Develop Bugs

cannot use any PC36IMG.zip files.

it keeps saying main version is older update fail. i have tried toast's zips and other threads with this same problem and nothing help. thnx in advance.

You've most likely updated to 1.47? Rooting 1.47 is not possible for now... Check this thread.

If you have a recovery flashed still nandroid a backup with super user. Then goto toasts part two and unlock the nand again.just make sure you use the right pc36img. Its not the same as the 1st on you root with.

i had rooted my phone with nand access before but since i accidentally removed the battery while it was updating the pc36img now i am stuck in the bootscreen black and white and cannot flash any pc36img zips

If your stuck at the evo boot screen you might be screwed . Might be time to try and return it.

stoney05 said:
If your stuck at the evo boot screen you might be screwed . Might be time to try and return it.
Click to expand...
Click to collapse
got any tips?

i would just wait till 2morrow for an answer b4 i water damadge the crap out of the phone

can you boot into recovery? if so, which recovery to do have installed?

Vinny75 said:
can you boot into recovery? if so, which recovery to do have installed?
Click to expand...
Click to collapse
i cannot go into recovery it stays on the evo black and white screen. i am not sure which recovery i have

Tornadobarrage said:
i cannot go into recovery it stays on the evo black and white screen. i am not sure which recovery i have
Click to expand...
Click to collapse
ok, so holding down the volume down button while turning on the power doesn't get you to the boot menu?

Vinny75 said:
ok, so holding down the volume down button while turning on the power doesn't get you to the boot menu?
Click to expand...
Click to collapse
boot menu yes recovery no.when i go to recovery it stay in the evo screen

Tornadobarrage said:
boot menu yes recovery no.when i go to recovery it stay in the evo screen
Click to expand...
Click to collapse
can you go into fastboot? from there you could flast a new recovery... assuming you have the eng boot..
see: http://forum.xda-developers.com/showthread.php?t=705026 the first post has the instructions

Vinny75 said:
can you go into fastboot? from there you could flast a new recovery... assuming you have the eng boot..
see: http://forum.xda-developers.com/showthread.php?t=705026 the first post has the instructions
Click to expand...
Click to collapse
i am trying to do this
Copy recovery-RA-evo-v1.7.0.1.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.7.0.1.img(press enter)
where do i put the file so fastboot can find it?

Tornadobarrage said:
i am trying to do this
Copy recovery-RA-evo-v1.7.0.1.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.7.0.1.img(press enter)
where do i put the file so fastboot can find it?
Click to expand...
Click to collapse
same directory on computer as fastboot.exe (I think I got fastboot from here http://developer.htc.com/google-io-device.html)

im not sure if i know how to use it

Vinny75 said:
same directory on computer as fastboot.exe (I think I got fastboot from here http://developer.htc.com/google-io-device.html)
Click to expand...
Click to collapse
i already have fastboot in sdk tools every time i try to run fastboot with the recovery there it just closes quickly

Don't double click it.open a cmd prompt and run the commands there
Sent from my PC36100 using XDA App

Vinny75 said:
Don't double click it.open a cmd prompt and run the commands there
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
i have done that and this pops out
c:\android-sdk\tools>fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default:
2048
c:\android-sdk\tools>
what should i type?

Tornadobarrage said:
i am trying to do this
Copy recovery-RA-evo-v1.7.0.1.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.7.0.1.img(press enter)
Click to expand...
Click to collapse
This.make sure the recovery is in the same folder as fast boot
Sent from my PC36100 using XDA App

Vinny75 said:
This.make sure the recovery is in the same folder as fast boot
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
c:\android-sdk\tools>fastboot flash recovery recovery-RA-evo-v1.7.0.1.img
sending 'recovery' (5032 KB)... OKAY [ 1.595s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.477s
c:\android-sdk\tools>
it failed what should i do now?

