda-developers.com/showthread.php?t=407563
Read, Search, Respect and Enjoy!

Well after reading the last thread I'm still having problems my notebook doesn't recognize the phone as a standard modem I've installed various vista drivers found on other threads still no luck!!
os windows vista 64

im using vista64. it shouldnt matter which version you are using because drivers are automatically installed when you connect via usb. when i first plugged in my tp2, it automatically set everything up. dont try to configure the modem crap in MyComputer, but rather just hook up via the internet sharing app on the tp2 or if your laptop supports wifi, enable wifi on your tp2 and search for the signal on your laptop. the above mentioned forum topics should have more than helped. its easier than you make it bro. btw, are your carrier internet settings correct? here are settings for Tmobile and ATT. hope this helps.

For sure give this thread a read: Wifi Internet Sharing
It's the easiest way to turn your phone into a router and get internet on your laptop. That said, if your laptop or desktop isnt wifi enabled then you'll just have to teather it using "internet sharing" I havn't seen a rom yet (even my stock ATT rom had it I believe) that doesn't have internet sharing built into it as a standard option in the com manager or in the connections settings.

if you dont have the internet sharing app, its HERE in this thread

This most be very disappointing for all of you that have tried to help me on this issue but I'm still having problems...
List of things tried already
1. Installed internet sharing but cant get the phone to connect via usb, the wifi recieve data I've tried the phone on my home network without sim card and it browses the net without problems but can't use it as a router with or without the sim card
2. Follow the att instructions but my phone has the media net setting locked and I can't edit them
"Media Net This connection is pre configure. It cannot be modify'
3. installed all kind of drivers still not recognized as a standard modem
Last drivers instaled was using wmdriverinstaler
Even gone to you tube!!
Toshiba satellite a305 wifi enabled
vista home premiun 64
att tilt 2 rom1.59.502.3 rom date 9/25/09 wm6.5
CE OS 5.2.21849 build 21849.5.0.63
att $30 unlimited data plan ("no thethering" din't need it with the blackberry since it work as a dial up modem)
I wont give up I like this htc better than my BB curve!!!
Is it a rom issue?
Drivers issue?
att plan that has to upgragded to tehter "won't go there"
Unlocking the phone?
Thanks!!

Have you tried connecting the laptop to the phone via Bluetooth (if you have that option on your laptop)? I was trying to get Internet Sharing going this way, and once I paired the two, I got an option to use the phone as a dial-up modem, rather than just sharing the phone's ATT data connection (which sounds like exactly what you are looking for). For some reason, I got this option when I connected via Bluetooth, and not USB. Also, I'm using XP, and not Vista, so I don't know if that will change the options.

quiquerc said:
This most be very disappointing for all of you that have tried to help me on this issue but I'm still having problems...
List of things tried already
1. Installed internet sharing but cant get the phone to connect via usb, the wifi recieve data I've tried the phone on my home network without sim card and it browses the net without problems but can't use it as a router with or without the sim card
2. Follow the att instructions but my phone has the media net setting locked and I can't edit them
"Media Net This connection is pre configure. It cannot be modify'
3. installed all kind of drivers still not recognized as a standard modem
Last drivers instaled was using wmdriverinstaler
Even gone to you tube!!
Toshiba satellite a305 wifi enabled
vista home premiun 64
att tilt 2 rom1.59.502.3 rom date 9/25/09 wm6.5
CE OS 5.2.21849 build 21849.5.0.63
att $30 unlimited data plan ("no thethering" din't need it with the blackberry since it work as a dial up modem)
I wont give up I like this htc better than my BB curve!!!
Is it a rom issue?
Drivers issue?
att plan that has to upgragded to tehter "won't go there"
Unlocking the phone?
Thanks!!
Click to expand...
Click to collapse
which rom are you using?

ok so if you are using the stock rom, why cant you connect? your settings are automatically set up on a stock rom. you must have done something in the connections settings to screw up your connection. just reflash the stock rom.

Well thanks for all the help and suggestions but the problem was the actual phone
I went to ATT and changed the unit and now it works fine I was able to connect via internet sharing using wifi apparently there was hardware failure with my original tilt
Thanks you for all your help!!!

[Q] How to share internet via Wireless tethering

Hello, help me to resolve one problem. Do you possible to use internet via USB from my computer and how to share via tethering this USB internet. Under Android but I search method under Windows Mobile. In device setting I find only share GPRS/3G internet via wifi, but not found share another source.
Sorry for my bad english.

