Hi,
I have just bought a 32GB SD Card from Amazon. Komputerbay Class 10.
I have been running Sandvold's ICS ROM for the last month and all was fine, but I wanted a faster SD card.
I used Easeus Partition Manager using Windows XP and I created a 1GB ext2 partition after a FAT32 Partition.
However, I made it logical and wasn't able to change it to Primary, so I created another ext2 partition, this time Primary.
So, FAT32 partition of 28GB ish Primary, ext2 of 1GB Primary then ext3 of 1GB logical.
However, although my PC can see the FAT32 partition, my Desire cannot.
It can however see it in recovery which allowed me to flash the ROM etc.
Any ideas please?
Cheers
do NOT use any windows programs... try gparted live cd or 4ext recovery
and ONE more thing-both partition need to be PRIMARY
kotag82 said:
do NOT use any windows programs... try gparted live cd or 4ext recovery
and ONE more thing-both partition need to be PRIMARY
Click to expand...
Click to collapse
They are both primary, it's the extra one that is logical.
I may well try running Linux on my laptop alongside Windows to try that.
just boot it from cd or usb or virtual machine
kotag82 said:
just boot it from cd or usb or virtual machine
Click to expand...
Click to collapse
I'll try that.
Do you know if I can use Damn Small Linux please?
Cheers
Hi,
I partitioned my SDcard with Partition Wizard Home Edition 7.1
Just make sure all partitions are PRIMARY and there is NO (free) space before or between partitions. If you made the FAT32 first as a logical partition and later switched it to primary, there might be a small free space before it.....
Just wipe the whol card and repartition it with first the FAT32 PRIMARY and then the EXT partition PRIMARY. This should work.
As they told use linux from cd.
It's easy e fast
Create fat32 primary first, then ext2,3,4 primary.
I'll do it a lot of time and always work
GPart Live worked a treat.
Easy too with You Tube to help.
The drivers on the laptop I was using rendered the screen almost unseeable, but I managed to get it done and it was clear as day at home.
Related
This post is for people scared of Linux (like me)
I finally found a way to partition a SD-Card under Windows. I tried more tools, but only one was able to work with SD-Cards. Here's what you need to do:
1. Download and install MiniTool Partition Wizard (google it, i cant post links)
2. Resize original FAT32 partition to make room for the ext3 one. If you have enough space, the data on the card shouldn't be affected, but make a back-up just in case.
3. Create the ext3 partition on the space made available and apply changes
The first partition should be FAT32, and the second ext3, make sure you have them in this order.
Kneros said:
This post is for people scared of Linux (like me)
I finally found a way to partition a SD-Card under Windows. I tried more tools, but only one was able to work with SD-Cards. Here's what you need to do:
1. Download and install MiniTool Partition Wizard (google it, i cant post links)
2. Resize original FAT32 partition to make room for the ext3 one. If you have enough space, the data on the card shouldn't be affected, but make a back-up just in case.
3. Create the ext3 partition on the space made available and apply changes
The first partition should be FAT32, and the second ext3, make sure you have them in this order.
Click to expand...
Click to collapse
Almost all custom partition managers can do this in Windows-Partition Magic, Paragon, Or Gparted with VMWare
They can, but not on SD Card. Windows doesn't support partitions on memory cards. I tried Partition Magic, Paragon, Easeus, none of them work.
I didn't try Gparted with VMWare tho, you might be right about that.
Kneros said:
They can, but not on SD Card. Windows doesn't support partitions on memory cards. I tried Partition Magic, Paragon, Easeus, none of them work.
I didn't try Gparted with VMWare tho, you might be right about that.
Click to expand...
Click to collapse
Paragon works for me on Windows..And Gparted is what I use
Strange, it didn't work for me (see attached pics).
Just install the latest ClockworkMod, or Amon-RA and do it through recovery.
Is it useful to have an ext3 partition on SD card with stock 2.2 rom ?
fblasot said:
Is it useful to have an ext3 partition on SD card with stock 2.2 rom ?
Click to expand...
Click to collapse
It's useless, you need a ROM that supports it.
quick question - if I create an ext3 partition using this method or any other way, and then move the apps I had on SD (the old way) back to internal, will it then move them to the ext3 partition automatically? I just want to make sure I have this right myself before I attempt it.
I'm using Oxygen 2.3 ROM RC-6 which supports apps2sd etc.
thanks in advance for any replies.
Kneros said:
Strange, it didn't work for me (see attached pics).
Click to expand...
Click to collapse
See mine..
I'm using 9.0 Pro, you're using 10.0 server, if that helps..
