I am looking for help. I am a noob and I rooted my phone and it all went well. I froze apps that others had frozen. I tried to be very cautious but I froze LGSetupWizard with titanium backup and then did a hard reset. My phone now starts up with the setup wizard and when it gets to the end it states that the application (process com.android.LGSetupWizard) stopped unexpectedly then it loops back to the beggining. I have actually been able to access my email and the net from the notification dropdown. I am lost as what to do. Is my phone bricked? Is it possible to simply put the application back into the phone somehow? I have access to the files that I froze through titanium back up on my computer as they were on the sd card. I would really appreciate any help
Can't you just skip out of the wizard before it gets to the end? Or choose to not go through it at all?
Try the factory reset and see if that helps... Just guessing though ?
How
The start-up wizard started automatically after the reset. I have tried to get out of it but when I "exit" it brings up the same error message. I read a post on another phone where you could opt out of it by pushing a few buttons in a certain sequence but it did not work. How would I do a factory reset as is? Any ideas? Thank You!!
Can you get debug mode running (possibly by connecting to your computer, selecting the computer usb connection, and then long holding the line in notification center or something)? If so, you might be able to push the backed up .apk with adb and get it reinstalled.
Explanation
I really apprecitate your post. I am sorry I am a noob and I am not sure what you mean by "long holding the line in notification center". I will download ADB and research how to use it. Thank You!!
If you can make adb working, then you can use 'adb uninstall' the TB, or use 'adb shell' login to phone, su, then delete TB app or data
TB?
Thank you for your post, what is TB?
I must be a real idiot. I found out after the fact that if you select any other option than PC software on the USB connection mode it disables debugging mode. I have ADB but it is not recognizing the phone because it is not in debugging mode. Is there any other way to activate debugging mode besides Settings -> Applications -> Development -> USB debugging?
Please Help!
TB means TitaniumBackup.
Another way to enter adb:
If you have cwm recovery installed, pls continue see following steps:
1. Enter CWM Recovery mode.
2. Then connect your phone to computer
3. enter "adb devices"
D:\android-sdk-windows\platform-tools>adb devices
List of devices attached
LGOxxxxxxxxx recovery
If you see above, then good, enter "adb shell" to login to your phone.
enter "id" to make sure you are root.
then:
cd /data/app
ls -l *Titanium*
#you should see something like com.keramidas.TitaniumBackup.apk
#then enter:
mv com.keramidas.TitaniumBackup*.apk TitaniumBackup.abc
Above cmd will make the app executable file invalid extension, which should disable the TB app. (I didn't try, but I guess it should disable the app)
HTH,
xordos
CWM Recovery
I don't have CWM recovery, I tried to research it and I could not find the LG nitro in the list for clockwork mod, should I use one of the optimus models? I rooted with superoneclick. If I froze the file in TB would uninstalling TB unfreeze it? I have actuall been able to use mail, messaging, and the phone when someone else calls or emails me and I have been able to access settings for each of these specific areas but I have not been able to access settings for the debugging.
Thank You!!
USB debugging on how do I push the files?
I have ADB running and I am in debugging mode. I still have root. How and where would I push the file onto the device.
Thank you!!
Resolved
My issue has been resolved. Thanks for the help!
problem fixed
hello .
If you still have the problem with the lg phone , there is a very easyyyyyy solution .
I had the same problem ; i deleted Lg home because i was using go launcher home , then one day i just moved go launcher on the sd card . That was the problem , i hard reset my phone 20 time , but still in the end of the reset process i was receving that error , the process stoped .
Ok , once you have reached the error " setup wizard process stop " , press the close button . Than press the 3d menu button . You will go into 3d menu , there click 3d games and accesories . Launch the game asphat 3d. The game will be installed . After you launch the game , there is a small button in the game , in the top left corner , similar with an earth , named info . Click that button , than click the twiter button . Now you will launch the internet browser and you problem it's fixed. Once the internet it's opened , go to google com , and search for any launcher . By example seach go launcher , find it , download it , install it . When you want to install it a windows asking about some security settings will open . It;s the settings menu of the phone . Here you can can allow to install application that dosen't come from play store , or you can just enable usb debuging ( and of course with usb debuggin enabled ,you can easly update or downgrade your phone using the lg official software ) .
Good luck .
hey man, how did you fix this problem? i have the same deal right now. thanks
gave up. flashed kdz
Related
I have a big problem on my HTC Droid Incredible.
Bypassing the activation screen really irritates me and i can't turn on the USB Debugging which is the key to root and s-off my phone and to bypass the activation screen.