[Q] Complete noob needs help relocking bootloader

Okay so I have the One X, decided I wanted to root it even though I have NO IDEA what its all about (yes I know Im an idiot). I basically got as far as unlocking the bootloader then something went wrong and I couldnt get any further. I basically just want to relock the bootloader but I have no idea how. Like I said, Im a complete noob and need someone to really walk me through this the simplest way there is. Ps Im on a mac, which Im sure makes it even more difficult.
Any help is greatly appreciated :/

well, i don't know anything about mac, but i do know how to re-lock the bootloader under microsoft windows.
All you have to do is download FASTBOOT in any windows pc, download it from here
press and hold volume down + power button on your phone (to enter bootloader)
when in bootloader, enter fastboot mode by just hitting power key once,
now connect USB to pc and the phone
u'll see FASTBOOT PC written in your phone screen,
now go to the downloaded fastboot folder in ur pc,
hold SHIFT and Right click, Select OPEN COMMAND WINDOW HERE,
in the command window, just write : fastboot oem lock
That's it!

thanks so much for your reply. I'm gonna hold out and see if anyone can give me a mac reply but I'm gonna see if anyone I know can lend me their laptops and try what you said. thanks again
Sent from my HTC One X using xda app-developers app

becatron said:
thanks so much for your reply. I'm gonna hold out and see if anyone can give me a mac reply but I'm gonna see if anyone I know can lend me their laptops and try what you said. thanks again
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
here is a thread explaining how to unlock on mac, quite simple steps
to lock the bootloader, all u need is to write ./fastboot-mac oem lock instead of ./fastboot-mac oem unlock :good:

I tried that link before and its never worked. I dont have a great understanding of Terminal and it usual gives me something along the lines of 'no such file or directory'.
Edit: I just got '-bash: ./fasboot-mac: No such file or directory'

becatron said:
I tried that link before and its never worked. I dont have a great understanding of Terminal and it usual gives me something along the lines of 'no such file or directory'.
Edit: I just got '-bash: ./fasboot-mac: No such file or directory'
Click to expand...
Click to collapse
That means that you haven't downloaded fastboot!
You need to download fastboot.exe to perform this operation.
or simply visit some friend with a windows pc and do the task

still can't get my hands on a Windows laptop :/ just moved house too so don't even have any wifi agh.

One question, do you have the Android SDK installed? I can help you with the mac since it is the same as linux
arun6106 said:
That means that you haven't downloaded fastboot!
You need to download fastboot.exe to perform this operation.
or simply visit some friend with a windows pc and do the task
Click to expand...
Click to collapse
.exe extentions doesn't work on Macs :silly:

matt95 said:
One question, do you have the Android SDK installed? I can help you with the mac since it is the same as linux
Click to expand...
Click to collapse
I'm sorry but Wtf does sdk mean?

becatron said:
I'm sorry but Wtf does sdk mean?
Click to expand...
Click to collapse
Lol, download this file then unzip it, using the terminal go to that folder and type
Code:
./fastboot oem lock

matt95 said:
Lol, download this file then unzip it, using the terminal go to that folder and type
Code:
./fastboot oem lock
Click to expand...
Click to collapse
I'll try this tomorrow after work. thank you for taking pity on me and helping and not laughing me off the forum

becatron said:
I'll try this tomorrow after work. thank you for taking pity on me and helping and not laughing me off the forum
Click to expand...
Click to collapse
Don't worry :good: no one is a genius in here

matt95 said:
Lol, download this file then unzip it, using the terminal go to that folder and type
Code:
./fastboot oem lock
Click to expand...
Click to collapse
Okay so just tried this and its not working. How and what exactly do I type? When I type ./fastboot oem lock it just brings up a big page of abbreviations and commands. Its also saying ERROR: Could not get pipe properties
This is so stressful

becatron said:
Okay so just tried this and its not working. How and what exactly do I type? When I type ./fastboot oem lock it just brings up a big page of abbreviations and commands. Its also saying ERROR: Could not get pipe properties
This is so stressful
Click to expand...
Click to collapse
Is your phone in fastboot mode? if yes it should work, you should see a red highlighted "fastboot usb"

matt95 said:
Is your phone in fastboot mode? if yes it should work, you should see a red highlighted "fastboot usb"
Click to expand...
Click to collapse
Yep it is.. This is what I got
Rebeccas-MacBook:~ administrator$ /Users/administrator/Downloads/android\ 3/fastboot oem lock
ERROR: could not get pipe properties
ERROR: could not get pipe properties
ERROR: could not get pipe properties
...
ERROR: bulkOut endpoint not assigned
FAILED (command write failed (No such file or directory))
finished. total time: 0.000s
I know im probably not writing it properly