[GUIDE] Iconia A100 ROOT and AD-HOC wi-fi enabled

Hi everybody. I've bought my A100 one month ago and i've rooted and added ad-hoc patch for it in order to have internet through wm cellphone.
i've rooted with this guide
androidforums.com/iconia-tab-a100-all-things-root/401598-rooting-a100.html
and added ad-hoc with this one:
batista70phone.com/2011/05/supporto-per-reti-ad-hoc-su-acer-iconia-a500/ (is in italian, if you need english tell me, I can translate it)
To avoid problems open the page from the tablet and copy/paste the commands, and remeber to SWITCH OFF WIFI AS SOON AS POSSIBLE before playing with the wifi files!!
I've also added to my winmo phone ( diamond ) WMWifiRouter in orde to share the connection from 3g on the phone to wi-fi on the tablet.
Everything works. You have only to start WMWiFiRouter on diamond or other wm6 device and than looking in the wifi list on tablet for the wireless just created ( Office Lan....etc ).
For convenience activate on cellphone "wifi always on" also if "display is off" trough Diamond Tweaks.
I hope this can be useful for someone else ;-)

English guide for enabling ad-hoc
I would greatly appreciate it if you would translate the guide for enabling ad-hoc capabilities for the a100. I can't seem to find a guide anywhere else and, alas, I don't speak Italian. Thank you so much!
-Sean
EDIT: if it is easier, you can send it to my E-mail ([email protected])

Sean Foster said:
I would greatly appreciate it if you would translate the guide for enabling ad-hoc capabilities for the a100. I can't seem to find a guide anywhere else and, alas, I don't speak Italian. Thank you so much!
-Sean
EDIT: if it is easier, you can send it to my E-mail ([email protected])
Click to expand...
Click to collapse
I used this site to translate it to English.
http://translate.googleusercontent....033314&usg=ALkJrhhTGzTt752dLWUy168U5FSsyzNFZA
It pointed back to an XDA thread that pointed back to this post. http://forum.xda-developers.com/showthread.php?t=1033314
It should be enough to get you going.
Edit:
I am not going to spoon feed and send it to your email.

still having problems with ad hoc access
i followed the instructions to root the tablet. this worked fine. i then followed instructions to replace the wpa_supplicant file with the one found on this forum for the motorola xoom that is meant to give ad hoc capabilities. i know the file replaced fine as the way the a100 behaves with regards wireless has changed. before there seemed to be a bug that it would always turn off the wireless when the screen went off no matter what the wireless behavior settings were. now it never turns off wireless even if the screen goes off.
if i set up a wireless network from my laptop using the intel My Wifi software if connects fine with WPA, it did this out the box. however if i set up an ad hoc netork on my laptop it will not connect correctly.
1. If I use WPA it just keeps saying connecing ---disconncted repeatedly
2. If I use WEP or no encryption it gets to the point of obtaining an ip address but never gets any further.
I have only tried with DHCP
Also with the ad hoc network it seems to make multiple networks in the wireless networks on the tab.
I was hoping someone could give me some specific help on this and maybe some up to date advice on the usbb host issue.
Thanks in advance.

thanks for your help yes it seems i am the only one who is still having problems! i am working on a ship now and maybe the server here is causing issues. i will be home tomorrow and can try then.
when you set up your ad hoc in windows do you select WPA or WEP, funny I thought ad hoc only had WEP security. why does w7 offer WPA on ad hoc?
thanks andy

thanks I tested at home. Still can't connect with adhoc on my laptop with wep wpa or no authentication but works fine on my huwei e585 which is a bit of a mystery I will try and fine another laptop to test it with.....thanks for your support though.......do you know any solution to the USB host issue on the a100?

hi there is another issue with the a100 i was hoping to solve. you cannot mount a usb device like a thumb drive on it. the a500 had a standard pc type usb port and you could mount a usb drive on it. although you can get a mini usb male to ubs female 'usb on the go' cable apparently it wont work on the a100. i have seen some feedback regarding this on blogs but no solutions. any ideas? Andy

ad hoc again
hi again...have juts discovered that my huwei e585 modem actually provides infrastructure not ad hoc which is why my a100 tablet works with it. i think i still have a problem with ad hoc on my a100. i went through the process of getting the new wpa_supplicant file in /system/bin and i checked it has the same permisions as the original file but still no luck...can anyone help? I still cant connect my a100 to an ad hoc network provided by my laptop.