The procedure i did for bypassing the activation screen are: tap 4 corners, safe mode, call *228 and end call after few seconds (did this several times), cdma workshop, ##778 change the nam setting, and non of them works for me.
cmlusco member of xda told me that the best way to bypass it is to change the build.prop in any rom i'm going to flash on my phone. Then he give me this link http://forum.xda-developers.com/showthread.php?t=1306400 and i think this is it, but in the end still failed because i need to turn on my USB Debugging.
Please help me to bypass my Droid Incredible.
I'm here in Philippines and there is no Verizon network provider here.
I already solve this problem and I can use my Droid Incredible. Sweet!!!View the 3rd post how did i do that.
Click to expand...
Click to collapse
are you able to fix this?im having EXACTLY the same problem.
yup I already fix it, just follow this procedure.
1) try to enable usb debugging mode by doing this procedures.
for this,you should need wi-fi.
so,let's start
1)when the phone calls to *228 tap contacts icon,right to the "end call"
2)try to add a new contact and enter facebook or other socialnet dialog.
phone asks you to enable wifi, do this and connect your wifi network
3)next hold the search button and (via voice search) search in google "market"
4)tap to the official market page, phone asks you about opening this page,choose market app.login in the google accounts,if you need.
5)search in market "usb debug" app. install it and tap "open' in the market app
6)enable usb debugging and enjoy)
and for those who don't have a wifi connection in there home, this procedure is for you.
1. call *228 and tap the contact on the right side of end call.
2. add contact and put any information.
3. try to connect it in facebook to prompt the setting window.
4. tap setting.
5. tap search softkey and type application.
6. finally you can enable usb debugging without any problem.
thanks to ramazancik94 for giving this life saver step for enabling usb debugging mode.
2) root and s-off your phone by following this procedure root 2.3.4,downgrade,and s-off
3) if you already have CWM, rooted, and s-off your phone try to install some ROM using CWM in development section. Double check if your phone is s-off via hboot (press and hold power button and volume down), your phone is rooted if you install CWM, and find some ROM that suits your need.
4) Try to use the "end call bypass" if this method doesn't work with you this will be your last resort. Delete the phone.apk before you install the rom, to delete the phone.apk open the "blah blah blah rom.zip" and go to data> system app> find phone.apk and please don't extract the rom and delete the phone.apk or i won't work, just delete it from the zip.
Note: Deleting the phone.apk will result for disable your phone signal. So you're going to use your phone for music, game, watch some movies and wifi internet. You won't be able to use it for call, text and mobile data, and also please read it carefully so you won't **** your phone. You've been warned
For more information visit this thread: help bypass the activation
All big thanks to cmlusco, ramazancik94 and tiny4579 for their help
need help
sir maybe you can help me with this...im new to android phones and i dont think i can make it
can you please send me the step by step procedure of the things i need to do after i put my phone in USB debugging mode?hope you dont mind
my email is [email protected]
my tcp account is kian0926, im here in the Philippines as well and im glad that you were able too fix yours, hoping that i can use mine as well, saving this device from a trash can
many thanx in advance...
i can't get my ADB working
after i extracted mini-adb under c drive (c:\mini-adb_inc) i extracted adb inside of it
but icant get adb working
when i tried to open adb it just flashes (like blink of an eye) and closes itself immediately
i cant proceed
pls help..............
Kian0926 said:
i can't get my ADB working
after i extracted mini-adb under c drive (c:\mini-adb_inc) i extracted adb inside of it
but icant get adb working
when i tried to open adb it just flashes (like blink of an eye) and closes itself immediately
i cant proceed
pls help..............
Click to expand...
Click to collapse
You cant just click on the adb.exe file, it is a cmd line program. Open a cmd prompt on your pc and type " cd C:\mini-adb_inc " then type in your adb command, example " adb devices " this should show the serial number of your phone if connected to the pc and adb and drivers are setup correctly.
thnx for the reply
but this " cd C:\mini-adb_inc " seems to be invalid when im trying to enter n the command prompt window
i already tried removing those that i downloaded and download them again but still the same thing...
---------- Post added at 02:19 AM ---------- Previous post was at 02:11 AM ----------
also inside of mini-adb extracted on my c drive theres no adb.exe.it just say's adb
under that is AdbWinApi....so cunfused now
Kian0926 said:
thnx for the reply
but this " cd C:\mini-adb_inc " seems to be invalid when im trying to enter n the command prompt window
i already tried removing those that i downloaded and download them again but still the same thing...
