[Q] flash/upgrade problem ERR : Rsrc1 Erase - Bada Software and Hacking General

Hi
sorry guys i cant seem sot find help thread so i do apologize if this is a wrong thread.
my samsung gt-8500 wont boot hangs on samsung mobile logo / can go to download mode
so i tried flashing with S8500DXJEA and S8500DXJE8 since im from the Philippines by using multiloader v.5.65
i followed instructions up to the details but still getting
Download Start Ch[0]
Amss 12822.2KB OK[5.1s]
Apps 52428.8KB OK[24.7s]
ERR : Rsrc1 Erase
the reason why im flashing is because after upgrade to bada 1.2 after a few days my phone wont boot stuck on logo samsung mobile.
anyone has idea how to fix this thank you in advance.

same problem!!
Hi,
I installed Bada 2.0 on my Wave 2(S8530) and then when I tried to revert back to 1.2 my phone got bricked and was not even able to go in to download mode.
it was completely off.
I took it to a person who had a Riff Box and he was able to get the phone in Download Mode, but when we tried to install any firmware, it didnt work
I tried installing Europe 2.0 XPKJ, its getting installed completely but the phone freezes at bada logo.
Plz help!!!!!!!!!!!!!!

I took it to a person who had a Riff Box and he was able to get the phone in Download Mode, but when we tried to install any firmware, it didnt work
Click to expand...
Click to collapse
If "he" ... user with RIFF Box has used erase option or tried to write FULLdump of other handset.
Then NV items are erased... like IMEI and so on...
I have done this on my S8500 with using oldest Firmware...
XXJEB if I remember correct... then my handset was alive and I was able to RESTORE NV items...
I have NO idea, how to solve this only with RIFF Box...
Before I have fixed my problem I have tried MANY combinations... See here:
http://forum.xda-developers.com/showpost.php?p=20429368&postcount=42
Few posts later I have solution found for me.
Best Regards

Hi guys resolved the error
try to use complete/full FW that includes boot files and factory
happy reflashing

Related

[Q] Problem in Note 2 Boot + Firmware installation

Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
suppose trongwi
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
note2nooby said:
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
Click to expand...
Click to collapse
Please it is a request , I need a precise method to overcome this problem ... some files in your suggested link doesnot work especially Hotfile.com
Thank you for reading
where can I download "Recovery Package/ROM"? Hotfile.com is not available anymore
Thank you
removed
simple google search gave me this , try to download!
Edit : i took the link off , because it could harm your phone if you are coming from 4.3 android
Ajmal khan
I faced the same problem few days back...
Start kies on ur laptop ( dont connect ur phone yet )
Choose initialisation option
Enter model number
Enter serial number
Now connect ur phone with pc in download mode
Pls make sure u have high speed net for 2-3 hrs...
Bcuz kies download the full rom as per ur serial number
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
note2nooby said:
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
Click to expand...
Click to collapse
No No and Honestly I didnt try that ... I just wanted to freshen my mobile by reinstalling official Firmware 4.1.2 .... oh anyways good news is that I recovered my mobile by following the bellow steps ..
1. Downloaded Official Firmware "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar"
2. Opened Odin
3. and upload the "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar" in PHONE section under PDA (Not PDA) & pressed Start
4. The installation went well but with problems in upgrading applications and continual restarting.
5. again opened Odin and this time I uploaded the official Firmware in PDA and installation went well
6. Booting and registeration also went well.
7. Mobile is back on life
But But
Now my colleague has messed with Note 3 and it also gives the same msg as i had in the beginning "firmware upgrade encountered an issue".
Thank you max621 for your kind help, I will try those for Note3 instead.
Thanks for reading.
ajmalkhan360 said:
Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
Click to expand...
Click to collapse
Try to Remove the battery and try to access the RECOVERY
the FIRMWARE was damaged.
I wish that you have nandroid backups there.
I already experienced that and just rebooted to recovery and restoring by nandroid.
Glad to see your phone is back up and running ...
next time you want refresh your phone , just do simple factory reset!
Glad to hear that u recovrr ur phone.. but for note3 u must install kies3 first....