You need to download the file I posted, unzip it, navigate to that folder and then try to type exactly what I write
Code:
./fastboot
paste here what you get
Sent from my HTC One using XDA Premium 4 mobile app

matt95 said:
You need to download the file I posted, unzip it, navigate to that folder and then try to type exactly what I write
Code:
./fastboot
paste here what you get
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is what I get when I type ./fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default: 2048
Rebeccas-MacBook:~ administrator$

OK! fastboot is working, now do it again but type
Code:
./fastboot oem lock

matt95 said:
OK! fastboot is working, now do it again but type
Code:
./fastboot oem lock
Click to expand...
Click to collapse
Nope its still not working
Rebeccas-MacBook:~ administrator$ ./fastboot oem lock
-bash: ./fastboot: No such file or directory
Rebeccas-MacBook:~ administrator$ /Users/administrator/Downloads/android\ 3/fastboot ./fastboot oem lock
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default: 2048
Rebeccas-MacBook:~ administrator$

You have to type
Code:
./fastboot oem lock
not
Code:
3/fastboot ./fastboot oem lock

[Q] persist file flashing on nokia x

how to flash persist.img file in nokia x without computer? please tell me the directory of persist.img file?

atifnoor1122 said:
how to flash persist.img file in nokia x without computer? please tell me the directory of persist.img file?
Click to expand...
Click to collapse
no bro it can only done with the help of computer

why theres a user with similar nick thanking op for the question for no apparant reason? also thanking on every previous post. i smell spammer with multiple id harvesting thanks here.

osheen jha said:
no bro it can only done with the help of computer
Click to expand...
Click to collapse
but i can't flash the persist.img file with computer . I don't know the commands to flash this file
you tell me what commands i use??? step by step

atifnoor1122 said:
but i can't flash the persist.img file with computer . I don't know the commands to flash this file
you tell me what commands i use??? step by step
Click to expand...
Click to collapse
first install adb drivers for nokia x .... link provided in the post..
and download fastboot ..link provided in post.
1- open fastboot then type
Code:
adb devices
..then it will show ur devices..
2- then type
Code:
adb reboot bootloader
it will reboot ur device to bootloader mode
3- then type
Code:
fastboot -i 0x0421 devices
it will show your device
4 - then type
Code:
fastboot -i 0x0421 erase persist
5- then last
Code:
fastboot -i 0x0421 flash persist persist.img
make sure that persistimg is in the folder of fastboot

osheen jha said:
first install adb drivers for nokia x .... link provided in the post..
and download fastboot ..link provided in post.
1- open fastboot then type
Code:
adb devices
..then it will show ur devices..
2- then type
Code:
adb reboot bootloader
it will reboot ur device to bootloader mode
3- then type
Code:
fastboot -i 0x0421 devices
it will show your device
4 - then type
Code:
fastboot -i 0x0421 erase persist
5- then last
Code:
fastboot -i 0x0421 flash persist persist.img
make sure that persistimg is in the folder of fastboot
Click to expand...
Click to collapse
its working thanks for reply

atifnoor1122 said:
its working thanks for reply
Click to expand...
Click to collapse
ur welcome bro
\
press thnxxx if i helped u

fastboot -i 0x0421 flash splash1 splash1.img
Not found splash1 ,
Code:
fastboot -i 0x0421 flash splash1 splash1.img
sending 'splash1' (750 KB)...
OKAY [ 0.063s]
writing 'splash1'...
FAILED (remote: partition table doesn't exist)
finished. total time: 0.063s
Help please

it says cannot load................... what to do?? please reply...........
somak jha said:
first install adb drivers for nokia x .... link provided in the post..
and download fastboot ..link provided in post.
1- open fastboot then type
Code:
adb devices
..then it will show ur devices..
2- then type
Code:
adb reboot bootloader
it will reboot ur device to bootloader mode
3- then type
Code:
fastboot -i 0x0421 devices
it will show your device
4 - then type
Code:
fastboot -i 0x0421 erase persist
5- then last
Code:
fastboot -i 0x0421 flash persist persist.img
make sure that persistimg is in the folder of fastboot
Click to expand...
Click to collapse

varung said:
Click to expand...
Click to collapse
plzzz help.....during last comand , it shows (cannot load persist.img)