yes, i used root explorer to copy the wpa_supplicant and I made sure I had the airplane mode on and wireless off when I did it.I just tried the whole process again and the same result. my a100 has android 3.2. I also made sure the permissions are exactly the same as the original file.
Andy

Hello. I am an Android newb. I have been trying to correct this issue for over a week to no avail. Please advice.
I've tried rooting my A100 by inputting (copy/paste) the proper commands on the a100 itself in a terminal emulator, but have had no success. The commands cause no obvious response when entered into the terminal, but when I checked xbin for su, it's there. I've installed the superuser apk, but busybox install fails due to lack of root. Repeating the process doesn't change anything.
I've also tried rooting via the ADB method. The results are the same. su is in xbin folder; however, I cannot install busybox because I am not rooted.
The last bit of info I can provide about my situation is this. I have root checker installed on my A100. I do not get the same result each time I click "verify root". Sometimes it tells me that I'm rooted and sometimes it tells me that I'm not rooted????
Please let me know if I can provide any additional information. I need some help please.

JusThinK said:
Execute the commands fropm terminal emulation.
/system/bin/cmdclient ec_micswitch '`mount -o remount,rw /system`'
/system/bin/cmdclient ec_micswitch '`cat /mnt/sdcard/su >/system/xbin/su`'
/system/bin/cmdclient ec_micswitch '`chmod 6755 /system/xbin/su`'
NOTE: You must have to copy moded su to your sd card , /mnt/sdcard
@Sent from My Acer Iconia A100
Click to expand...
Click to collapse
These are the same commands that I have previously entered via terminal emulator and I tried again via ADB method. I have tried multiple times.
I'm not sure what you mean by "You must have to copy moded su to your sd card , /mnt/sdcard". Are you referring to the su file in my xbin folder? If so, I cannot copy it because I am not rooted. Every time I execute the aforementioned commands, the su file in my xbin folder gets modified. The size of the su file in my xbin folder is 0.00K, is this normal?
Thanks for responding, please offer further guidance if you can.

hi i am no expert but i got the root to work fine with these instructions. as long as you copied the new su file to your xbin folder the third command on the list should take care of everything.
then you have to do the busybox and super user thing
Step 6: Install BusyBox from the Market
Step 7: Install SuperUser from the market, this is the APK version this time. This is going to update the SU file and install the SuperUser app.

thanks i got it now

Hi,
I just brought my new acer iconia a100 model 3 weeks ago.I want to ask if it is ok to use the 3g connection of samsung galaxy y in the iconia.Also i want a english translation for the ad hoc for easy understanding.can you email me at [email protected] for the answer.I'll wait for your answer.
Thank you.
andreagragnato said:
Hi everybody. I've bought my A100 one month ago and i've rooted and added ad-hoc patch for it in order to have internet through wm cellphone.
i've rooted with this guide
androidforums.com/iconia-tab-a100-all-things-root/401598-rooting-a100.html
and added ad-hoc with this one:
batista70phone.com/2011/05/supporto-per-reti-ad-hoc-su-acer-iconia-a500/ (is in italian, if you need english tell me, I can translate it)
To avoid problems open the page from the tablet and copy/paste the commands, and remeber to SWITCH OFF WIFI AS SOON AS POSSIBLE before playing with the wifi files!!
I've also added to my winmo phone ( diamond ) WMWifiRouter in orde to share the connection from 3g on the phone to wi-fi on the tablet.
Everything works. You have only to start WMWiFiRouter on diamond or other wm6 device and than looking in the wifi list on tablet for the wireless just created ( Office Lan....etc ).
For convenience activate on cellphone "wifi always on" also if "display is off" trough Diamond Tweaks.
I hope this can be useful for someone else ;-)
Click to expand...
Click to collapse

will this still work with ics?
Sent from my SCH-I500 using xda premium

I tried the opening poster's ad-hoc fix on my iconia a100 ICS leak, and it worked great. This is where the instructions are (in italian, but translated by google, it was understandable) Now I can get wifi from my jailbroken iphone 3gs with mywi app.
batista70phone.com/2011/05/supporto-per-reti-ad-hoc-su-acer-iconia-a500/
I did notice that the status bar icon that shows wifi doesn't seem to be showing signal strength properly.