---------- Post added at 02:19 AM ---------- Previous post was at 02:11 AM ----------
also inside of mini-adb extracted on my c drive theres no adb.exe.it just say's adb
under that is AdbWinApi....so cunfused now
Click to expand...
Click to collapse
What makes you think the cd command didnt work, did it give an error? All cd does is change the directory to C:\mini-adb_inc where the adb file is located. It is ok if it says just adb and not adb.exe, your pc is just set to hide extensions. When you first open the cmd prompt to the left of where you type it will say something like C:\users\your_user_name\desktop >, when you type cd C:\mini-adb_inc it should go to the next line, and to the left of where you type now it should say C:\mini-adb_inc >Then type adb devices and see if a serial number comes up.
"C:\users\your_user_name\desktop" his is what i exactly saw on my laptop and when i tried enterring "c:\mini-adb_inc" a message appears say's like "incorrect path/directory"
im gonna try using another PC and hope this time it works..
Kian0926 said:
"C:\users\your_user_name\desktop" his is what i exactly saw on my laptop and when i tried enterring "c:\mini-adb_inc" a message appears say's like "incorrect path/directory"
im gonna try using another PC and hope this time it works..
Click to expand...
Click to collapse
You have to type " cd C:\mini-adb_inc " or what ever the path is to the adb file. here actually try this. Go to the folder where the adb file you unziped is. Then hold ctrl + shift and right click on an empty space in that folder, and select open cmd prompt here. then type in your adb command, ie adb devices.
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
Sorry to say, but if you cant enter hboot, or boot up to the os or recovery, then the phone is more thsn likley bricked. Unless its a battery issue. Does it vibrate at all when trying to start?
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
Does it boot when plugged in? There MAY be some help if it can boot when connected to AC power.
Kian0926 said:
after i successfully activated,rooted to 2.3.7 with cm7 ROM my droid incredible it was working perfectly fine,but after a couple of hours using my droid it unexpectedly shut itself down and left me with just a blinking orange led at the top of it..last application running is viber,im on a call actually..and my phone is on charge...
what might be the cause of it?and can this be fixed?..my phone is completely dead
i even tried resetting the phone(pressing volume down button and power button but still no reponse..
Click to expand...
Click to collapse
I've experience this, just a blinking orange led. What did I do was i charge it and a couple of minute the the blinking orange led stops and it become a steady orange led.
Easier way (offline)
Found what could be an easier way, I'm playing with my sister's incredible and I can get usb debugging enabled by using any of the official verizon update packages (could be a rom, but I downloaded the smallest hboot upgrade from htcdev), it appears to send some commands in usb mode that trigger the activation of usb debugging, what's funny if that if you either disconnect before it's done, or it fails, it leaves usb debugging on.
Non-sense.
EDIT: You just have to open the utility, you don't to flash or disconnect.
Such and old thread but I have a Incredible that a friend gives me and I couldn't access the market app by search function. What I did was search anything with voice commands, then a navigator window opens and change the URL to: market://details?id=usb, it opens the market app and I can install the USB debug app
Simple method, without the use of USB Debudding/rooting flashing:
Go to Emergency dialer,
Enter ##778, and press 'call'
Select 'Edit Mode'.
Password is: 000000
Select 'NAM Settings'
Make the following changes:
MDN = your 10 digit phone# (0000000000)*
MIN1 = your 7 digit phone# (0000000)
MIN2 = the area code of your phone# (000)
Press the 'back' key and go to 'HOME SID/Home NID' settings
Select 'Home SID/NID #1', and change the first value to '189' (Leave the 65535 alone).
Now press your 'menu' key
Press 'commit modifications' "button"
Phone Should reboot now.
Changing MDN using cdmaDevTerm
In some phones MDN cannot be changed, in this case you need to connect the phone to the computer as a "modem" device, and use the opensource cdmaworkshoptool / cdmaDevTerm from here:
http://code.google.com/p/cdmaworkshoptool/
Connect the tool, select manually / automatically the COMPORT for your HTC device, Read from device, Change the MDN to 0000000000 Select write
Disconnect and reboot your device.
It should now by pass the activation.
most of the ref. from
http://androidforums.com/incredible...g-activation-screen-no-service-available.html
Hello.
