Related
Sadly, 4 of my friend birck their phone when they are flashing the new Bada 2.0. Do you have any solution to bring their phone back
WTH !!!!!
How did they brick them???
Is the flashing was killed in the bootloader step or any other step
if in the bootloader then it is full brick and the will need a fix with JTAG
If in any other step just reflash the files again
Best Regards
One of them forgot to check Full download, other didn't load the usb driver. Others can't understand what they did wrong. But they cant switch to Download mode now.
same one can help you maybe need JTAG
Sometimes, pulling the battery out for a few minutes, works. Otherwise, service is needed.
Thank you for your suggestions, I will tell your ideas to my friends. Hope one of them works.
bad luck
its working great here, except for video recording xD..
and i cant connect to kies, so my contacts are not usable
Nobody cant brick wave, just litlle difficult to reflash. But dont worry you can reflash it !!!
secretwhite said:
Sadly, 4 of my friend birck their phone when they are flashing the new Bada 2.0. Do you have any solution to bring their phone back
Click to expand...
Click to collapse
The obvious 1st question to ask is to what did they try and flash it to?
The current Bada 2.0 is ONLY for the S8530 Wave II and NOT the S8500 Wave I
If they tried to flash it on the Wave I then "Theres your problem!!" Like Jamie Hinaman from Mythbusters would say
toxicdust said:
The obvious 1st question to ask is to what did they try and flash it to?
The current Bada 2.0 is ONLY for the S8530 Wave II and NOT the S8500 Wave I
If they tried to flash it on the Wave I then "Theres your problem!!" Like Jamie Hinaman from Mythbusters would say
Click to expand...
Click to collapse
Like I said in my second post, one of them dorgot to check Full download, other forgot to load new usb driver. And they all have Wave II
secretwhite said:
Like I said in my second post, one of them dorgot to check Full download, other forgot to load new usb driver. And they all have Wave II
Click to expand...
Click to collapse
Than I retract my statement
Usually once the bootloader has been loaded you can just reload it without doing to bootfiles again and it should work. But if their bootloader is screwed they will have to take it in to my knowledge.
Just a thought though... Were some of theirs branded? Because i know the bootloaders for branded phones are a bit different?
Their bootfiles screwed probably. I2m still searching for any solution
secretwhite said:
Their bootfiles screwed probably. I2m still searching for any solution
Click to expand...
Click to collapse
I'll google some for you as well but seeing as we dont know much from the new bootfiles i doubt there will be anything.
As a suggestion to them let them open up Kies and then plug in the phone in whatever state it may be.
There is a emergency recover mode that it should enter if it cant boot and Kies will then just revert to the latest "available" firmware.
Hope this helps but I will see if i can find something else that might help as well
They have one problem with Kies. It asks some kind of password but they cant find that password. This is their last solution unless someone tell different solution.
secretwhite said:
They have one problem with Kies. It asks some kind of password but they cant find that password. This is their last solution unless someone tell different solution.
Click to expand...
Click to collapse
Ye i dont know the password either. It should provide it on the phone itself from what i could understand when it goes into recovery mode.
If its not displayed on the phone you wont have a code to put in there
I have no idea for S8530... but for chinese S8500 few Bootloader combinations were different. Some structure differences.
If you or your friends all from China... maybe chinese Firmware not allow this bada 2.0 Firmware...
Best Regards
@kadavil i have yesterday synced my contacts, kies is no showing firmware version but it worked for me on 2.0. It is like hidden, the version dont shows up, have you installed the new drivers in the folder before?
I2m from Turkey so my friends. We couldn't repair their phone and they will send their phone to service tomorrow. Thanks for your solution but complete kernel change ruin our repaie attempt.
@ secretwhite
Sorry, my fault. i'm sometimes blind and very tired...
Anyway. Their are some Operator/Branding related differences ... example chinese FW from S8500:
ZN...
ZC...
Or for instance adress changes S8500/S8530...
From S8530 seems more Bootloader Versions...
Maybe you should post your prior FW Version, before dead.
So maybe other users from turkey prevent "damage" their Wave II...