Where is fastboot folder
And provide the links to download above files
Sent from my Nokia_XL using XDA Free mobile app

somak jha said:
no bro it can only done with the help of computer
Click to expand...
Click to collapse
Hey buddy use this script
package_extract_file("persist.img", "/dev/block/platform/msm_sdcc.3/by-name/p16");
Edit
Bro impossible don't know why it can be flashed through TWRP after flashing I found that persist partition is not mounted.

you have to know where to open cmd
AhmedCH said:
plzzz help.....during last comand , it shows (cannot load persist.img)
Click to expand...
Click to collapse
bro, you have to know where to open cmd open the folder where you have persist.img file then press shift+right click , click open command window here. and after typing flash persist you have to mention the file name. for ex. if the file was named rm980_persist.img the code is adb ............................ flash persist rm980_persist.img.. This may help you . sorry for bad english

Amerull said:
you have to know where to open cmd
bro, you have to know where to open cmd open the folder where you have persist.img file then press shift+right click , click open command window here. and after typing flash persist you have to mention the file name. for ex. if the file was named rm980_persist.img the code is adb ............................ flash persist rm980_persist.img.. This may help you . sorry for bad english
Click to expand...
Click to collapse
I'm sorry but pls where can I find my persist.img and how can I do that, step by step guide pls.... Thank you

[SOLVED] Help needed: Unbrick zenfone 2 551ml

Hi a friend gave me her phone. Only thing I can do is load bootloader. No recovery and no OS. Just bootloader.
I can get it recognized by fastboot devices on my pc. I can get it to reboot into fastboot
When I try to flash recovery.img I get message FAILED (remote: Permission denied)
Anyone have any ideas what can be done?

Try Asus flash tool and a raw image. I believe you can find what you need in the resources thread.
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Try Asus flash tool and a raw image. I believe you can find what you need in the resources thread.
Click to expand...
Click to collapse
Thanks I just finished trying it. I got the same message that permission denied.
Maybe I need to unlock bootloader? But can't get into the OS.

lollyjay said:
Thanks I just finished trying it. I got the same message that permission denied.
Maybe I need to unlock bootloader? But can't get into the OS.
Click to expand...
Click to collapse
extract raw file. place adb fastboot in same folder. open command prompt in same folder and run following commands
1. fastboot devices ( see if it is recognized: else plug out usb and plugin again)
2. fastboot oem erase_osip_header
3. fastboot oem erase_token
4. fastboot oem start_partitioning
5. fastboot flash /tmp/partition.tbl partition.tbl
6. fastboot oem partition /tmp/partition.tbl
7. fastboot erase system
8. fastboot erase cache
9. fastboot erase data
10. fastboot erase APD
11. fastboot erase ADF
12. fastboot oem wipe splashscreen
13. fastboot oem stop_partitioning
14. fastboot flash fastboot droidboot_sign.bin
15. fastboot flash token PROD_BOM_Full.bin
16. fastboot flash ifwi ifwi-prod.bin
17. fastboot flash splashscreen splash_sign.bin
18. fastboot flash boot boot_sign.bin
19. fastboot flash recovery recovery_sign.bin
20. fastboot flash APD APD.img
21. fastboot flash system system.img
22. fastboot reboot

Thanks @sukhwant717 I will try this today and report back.

@sukhwant717 I don't know how to extract a .raw file
Nvm I just remembered that I just change raw to zip :silly:

OK here's what happened :
2. fastboot oem erase_osip_header OKAY
3. fastboot oem erase_token FAILED (remote: unknown OEM command)
4. fastboot oem start_partitioning OKAY
5. fastboot flash /tmp/partition.tbl partition.tbl FAILED
(remote: Permission denied)

lollyjay said:
OK here's what happened :
2. fastboot oem erase_osip_header OKAY
3. fastboot oem erase_token FAILED (remote: unknown OEM command)
4. fastboot oem start_partitioning OKAY
5. fastboot flash /tmp/partition.tbl partition.tbl FAILED
(remote: Permission denied)
Click to expand...
Click to collapse
Are you running these commands as administrator?
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Are you running these commands as administrator?
Click to expand...
Click to collapse
Derp!

lollyjay said:
Derp!
Click to expand...
Click to collapse
Is that derp on me or you? Lol
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Is that derp on me or you? Lol
Click to expand...
Click to collapse
Me. Hopefully I can blame it on my age

lollyjay said:
Me. Hopefully I can blame it on my age
Click to expand...
Click to collapse
Lol. I'm not a youngin myself.
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Is that derp on me or you? Lol
Click to expand...
Click to collapse
Still getting unknown oem command after "fastboot oem erase_token"

