Develop Bugs

Need to flash the kernel too?

Awesome job on the ROM as always! Sucessfully flashed the ROM and the latest modem bin.
Only question: on the first post of the CleanGB thread, there is a link to the CleanGB kernel (in addition to full version). Do I need to flash that as well?
Sent from my SPH-D700 using xda premium

jnevans said:
Awesome job on the ROM as always! Sucessfully flashed the ROM and the latest modem bin.
Only question: on the first post of the CleanGB thread, there is a link to the CleanGB kernel (in addition to full version). Do I need to flash that as well?
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
No the kernel is included in the rom for Clean GB. Next time post within the Clean GB thread and ask. Also seems like maybe your new to this so be very careful! You may always send me a message if you have question about your phone. I'd rather help people before they mess up there phone than after it becomes a paperweight
Sent from my SPH-D700 using Tapatalk

Unfortunately, I don't have the privs to post in the Epic4G Android Development forum where I could have asked directly on the thread. Hence, the reason I asked here instead.

jnevans said:
Unfortunately, I don't have the privs to post in the Epic4G Android Development forum where I could have asked directly on the thread. Hence, the reason I asked here instead.
Click to expand...
Click to collapse
jn, dont' worry , it's cool... travis might have forgotten thats what the q/a thread is for. it takes sometime to learn your way around here.

The kernel in the full version of the latest CleanGB ROM shows a different version number than the link to the kernel only flash file.
That was the other thing that prompted my question.
Sent from my SPH-D700 using xda premium

[Q] Stock SystemUI.apk

Can anyone post the stock SystemUI.apk from the latest leak?
Thanks!
Sent from my SPH-D710 using xda premium

I'm pretty sure nobody uses the last leak, at least the stock one. I always use agat's rom cause it is themed and I would post that systemui apk forbu but I'm on el26 no where near latest leak
If you flashed a .zip to get your rom just use root explorer to pull the .apk from there
Sent from my SPH-D710 using xda premium

Just reflash your rom and it will be back to normal.
Sent from my SPH-D710 using Tapatalk

Sometimes I modify my from after flashing it
Ex. Add ringtones remove charger connected sounds
Those changes dissaper when reflashing so pulling the apk would be a better idea in my opinion
Sent from my SPH-D710 using xda premium

OP had already moved on and flashed cm9, see here http://forum.xda-developers.com/showthread.php?t=1682425
Now this is just my opinion so please if you are offended my apologies in advance. I do agree on your points that the general section do get cluttered with questions, but I have to state that asking for systemUI.apk seem's more like a request out of laziness instead of an actual question & answer. Like as was stated above you could simply reflash your rom real quick. Pull out the systemUI.apk from the rom and repush. You had manage to flash your phone to the latest leak so apparantly to me I see that you are quite capable of actually heading over to the dev section again to download what you needed. Another thing is latest leak doesn't seem to be specific enough of a question, since I would have to ask what exact leak you are on to even attempt to do the dirty work and upload and link it for you, that is due to the nature of so many leaks and builds and variations of leaks such as sfhubs, agats, barnacles10 stock deodex.

Custom Kernels?

I just got the Epic4GTouch and i was wondering where the heck all the custom kernels were. You know the ones that help you start intergalactic war and such? Any help lol? Thanks

You can apply the guts of this to get a better understanding. Good info:
What Is ClockworkMod And How To Use It [Complete Guide] [VeNuM]
With that, give this a read as well if you already haven't:
How Not To Brick Your E4GT
Good stickies in the General Section.

MoHoGalore said:
You can apply the guts of this to get a better understanding. Good info:
What Is ClockworkMod And How To Use It [Complete Guide] [VeNuM]
With that, give this a read as well if you already haven't:
How Not To Brick Your E4GT
Good stickies in the General Section.
Click to expand...
Click to collapse
So at the moment there aren't any ICS kernels for the Epic 4g Touch? Also when he says dont wipe if your are on ICS what does he mean? Dont wipe cache? what? Thanks

The stickies in Dev section has this. And i do apologize. For some reason my comprehension level has reduced significantly lately. You asked where, not what. Here's a repository done by Rwilco:
http://forum.xda-developers.com/showthread.php?p=26295021
Just read about how not to brick and about the emmc bug thread. Both stickies.
And read the combination that's feared to have started the bricks again.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

MoHoGalore said:
The stickies in Dev section has this. And i do apologize. For some reason my comprehension level has reduced significantly lately. You asked where, not what. Here's a repository done by Rwilco:
http://forum.xda-developers.com/showthread.php?p=26295021
Just read about how not to brick and about the emmc bug thread. Both stickies.
And read the combination that's feared to have started the bricks again.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
**** all those kernels are a lot of confusion lol im scared to brick my phone now lol. Well im running the Paranoid 2.16, could you suggest me maybe a good kernel to flash for that rom? Thanks man all your help is much appreciated!