Best Regards
I also got same problem, my SW ver. is middle east but i tried to flash an Europe vers. of bada 2.0. it was stacked at flash starting point and i can still able to put to download mode, can i re flash it back to bada 1.2 or should try again 2.0 or any other method pls, help.
mylove90 said:
WTH !!!!!
How did they brick them???
Is the flashing was killed in the bootloader step or any other step
if in the bootloader then it is full brick and the will need a fix with JTAG
If in any other step just reflash the files again
Best Regards
Click to expand...
Click to collapse
HI guys I hava big problem my S3 enter download mod but product code blank. ı never load any pit file or roms. How can I solve this problem? my phone photo is link.. Waiting for your news beautiful. thanks
So how is this affecting any use or functions of the phone?
LordLugard said:
So how is this affecting any use or functions of the phone?
Click to expand...
Click to collapse
it has become my device while playing asphalt 7 installed. I can never be the software installation?How this came to standstill. I do not understand...
Can you be more clear? I can't understand what you just wrote or what the exact problem is.
Me neither. Seems English is a bit difficult for him/her. Could you try using Google Translate maybe...
LordLugard said:
Me neither. Seems English is a bit difficult for him/her. Could you try using Google Translate maybe...
Click to expand...
Click to collapse
I'm sorry my english is bad friends. just now entering the download mode. but I can not install the pit and roms phone. product code blank when I enter download mode. can you help me???
So you are trying to flash a rom through odin? That's the only program that a pit file is used for. Are you trying to get back to stock or flash a custom rom? Please tell us, as well as you can, exactly what you're trying to do.
metalfan78 said:
So you are trying to flash a rom through odin? That's the only program that a pit file is used for. Are you trying to get back to stock or flash a custom rom? Please tell us, as well as you can, exactly what you're trying to do.
Click to expand...
Click to collapse
I put my phone photographs of first mail. I want to do the installation with odin "fail" message is coming. device's "product code" is deleted. How can I fix it. I think "eMMC" error has occurred. Can I boot my device sdcard eMMC dismantle. thanks
I put my phone photographs of first mail. I want to do the installation with odin "fail" message is coming. device's "product code" is deleted. How can I fix it. I think "eMMC" error has occurred. Can I boot my device sdcard eMMC dismantle. thanks
What is your first language?
Sent from my SPH-L710
csmasn said:
What is your first language?
Sent from my SPH-L710
Click to expand...
Click to collapse
i think i've got the same problem, everything in my phone is back to stock. latest stock o2u rom, my imei number is correct, my serial number is correct, i've checked the csc code of the phone its set to o2u, everything looks right,
this is the only thing i can find that's wrong.
this is doing my head in, there are some clever people on here, somebody must know how to sort it.
many thanks
lee
The product code i need to repair is
GT-I9300MBDO2U
once that is repaired I think my problem will be sorted. How do I do it.
Many thanks
Lee
www.plctech.co.uk
Problem solved. I didn't have to send it away. I've also found a way to get round efs problems
Sent from my GT-I9300 using xda app-developers app
Hey guys, I have here a cloned Samsung galaxy grand duos GT-I9082 which is owned by my neice and it comes with MT6572 Chipset and a 1GB of RAM. So the problem is it was boot looped due to change of dpi and the worst is, she used the root function in MTK Droid tools though it is already rooted via framaroot and I think what she does really messed up the device. Now I can't access the recovery (through pressing both volume down + power) though it's in chinese language before. When I tried to boot it normally, it just opens the backlight for 10 seconds then turns off then turns on again. When I pressed the volume up + power, "Android System Recovery <3e>" pops out, which is strange co'z it wasn't there before (according to my neice). The only way adb detects the phone is when I choose "apply update using ADB" and there it was detected as a sideload. Lastly, when I do a normal boot while connected to a pc, in device manager, an "MT65XX Preloader" driver pops out (meaning it is detected) before the device restarts again.
So, does this phone still have a chance to be fixed? I feel it still have a little chance, but I don't know anymore where to find any solution to this problem. Hope you guys help me regarding this issue. God bless!
up up up up
im also having the same problem.
does anyone know what to do?
THANKS
If you really want to you can reinstall the official firmware. Use this link
http://www.needrom.com/download/gt-i9082-mt6572/
I'm brick my phone month before.