Bottom line: Even as Administrator Still getting "Permission denied"
Looks like I'm screwed :crying:

I tried placing a twrp backup on the sd card, then fastboot boot twrp.img and got into twfp recovery.
When I tried to restore the backup I get message "Cannot restore System - - mounted read only" Dammit

Also tried adb sideload of stock firmware. Proceeds to writing splashscreen image, but then gives:
mount: failed to mount /dev/block/by-name/system at /system: Device or resource busy
symlink: some symlinks failed
Updater process ended with ERROR: 7

lollyjay said:
Also tried adb sideload of stock firmware. Proceeds to writing splashscreen image, but then gives:
mount: failed to mount /dev/block/by-name/system at /system: Device or resource busy
symlink: some symlinks failed
Updater process ended with ERROR: 7
Click to expand...
Click to collapse
have smoke n make a brew
http://forum.xda-developers.com/zenfone2/general/unbrick-vid-tutorial-restore-serial-t3411064

timbernot said:
have smoke n make a brew
http://forum.xda-developers.com/zenfone2/general/unbrick-vid-tutorial-restore-serial-t3411064
Click to expand...
Click to collapse
I'm having both :crying:
The phone was free and worth every penny

lollyjay said:
I'm having both :crying:
The phone was free and worth every penny
Click to expand...
Click to collapse
Try flashing .184 raw file in your bootloader from here http://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
or quicker ,this one > .184 > 5th one down https://yadi.sk/d/FijRoAVJtvRiG
and with the flashtool in above my first link,with mediafire links , fastforward in video to 2:17 mins in to flashing in flashtool procedure in bootloader - remember to tick erase data ....
if doesnt work - remove flashtools and try the xFSTK in above link and full procedure

Thanks @timbernot but now all I get when I press the power button is two vibrates and totally blank screen.

FastbootD mode

i'm on stock 10.0.12 firmware using r30.0.4 platform tools. when i'm in bootloader mode and type fastboot reboot fastboot i get just fastboot help:
PS F:\ONEPLUS 7T\platform-tools_r30.0.4-windows\platform-tools> fastboot reboot fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> [ <second> ] ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ] create bootimage and
flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
PS F:\ONEPLUS 7T\platform-tools_r30.0.4-windows\platform-tools>
how can i enter fastbootD mode?

To enter in fastbootd you need the newest platforn-tools aka adb and fastboot files
When you got that you reboot to bootloader(fastboot mode) and then use the fastbootd
Just use google tobsearch for fastbootd op7t
---------- Post added at 08:37 AM ---------- Previous post was at 08:35 AM ----------
Or look closely here
https://forum.xda-developers.com/oneplus-7t/how-to/rom-stock-fastboot-roms-oneplus-7t-t3979213
It gives link to latest platfom-tools

Makerrr said:
To enter in fastbootd you need the newest platforn-tools aka adb and fastboot files
When you got that you reboot to bootloader(fastboot mode) and then use the fastbootd
Just use google tobsearch for fastbootd op7t
---------- Post added at 08:37 AM ---------- Previous post was at 08:35 AM ----------
Or look closely here
https://forum.xda-developers.com/oneplus-7t/how-to/rom-stock-fastboot-roms-oneplus-7t-t3979213
It gives link to latest platfom-tools[/QUOTE
thanks for your reply but i think that platform tools r30.0.4 is the newest platform tools. if u know abt newest one and be kind enough to give the link i'll be more than grateful
Click to expand...
Click to collapse

That's the latest one.
You should be able to boot fastbootd!
When in fastboot mode run fastboot reboot fastbootd
And your device should reboot in a stock recovery looking environment, that's fastbootd

Makerrr said:
That's the latest one.
You should be able to boot fastbootd!
When in fastboot mode run fastboot reboot fastbootd
And your device should reboot in a stock recovery looking environment, that's fastbootd
Click to expand...
Click to collapse
maybe it should but it doesn't. that's how my problem started.

altojd said:
maybe it should but it doesn't. that's how my problem started.
Click to expand...
Click to collapse
Execute command with .exe once you're in the folder like fastboot.exe reboot fastboot