I still prefer Gparted though..On Vmware.
Choronzonix said:
quick question - if I create an ext3 partition using this method or any other way, and then move the apps I had on SD (the old way) back to internal, will it then move them to the ext3 partition automatically? I just want to make sure I have this right myself before I attempt it.
I'm using Oxygen 2.3 ROM RC-6 which supports apps2sd etc.
thanks in advance for any replies.
Click to expand...
Click to collapse
The a2sd+ script is built in, it executes at installation. Best way would be to use Titanium to backup ur froyo a2sd apps, wipe+install a2sd+ custom rom, use the option of Titanium, to move to sd.
and how do you want to put data on the ext3 partition ? ... you will need linux, its the best way...
Kneros said:
This post is for people scared of Linux (like me)
I finally found a way to partition a SD-Card under Windows. I tried more tools, but only one was able to work with SD-Cards. Here's what you need to do:
1. Download and install MiniTool Partition Wizard (google it, i cant post links)
2. Resize original FAT32 partition to make room for the ext3 one. If you have enough space, the data on the card shouldn't be affected, but make a back-up just in case.
3. Create the ext3 partition on the space made available and apply changes
The first partition should be FAT32, and the second ext3, make sure you have them in this order.
Click to expand...
Click to collapse
EDIT:
Didn't work, SD could not be mounted under Android or Clockworkmod
Did the partitioning under Clockworkmod
partition works, but..
i tried minitool and easueus, both partiotion my 16 gb sd card, but...
I use miui rom, xpart(data2ext). the script works, but the phone is slow as ........
someone any idea?
i also have a 8 gb card, same partitions, but no problem..
any idea how i can tets my 16 gb card?
Minitool is crap. Haven't used easeus but its still under Windows, which is a no no
Gparted is the only decent tool that will nicely partition an ext partition on your sd whilst aligning it properly. This is both my personal and professional opinion.
Now because it doesn't run in windows, its a bit more long winded but so much more worth while.
Virtual machine (vmware player) is the best method. There is a link to a guide to set this up in my signature
Sent from my HTC Desire using XDA App
Kneros said:
This post is for people scared of Linux (like me)
I finally found a way to partition a SD-Card under Windows. I tried more tools, but only one was able to work with SD-Cards. Here's what you need to do:
1. Download and install MiniTool Partition Wizard (google it, i cant post links)
2. Resize original FAT32 partition to make room for the ext3 one. If you have enough space, the data on the card shouldn't be affected, but make a back-up just in case.
3. Create the ext3 partition on the space made available and apply changes
The first partition should be FAT32, and the second ext3, make sure you have them in this order.
Click to expand...
Click to collapse
Minitool partition wizard is a wonderful and practical software. Thanks!!
Hi there,
I have a little problem with a2sd.
I partitioned my 16 GB sd-card to 15GB Fat32 and 1 GB ext3.
My actual rom is AuraxTSense-8.1.1. Everything is fine ... the Desire says
640 MB ram left for applications ... that's ok.
Same when I flash MIUI. All is ok ... ok MIUI is not my favorite rom, so I want to flash the new AuraxTSense_8.4_Official_OTA_2.2_FRF91_A2SD+.zip, but there is
the problem. This rom did not notice my ext3 partition for apps, although it is an A2SD+. Same with LeeDrOiD_V2.4_A2SD.zip. On all flashing session I did a full wipe.
Now I'm back to the AuraxTSense-8.1.1 with working A2SD.
I searched the inet and forum, but I didn't find any good clue. Only hints how
to partition the sd-card. And my partition seems to be ok.
Hmm ... anyone any hint for me? AuraxTSense-8.1.1 is a bit unstable, it reboot without any reason once a day, MIUI is not mine ... I love sense ...
Thanks for your help ....
TechZombie ...
Possibly wrongly partitioned?
Try to re-partition it.
Download Gnome Partition Editor (GParted Live) here on CD or USB.
Read the documentation at on GParted website ~ how to partition your drive? (Most answers of your questions are there).
Backup your SD card data to PC before start partitioning.
Boot into GParted Live on CD or USB (Make sure that your motherboard first boot is either CD or USB).
Follow onscreen instructions to get GParted Live loaded.
Note – select your SD card as the drive. DON’T select your hard drive.
Delete every partition on SD card.
First create a primary FAT32 partition.
Then create another primary ext(2,3 or 4) partition ~ 1GB or more.
Exit GParted Live and back to Windows.
Copy back your data to SD card.
Click to expand...
Click to collapse
davebugyi said:
Possibly wrongly partitioned?
Try to re-partition it.