Suggestion from upper post not work for me.
Do you have another suggestion - rom?
CU
UPDATE: I've found a working ROM for my phone in 4shared. But it does not detect the inserted sim cards because it doesn't come up with "secro.img" file. You might try flashing this ROM here: (kindly remove spaces on the link as XDA prohibits posting of links with at least 10 posts.)
http :// www .4shared .com /rar/ gcWm1jxsba/ I9082-2SIM-OK-MT6572. html
thank you so much for your reply ill try it now hope it works. update you soon with my progress.
it worked but still cant find a way to fix the sim problem
thanks
I'm glad that it also works on your device. And finally I've found a workaround for this undetected SIM cards problem. All you have to do is to enter your IMEI inside the engineer mode. So first, download "MTK engineer mode" in play store then in the app, choose "MTK settings" and then tap "GPRS" then enter your IMEI for SIM 1 (if you only have 1 IMEI, you can both enter the same IMEI for SIM 2. DO NOT INCLUDE SPECIAL CHARACTERS). After typing your IMEI, tap "Write IMEI". Do the same procedure for SIM 2. Once you're done, close the app then restart. Hope this works for you.
not works...no imei yet
LiveLaughLend said:
I'm glad that it also works on your device. And finally I've found a workaround for this undetected SIM cards problem. All you have to do is to enter your IMEI inside the engineer mode. So first, download "MTK engineer mode" in play store then in the app, choose "MTK settings" and then tap "GPRS" then enter your IMEI for SIM 1 (if you only have 1 IMEI, you can both enter the same IMEI for SIM 2. DO NOT INCLUDE SPECIAL CHARACTERS). After typing your IMEI, tap "Write IMEI". Do the same procedure for SIM 2. Once you're done, close the app then restart. Hope this works for you.
Click to expand...
Click to collapse
not works...no imei yet
faizalaziz said:
not works...no imei yet
Click to expand...
Click to collapse
Sorry to hear that. But would you please describe the events or errors you have encountered? Maybe I can help you out even more then.
By the way, I just want to ask if you still have your "secro.img" back up before? You might try to flash it on your device then do the instructions I've posted before. Good luck!
hi bro, please give step by step process for my samsung galaxy grand duos i9082.
LiveLaughLend said:
Sorry to hear that. But would you please describe the events or errors you have encountered? Maybe I can help you out even more then.
By the way, I just want to ask if you still have your "secro.img" back up before? You might try to flash it on your device then do the instructions I've posted before. Good luck!
Click to expand...
Click to collapse
im newbie here please give step by step process for my samsung galaxy grand duos i9082.
i need change my IMEI number
thanks
redrider5 said:
im newbie here please give step by step process for my samsung galaxy grand duos i9082.
i need change my IMEI number
thanks
Click to expand...
Click to collapse
I already discussed before on how to change IMEI sir, just re-read the post #8.
not works...no imei yet
i have bricked my device i9082 MT6572 clone, same with yours right? most probably, the ROM you flashed was a little bit incompatible due to its scatter file. i've detected the problem and you had not included the secro.img which is essential for the IMEI, though flashtool can't include it coz the address is not correct.. after hard works, i've got to have a working ROM but i've not uploaded it yet. i'm gonna upload it soon so please, stay tuned
WE waiting for you guy
JoverTan said:
i have bricked my device i9082 MT6572 clone, same with yours right? most probably, the ROM you flashed was a little bit incompatible due to its scatter file. i've detected the problem and you had not included the secro.img which is essential for the IMEI, though flashtool can't include it coz the address is not correct.. after hard works, i've got to have a working ROM but i've not uploaded it yet. i'm gonna upload it soon so please, stay tuned
Click to expand...
Click to collapse
we waiting for you guys.pleas upload now
Handyshell said:
we waiting for you guys.pleas upload now
Click to expand...
Click to collapse
please, follow the instructions carefully
www (dot) mediafire.com/download/6ay7fvoqm6mvbdz/I9082+CLONE+MT6572+ROM (dot) rar
please replace the '(dot)" with real one..
spread the news.......
accept pls. thanks
JoverTan said:
please, follow the instructions carefully
www (dot) mediafire.com/download/6ay7fvoqm6mvbdz/I9082+CLONE+MT6572+ROM (dot) rar
please replace the '(dot)" with real one..
spread the news.......