marcusjbid said:
I did notice that the status bar icon that shows wifi doesn't seem to be showing signal strength properly.
Click to expand...
Click to collapse
Yeah, personally I have solved this issue with this wpa_supplicant, extracted from taboonay a500 rom.. I hope it can be usefull!

mugna91 said:
Yeah, personally I have solved this issue with this wpa_supplicant, extracted from taboonay a500 rom.. I hope it can be usefull!
Click to expand...
Click to collapse
Hey, thanks works great
Sent from my A100 using XDA

Anyone have another supplicant file I could try? After the latest upgrade OTA, I can't connect to my iPhone's ad-hoc anymore.
Sent from my A100 using XDA

Never mind, its working now.
Sent from my A100 using XDA

[Q] Need help with kali linux in android! Please!

Im trying to enable moniter mode for wlan0 but it says error while getting interface flags: no such device.
Can anyone help me fix this problem. I have an htc one m8 and run android 4.4.2. The wireless router box is from smc networks. Also how would I find more specific information on my wireless adaptor to see if it works with kali linux? I really want to get aircrack-ng working on my htc. I used the command airmon-ng start wlan0. Ive uploaded a picture to make things more clear.

well first of all your internal WiFi card probably doesn't support features like promiscuous mode or packet injection, and even if it did, android lacks the firmware and drivers to support that functionality. the only way you would be able to run the aircrack-ng suite is to use an external WiFi adapter with a chipset that does support packet injection, like rtl8187 or ath9k. then you would need to add the firmware and enable support for the drivers in the kernel. and finally, android has it set to force the onboard WiFi card be in control and automatically disable others, so you would have to find a way to disable the onboard card too (this one I can help you with - just set the network manager in Kali to managed mode on so Kali takes over managing the WiFi settings - so you can just write a script to run when Kali boots to enable managed mode and disable it when you sign off).
Sent from my One using XDA Free mobile app
---------- Post added at 01:14 PM ---------- Previous post was at 01:09 PM ----------
if you just want to do packet sniffing you can get a RTL8187 USB card and hook it up to an OTG adapter, then install the PCAP Capture app from kismet in the play store. that let's you use monitor mode in android but only with that card.
also when you run airmon-ng you need to kill the wpa_supplicant, NetworkManager, and dhclient processes as they can interfere with it.
Sent from my One using XDA Free mobile app

eudemonics said:
well first of all your internal WiFi card probably doesn't support features like promiscuous mode or packet injection, and even if it did, android lacks the firmware and drivers to support that functionality. the only way you would be able to run the aircrack-ng suite is to use an external WiFi adapter with a chipset that does support packet injection, like rtl8187 or ath9k. then you would need to add the firmware and enable support for the drivers in the kernel. and finally, android has it set to force the onboard WiFi card be in control and automatically disable others, so you would have to find a way to disable the onboard card too (this one I can help you with - just set the network manager in Kali to managed mode on so Kali takes over managing the WiFi settings - so you can just write a script to run when Kali boots to enable managed mode and disable it when you sign off).
Sent from my One using XDA Free mobile app
---------- Post added at 01:14 PM ---------- Previous post was at 01:09 PM ----------
if you just want to do packet sniffing you can get a RTL8187 USB card and hook it up to an OTG adapter, then install the PCAP Capture app from kismet in the play store. that let's you use monitor mode in android but only with that card.
also when you run airmon-ng you need to kill the wpa_supplicant, NetworkManager, and dhclient processes as they can interfere with it.
Sent from my One using XDA Free mobile app
Click to expand...
Click to collapse
Can I buy one from you?

11alphamale11 said:
Can I buy one from you?
Click to expand...
Click to collapse
hehe. i'm not a retailer, sorry

I already tried backtrack on my phone (not htc) but there weren't all options available, like all the hacking stuff, so it may be the same in kali.
Sent from HTC One m8, or maybe not anymore

mr.loverlover said:
I already tried backtrack on my phone (not htc) but there weren't all options available, like all the hacking stuff, so it may be the same in kali.
Sent from HTC One m8, or maybe not anymore
Click to expand...
Click to collapse
if you want all the tools you're used to in kali, you have to run "apt-get install kali-linux-full" after you log in.

eudemonics said:
hehe. i'm not a retailer, sorry
Click to expand...
Click to collapse
Its okay.I ordered the TL-WN722N Tp link usb adaptor. It should work just fine.

"apt-get install kali-linux-full"
I think this command will help you to see full content of kali linux