I recently got myself a Samsung Galaxy Tab 3 7in and everything seemed to be working just fine until the system eventually prompted me to update the Samsung software. I followed the steps, the tablet downloaded the update files itself and rebooted in order to install the updates. Problem is, during the reboot/installation process the screen remained black with just 2 lines of pixels on across the screen, I though this was part of the booting process but it just stood there for more than 10 minutes so I decided to turn it back on. Everything seemed to be fine, but then an error message came up saying there could be problems with the software (i didn't pay too much attention), but after this it won't let me install any apps. After an app is done downloading a message pops up saying "unknown error code during application install -110", plus my computer (or any other computer) doesn't detect when it's plugged in via USB cable. I've tried doing several factory resets and wipes and still have the same issues. Tried installing Kies but it won't detect it either.
How can I repair the firmware without having to connect the tablet to my computer? Is there anything I can download directly to it or transfer via Bluetooth to re-install the software?
Any help will be very much appreciated
Try resetting it back to factory defaults. You can google it easily.
hypnonaut said:
Hello.
I recently got myself a Samsung Galaxy Tab 3 7in and everything seemed to be working just fine until the system eventually prompted me to update the Samsung software. I followed the steps, the tablet downloaded the update files itself and rebooted in order to install the updates. Problem is, during the reboot/installation process the screen remained black with just 2 lines of pixels on across the screen, I though this was part of the booting process but it just stood there for more than 10 minutes so I decided to turn it back on. Everything seemed to be fine, but then an error message came up saying there could be problems with the software (i didn't pay too much attention), but after this it won't let me install any apps. After an app is done downloading a message pops up saying "unknown error code during application install -110", plus my computer (or any other computer) doesn't detect when it's plugged in via USB cable. I've tried doing several factory resets and wipes and still have the same issues. Tried installing Kies but it won't detect it either.
How can I repair the firmware without having to connect the tablet to my computer? Is there anything I can download directly to it or transfer via Bluetooth to re-install the software?
Any help will be very much appreciated
Click to expand...
Click to collapse
my friend has the same problem. did you fix the issue? if so how?
I am using the Apex Launcher but I think this is possible with stock launcher as well hopefully it helps someone. This is one way to do a factory reset is:
You will need your MSL TO DO THIS. If you don't know it put the "Factory Mode" shortcut on your home screen then skip down to the 2nd part of this post & install the msl app.
FACTORY RESET:
1) long click on the home screen
2) click on shortcut
3) select Activities
4)Scroll down to "Factory Mode" tap it then select the dropled down one. This will put a Shortcut on the Home Screen.
5) Find the Factory Mode shortcut you just made & tap it to open it.
6) Dial ##786# then on the screen that pops up
7) select "RESET"
8)enter your msl in the box that popped up then select ok then the device will reboot & when it powers backup it will be like it was from the factory & if you don't know your MSL follow the instructions below.
TO GET MSL:
1) In a browser type bit.ly/mslutility - can sideload if needed
2)install app
3) Open app & click get MSL it will most likely fail this is fine.
4) click on the factory mode shortcut you made to open it
5) dial ##3282# & put in 6 zeros-it will tell you that it's incorrect this is fine. Go back to home screen
6) Open the MSL App & click on Get MSL-this time it should give you your devices 6 digit MSL Code. Write it down. Then do step # 6 above to reset your Device.
This shortcut will allow you to put the Sprint SGT3 into DIAG MODE(##3424#) , get into the ##data#(##3282#) menu, do the factory reset ##RTN# (##786#) & most likely any other Dialer/hidden menu's for this device.
Thanks to the MSL App builder(not sure who it is so let me know please)
Sent from my SGT3 SM-T217S using Tapatalk 4 I Flashed 2 Selectel
What is it trying to update to? 4.2.2?
Levi Woodard
Woodardwoodworks.com
Sent from the XDA premium app.
Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:
Naerade said:
Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:
Click to expand...
Click to collapse
Please ensure you REALLY use the correct key combo! Just saying bla does not tell us what exactly you tried.
If you really can't get in you can try to Boot into download mode
https://m.youtube.com/watch?v=0cbLhpWq5C8
Then use lgup to reinstall stock ROM and do all the stuff again to get twrp, root and a custom ROM.
Naerade said:
Hi everybody !
I usually (always normally) succeed myself at resolve my phone problems, but this time I can't do anything.