Click to expand...
Click to collapse
please try this:
Take a Usb-stick.
! YOUR DATA FROM YOUR STICK WILL BE LOST, BACKUP BEFOR GPARTED INSTALL!
! BACKUP YOUR DATA FROM YOUR DESIRE SD-CARD, ALL DATA WIL BE LOST USING THIS METHOD!
Download gparted, install it using unetbootin.
start gparted form your usb-stick.
Mount your sd-card in clockwork-recovery.
Remove all partitions in GParted from your desire sd-card.
create a new partition form about 1Gb ext-4.
then create a new partition (fat-32) that fils the rest of your sd-card.
Note: the ext-4 partition needs to be in front of the fat-32 partition.
restore your desire sd-card data.
I hope this helps
@davebugyi: This was the exact way I partitioned my sd-card ... strange ...
@Keon91: The ext4 partition before the fat32? I thought ext after fat ... ok let's give a try ... must it be ext4 or is ext3 ok? I heard ext4 reduces sd-card life?
Thanks ....
TechZombie ...
as I can remember I had my ext4 partition in front of my fat32 partition.
when I view my partions in gparted ext4 is in front of fat32.
fat32 has label : sba1.
ext4 has label : sba2.
I never heard ext4 would reduce sd-card life. In the insertcoin thread they recommend a ext4 partition.
Finnaly I solved it ...
First I tried ext4 in from of fat32. Problem: Windows didn't notice the fat32 partition.
@Keon91: The lables of your partitions show that in your configuration the fat32 is also in front of the ext partition.
After this, I partitioned again with gparted to 15gb fat32 and 1gb ext3 ... both primary ... and now ... i don't know why ... the ext3 is found by a2sd ...
Thanks to all ...
TechZombie ...
I've already partitioned my SD Card with Fat 32 and 512mb Ext 3.
The problem I have now is some of the ROM's I like suggest having a 1gb Ext3 or 4 partition. How easy is it to repartition? How do I back up what's on the Ext 3 partition (I'm guessing though that I can't without a Linux OS on my PC)?
xybadog said:
I've already partitioned my SD Card with Fat 32 and 512mb Ext 3.
The problem I have now is some of the ROM's I like suggest having a 1gb Ext3 or 4 partition. How easy is it to repartition? How do I back up what's on the Ext 3 partition (I'm guessing though that I can't without a Linux OS on my PC)?
Click to expand...
Click to collapse
in order to repartition you would have to use some other recovery (AmonRA or newer clockworkmod perhaps) that has the option to make 1GB ext partition.
regarding backup - NANDROID backups SD-EXT, and every recovery has an option of restoring some partos of bacup only (like only sd-ext but i think you dont need that since you want to change ROM) other option is to use a linux os, dont worry you dont have to install it on PC, generally you can run linux from a CD and make changes on EXT as you wish (again i dont know what would you like to do there)
if you dont want to / cant update recovery, download program Gparted LiveCD, and burn it to a CD. it will be bootable, boot it on your PC, then plug phone while in recovery with USB Mass storage enabled, choose the SD card in gparted, and expand your 512mb ext to 1gb ext3/4 partiton (still after the FAT32)
http://www.partitionwizard.com/download.html I'd reccommend using a partition tool from your PC, more reliable in my opinion ^_^
Vid on how to use it:
www.youtube.com/watch?v=D6vVLbtXJdg
Actually partitioning to EXT under windows cause only problems.
Use gParted or recovery from my signature.
k3lcior said:
Actually partitioning to EXT under windows cause only problems.
Use gParted or recovery from my signature.
Click to expand...
Click to collapse
Oh, we learn something new everyday
k3lcior said:
Actually partitioning to EXT under windows cause only problems.
Use gParted or recovery from my signature.
Click to expand...
Click to collapse
Well... aint I the lucky one then.
Partitioned 30 times under windows, with MiniTool Partition Wizard Home Edition, and never had any problems. And I have flashed A LOT!
So that aint all true!!!
Jakedude2011 said:
Well... aint I the lucky one then.
Partitioned 30 times under windows, with MiniTool Partition Wizard Home Edition, and never had any problems. And I have flashed A LOT!
So that aint all true!!!
Click to expand...
Click to collapse
Just read forums more often, you'll find numerous people having a bootloop after partitioning under windows.
I have been fighting with this for some time but finally figured it out.
To get Link2SD working I had to format my first partition as FAT (aka Fat16 - NOT Fat32!). The second (for Link2SD afaik) was Ext2. I tried Fat32 but couldn't get that working so stuck with Ext2 for partition 2. I'm using Windows on my main PC so used minitool partition wizard home edition to create the partitions. Minitool is brilliant freeware for Windows, for ages one had to boot linux to fiddle with other than Windoze partitions.