Click to expand...
Click to collapse
can you accept my request? i need that rom badly. pls
Jayz2304 said:
can you accept my request? i need that rom badly. pls
Click to expand...
Click to collapse
i'm sorry, i forgot my account on XDA. i'm the owner of that file. can you tell me your email add so i can accept your request?
---------- Post added at 05:45 AM ---------- Previous post was at 04:58 AM ----------
I've already turned it into a public file www (dot) mediafire.com/download/6ay7fvoqm6mvbdz/I9082+CLONE+MT6572+ROM (dot) rar
please hit thanks
JoverTanB said:
[/COLOR]I've already turned it into a public file www (dot) mediafire.com/download/6ay7fvoqm6mvbdz/I9082+CLONE+MT6572+ROM (dot) rar
please hit thanks
Click to expand...
Click to collapse
It's not public.
And could you please provide me with your board ID ? (The clone phone's motherboard ID is written on it, you have to take the phone apart to get it) if it's not much to ask
I have a I9082 MT6572 clone with board ID: W05-MB-V2.0 , the device is infected with Timeservice & Monkey test and several other malware that I don't know how to get rid of except with a fresh flash.
Thanks in advance!
Bugz! said:
It's not public.
And could you please provide me with your board ID ? (The clone phone's motherboard ID is written on it, you have to take the phone apart to get it) if it's not much to ask
I have a I9082 MT6572 clone with board ID: W05-MB-V2.0 , the device is infected with Timeservice & Monkey test and several other malware that I don't know how to get rid of except with a fresh flash.
Thanks in advance!
Click to expand...
Click to collapse
i'm sorry to tell that i've already given the phone to someone and i'm not able to do your request anymore. I've turned it back into a private file (the ROM). please provide to me your e'add to make you access the file. my email is [email protected].
JoverTanB said:
i'm sorry to tell that i've already given the phone to someone and i'm not able to do your request anymore. I've turned it back into a private file (the ROM). please provide to me your e'add to make you access the file. my email is [email protected].
Click to expand...
Click to collapse
Thanks ! This is my E-mail address: [email protected]
Although I don't have the device anymore, but it would be good to have the flash files ready anyways!
HI
i have Samsung Galaxy Tab S SM-T805 LTE
and its protected with fingerprint and pass code
i purchased this online
Please help me how to break its pass code and fingerprint scans
Thanks
try to hard reset the tab in recovery
it should work
gabryrider94 said:
try to hard reset the tab in recovery
it should work
Click to expand...
Click to collapse
when i trying to reset through recovery mode
then error "MDM not allowed to reset ........!!!"
and after that i tied to re flash it via odin
but nothing happen even i flashed it
Hafiz. said:
when i trying to reset through recovery mood
then error "MDM not allowed to reset ........!!!"
and after that i tied to re flash it via odin
but nothing happen even i flashed it
Click to expand...
Click to collapse
Install a custom recovery. Like TWRP and than flash it with odin (download mode) then reboot to recovery and try to wipe everything with it.
Has anyone considered that the tablet may be stolen and we should not give ideas on how to recover it? Contact Samsung and with valid proof of purchase, they may help.
I think it's pretty likely the reactivation lock is activated which is precisely to prevent use of a stolen device. You can't do anything except contact the original owner. If it's legit they can disable the reactivation lock.
Sent from my SM-T805 using XDA Free mobile app
Ramer said:
Has anyone considered that the tablet may be stolen and we should not give ideas on how to recover it? Contact Samsung and with valid proof of purchase, they may help.
Click to expand...
Click to collapse
ashyx said:
I think it's pretty likely the reactivation lock is activated which is precisely to prevent use of a stolen device. You can't do anything except contact the original owner. If it's legit they can disable the reactivation lock.
Sent from my SM-T805 using XDA Free mobile app
Click to expand...
Click to collapse
Totally agree with both.
Ramer said:
Has anyone considered that the tablet may be stolen and we should not give ideas on how to recover it? Contact Samsung and with valid proof of purchase, they may help.
Click to expand...