I don't remember is paranoid ICS? If so look for agat's 0.54 kernel it's his newest one. Its perfectly safe I've personally used it several times switching between GB, ICS and JB and never once had an issue.
Sent from my SPH-D710 using xda app-developers app

treyweez11 said:
**** all those kernels are a lot of confusion lol im scared to brick my phone now lol. Well im running the Paranoid 2.16, could you suggest me maybe a good kernel to flash for that rom? Thanks man all your help is much appreciated!
Click to expand...
Click to collapse
El26 cwm. The easiest easy i have found to keep up is just reading the thread of the ROM. I mean that in all sincerity.
When in doubt, use el26.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

dmonger11b said:
I don't remember is paranoid ICS? If so look for agat's 0.54 kernel it's his newest one. Its perfectly safe I've personally used it several times switching between GB, ICS and JB and never once had an issue.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Yeah sorry the 2.16 is JB. So that particular kernel works with JB? Sweet Thanks brotha
Edit, it say that those kernel can only be used with TW(touchwiz) right?

MoHoGalore said:
El26 cwm. The easiest easy i have found to keep up is just reading the thread of the ROM. I mean that in all sincerity.
When in doubt, use el26.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
EL26 CWM? Is that a stock kernel, custom? Who make that. Ill search it too! Thanks

Is right at the top of the link. Not sure if you're running the cwm6 with what you have now.
There's also the direct boot el29.
And depending on what you're doing can change recommendations.
Going from jb to jb, jb to ics, ics to whatever.. Etc.
But i stand by el26 cwm5 by chris41g if im going to recommend something.
Personally, i use agats and rj's kuban kernels. But I'm not usually running aosp or aokp builds unless i just want to try for a few hours.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

treyweez11 said:
Yeah sorry the 2.16 is JB. So that particular kernel works with JB? Sweet Thanks brotha
Edit, it say that those kernel can only be used with TW(touchwiz) right?
Click to expand...
Click to collapse
No it doesn't work with JB. Your phone will not boot if you ODIN EL26 kernel. If you are looking for custom kernels for OC, UV, Governors, etc, etc for JB there are none.

Post edited: OP is posting in the PA thread..

What's cwm5 cwm6?
Sent from my SPH-D710 using Tapatalk 2

[Polls] Can TMO Note2 user use ATT Note2 ROMs? Check this out!

Can tmo note II user use Att note II roms?
Take the poll and Write which rom worked for you, and i will add to below
PLEASE FLASH AT YOUR OWN RISKS, PEOPLE WHO CONTRIBUTED IN THIS DISCUSSION DOES NOT HOLD RESPONSIBILITY TO WHAT YOU MIGHT DO TO YOUR DEVICE!!
I can add what roms work below.
Myself: TMO
- CleanRom by scrosler, here is the link
- Flashed Tmo Modem
- Flashed Tmo Persus Kernel
- Using TWRP Recovery
sanchitgrover:
- CleanRom
rail205: Telus
- CleanRom
Warrior1975:
- JellyBeer
- May or may not have bluetooth issue!
mojorisin7178:
- JellyBeer
D_one:
- JellyBeer
Sent from my SGH-T889 using xda premium

No, do not do this unless you want a very expensive paper weight
Sent from my GT-I9100
If I helped you, please hit the thanks button!

the miui rom from att note 2 works on the tmobile note 2 and so does cm10/ jellybeer

I posted on the CleanRom thread, and the op said radio is not included so maybe that will work too?.???
Sent from my SGH-T889 using xda premium

AngryDinosaur said:
I posted on the CleanRom thread, and the op said radio is not included so maybe that will work too?.???
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Same with jelly beer no modem ...really all will work. If your worried just flash the rom then flash the modem.. BTW if it didn't work it won't kill the phone just flash another rom or restore
Sent from my SGH-T889 using xda premium

Just flashed jelly beer before. Works perfectly.
Sent from my Nexus 7 using XDA Premium HD app

ramnex said:
No, do not do this unless you want a very expensive paper weight
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
Please don't reply to a question if you don't know the correct answer.
Sent from my SGH-T889 using xda premium

I apologise. It didn't occur to me that the chipsets were the same, unlike previous Samsung releases
Sent from my GT-I9100
If I helped you, please hit the thanks button!

The answer is yes... I ported the other way around... T889 Stock ROM to I317...
http://forum.xda-developers.com/showthread.php?t=2026569
Sent from my SGH-T889 using XDA Premium HD app

Someone said they have the AT&T Jellybeer rom running perfectly on our T889, I need to flash our modem though, correct? Does anyone have a zip link to one, I can't seem to find a recovery flashable one? I'm kind of excited now, since our forum seems so quiet.
TerrorCandii Inc.

TerrorCandii said:
Someone said they have the AT&T Jellybeer rom running perfectly on our T889, I need to flash our modem though, correct? Does anyone have a zip link to one, I can't seem to find a recovery flashable one? I'm kind of excited now, since our forum seems so quiet.
TerrorCandii Inc.
Click to expand...
Click to collapse
No need to flash a modem. Clean install first, then just flash the rom and flash gapps. I'm currently running Jelly Beer. :good:

I have Jelly Thunder running fine on mine, I just stayed in recovery and flashed Persius kernel for our device after flashing the ROM, everything working here.
Sent from my SAMSUNG-SGH-T889 using xda premium

Wait, the modem is the same? So not used to having a phone with the same specs, Lol. I do have to flash a different kernel though?
TerrorCandii Inc.