rom upgrade fail Lenovo s850

hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
graatenbil said:
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
Click to expand...
Click to collapse
Try to explain better! Do you have installed custom recovery?
no i installed a modified multi language rom from "needroom" did every as told and everything looked fine during the upgrade and when i was finished i got the green circle that says it was ok but when started it up it went in to boot loop and said "TOOL DL image fail!" but after a while its totally dead.,when i try now it wont load in any software into the phone ,just starts up the purple pre preparation on the SP flash tool but when i connect the phone it stops .cant get it into recovery mode or anything,just completely dead. i would rely be thankful for some advice her
Maybe the package you've tried to install is corrupted.
most likely, but is there anything to do with it or is it over for it.
graatenbil said:
most likely, but is there anything to do with it or is it over for it.
Click to expand...
Click to collapse
Most likely your device is unusable. Without any recovery, I dont think you will be able to do anything. I am sorry.
OK a 200$ experience richer , thanks anyway
graatenbil said:
OK a 200$ experience richer , thanks anyway
Click to expand...
Click to collapse
Just a question....are you able to enter fastboot?
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
hello my friend. I got exactly the same thing that I just tried to install TWRP. I stuck in Boot loop. solution found by disconnecting the battery. and making again the same procedure. but once I checked her DA DL All. Now how puts the battery is another story .but if I want i tell you, you need some tools that may have in your home..
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
setmov said:
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
Click to expand...
Click to collapse
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
RE
leo_alex82 said:
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
Click to expand...
Click to collapse
The phone started in normal mode after the battery dryed and the phone went off.
Hi, has anyone Lenovo S850 firmware upgrade solution? Now I have resolve "DL Tool Image Fail" problem but have another problem - every rom I download touch screen doesn't work. On "original" rom (not multilanguage) touch screen worked properly. Does anyone have "good" multilanguage rom with touch screen working?
method to install original rom android 4.4.2 in lenovo s850
i have found the perfact solution to install original 4.4.2 rom on lenovo s850...so for that you have to donload rom from the link in notepad file...i have uploaded notepad file and download link is in that it is about 1.1 gb...so it will take time to download and after that what you have to do is open flash tool and then check da dl check sum and then extract the file you have download of 4.4.2 android and then in flash tool click on scater loading and browse to the the extraction location and in extracted folder there will be a folder somethinf target bin in that folder select scatter loding file of lenovo s850 and then just simply click on upgrade firware and then switch off your phone and then wait to process complete untill green circle come...and if you dont have flash tool...google it and download...thanks i hope this helps someone...:good::good::good::good:
Dear devs, help me out on UNBRICKING LENOVO S850:
Initial Problem was: AFTER TURNING PHONE ON (NORMAL BOOT UP) IT GOT STUCK ON BOOT LOGO.
Very first tried solution: PRESSING BOTH VOL.+POWER PHONE WENT IN LENOVO RECOVERY MODE. THEN I TRIED TO FUSE FORMAT BUT IT FAILED TO FORMAT. PROBLEM REMAINED SAME.
Second Tried Solution: DOWNLOADED OFFICIAL STOCK ROM (A. Lenovo_S850_VIBEUI_V1.5_1419_2_ST_S850_4.4.2 B.Lenovo_S850_ROW_S211_140923 C. Lenovo_S850_ROW_S207_140814. D. Lenovo S850 official firmware flash file) + ALL AVAILABLE SP FLASH TOOLS + USB VCOM DRIVER FOR MEDIATEK AND INSTALLED DRIVERS.
USING ABOVE FILES I TRIED TO DOWNLOAD ALL ROMS WITH DIFFERENT SP FLASH TOOLS VERSIONS BUT ALL THE TIME RED BAR CAME TO 100% THEN BAR STUCK ON 0% FOLLOWED BY ERROR "SDMMC WRITE FAIL".
THEN I TRIED UPGRADING FIRMWARE, SAME AGAIN IT GAVE ERROR "FORMAT FAILED"
THEN I TRIED TO FORMAT USING FLAH TOOL (ALL VERSIONS) AGAIN IT GAVE SAME ERROR "FORMAT FAILED"
crazy
ur cable problem pp