Click to collapse
yes i agree with you but i purchased this online and the seller did't mention that problem
that's why i post this .
if i go to shop they will charge
and tell me what is my fault in this matter
if someone stole the device then he can go to shop and can repair it coz he is not pay any penny for purchasing this
but i purchased this device.
and here in my country no one use DEMO devises for kind of your information sir .
i think you understand my problem
thanks
Tkkg1994 said:
Install a custom recovery. Like TWRP and than flash it with odin (download mode) then reboot to recovery and try to wipe everything with it.
Click to expand...
Click to collapse
thanks for responding
but i know how to use Odin but i did't use TWRP please guide me how to use this and where i can download this
but remember my device is protected with passcode and fingerprint scans
so how to instal TWRP
thanks
UpInTheAir said:
Totally agree with both.
Click to expand...
Click to collapse
yes i agree with you but i purchased this online and the seller did't mention that problem
that's why i post this .
if i go to shop they will charge
and tell me what is my fault in this matter
if someone stole the device then he can go to shop and can repair it coz he is not pay any penny for purchasing this
but i purchased this device.
and here in my country no one use DEMO devises for kind of your information sir .
i think you understand my problem
thanks
Hafiz. said:
thanks for responding
but i know how to use Odin but i did't use TWRP please guide me how to use this and where i can download this
but remember my device is protected with passcode and fingerprint scans
so how to instal TWRP
thanks
Click to expand...
Click to collapse
You can see in this thread:
TWRP
Tkkg1994 said:
You can see in this thread:
TWRP
Click to expand...
Click to collapse
in this at the end you mention that instal app from play store but i told you my device is locked with pass code i cant open it coz i don't know its passcode
so now ??
Hafiz. said:
in this at the end you mention that instal app from play store but i told you my device is locked with pass code i cant open it coz i don't know its passcode
so now ??
Click to expand...
Click to collapse
Dude, its called odin and download mode. So you flash it manually on your pc. Im not sure if the twrp recovery for T800 works on T805. Idk something will need to link you to that.
To enter download mode: power off device. Then hold power, home, vol down at the same time till a screen pops up. Click yes. Now your in download mode.
Open odin on your pc and connect your tab s to pc. Now click pda/ap in odin and select the tar recovery img you downloaded. Now click start and it should flash
you means that i can instal TWRP via odin just like to flash any firmware via odin
it's correct or not
sorry for disturbance but
very kind of both of ur response
thanks
if you have any of t800 then please tell me i'll try it also
thanks again
Hafiz. said:
you means that i can instal TWRP via odin just like to flash any firmware via odin
it's correct or not
sorry for disturbance but
very kind of both of ur response
thanks
if you have any of t800 then please tell me i'll try it also
thanks again
Click to expand...
Click to collapse
Yes you can install twrp like flashing firmware
@Tkkg1994 what twrp did you use for T805?
Actually "Tkkg1994"
i purchased this online and he did't mention this problem and when i got my parcel
i was just shocked
i think he's got this from any abroad country i'm from Pakistan
and many people told me online that it's DEMO device
The problem is
screen is locked with pass code and fingerprint scans
and when i trying to hard reset through recovery mood then error " MDM not allowed to reset ...!"
even i flashed it with odin but nothing happen
ahhhh
that is my problem man (
If the seller is not willing to give the unlock code, then there's a possibility that you are in receipt of stolen goods. Why not disclose the seller's name and link to site?
If you can't do this, there is a possibility your case is suspicious and I wouldn't advise others to help until you prove you have bought the device legitimately.
i know that sir you are not willing to help me
but here in my country there no check and balance
and no one is responsible after that means that purchasing through individually
i'm not talking about ebay , amazon , etc and these are not working in my country
any thing else you want my purchasing i'll provide info MAN
thanks for replying at least
As your purchase seems suspicious to me and Im pretty sure you can buy one brand new from many known sites for really cheap, amazon, etc. Where exactly did you buy this tablet from? Did you get it from a website, or a person in real life. New tablets dont come with fingerprint locks. If you can give me that, then Ill go on in assisting you.