I hope this helps someone else - I was pulling my hair out!! Perhaps a sticky??
how large was your second partition? I'm using minitool and didn't see an option for fat 16
ryanpl said:
how large was your second partition? I'm using minitool and didn't see an option for fat 16
Click to expand...
Click to collapse
I also used Minitool - what I did was Create my first FAT partition of 3 Gb, then my second FAT32 partition of 1Gb. 1Gb for Link2SD and 3Gb for data - I was thinking that's enough. *EDIT* Fat32 wasn't being mounted properly so I changed partition 2 to Ext2 and it's working fine now.
Minitool calls it FAT as opposed to FAT32. FAT = Fat16. HTH
Oh I have a 16gb card I'm trying to use.
BTW, how much of the original memory is allocated for apps? Has someone ever reached it?
Please direct me to an idiots guide to SD partitioning...
I have been flashing my desire since the summer. And well i forgot how i initially setup my SD card.
I wanted to treat my self to a new CLASS 10 SD card. But when it came to partitioning the card i got lost.
Is it as simple as using clockworkmod to set partition size to 1-2Gigs? and swap to 0?
With reference to Ext2,ext3 and ext4 are these all multiple partitions? None of these where options within clockwork or rom manager
Anyway i did my partitions using clockwork and installed a new rom i had never used before runnymede. I found performance extremely sluggish and slow. Of course i did 3 new things at once. new card,new partition and new rom... could be one or all these causing me headaches..
Sorry to ramble on. Bottom line:
- Could i be kindly directed to a SD partitioning guide?
- Is the Desire compatible with 2,4, and 10?
http://forum.xda-developers.com/showthread.php?t=1016084
[Video Tutorial] Noob Proof Everything Desire Guide UPDATED [04/04/11][Video Tut]
hope it helps.
The class 10 SD card should be OK with your desire.
The people in the know mostly recommend not using ROM Manager to partition SD cards. I would suggest try using GParted.
In terms of ext2, 3, 4 - I would recommend ext 3 for your SD card partition - it is safer than ext 2 partitions.
I would suggest an ext 3 partition size of 1024mb or even 2048mb (that should cover you for most present roms and most future roms).
I am not as knowledgeable as some of the other guys here but I will give you an useful link:
http://www.techcredo.com/android/tu...-for-a2sd-with-gparted-on-a-windows-pc-ext234
I usually create a bootable GParted USB drive and use to partition my SD cards.
I hope that helps,
KKH
I have been trying to create an ext4 partition using GParted. I did all necessary steps - will quickly run thru, just so you know:
1. Burnt ISO and accessed thru boot menu (running XP/SP3, btw)
2. Deleted existing allocation.
3. Created new primary partition as FAT32
4. Allocated "free space following" as 1024
5. Specified the unallocated memory (1024) as ext4.
There was no error in the operation.
However... When I tried to load stuff to the SD card, Windows prompted me to format the card before using. It made no sense but I couldn't do anything. And by formatting it, I lost everything that GPL had done in the first place.
I went over the process again, to no avail.
Does anyone know where I've possibly gone wrong? Please help.
Which recovery are you using?
I had the same issue, vista kept asking me to format SD card before use.
I fixed this by making my first partition in GParted the fat32 and the second partition ext3.
I think windows accesses the first partition by default and is happy with fat32.
If your ext4 was the first partition, windows would ask to format that ext4 in to fat32 before use.
I hope that helps.
thanks i should be good to go now..
TKG26 said:
thanks i should be good to go now..
Click to expand...
Click to collapse
If you install 4EXT Recovery, you won't ever need a bootable disk to partition your SD card. You'll be able to do it straight from recovery I suggest you to give it a try!
My recovery is 4ext and I used this recovery to make partitions of my class10 sd card.
I also use this recovery to align my partitions.
You can also use the freeware "minitool partition wizard" under win xp instead of gparted.
Good luck.
harm007 said:
You can also use the freeware "minitool partition wizard" under win xp instead of gparted.
Good luck.
Click to expand...
Click to collapse
If the OP uses this tool, he needs more than good luck. It's like rootSU says in his sig: "Don't be lazy and make GParted your first choice...". So please do not trust in windows software which wants to handle linux partitions.
Use rom manager. Simple as that
Sent from my Full Android on Bravo using XDA App
4ext recovery and have not gone back. Does all the dirty work for me.
Sent from my HTC Desire using Tapatalk