Modem is not the same, but I am assuming the roms that doesn't include a modem will not replace the one you have now
Sent from my SGH-T889 using xda premium

AngryDinosaur said:
Modem is not the same, but I am assuming the roms that doesn't include a modem will not replace the one you have now
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Yea, I just asked someone in the Jellybeer thread if I had to worry about that, or flash a modem, or kernel. To be on the safe side.... if so, Mmm..... back on AOSP, is going to feel so good. Lol
TerrorCandii Inc.

I too am running jellybeer and it is great it will do for now till whitehawkx and cmenard relese a nice shiny new AOKP rom for us (fingers crossed) it has some AOKP features in it. All I have to say is read read read and when you are done and think you got it read again. All the info is in the the first few posts of a rom thread. just make sure that there is no modem mostr devs do not include a modem but I have notices a few that are starting to put one in so just watch if they do they usually say so because like I said it is not standard pratice.
I do have a question I have not flashed any touchwiz att roms only the unofficial cm10 and jellybeer. So on the TW roms do you have to flash o tmo kernel? The reason I ask is because on the s2 the main difference was the rotation. It was always messed up so the way to fix it was to use a tmo kernel or vice versa . Until someone made a .zip that fixed that and the device name in the build.prop so is that the same situation here.. It doesnt sound like it.
And one m ore question while I am here I posted a question in the q&A thread if anyone knows the proper lcd density. I dont like the way jellybeer is it has small fonts on the phone but everything in the market is way too big and it is driving me nutts.

mojorisin7178 said:
I too am running jellybeer and it is great it will do for now till whitehawkx and cmenard relese a nice shiny new AOKP rom for us (fingers crossed) it has some AOKP features in it. All I have to say is read read read and when you are done and think you got it read again. All the info is in the the first few posts of a rom thread. just make sure that there is no modem mostr devs do not include a modem but I have notices a few that are starting to put one in so just watch if they do they usually say so because like I said it is not standard pratice.
I do have a question I have not flashed any touchwiz att roms only the unofficial cm10 and jellybeer. So on the TW roms do you have to flash o tmo kernel? The reason I ask is because on the s2 the main difference was the rotation. It was always messed up so the way to fix it was to use a tmo kernel or vice versa . Until someone made a .zip that fixed that and the device name in the build.prop so is that the same situation here.. It doesnt sound like it.
And one m ore question while I am here I posted a question in the q&A thread if anyone knows the proper lcd density. I dont like the way jellybeer is it has small fonts on the phone but everything in the market is way too big and it is driving me nutts.
Click to expand...
Click to collapse
That i dont know, all the note II has the same hardware, correct me if im wrong. so i dont know if flashing a tmo note II kernel with a Att TW rom will work. but CleanRom is using Persus, and i think Tmo N2 has Persus kernel, so maybe it will work

Here it is guys, i took the risks with my heart pounding every second when it was installing and booting
Using CleanRom by scrosler, here is the link
I flashed the rom, in aroma, i choosed ATT as the carrier and persus kernel, then the rest is pretty self explanatory
then i flashed Tmo modem and Tmo Persus Kernel
it booted and it is running, i powered it off and took out the battery to test if it will power back on again, and indeed it did

Clean rom works perfectly without a flaw.. no need to install any kernel,modem or anything .
Sent from my SAMSUNG-SGH-I347 using xda premium

+1
Worked flawlessly using telus as the install option.
Sent from my SAMSUNG-SGH-I317 using xda premium

Can I 1-click a previous repack?

So I installed an EL29 repack on my boss' phone and I was thinking about getting him up to date on GB08. Can I just 1-click over the top of what he has? Or do I need to unroot him first?

edufur said:
So I installed an EL29 repack on my boss' phone and I was thinking about getting him up to date on GB08. Can I just 1-click over the top of what he has? Or do I need to unroot him first?
Click to expand...
Click to collapse
One clicks clear everything. It will do no harm to use that. Now if you were planning to flash a custom ROM in CWM, that would be different.

Are you flashing the entire ROM and modem? Jb kernels and modems will not work with ics or gb.
You'd have to read the threads associated with the builds to find that out though...
Seems like a lot of questions that have obvious answers from someone with your "experience"
Why not flash him to CM10?
Sent from my SPH-D710 using xda premium

Stryke_the_Orc said:
Are you flashing the entire ROM and modem? Jb kernels and modems will not work with ics or gb.
You'd have to read the threads associated with the builds to find that out though...
Seems like a lot of questions that have obvious answers from someone with your "experience"
Why not flash him to CM10?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Haaaaaaaaah! Lol.
Pp.:beer::thumbup:
sent from a jellybean filled epic touch.