You have this options:
1. Give it to some IT specialist, who maybe can find out whose tablet it is. (maybe send it to samsung)
2. Try to reach the seller.
3. Download the chagallwifi twrp from here: Download link
4. Go to download mode, select AP/PDA and flash the file. it is a .tar file.
Hello! I upload a capture of all the errors. I'm very interested in solving the IMEI. Thanks for your help!
On stock firmware does it show a correct IMEI?
If so, the problem is random flashing.
Do you have backup of the .cert and or .efs files?
If so, search on how to use them.
If you know the IMEI and it is network blacklisted, use a service for unlocking it. Online you can find it.
I hope I helped.
Kauris said:
On stock firmware does it show a correct IMEI?
If so, the problem is random flashing.
Do you have backup of the .cert and or .efs files?
If so, search on how to use them.
If you know the IMEI and it is network blacklisted, use a service for unlocking it. Online you can find it.
I hope I helped.
Click to expand...
Click to collapse
Hi. Thanks for your answer. In all the firmware I do not have IMEI (unknown). And I do not have a copy of .cert or .efs
DaniPS2002 said:
Hi. Thanks for your answer. In all the firmware I do not have IMEI (unknown). And I do not have a copy of .cert or .efs
Click to expand...
Click to collapse
I don't know if it helps, but when I flashed a Combination for my phone, when i had an unknown IMEI, it showed me one working and network working too but I don't know if you can make use of that IMEI or even if it is valid.
And solved my unknown IMEI just by flashing last stock rom.
If you have your phone rooted, you can extract those files via adb, plenty of tutorials online.
Kauris said:
I don't know if it helps, but when I flashed a Combination for my phone, when i had an unknown IMEI, it showed me one working and network working too but I don't know if you can make use of that IMEI or even if it is valid.
And solved my unknown IMEI just by flashing last stock rom.
If you have your phone rooted, you can extract those files via adb, plenty of tutorials online.
Click to expand...
Click to collapse
Ok. I will try this. Thanks again!. What combination did you install? Could you pass me?
DaniPS2002 said:
Ok. I will try this. Thanks again!. What combination did you install? Could you pass me?
Click to expand...
Click to collapse
The combination "os" is not a full os, is like a test one, so i would not recommend you to install it.
Here you can find it, the page need you to be registered and to pay for a fastest download, none the less, it can be downloaded without paying but it is a little bit slower
https://firmware.gem-flash.com
Remember that you need XXU4
Kauris said:
The combination "os" is not a full os, is like a test one, so i would not recommend you to install it.
Here you can find it, the page need you to be registered and to pay for a fastest download, none the less, it can be downloaded without paying but it is a little bit slower
https://firmware.gem-flash.com
Remember that you need XXU4
Click to expand...
Click to collapse
Thank you! Although I can not find a combination XXU4. I'll wait for it to be available
DaniPS2002 said:
Thank you! Although I can not find a combination XXU4. I'll wait for it to be available
Click to expand...
Click to collapse
Check if this one works out.
https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=41406
Edit: Flash it on AP/PDA btw.
Kauris said:
Check if this one works out.
https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=41406
Edit: Flash it on AP/PDA btw.
Click to expand...
Click to collapse
I need a paid account?
DaniPS2002 said:
I need a paid account?
Click to expand...
Click to collapse
You dont need a paid one, but paying is speedin'.
Not so slow without paying.
Ok and now? My phone is in a menu with some options
DaniPS2002 said:
Ok and now? My phone is in a menu with some options
Click to expand...
Click to collapse
Slide the upper menu and get to config, in device info or something you should find an IMEI and you probably have noticed that the phone is connected to the network, or that was what was shown to me.
Kauris said:
Slide the upper menu and get to config, in device info or something you should find an IMEI and you probably have noticed that the phone is connected to the network, or that was what was shown to me.
Click to expand...
Click to collapse
Same situation mate
DaniPS2002 said:
Same situation mate
Click to expand...
Click to collapse
Hm what is left is just to flash stock, keep it in a wifi connection 168 hours and then flash twrp for rooting the phone and getting those files, lets hope they are not corrupted.
The waiting it is because samsung have seven days as the time.for the bootloader to be unlocked and allowing the phone to be modified.
Good luck.
Also, if you are interested in more details about the waiting for rooting:
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535