Lossyx said:
Execute command with .exe once you're in the folder like fastboot.exe reboot fastboot
Click to expand...
Click to collapse
did it and nothing has changed. the problem remains

have you found a solution to this? i am unable to get onto fastbootd mode
C:\platform-tools>adb reboot fastboot
C:\platform-tools>fastboot getvar is-userspace
is-userspace: no
Finished. Total time: 0.009s

I'm having a similar problem: I can get into fastbootd (chinese/english menu), but I can't send any fastboot commands, it always just says "waiting for device" and 'fastboot devices' shows nothing. If I try to flash things half will fail with "partition not found" because I can only flash in fastboot, not fastbootd. Once flashed I only get bootloader booting message and then it crashes into Qualcomm CrashDump mode and all I can do is wait and then hours later it's magically back to fastbootd but still can't send commands to it, even though OnePlus_USB_Drivers_Setup.exe is installed. Any ideas??

I had issues until used the all in one tool to flash it, then it worked perfect.

thetoady said:
I had issues until used the all in one tool to flash it, then it worked perfect.
Click to expand...
Click to collapse
is fastbootd any good? i tried to use fastboot devices and getvar all command but does not do anything this on lg v60

altojd said:
i'm on stock 10.0.12 firmware using r30.0.4 platform tools. when i'm in bootloader mode and type fastboot reboot fastboot i get just fastboot help:
PS F:\ONEPLUS 7T\platform-tools_r30.0.4-windows\platform-tools> fastboot reboot fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> [ <second> ] ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ] create bootimage and
flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
PS F:\ONEPLUS 7T\platform-tools_r30.0.4-windows\platform-tools>
how can i enter fastbootD mode?
Click to expand...
Click to collapse
Reflash stock recovery, then fastboot reboot fastboot to get into fastbootd

HueyT said:
Reflash stock recovery, then fastboot reboot fastboot to get into fastbootd
Click to expand...
Click to collapse
where is stock recovery?

can someone explain me the use for fastbootd, in my case i seem to have regular fastboot and fastbootd. in fastbootd i cant execute any commands. its completely new to me and i havent found any proper documentation or tutorials going in depth with it so its all just going over my head.

HueyT said:
Reflash stock recovery, then fastboot reboot fastboot to get into fastbootd
Click to expand...
Click to collapse
I'd be surprised if reflashing the stock recovery magically fixed the problem.

Makerrr said:
That's the latest one.
You should be able to boot fastbootd!
When in fastboot mode run fastboot reboot fastbootd
And your device should reboot in a stock recovery looking environment, that's fastbootd
Click to expand...
Click to collapse
i have installed twrp recovery so am i able to go in fastbootd mode?

FakeGemstone said:
I'd be surprised if reflashing the stock recovery magically fixed the problem.
Click to expand...
Click to collapse
fastbootd is apart of recovery on many devices.
"The bootloader is expected to load and boot into the recovery image upon seeing boot-fastboot in the BCB command. Recovery then parses the BCB message and switches to fastbootd mode."

shaniKhan0 said:
i have installed twrp recovery so am i able to go in fastbootd mode?
Click to expand...
Click to collapse
If your TWRP is newer then you can still enter fastboot from TWRP, on my device using "adb reboot fastboot" will reboot my device into TWRP then enter some weird TWRP fastboot mode. However windows doesn't seem to detect that this is a device in ADB/Fastboot mode and won't load drivers so if you're on windows you'd have to enter device manager, browse for drivers, "let me pick from all available drivers" find google inc (Assuming you already have those drivers) and select android debugging interface drivers and install. After that your device should work just fine and "getvar is-userspace" should return "yes"

Brandon.Bissonnette said:
If your TWRP is newer then you can still enter fastboot from TWRP, on my device using "adb reboot fastboot" will reboot my device into TWRP then enter some weird TWRP fastboot mode. However windows doesn't seem to detect that this is a device in ADB/Fastboot mode and won't load drivers so if you're on windows you'd have to enter device manager, browse for drivers, "let me pick from all available drivers" find google inc (Assuming you already have those drivers) and select android debugging interface drivers and install. After that your device should work just fine and "getvar is-userspace" should return "yes"
Click to expand...
Click to collapse
not working....facing same problem . on oneplus 8T. can you suggest something