Stuck on Firmware Update Screnn / loosing connecting via Flash Tool

Hello,
so i tried to upgrade my Android using .kbz file. I downloaded flash tool and set eveyrthing like in tutorials. Then my phone started updating but in half way software said :
I deleted LTE LG G3 modem from Windows devices and changed port to COM41.
Now i dont know what to do. I cant update via Flash Tool because there is problem with connection and i cant even start my phone! Argh...
Can you help me please?
maciek1o3s said:
Hello,
so i tried to upgrade my Android using .kbz file. I downloaded flash tool and set eveyrthing like in tutorials. Then my phone started updating but in half way software said :
I deleted LTE LG G3 modem from Windows devices and changed port to COM41.
Now i dont know what to do. I cant update via Flash Tool because there is problem with connection and i cant even start my phone! Argh...
Can you help me please?
Click to expand...
Click to collapse
you removed your phone in a vital area (where it just deleted the old files and before it had installed the new files(partitions) if your phone won"t do anything you need to bring it it if it boots to downloadmode reflash and treat the pc,usb cable & phone like it is a bomb that can go off with the slightest touch

need HELP with "firmware upgrade encountered an issue"

Hello fellow community!
On first place i want to excuse myself for my bad English!!
I have soft bricked T-Mobile (USA) Samsung Galaxy S4 and everything i found in the web DIDN'T help me to recover my phone...
Here is my history for what i did to bring this condition of my phone.
I was on Original T-Mobile 4.4.2 Stock ROM working normal without any issues. But 2 or 3 months ago i was curious about installing on my phone CUSTOM " CYANOGENmod" rom 5.x.x NIGHTY edition. At all installing on that custom ROM was without problems and phone for this 2~3 months works flawlessly "normal"... all this time i updates every day this custom theme and I'm understand this is NIGHTY but at the end i was kind tired from this NOT exactly real and fully functioned replica of custom ROM and get decision to restore my ORIGINAL status of the phone and put latest (4.4.4) Stock ROM. 1st i download 4.4.4 ROM "M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5" for my T-Mobile phone. I put in in DOWNLOAD mode. Connect phone to my computer.. and Start ODIN3 v3.10.6 ( didn't install Samsung drivers because i already have installed them !! ). In AP i put latest ROM... checked was ONLY options Auto Reboot and F. Reset Time ... NO Re-Partition was checked or pit file wasn't given !! Jus i hit the SATRT and receive that !...
everything was fine till the end !!! Flashing stops on try to flash hidden.img.ext4 with error and FAIL all process !!!
I CANT understand where is my problem and what i can do to flash my phone normally?
Please community help me to solve this problem..
1 year ago i have almost the same problem but with the same error "firmware upgrade encountered an issue" and remember here on XDA DEVELOPERS i read the guide how to recovery phone after that but TBH i cant find this guide now with all my searching attempts..
Please for HELP!
and Thank you in Advance for your support!!..
Cheers!
Not 100% sure but you needed to do a factory reset before flashing stock firmware.
You can't flash kitkat over lollipop before doing factory reset because they are two different firmwares.
Try doing a factory reset and flashing again, if it fails pull battery, replace battery and go straight into download mode, connect to pc and flash again with odin.
Sometimes the double flash can be successful.
Good luck.
Pp.
thank you for replay!! but I [SOLVED] my problems!!!
iceBringer said:
thank you for replay!! but I [SOLVED] my problems!!!
Click to expand...
Click to collapse
Would be nice if you could share your solution for others that may have the same problem

Failed to get PMT info, is it bricked for good?

Hi,
So today suddenly my phone restarted and after that it was stuck on the micromax logo, I coudnt get into recovery either. So I tried to flash the stock kitkat rom using sp tools, it did manage to flash it the first time but the phone after that wont start at all, nothing not even the charging screen.
Is it bricked for good? I tried to flash it again but if I choose firmware upgrade or download+firmware upgrade in sp tools I get the pmt info error. Is there any way to get the phone back to a working state? Any help would be much apprecited.
Note: I did look through the old post on the similar topic where the guy managed to solve the problem by using a latest version of sp tools, Im already using the latest version , no dice.
Did you get anywhere with this to unbrick the device as I have similar with a GDP XP and it wont now boot or show charge its just dead!
Any help on fixing this would be great as we cant be alone with this. ATB

Categories

Resources