My problem :
I have a LG G4 ; I saw an update of Imperium Rom (v8) this morning, so I installed it, everything worked well until I decided to install a, apparently, ****ed mod on xposed ; and since I have rebooted I can't do anything ; the LG logo shows and just after "UI system as stopped", just one time but, then I can't do anything, screens over screens, can't access parameters, password required, "flex mode" (never saw this before), re-password, system UI restart, loading background, restart system UI; and this in a infinite loop SOOOOO
I decided to reset it, yeah... But I can't access my recovery, wow o/
I followed the step to access it by switch it off and press volume down etc --> It just boot normally, or best in safe mode by magic but same problem ; via parameters but I can't access parameters ; and via ADB buuut my phone isn't recognized even with the complete sdk, drivers, everything you want, there's nothing to do because --> while restarting system UI it deconnects so of course it can be recognized
I removed xposed (while I could still access recovery, as I was thinking it was coming from the xposed module) and so now I can't even access recovery via shutdown menu (as I had put "reboot to recovery" in via Xblast, a xposed module) ; and of course it doesn't change anything
I neeeeed your help so much, I don't mind losing what's on it :crying:
Click to expand...
Click to collapse
can it enter download mode.. if so use LGUP and KDZ file.
to enter download mode press vol key up connect usb. youll see it on screen. then flash it using KDZ
raptorddd said:
can it enter download mode.. if so use LGUP and KDZ file.
to enter download mode press vol key up connect usb. youll see it on screen. then flash it using KDZ
Click to expand...
Click to collapse
Thank for your answer ! No it couldn't even boot in download mode
I resolved my problem by forcing again the buttons to reset completely, it finally showed me after about 30 boots or more the reset screen, I said "ok" ; and in fact it just rebooted saying "updating Android", I did not lost anything.
I still don't understand how it happened but anyway !
I don't know if it's possible to set the topic as resolved ? I don't find it
So hello there!
I'm having the following issue and I'm kinda out of ideas.
I was running a (KingRoot) rooted fireOS 4.6.6.1 (420) if I'm not mistaken.
So this is what happened:
Phone was running just fine, but I wanted to get rid of the facebook background services which kept running without the actual app installed. Also a friend proposed to run the 'fstrim' command. So reading through xda I found an app called 3C Toolbox (http://www.3c71.com/android/?q=node/916) which seemed to be safe to use. Installed it and still didn't change a thing except for the three 'fstrim' actions to perform. After that I restarted my phone.
Powered off just fine, but at the start only the 'Amazon' logo comes up and vanishes into a black screen with the backlight still on. Even after waiting several hours nothing changes.
So what did I attempt to get it wirking again?
At first I tried to simply restart it. --> Nothing changed.
Tried to get into recovery and clean the cache. --> Nothing changed except the 'Amazon' being on for a bit longer
Get into ADB and try pull/uninstall... --> Guess due to the locked bootloader I'm not allowed to issue any command other than 'adb sideload [packagename]' for system updates. As for ADB itself I can only get it to recognize on the PC when I get into recovery and choose the 'apply update from ADB' option.
Get into fastboot according to this tutorial (https://forum.xda-developers.com/showthread.php?t=1668159) --> doesn't work.
Get into 'Safe Mode' with this tutorial (https://forum.xda-developers.com/fire-phone/help/how-to-fire-phone-to-boot-safe-mode-t2828240) --> doesn't work either.
So does anybody has another idea I could give a try or should I just abondon all my data and flash a new clean image?
Also I'm not sure if updating from ADB will erase all personal data too. Guess so, but maybe I can get a clearification in here too.
Kindly follow the steps carefully:
1. Install ADB App Control [ Download ]
2. Go to Load Preset
3. Import the attached file
4. Click disable
5. Go to stock recovery > wipe cache partition > reboot
6. Run galaxy app booster and optimize the device.
7. Enjoy the snappy and debloated experience
Note:
1.Uncheck any package from the list that you might need before clicking disable.
2. Not stable with latest one ui 4.1 update.
Thanks for this.
I dont know how much faster or anything is, but Im glad to have wiped fb off of my phone!
somewhere I went wrong
i have error 3020
"your phone is locked device services was uninstalled without authorization"
help please?
usb debugging is enabled but not "always"
the phone isnt seen by adb app control
Id be happy to just boot into recovery and do a factory reset. But I cant get the right button
combination. Is it power and up volume or power and down volume?
To boot into recovery press power + vol up while connecting the usb
theres a setting that I cant figure out.
something gets deleted or reset, and I cannot enter into the setting for the camera?
any idea on what it might be?
Vishnuisgod said:
theres a setting that I cant figure out.
something gets deleted or reset, and I cannot enter into the setting for the camera?
any idea on what it might be?
Click to expand...
Click to collapse
i think the probleme is device services apk (com.samsung.android.kgclient). Don't uninstall it.
yes. i solved the problem and i have tested on my phone. The solution is : Don't uninstall device services apk. (com.samsung.android.kgclient)
you can disable device service without any probleme for android 11